How do you extend the period of a trend line of a graph?

Hi, I am having trouble extending the trendline of a graph. Can someone please tell me how to extend the period of the trendline?
Thank you.

Hi wildgherkin - have a look at this very good, cheap app that does what you want and more. It is fully compatible with imovie. You can export the file directly into an iMovie project if you want.
http://www.rqs.ca/RollingCredits/

Similar Messages

  • How do you extend the guest network on a time capsule to an apple express?

    I have a time capsule in my main house with a password protected guest network i set up an apple express in the guest house to extend the networks. Unfortunately the guest house / apple express is only amplifying the main house network. I would like my tenant to join the guest network from apple express. Is that possible?
    How do you extend the guest network on a time capsule to an apple express?

    I would like my tenant to join the guest network from apple express. Is that possible?
    Sorry, but Apple does not allow the Guest Network to be extended in any way.

  • How do you extend the frame from one side but not the whole thing?

    I am updating my blog and want to put a rectangle picture into the pre-set frame. I need to stretch it horizontally but the entire frame (i.e., both sides and top/bottom) stretched instead. How do you extend the frame from one side but not the whole thing?

    In Inspector, select the Graphic Inspector. Choose, from the Fill options, Image Fill. Select the image from the dropdown and click Open. Now go back to Inspector and click on Scale to Fit. Choose from the options in the window. There are a number of them which should address your problem:
    With the Blog template, you will probably need to insert a text box over the stock placement frame and work with that instead.
    Mark

  • How do you extend the time of a rolling credit?

    I'm working on my wedding dvd, and I am including a rolling credit that lists all of the guests to be pasted at the end of the movie. The problem is when I include more and more people to the list, the lettering gets smaller in a bid to fit all the text in to a certain time frame. Obviously, the credits should be allowed to run for a lot longer to allow for the extra text. Is there a way of extending the time that the credits last for. I have tried dragging it, have fiddled with the scroll time (58 secs I think, not long enough for what I want to do.) Is it possible to do, or is this way to ambitious for this particular program. If so, would Final Cut do it?

    Hi wildgherkin - have a look at this very good, cheap app that does what you want and more. It is fully compatible with imovie. You can export the file directly into an iMovie project if you want.
    http://www.rqs.ca/RollingCredits/

  • How do you extend the reception range on a Time Capsule?

    Live in an older home and looking to extend the wifi range of my Time Capsule.  Any advice?

    You need to buy another Apple router.. express, extreme .. I guess even another TC.. and run it in extend wireless mode.. this is  just wireless repeater by another name.
    Better is to run ethernet and use a second Access Point.. AP which can be any brand under the sun. Faster and you can buy stuff that actually will cover the whole house.. the fact of the matter is, Apple Routers are NOT wifi power houses. They are mediocre at best.

  • How do you extend the audio track on the menu to keep playing?

    I am new to using DVD studio Pro 4. I created a menu with a video clip from one of the short films on the DVD. I set it as the asset for the dropzone using the Panes Rectangle Frosted Window 1. The duration of the menu is 30 seconds and then it ends in the last frame of the clip with a still. I have an audio track playing and I want it to continue playing over the still (after the video clip has finished) until someone navigates away from the menu. Any advice on how to do this? Thanks so much!

    Unfortunately to do that you would have to edit the clip you want and then have the still at the end actually extend to the end of the audio (so it would really be a still at all but you would create it in Final Cut so it looks like a still - if that makes sense)
    Basically the Video and Audio have to be the same length and then the menu loops back. You can't have the visual part of the menu stop at the end as a still and the music continue. You can only fake it so it looks that way

  • How can you extend the signal range of time capsule

    I have a time capsule in my office down stairs, and my apple tv upstairs, but the signal strength is very week (only one bar) so when I try to stream a movie is very slow. There is some thing I can do or buy to make the signal stronger??
    Thank you.

    You can add an AirPort Extreme to "extend a wireless network" to improve the wireless signal. Locate the AirPort Extreme approximately half way between the Time Capsule and the Apple TV.
    Setup instructions are here:
    Extended network

  • How do you extend the exclude command to subcategories?

    In my PSE 6 organizer I have tagged my photios and have various subcategories under a master category. The exclude command only excludes photos in the top directory not to subcategories.

    Thanks for the clarification.
    First, you need to make sure that the TC is configured correctly.
    o Temporarily, connect an ethernet cable from your computer to one of the LAN <-> ports on the Time Capsule.
    o Open AirPort Utility - Click Manual Setup
    o Click the Wireless tab below the row of icons
    o Make sure that a check mark is entered next to "Allow this network to be extended"
    o Update to save changes
    o Disconnect the ethernet cable after the TC has restarted
    Next, move the Express close to your computer
    o Temporarily, connect an ethernet cable from your computer to the AirPort Express
    o Open AirPort Utility - Click Manual Setup
    o Click the Wireless tab
    o Wireless Mode = Extend a wireless network
    o Wireless Network Name = Same name as your TC network
    o Enter a check mark next to "Allow wireless clients"
    o Wireless Security = Exact same setting as your TC network
    o Wireless Password = Exact same password as your TC network
    o Confirm Password
    o Update to save settings
    o Disconnect the ethernet cable and move the Express to the desired location approximately 1/2 to 2/3 of the distance from the TC to the area that needs more wireless coverage. Minimize any obstructions in the signal path.
    o Power up the Express in the new location

  • HT3775 how do you extend the QuickTime player play the videos I want to watch which have a different media format on a MacBook Pro?

    I'm tying to watch a video which is on a website to help with my revision.
    As I try to open it, it keeps coming up with a message saying the format the clip is in is something the QuickTime player doesn't understand!
    How do I overcome this so that I can watch the clip?

    Based on what you're saying I'm guessing you don't have the iDVD software. But fear not, there's an alternative to iDVD, called Burn and it's free. So downloadn and install Burn, first. Then from iMovie go to Share Menu > Export Movie... and choose Large size. Save the movie to the Desktop. You'll have a .m4v file that can then be burned to DVD using the Burn software.

  • How do you change the timeline duration in Photoshop CC?

    There seems to be 5 second limit on the duration of the timeline in Photoshop version 2014.
    How can you extend the duration of the animation? There's a timeline window, but no "animation" window as mentioned in many of the help files.
    How do you change the duration in Photoshop  2014?
    I'm using Windows 8.1 as my OS.
    Thanks.

    Thanks for the reply, but my point was not about the lack of creating animations.
    It seems that in Photoshop CC, you cannot change the duration of the timeline unless you click on the end of a clip and drag it out which will then give you more time.  As the original post mentioned, you automatically get a 5 second duration unless you have a video clip that is of longer time.  This all makes sense for videos, I understand that nobody (usually) wants to stretch video.  Video by nature will extend the timeline based on how much footage is present.
    Now take an animation scenario where you want to create something from scratch that spans longer than the default 5 seconds.  There is no option!!! No document settings, nothing that will allow you to extend the timeline.  I now have to click and drag each layer clip on the timeline to give it more time for the animation, one by one might I add (you can't even highlight multiple clips and extend them all at once, which is crazy).
    So what does this mean?  Well if you create a mockup of something with all of these intricate layers including backgrounds, copy etc. and you only intended to animate a certain piece for say 8 seconds, you'll have to extend each and every single layer clip in the timeline otherwise they will magically disappear and the only thing displaying is that which you have extended manually.
    The reason why you need a document settings in the timeline is to prevent content from disappearing if something extends for a certain amount of time.
    Frame by frame animations only allow for so much functionality, try to animate multiple objects at once with frames and go back and make a change to one part...
    CS5 would simply show everything regardless if they did nothing on the timeline, it allowed you to see all of your elements present.
    Again, I stand by my statement saying that the new timeline is flawed.

  • How would you find the pitch period of a sound signal?

    Hi
    I have a few questions and i would like if somebody could help me even with the smallest comment on this.
    How would someone be successfully estimate the pitch period (fundamental frequency) of a 5 second sound file?How would you successfully distinguish the voiced from the unvoiced parts and how would you make sure you dont mix voiced/unvoiced sections? Finally how can you find the exact points where the pitch is at its peak throughout the signal?
    Any help/comment/suggesion would be much appreciated

    Hello Madgreek,
    After some thought I think I may have come up with an algorithm for what we have discussed. Basically, you are interested in knowing the time intervals over which you can observe any given frequency in your signal. As you had suggested, you can examine small windows of your signal and perform FFTs on each of the small windows to determine what frequency content is contained in that window. By examining all of the windows, you will see when particular frequencies are prevalent in the original signal. You'd want to use the smallest allowable window to give you the most resolution, but one that is large enough to cover an entire period of the lowest frequency (so that you don't miss this frequency).
    I have attached an example program that performs this operation. The example performs this analysis on an array that represents audio data. I am basically performing multiple FFTs (for each window) and stacking these FFTs in time to form a 3D plot. By examining the 3D plot, I can then see when in time my frequencies of interest are at their peaks. Rather than graphing these plots, you may work out a different algorithm for programmatically determining and logging these peaks and times. I hope this is what you were looking for!
    Attachments:
    Time Variable FFT.vi ‏250 KB

  • Sent iphone 5 3x for repair ( 1 repair and 2 replacement ) in a span of 2 months.. And i just ask apple care to extend the warranty of my replacement iphone 5 for 6 month, i mean how can you trust the 2nd replacement if the 1st replacement didnt last long

    Sent iphone 5 3x for repair ( 1 repair and 2 replacement ) in a span of 2 months.. And i just ask apple care to extend the warranty of my replacement iphone 5 for 6 month and they reject it,  i mean how can you trust the 2nd replacement if the 1st replacement didnt last even for just 1 month? Really dissapointed!!

    No, really just want to voice out my dissapointments with apple care.. Im just really ****** off..

  • How can you automate the monthly opening of MM periods

    How can you automate the monthly opening of MM periods ????????????

    RMMMPERI accepts a period/year or a date.
    If you enter a date the period is derived by it.
    1. create a variant and check the attribute 'selection variable' for the parameter date. Then click the button 'Selection variables' and set the current date. Every time this variant is used the parameter DATE is filled with the current date.
    2. create a job for RMMMPERI with the variant created in the preceding step. Set it as periodic.
    If you're not using a fiscal year variant simply schedule it as monthly (to be executed the first day of the month).
    If you are using a fiscal year variant you'd have to define a calendar with only the first day of each period defined as working 
    day and use it in the periodicity restrictions.
    Another possibility:
    Write a very simple ABAP which run daily to check if the period has changed and submit RMMMPERI.
    Regards
    Chander

  • How do i extend the bandwidth of my system

    The control problem I am having is extending the bandwidth of a force control system. The system is used to apply mechanical load to bone to facilitate research into Osteoporosis. The following concisely describes the system and the different things I have tried to solve the problem,. I imagine it is quite lengthy compared to the usual questions but any advice you have to offer to a Mechanical engineer would be much appreciated.
    System Description:
    I am using Labview (with Flex motion) to program the NI 7344 motion control servo board (PID update rate of 62.4 micro-seconds). This output signal is then amplified by the MID 7654 power amplifier, supplying current to a Voice coil (this can be considered as a Linear DC motor with a bandwidth of 40Hz). This applies the force to a bone sample. Feedback is then provided by a load cell and connected to the ADC feedback channel of the servo board. (For full specs of all mentioned components please refer to the web links which are listed at the end of this email!)
    Problem description:
    After optimally tuning the PID characteristics and defining the amplitude and pre-load, I can successfully control a continuous, sinusoidally varying force (frequency 1Hz), however when I try to increase the frequency to 10Hz, the amplitude of the output waveform is marginally reduced�i.e. there is attenuation. I know that the bone sample is not viscoelastic enough to act as a low pass filter. The bandwidth of the Voice coil is not a limiting factor either, so�..
    How do I extend the bandwidth of this system?
    The following Paragraph describes some of the things I have tried, which have had some or no influence. Being a mechanical engineer I would be grateful for any expert advice.
    (Note all results have been verified with an oscilloscope where applicable)
    Influential Factors:
    1) Method of programming.
    To generate the wave form a series of points describing one period are written to a circular buffer on the servo board. The points are executed in 10 milli-second intervals and are splined through using a cubic spline algorithm (hence a period described by 100 points gives us a frequency of 1Hz and a 10 point wave gives us 10Hz). All this happens on the servo board in real time. I am confident that although the integrity of the sine wave is reduced at 10 Hz the amplitude is still described within the 10 points and so is not the reason for attenuation. However this does limit the maximum frequency achievable. (I would say the max frequency is about 20Hz)
    2) Redefining the resolution of the of the ADC Feedback
    The 12 bit ADC feedback channel is scanned at a rate of 50 micro seconds (faster than the loop update rate which is 62.4 micro-seconds). Initially the voltage range was specified at -/+ 10 V giving 20/(2^12) Volts per significant bit, however I noticed that when I increased the resolution to the max possible by changing the range to 0-5 V (giving 5/(2^12) volts per significant bit), the amount of attenuation was reduced, however there was still some attenuation there. This begs another question why would this factor improve the frequency response???
    3) PID characteristics
    The system gives an optimum step response when using only a pure integral term and setting Kp= 0, Kd= 0. It seems as though the fastest step response is limited to about 6 milli-seconds. The system is fine tuned and any slight increase in the integral term results in immediate instability. Therefore there is no scope to improve the system bandwidth by altering the PID characteristics.
    Can you offer me any expert advice?
    Considering this information, what would you advise? Do I need a board with a faster loop update rate ?, I have considered using Labview Real Time, which offers a board with a 26 KHz update rate as apposed to the 16Hz (62.4 micro-seconds) provided by the current board). Do I need to use different control algorithms as apposed to PID, if so which ones???
    Any help or advice you have to offer would be much appreciated and could help in the battle against osteoporosis. Should you require more information or would like to speak to me send me an email and I can answer any further questions or give you a ring.
    Regards Duncan Webster
    Email: [email protected]
    Product specs:
    Servo board:
    http://www.ni.com/pdf/products/us/4mo636-637.pdf
    Power amp
    http://www.ni.com/pdf/products/us/4mo642-643.pdf

    Hi Duncan,
    i'm sorry that this answer took this long, but i think a constructive answer which takes a long time is better than a useless answer in a short time....
    For the following thought-provoking impulses we have to consider the signal-change when increasing the frequency. The points which describe the signal get streched over the period. Increasing the frequency enlarges the distance between the points.
    a) The spline algorithm could be the problem here hence the signal does not correctly pass through the points anymore with increased frequency. Therefor the amplitude decreases with increased frequency. Perharps another kind of spline algorithm can be helpful.
    b) Another point can be the control deviation. Since a feedback control system needs a devia
    tion for the control, the deviation gets larger when increasing the frequency of the controlled loop. Maybe the control loop has to set the desired value when already getting to a new point. So the signal could get "washy" and the maximum amplitude is reduced.
    In this case, the "Velocity Feedforward"-parameter could be of use. This parameter is to use with caution for it can have similar effects like a too high chosen integral term.
    c) You can try to set the 7344 to circular contour. Therefor use 2 axis where you use the second axis as dummy (open step). There is a major disadvantage in this setup: since you use 2 axes at the same time, the 7344 can update each axis only with 125 microseconds. But perharps this is sufficient. Either way the parameter of the control loop have to be adapted (integral term reduced).
    d) If the 125 microseconds describend in c) is insufficient, you can try to test it with a 7352. The 7352 can handle 2 axis at a time with a update rate of 62.5 microse
    conds for each axis.
    I hope this answer helps you in solving your rather special issue.
    -Norbert
    NI Germany
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • How do you get the web application path from the servlet?

    I have created a web application which is installed in
    /webapps/myApplication
    /webapps/myApplication/data/users.xml
    /webapps/myApplication/WEB-INF/classes/myServlet
    How can you get the path to the "users.xml" file from the "myServlet" file?
    The code below doen's seem to return the xml file. anybody knows why?
    public class myServlet extends HttpServlet {
    public void doGet( HttpServletRequest req, HttpServletResponse res ) throws ServletException, IOException
    File myXmlFile = new File("/data/users.xml");

    Try this..
    String FileName = getServletContext().getRealPath("\\data\\users.xml");
    File myXmlFile = new File(FileName);
    hope this helps..

Maybe you are looking for