How do you fade a single track?

im trying to fade a brass section track in a piece im doin , how do you just fade a single track in logic express? all the info i found is how to do the entire song not just a single track? thanks

select the track in the Arrange window, and go to View. enable Hyperdraw/Volume. click the gray line, and pull the dot downward. experiment!

Similar Messages

How do you move a single album, and not the whole library, in iPhoto to an external hard drive?

How do you move a single album, and not the whole library, in iPhoto to an external hard drive?

File -> Export to a folder and copy it over.
That will give you a folder with the images. There is no way to move an album outside of iPhoto. You would need to have a library containing it.
Regards
TD

How do you fade text in and out of a still image on Adobe Premiere CS6?

How do you fade text in and out of a still image on Adobe Premiere CS6?

Creating and editing titles

How do you make one long track into multiple tracks?

How do you make one long track in itunes into multiple tracks? Is there a way to do that?

I found another solution too through Garageband. I don't know if it was easier, but I liked this way of creating seperate tracks.
First, You put the long track into Garageband.
-then you create a New Basic Track under Track Tab-create as many of those as tracks you want to make
-also make sure the headphones button is lit up under each New Basic Track-this allows it to be a 'solo' track.
-then you can start cutting music-with the long strip find where you want to split into a new track and drag that half down into each New Basic Track.
-Once you are done, press Option Z and a purple little triangle will appear up by the measures. drag the triangle to the end of the first track-this allows it when sharing to itunes to just record the particular track you want, it puts a stop/end to that track.
-then, make sure the track you want to share is highlighted the bright orange and go to share, 'send to itunes'
-it will send that to itunes and you can rename it in itunes.
-Go back to Garageband-delete the first track you successfully shared and move the next one up to where that one was. Slide it accross to the left so it is at the beginning, press option Z and move the purple triangle where you want it to be...and you are good to repeat until all your tracks are done!
I am a very visual person, and this helped to see where I was cutting each track, just another way!

How do you add a stock tracker and weather to the notification center?

How do you add a stock tracker and weather to the notification center?

You can not. This is only a feature of iOS. It would only be supported via the dashboard on OS X

How do you combine 2 mono tracks into a single stereo track?

Question here:
How do I combine 2 mono tracks into a single stereo track in Logic?
I recorded using my left and right out of my keyboard to a hard-disk recorder (Korg d888). The files are made as two separate wav files. Is there way to combine these in Logic so I can treat it as one stereo track?
I have several files to do and am hoping Logic has something like a "combine tracks to stereo track" tool or something.

Solo both tracks and bounce them with no effects and faders at 0 dB.

How can I export a single track in Soundbooth CS5?

Greetings,
I have built up a single track in Soundbooth composed of several repeated clips. I wish to export this single track.
How can I do this in CS5 Soundbooth?
Thanks,
folsombob

Sorry nobody has answered this. I haven't been in this forum in a couple of weeks.
If you have all the tracks right where you want them, are you able to save the file as an mp3?
Are you looking to export it for web use?
For video tracking?
I'm not sure why you'd want to export it as opposed to saving in one of the many available formats.

How to apply FADE to audio track

Just moved to use Logic Pro 8 that I have the following queries:-
1. How to apply FADE/CROSSFADE on audio tracks at the Arrange window?
2. I found keeping to click the Pointer tool & Scissor tool (or Eraser) alternately (the purpose is just delete a part of an audio track) at the Arrange window during audio editing very clumsy, is there any shortcut?
3. I use a MOTU 2408 audio interface, is there anyway I could set the Logic to having:- A. just one mono output instead of stereo pair ( likes 12, 34, 56, or 78) for a track? B. input of a stereo track set to using S/PDIF as my 2408 have this and I sometimes dump things into the computer from a DAT player?
Thank you for your advise.

NNS wrote:
1. How to apply FADE/CROSSFADE on audio tracks at the Arrange window?
You can use the fade tool, or for multiple regions, simply select the regions (you can rubberband them), and use the fade tool box in the upper left hand corner of the arrange page.
NNS wrote:
2. I found keeping to click the Pointer tool & Scissor tool (or Eraser) alternately (the purpose is just delete a part of an audio track) at the Arrange window during audio editing very clumsy, is there any shortcut?
Look over the extensive list of key commands that are available within Logic. You can also assign alternate tools to left/right mouse buttons, or by modifier keys, so you can switch tools quickly, without the need for accessing the toolbox.
NNS wrote:
3. I use a MOTU 2408 audio interface, is there anyway I could set the Logic to having:- A. just one mono output instead of stereo pair ( likes 12, 34, 56, or 78) for a track?
For mono output assignments, simply pan the mono track to the desired side of the output. i.e., track one, set to "Output 1-2", panned hard LEFT, will only appear on your audio interfaces output 1. Panned hard RIGHT, it'll appear only on output 2...
NNS wrote:
B. input of a stereo track set to using S/PDIF as my 2408 have this and I sometimes dump things into the computer from a DAT player?
All audio interfaces with SPDIF inputs have those inputs hardwired. So it's just a matter of you reading the MOTU manual, and seeing what that is. It may be inputs 11-12, or 23-24, etc... Just set the stereo track in Logic to have that particular input, and you should be set.

How do you change to single click to open files and folders?

How do you change from double clicking a file/folder, to single clicking (web style)?

Finder > Preferences
Turn it off it irks you. I find it exceedingly useful.

How do you see your Ipod track list in Itunes 7???

When you connect your Ipod to Itunes 7 all it shows is a summary page and not the track list.
How to you see the tracks on your Ipod manually???

iPod: How to find the serial number
Also if you go to iTunes>Preferences>Devices and hover the mouse pointer over the iPod backup the SN will pop up.

How do you "UNLINK" the audio tracks?

I have had LOGIC now for about 3 weeks. I am learning tons and enjoying the program overall. I have received some great help from this forum. My latest adventure is creating more audio tracks. I found out recently from this forum that I had the settings in my LOGIC setup. I increased the number of audio tracks that I can use. My current question is, If I need more audio tracks in a project, I click on an audio track and then go to the Track>Create Multiple Tracks menu. I can import as many as I need.
The problem I am having is, when I create the tracks, they are somehow "linked" to whatever track that I clicked on when I choose to create the new tracks. I have tried changing the track and midi channels in the LH side of the arrange window, but when I change one track, the other one changes also. I don't know how to separate them. Is there some way to do that? ALSO>>>> Is there a way to create new audio tracks without having to click on an existing track first?
Thank you for your consideration.

The fastest way I know is to 1)- open the track mixer window, 2) click on the global button - to turn it on, 3) click on track button - to show all available tracks, 4) double click on an unused track, this will put a new track into the arrange window.
Turning off the global button in the mixer window and selecting the parts you want to display (Track, Instruments, MIDI, auxs, busses, etc) will show you the active tracks you have in the arrange window.
Regards
BB

How do you Rearrange Video & Audio Tracks?

I need to know how to arrange the stacking order of them

If you're asking if you can actually move the track so that track 1 appears above track 2, don't think you can do it. You can move the contents of the track pretty easily as mentioned in the other answer.
To add to Nick's post, you can add a track directly above a specific track by control clicking on the patch panel of the appropriate track (I think) and choose add track. And you can move a clip or series of clips directly above or below if the target track is empty in that section by selection it and then option-up (or down).
Message was edited by: Michael Grenadier

How to import CD as single track in iTunes 11.01?

The abilty to import CDs as a single track in iTunes was great for Dj mix CDs and the like. But there no longer seems to be the option in iTunes 11.01? Or am I overlooking something? Any advice would be appreciated.

No, you don't need to purchase iTunes Match to put CDs on your iPhone. You always have the option of syncing with iTunes using the cable that came with your iPhone.
See this page for more information on importing CDs:
http://support.apple.com/kb/VI106
There is a video tutorial and a number of links to related articles.
Best of luck.

How do you add a missing track number?

With the latest version of iTunes, 12.1.0.71, how do you add a track # to an mp3 if it is not there already? Right clicking and selecting Get Info doesn't seem to provide any way to do anything except modify existing fields. However it is often the case that you might want to add a field that doesn't yet have anything in it.

Most text fields can be edited in the various List views. Track and disc numbers are missing from most other non-music versions of Get Info. You might want to drop a line to iTunes Feedback with your reasons for wanting them back. In the meantime I've written two scripts that may be useful: SetDiscNumber and SetTrackNumber. Thankfully it is still possible to set values via script, even if it is a somewhat clunky workaround. Alternatively you could temporarily change the media kind.
tt2

How do you make a master track

Sorry if this is answered elsewhere, but I don't see any way to make a master track. What am I missing? I've imported two aiff into LE8. That is all there is in my arrange window, no output 1-2 to be found nor any button that says "create master track" as expected. Ail I have are the two tracks: output 1, and output 2. I have the output 1-2 in the mixer window, but when I switch to Arrange, it vanishes. Did a search in the Help for LE8 manual and, as usual, nothing. All I want to do is simply fade out two tracks and it is turning into an all afternoon affair. Thanks in advance for any help.
MGuilfoile

Select Out 1-2 in the mixer, and control-click on it. Choose "Create arrange track for selected channel strip" (or something like that - I'm not in front of Logic).
The same command is available in the Mixer's local menu too

How do you fade a single track?

Similar Messages

Maybe you are looking for