How do you find the mac address for the Standby Supervisor

sho int mgmt0 works for the active but how do I get it for the standby on a Gen1 c9509 running 3.3.(1c) ?

I figured it out.
sho module x (where x is the slot number of the standby sup.) Here's the output:
The Standby Supervisor
switchname1# sho module 6
Mod Ports Module-Type Model Status
6 0 Supervisor/Fabric-1 DS-X9530-F1-K9 ha-standby
Mod Sw Hw World-Wide-Name(s) (WWN)
6 3.3(1c) 4.0 --
Mod MAC-Address(es) Serial-Num
6 00-0e-38-c5-bc-80 to 00-0e-38-c5-bc-84 JAB00000000
The Active Supervisor
switchname1# sho module 5
Mod Ports Module-Type Model Status
5 0 Supervisor/Fabric-1 DS-X9530-SF1-K9 active
Mod Sw Hw World-Wide-Name(s) (WWN)
5 3.3(1c) 4.0 --
Mod MAC-Address(es) Serial-Num
5 00-0e-38-c5-bf-64 to 00-0e-38-c5-bf-68 JAB00000001
The output is much nice on my ssh session.

Similar Messages

How do I find the MAC address for the time capsule?

I am trying to install 2T time capsule as my main router. Telus my internet supplier allows me to in install the MAC address for the static ip that I am going to use. But where is the MAC address on the cube or how do I get it?

On the bottom label it should list the MAC address.
If you happen to still run the original.. ie decent airport utility it has all that info right in front of you.
But you see that was before Apple reduced the airport utility to the status of a toy..
Pretty pictures no info.. think kid's book.
See very very pretty.. as a UTILITY though.. useless.

How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?

How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?

You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

How do I find the Mac address for my 8900?

I have a wireless network and can't connect to it at all. I have looked and typed in Blackberries search engine and came up with nothing, only answers are about a MAC computer, not what I am looking for.
I have to add the Mac address to the wireless network in order to get past the firewall and this is not working for me, any ideas.
Thank you,
Animal
Raising teenagers is like trying to nail
jell-O to a tree!

Found it,
Overview
To find the Media Access Control (MAC) address of a Wi-Fi® enabled BlackBerry smartphone, complete the following steps:
Click Options.
Click Status.
The WLAN MAC field displays the MAC address for the BlackBerry smartphone.
Raising teenagers is like trying to nail
jell-O to a tree!

Hi! How can I change the shipping address for the program of replacement of the 1 generation ipod nano? I've already received the empty box and now I should send back the old ipod but I'd like to receive the new one to another address. Thank you.

Hi! How can I change the shipping address for the program of replacement of the 1 generation ipod nano? I've already received the empty box and now I should send back the old ipod but I'd like to receive the new one to another address. Thank you.

I would contact Apple directly and have them work with to get the iPod shipped to a new/different address.
http://www.apple.com/contact/
B-rock

I need to change the MAC Address for Airport on MacBook

I have a specific need to change my son's Airport MAC address as his school requires the use of USB network cards that aren't compatible with MACs. These cards are needed because the school's router uses MAC address filtering.
Before we upgraded his Mac to Snow Leopard, we were able to change the MAC address to the MAC address of the useless dongal the school supplied. We basically created an AppleScript program that ran the "sudo ifconfig en1 ether xx:xx:xx:xx:xx:xx" and all was good.
This command no longer works for changing the MAC address. We tried it as root user as well and by typing it into the terminal window as root. After running the command, we can run "ifconfig en1" and it does display the new mac address but when we turn the airport on and try to connect, it just hangs and won't connect.
Our other non-Snow Leopard still works fine after running the commands so I'm guessing Apple disabled this functionality. It's hardly a security issue by being able to change your mac addres.
Is there a new way to accomplish this? I've searched everywhere.
Thanks!

Would an easier solution be to provide the school's IT admin with your mac address and have it added? If they can add a block of mac addresses for the usb dongles, they can add more for machines that cannot use the dongle.
Also: "It's hardly a security issue by being able to change your mac address."
While it may not be a security issue for your machine, it is a security for the school network who is using mac address filtering as hopefully only one part of their wireless security.
That being said, have you read this?
http://osxdaily.com/2008/01/17/how-to-spoof-your-mac-address-in-mac-os-x/

How do you add a MAC address to air port

How do you add a MAC address to anAir Port

Hi CarlMcc!
I have an article here that may help you with this question:
AirPort base stations: How to view WAN and Wi-Fi MAC addresses
http://support.apple.com/kb/HT5566
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

How to get the MAC address of the additional 10G NIC with ILO command line

how to get the MAC address of the additional 10G NIC with ILO command line?
thanks.
This question was solved.
View Solution.

Hi Bruce,
Out from what I can find on this network card is it not possible to get the mac address without a OS. I would recommend you to get/burn a Linux/Ubuntu live CD/DVD and run a Ifconfig in there.
Hope it helps you.
Best regards
Zincas
I work on behalf of HP

How do I find a "download button" for the Flash Player 11.x?

How do I find a "download button" for the Flash Player 1.x updateon my Mac? All I find is a download tag for other products on the Adobe Flash Player 11.6.602.180" page.

You don't even need a button.
Either:
<a href="docs/mytext.pdf">My text</a>
Or:
<a href="docs/my text.pdf"><img src="images/pdf.gif"
width="34" height="20" border="0"></a>
where the image is the pdf symbol
GP01

How do you add a MAC address to air port so it will recognize a Nest thermostat

How do you add a MAC address to anAir Port

In a v5 utility it looks different to a v6 utility.. and you should not be using MAC restrictions anyway, unless you have time controls. MAC filtering is not adequate security.
There are only two options Timed Access or Radius.. you cannot use Radius without a Radius authentication server.
Clcik the + symbol and add the MAC address.
Make sure the time limits are not restricted if you want permanent access.
BUT this is just the wrong way to do things. Use proper security WPA or WPA2 with a password. not MAC filters which are next to useless.
If you have issues getting your NEST to connect to the Airport, set the wireless name to correct SMB standard. That means short, no spaces and pure alphanumeric. The current name is probably not compliant to SMB network standards hence the NEST cannot connect.

How do you find your account history for what you have purchased through iTunes?

How do you find your account history for what you have purchased through Itunes. I have purchased apps for my Iphone and music and want to see a listing of where my money went. I use an itunes card so I can keep an idea on how much I have spent.
Thanks.

iTunes Store & Mac App Store: Seeing your purchase history and ...

Luxadm probe / Could not find the loop address for the device at physical path

Using EMC FibreChannel Disks on a Solaris 10
# luxadm probe
No Network Array enclosures found in /dev/es
Error: Could not find the loop address for the device at physical path.
# echo $?
255
Any ideas how to fix?
Thank,
Marcel

Hi Marcel,
Which Solaris 10 release is this?
I found a very old bug that says this problem is already fixed in Solaris 10 although the bug description says
its mostly seen on Solaris 8 and 9.
https://bug.oraclecorp.com/pls/bug/webbug_print.showbug?c_rptno=15123550
The bug says that these errors are displayed when StorADE 2.1 is running its rasagent cron job, which executes a luxadm display.
This process runs in the background so the user is not aware that another luxadm display process is running.
Work-around: Do not run Storade rasagent cron job at same time as another luxadm display process.
I hope this might help to debug this problem but I puzzled why this might be happening if its already fixed.
Let me know if the workaround helps or so I can follow-up with the right support team.
Thanks, Cindy

HT2486 How do I remove the grey "contact" selection highlight? This contact always appears as the email address for the group I want to send to.

How do I remove the grey "contact" selection highlight? This contact always appears as the email address for the address book group I want to send to.

The group is "undisclosed" there are 6 contacts in the group. The contacts are listed in 2nd column entitled "name", one of these contacts remains highlighted or selected in grey. I can't remove the grey selection of the contact. When you select the "undisclosed" group as the "to" address the contact highlighted in grey appears in the email address box. The group name should appear in the email box, but it doesn't. This began to happen after I upgraded to IOS 10.6.8. However I'm not sure that has anything to do with the problem? I do not have "show all member addresses selected." Your help is appreciated.

E4200 v2 - Uses multiple MAC addresses for the same device

This unit seems pretty good at first but on looking at the Web interface I noticed that it was using multiple mac addresses for the same device and showing devices on the lan on the Wireless side and other odd things.
After a week of running it the home server network started to get erratic, it would seem to all point to dns and dhcp issues in the router.
Seems the V1 had the same issues that they did not fix on this.
The Cisco connect software shows 5 devices the Web based utility shows 3??.
Its pretty bad that they charge nearly $200 and cannot be bothered to finish the unit or address the issues that were in V1.

I am afraid I didn't get the clear picture of the issue mentioned in the post. Could you please elaborate a little bit? If you connect a device/computer wired and then later you connect it wirelessly. It is obvious that you would get to see two different MAC addresses for the same device, one for the LAN adaptor and other one for WLAN adaptor. If that is what you are referring to?
Secondly, may I know, what issues did you face with DNS and DHCP in the router? Is it not able to resolve the DNS or something else or DHCP is not sending IP address to the clients?

How do you remove old email addresses from the invitee drop down menu in Calendar

How do you remove old email addresses from the invitee drop down menu in Calendar

Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Caches/com.apple.iCal/Previous Recipients.plist
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Desktop, leaving the window open. Relaunch the application and test. If there's no change, quit again and put the item you moved back where it was, overwriting the one that may have been created in its place. Otherwise, delete the item you moved.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

How do you find the mac address for the Standby Supervisor

Similar Messages

Maybe you are looking for