How do you find out if the transmitter and/or receiver leaves the session ?

So , how do you find out if the transmitter and/or a receiver leaves the session , is there an event when this happens ?

1. There is no list available from your end.
2. You can't actually check. If you suspect a device has been, deauthorize it twice and then authorize it.
(89509)

Similar Messages

  • How do you find out if the domain profile is active in the firewall?

    A script needs to determine if a firewall profile is active.  Does anybody know of a function to do this?
    The problem I a trying to solve is when a server boots it may not activate the domain profile.  It happens if the server is booted before a domain controller comes on line or if and adapter team is in use.  To solve this, I run a script at boot
    up that waits and then restarts the nla service and typically the domain profile will become active.  However it isn't fool proof.  I want to modify the script to verify that the domain profile has become active.  However, I cannot find a function
    to determine if the domain profile is active. Can someone help with this?

    Are you using something with PowerShell 4.0 that has the NetSecurity module? The second part of that question will be based on the version of the Windows Operating System. To check, try this: Get-Module -Name NetSecurity. If you do, you can based your logic
    around the Get-NetFirewallProfile and, perhaps, the Set-NetFirewallProfile cmdlet.
    Get-NetFirewallProfile -Name Domain
    Get-NetFirewallProfile -Name Domain | select Enabled
    Get-NetFirewallProfile -Name Domain | select -ExpandProperty Enabled
    (Get-NetFirewallProfile -Name Domain).Enabled
    To enable (or, activate) the profile, you can pipe your Get- cmdlet to the Set- version of the cmdlet.
    Get-NetFirewallProfile -Name Domain | Set-NetFirewallProfile -Enabled:True
    Without access to this version of PowerShell and this module, you'll either need to use netsh and/or WMI. I haven't checked myself, but I wouldn't be surprised if you can find something in the
    Gallery.

  • How do you find out what the font type is when you open a .eps file

    I've been sent a logo in a .eps file and I need to edit. However I can't see what font type has been used!
    Thanks Claire

    Claire,
    You may also try here,
    http://www.identifont.com/
    http://www.whatfontis.com/
    Or ask in the Typography forum,
    http://forums.adobe.com/community/design_development/typography?view=discussions&start=0
    Edit: Hi elDudereno.

  • How do you find out what information is in the 'other' section of itunes when iphone is connected

    How do you find out what information is in the 'other' section on the bottom of itunes

    You don't
    If it is much more than a gb or so, then it indicates corrupt files.  A restore should resolve.

  • How can you find out if your mac is infected with the flash back virus

    how can you find out if your mac is infected with the flash back virus?

    F-Secure's Flashback removal tool - http://www.f-secure.com/v-descs/trojan-downloader_osx_flashback_k.shtml - supposedly also works on OSX 10.5 and earlier.
    05 Apr 2012 How to Detect and Protect Against Updated Flashback Malware - http://tidbits.com/article/12918 - detection methods for multiple browsers and general information
    Leopard and earlier users see recommendations at: https://discussions.apple.com/thread/3872491

  • When your scratching your itunes gift card code and you scratch off the last two how do you find out what they were

    when your scratching your itunes gift card code and you scratch off the last two how do you find out what they were

    Invalid, inactive, or illegible codes
    http://support.apple.com/kb/TS1292

  • How do you find out the contacts that were updated via Facebook and twitter in the settings without having to figure it out manually?

    How do you find out the contacts that were updated via Facebook and twitter in the settings without having to figure it out manually?

    There is no such list of what is downloaded to each phone except in the backup. So if you have a recent backup of each phone you should be able to find an app that reads the backup files and would tell you what list is saved of the content on each phone.

  • How do you find out the answers to your security questions if you forgot them

    How can I find out what the answers to my security questions are?

    1)  Apple ID: All about Apple ID security questions
    If necessary
    2)  See Here... ask to speak with the Account Security Team...
    Apple ID: Contacting Apple for help with Apple ID account security
    3)  Or Email Here  >  Apple  Support  iTunes Store  Contact

  • HT4314 how do you decline an update, they do not show you the cost- how do you find out

    How do you refuse an update and how do you find out how much they are?

    Updates are free.
    There is no need to decline them, simply do not update.  Nothing will update unless you tell it to update.

  • I am trying to add my sons email address to our family apple id but it says that it already associated with another apple id. How can i find out what the apple id is and take his email address off that one?

    I am trying to add my sons email address to our family apple id but it says that it already associated with another apple id. How can i find out what the apple id is and take his email address off that one?

    You may be able to find your Apple ID at Look up your old and forgotten Apple ID

  • How do i find out if the server admin daemon is running

    Hi All,
    I've got an OS X server that for some reason ( probably due to me pratting around) has decided not to have a working server admin prog. I can fire up the client program and point it at any of the IP addresses that the server is looking at and then you get an error message basically saying that the server admin daemon is not contactable.
    So ...
    1). How can i find out if the back end daemon is running
    2). what port(s) does it listen on
    3). How can I turn on some logging to see what's happening when I run serve admin
    4). Any other tips as to how to find out why its not working
    Rgds
    Alex

    You should post this in one of the forums in the Mac OS X Server v10.5 Leopard category. You'll get better response there.

  • How do I find out who the BB provider is at my pro...

    brief history.
    Bought my existing property in july2012 .
    Ordered BT combined phone and BB package 2 with 40Gb and free calls August 8th 2012
    took BT 5 xweeks to connect my phone line although there was an existing line working at the house .?
    Also 5xweeks to connect the BTHub3 broadband.
    Today i learn that BT cancelled my BT broadband service over a month ago because there was a previous broadband provider still active at the property .
    I am now told that my BT router has been connected to an unknown ISP for the past 6x weeks ????
    How can I find out who the ISP is so I can cancel it as I cannot contact the previous property owner.
    BT have not advised me of any of this by the way. If I hadn't phoned today to query why I have no caller ID or answerphone service or email address and my number isn't ex dir as requested then I'd never have known

    If you go to www.speedtest.net it will display which ISP you're with in the bottom corner. There are a few other websites which tell you too but the URLs escape me at the minute
    Dean
    BTCare Community Mod
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • I have a new 16g nano and I have only added about 600 songs and I only have less than a gig left of space.  It says I have used over 9G of other.  I have no movies, pictures, tv shows or anything else on it.  How do I find out what the "other" is?

    I have a new 16g nano.  I have only added about 600 songs so far.  It is telling me that I 4.47G of songs and 9.92G of other and only 3.297MB of space left.  I have no tvshows, no movies, no pictures on the Ipod.  How do I find out what the "other" is and get rid of it? 

    You most likely have some corrupted files in other. Restore it and resync.

  • How do I find out where the missing filter is used?

    After upgrade, Premiere CS4 is complaining missing filter upon opening a CS3 project.  How do I find out where the filter is used?
    Thanks!

    When I have opened older Projects in later versions, I have gotten a very useful dialog screen, telling me of missing Transitions (exact name and TimeCode), and of missing Effects. Do you not get such?
    When you Open the CS3 Project, is any Clip flagged?
    Considering how well PrPro has picked up on missing 3rd party stuff, I would be surprised, that it did not give you all of the necessary info.
    Good luck,
    Hunt

  • I activated an iTunes gift card, my iPod showed the amount available ($15) and after downloading 2 songs all I had left was $.04.  Any ideas on what happened to my funds or how I can find out where the rest of the money went?

    I activated an iTunes gift card, my iPod showed the amount available ($15) then after downloading 2 songs my balance was $.04.  Any ideas on what happened to the rest of my funds or how I can find out where the rest of my money went?

    - Have youwent to yur iTunes account looked at your puchase history for purchases thant y might have forgotton?
    - Maybe you had an unpaid balance before redeeming the card.
    - Contact iTunes
    Apple - Support - iTunes - Contact Us

Maybe you are looking for

  • CSS :: IE and FireFox issues

    Hi. I am developing a website ( see here) using CSS which displays fine in IE. However, when I view it in FireFox, I have two major issues: 1. On all pages, the navigation bar seems to be stretched and hence the links become offset. 2. On the 'Info'

  • Create PO for Return Item

    Hi SAP Expert, i have scenario where our customer return the item to our service center, then we need to declare the item into the stock. can i create PO with set to zero price for this scenario or just create initial stock to declare the item into t

  • Power Mac G5 won't start up and is beeping

    Dear friends, This morning, my Power Mac G5 started to beep. When I try to restart it, it beeps some more and also makes a clicking sound like a metronome. The computer won't start up anymore. At startup, it displays a grey screen with a little folde

  • Receiver file with 2 extensions

    Hi, I had once come across a blog for placing the file in the FTP folder with 2 extensions (say .txt and .xml). Not able to find it now, can any one help me in finding the same? or say how can it be done. PS: I do not need michael's blog of sender an

  • OCP certification delivery

    Guys, I have passed my OCP one month before and still I didn't get my OCP certificate. I have maild to fulfilment complaining about this, thrice, but, no reply from them, just a default mail that we will respond you in two business days. I think they