How do you export the cover layout to print as it does in iphoto

Ok here goes, in iphoto, whilst you have the workspace open, you can right click on the workspace and a drop down list of options opens. If you save to pdf in this window, the cover opens up as a single page double spread layout and this can then be sent off to a third party vendor to print the books. In Aperture however, this function does not seem to be available and it only saves the cover pdf as two separate pages in the pdf. Does anyone know what to do to get it to do the same as in iPhoto.
I hope this is understandable.
Don

Hi Don,
The row list, as you call it, is just an aid during document development. It is designed to disappear when you take the focus off the table, and never shows up in a printout. If you need the row numbers in your printout, add a column with the numbers in it.
Jerry

Similar Messages

  • HT3384 How do you set the text layout in Pages on the vertical? How do you center the text?

    How do you align the text vertcially?

    Stru,
    You posted your question in the Pages (word processor) discussion area. Hope you can find your way back to Excel without any difficulty. The answer wouldn't have been much different had you posted in the Numbers discussion.
    Jerry

  • How do you change the page format to print a larger area?

    Hi there, another new to mac and new to numbers guy.
    I'm trying to find the windows equivalent to change page format.
    I want to reduce the blank border surrounding my table and print a larger area. How do you reduce the blank border that prevents you from printing up to the paper edge?
    cheers

    Page margns in Numbers are set in the Layout Inspector.
    Open the Inspector and click the Layout button.
    Edit the four margin settings as you wish. Reduce the (page) header and footer settings to zero if you don't want to include running headers or footers on your pages.
    Note that margins will be limited by the capabilities/settings of your printer. Printing to the edges of the paper usually requires a choice to be made in the Print dialogue as well as for the document itself.
    Regards,
    Barry

  • How do you change the folder layout in WebDB Site Builder?

    Hello,
    When multiple subfolders are added to folders, they are formatted from left to right in the content area of the WebDB Site. I want the folders to appear in a list, how can I change the layout?
    Regards,
    Lindsay Fraschilla

    The folders in my content area are already displayed, I just want them to be displayed vertically in a list not horizontally. My folders appear like this:
    a b
    c d
    I want them to appear like this:
    a
    b
    c
    d
    Any ideas?
    The 'multiselect option' below that you referred to only alows you to select the order of the folders and if they are displayed or not.
    Thanks
    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by jerry madrigal ([email protected]):
    in your home page (root folder), edit the folder properties, choose navigation bar. be sure that the 'folder links' are selected and choose the desired folders to be displayed in the next 'multiselect option' below. You can also manage different folder links in each folders..<HR></BLOCKQUOTE>
    null

  • How do you change the cover of a project with iMovie 10.0.1?

    Hi, I would like to change the cover of my project made ​​with iMovie 10.0.1, is it feasible?
    Many thanks
    Alberto

    This video shows the solution...! It is quite funny actually.
    iMovie 10 Tutorial - How To Set The Video Picture Poster frame
    https://www.youtube.com/watch?v=S1GNZOcdoDY

  • How do you set the Crystal Report Viewer Printer to Duplex

    Using the code below I can print in duplex mode, but this does not let me view a report before printing
    How do I set the Printer in the Viewer Control Bar of the Crystal Report Viewer to Duplex Printing programmatically rather than having to manually select Duplex through the preferences option?
    I have searched but the only example code I found produces errors in the code and will not run
    Private myReport As ReportDocument
    myReport = New ReportDocument()
    myReport.PrintOptions.PaperSize = PaperSize.PaperA4
    myReport.PrintOptions.PaperOrientation = PaperOrientation.Portrait
    myReport.PrintOptions.PrinterDuplex = PrinterDuplex. Vertical
    myReport.PrintToPrinter(3, False, 0, 0)
    In my VB6 Project that I am converting to VB.NET when I added Report.PrinterDuplex = crPRDPVertical, this allowed me to view the report and then print with Duplex without having to set the Print Preferences manualy
    I found 1386475 - How to set printer name and print job title at runtime using Report Application Server SDK for Visual Studio .NET
    But this causes errors
    Imports CrystalDecisions.ReportAppServer.ClientDoc
    Imports CrystalDecisions.ReportAppServer.Controllers
    Dim boReportClientDocument As ISCDReportClientDocument
    Dim boPrintOutputController As PrintOutputController
    Dim boPrintReportOptions As New PrintReportOptions
    Edited by: DavidMills on Feb 18, 2011 11:58 AM

    Hi David,
    You can mix both engines, just declare them both with different report object names. Here's all of my references:
    using System;
    using System.IO;
    using System.Xml;
    using System.Drawing;
    using System.Collections;
    using System.ComponentModel;
    using System.Windows.Forms;
    using System.Data;
    using CrystalDecisions.CrystalReports.Engine;
    using CrystalDecisions.Shared;
    using CrystalDecisions.ReportAppServer.ClientDoc;
    using CrystalDecisions.ReportAppServer.Controllers;
    using CrystalDecisions.ReportAppServer.ReportDefModel;
    using CrystalDecisions.ReportAppServer.CommonControls;
    using CrystalDecisions.ReportAppServer.CommLayer;
    using CrystalDecisions.ReportAppServer.CommonObjectModel;
    using CrystalDecisions.ReportAppServer.ObjectFactory;
    using System.Data.OleDb;
    using CrystalDecisions.ReportAppServer.DataSetConversion;
    using CrystalDecisions.ReportAppServer.DataDefModel;
    using CrystalDecisions.ReportSource;
    using CrystalDecisions.Windows.Forms;
    using System.Data.SqlClient;
    using System.Runtime.InteropServices;
        public class frmMain : System.Windows.Forms.Form
            CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
            CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument rptClientDoc;
    My file open dialog:
            private void btnOpenReport_Click(object sender, System.EventArgs e)
                rptClientDoc = new CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocument();
                openFileDialog.Filter = "Crystal Reports (*.rpt)|*.rpt|Crystal Reports Secure (*.rptr)|*.rptr";
                openFileDialog.FilterIndex = 1;
                 if (openFileDialog.ShowDialog() == DialogResult.OK)
                      btnOpenReport.Enabled = false;
                      btnSaveRptAs.Enabled = false;
                      object rptName = openFileDialog.FileName;
                    try
                        rpt.Load(rptName.ToString());
                        rptClientDoc = rpt.ReportClientDocument;
                    catch (Exception ex)
                        MessageBox.Show("ERROR: " + ex.Message);
                        return;
                    MessageBox.Show(rptClientDoc.MajorVersion.ToString() + "." + rptClientDoc.MinorVersion.ToString());
                        MessageBox.Show("Report opened.","RAS",MessageBoxButtons.OK,MessageBoxIcon.Information );
                        btnOpenReport.Enabled = true;
                        btnSaveRptAs.Enabled = true;
                    //MessageBox.Show(rpt.RecordSelectionFormula, "my record: ", MessageBoxButtons.OK, MessageBoxIcon.Information);
                    MessageBox.Show(rpt.ReportRequestStatus.NumberOfPages.ToString(), "Number of Pages: ", MessageBoxButtons.OK, MessageBoxIcon.Information);
    As for the page number I use it off the Engine report object:
    MessageBox.Show(rpt.ReportRequestStatus.NumberOfPages.ToString(), "Number of Pages: ", MessageBoxButtons.OK, MessageBoxIcon.Information);
    And it works for me...
    Thank you
    Don

  • How do you stop the "alignment" after every print job?

    We got this printer because at first received great reviews, it had a fax, copier and printer.  However, as discussed in another forum, we are wasting color ink when we print in black/white.  I just installed a magenta and already it has lost 1/4 of the ink for "aligning".   Is it set up in the programming to align after print job?  I"m so over this!  I have to hit cancel then wait 4 min for it to cancel.  I have algined and everything is ok, not sure why after each print job.  I followed "HPs guidelines" on the program but there is nothing there to address this issue.  Any help or thought would be greatly appreciated!
    Thanks!

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • How do you change the page layout for number

    When I print a spreadsheet I have created in numbers the header & footers are quite large. Is there a way to change the header & footer size?

    Yes, you can change the position. Do it in Master Layouts. Select the page number - a red box appears around it - select: left, center, or right justification. That will move it within the box. To move the box on the page, just drag the box to where you want it. - Fabe

  • I bought the heavy duty case for the i phone how do you remove the cover

    I just bought the iphone 4 s today I also bought the heavy duty case the sales person put the case on. how do I get it off

    How should we know? There are dozens of "heavy duty" cases on the market.

  • How can you export the contacts from a old web-Mail to the Mac mail?

    Hey,
    I got a New Mac book pro.
    I registered me in Mail with my web.de Account, everything wenn well.
    But when i want to Write a new Mail, my old contacts are not saved so i have to type the Email full.
    pls help me
    ty so far

    originally before I got my iPhone 4 a few years ago, I had a LG phone and plugged into my computer, use the Windows program called BitPim  that would extract into a .csv file to get them into my Contacts on my computer, then transfter into Itunes and sync from there.

  • With newest version of numbers how do you remove the page number when printing?

    I have the newest versin of numbers, just downladed it and now i can't get rid of the page numbering when i go to print??  Please help

    Thank You.  That was so simple.  Just in the other version you could just click it off.  I appreciate the help

  • How do you export APEX report results to XML template

    Hello all,
    I would like to export the results of a report to an XML template(CSV removes leading zeroes which doesn't work for us) Where do you store the template and how do you export the report results to it?
    Thanks

    Hello, since you say it's just a question of formating why you want to use xml instead of csv maybe you wanna have a look at this thread:
    CSV Download Changing Text to Number
    There they are discussing the aspects of leadings 0.
    Regards, Tine.

  • How do you remove the case to upgrade the ram for a dm-1 4142 pavilion notebook.

    How do you remove the cover to upgrade the rem for a Pavilion DM-1 4142? Does it just snap off?

    Is this the HP Pavilion dm1-4142nr?
    The RAM bay is generally on the bottom of the notebook. See the RAM Upgrade Guide for details.
    Larry
    Please click the White Kudos star to say thanks for helping.
    Please mark Accept As Solution if my help has solved your problem.

  • How do you export a song in logic pro x. ive tried now for 2 hours to do it and all it gives me and indivial files when i want the whole thing as a project

    how do you export a song in logic pro x. ive tried now for 2 hours to do it and all it gives me and indivial files when i want the whole thing as a project

    Go here:
    http://help.apple.com/logicpro/mac/10/
    Search on   Bounce

  • How do you export projects to iDVD in the latest iMovie version?

    How do you export projects to iDVD from the latest iMovie version?  (It used to be a simple click on share!!)

    You need to "Share to file" and pick the 480 or 540 size.
    Use this file with iDVD.

Maybe you are looking for