How do you fix an LCD screen ripple dot in the center of the display (Macbook pro 13 inch late 2011
There is a small dot that ripples in the center of the screen. I have an Early 2011 macbook pro 13 inch and it should not have any problems with it. Does anyone have suggestions?
it should not have any problems with it.
No, it shouldn't, but technology is not perfect. Sh*t happens.
Similar Messages
-
How do you resolve the problem on a MacBook Pro of a blanks screen, no backlight, fan is running, nothing will eject, and mac won't respond to resets?
My gut response would be to Boot from that install disc and do an archive install ...
To get the DVD out power it up while holding down the trackpad button -
How do you fix a white screen on a ipod touch
how do you fix a white screen on a ipod touch
okay, so my ipod screen is white.
i tried to hold the two buttons down for like 5 minutes.
plugging it into my computer (which didn't amount to anything because the computer didn't even pick up that it was connected to my ipod)
and coming on here to find any way to fix this.
ok apple.... ok. i guess i'll just wait til the battery dies.
this is stupid. -
Hello, this might be a basic question, but how do you open QuickTime to record a new webinar? I have a new MacBook Pro with Yosemite and can only get QuickTime to appear in Finder but not actually open to allow me to record something new. Thx.
Hi Winterwilly,
Welcome to Apple Support Communities.
The article linked below answers your question of how to use QuickTime to record something on your MacBook Pro’s screen.
QuickTime Player 10.x: Record your computer’s screen
Cheers,
-Jason -
I have a macbook pro 13’ (late 2011) 2.8Ghz Intel i7 memory 4GB 1333 MHz DDR3 and have upgraded my OS X Lion to Mavericks 10.9.5. Everything has slowed down and the battery lasts a bit earlier. How do I go back to the older OS X Lion? Or should I improve speed differently? Would improving memory to 8GB help?
i have run the EntreCheck and here is the report:
EtreCheck version: 1.9.15 (52)
Report generated 28 September 2014 16:16:39 GMT+3
Hardware Information: ?
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.8 GHz Intel Core i7 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 4:59:22
Disk Information: ?
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 749.3 GB (203.96 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Vodafone (ZTE) Vodafone Mobile Broadband K3565-Z
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.ZTE.driver.ModemDriverMac (1.0.2d1) Support
[loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.1) Support
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.1) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ?
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
StartOuc: Path: /Library/StartupItems/StartOuc
Launch Daemons: ?
[running] cn.com.zte.PPPMonitor.plist Support
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] PPPMonitord.plist Support
Launch Agents: ?
[running] cn.com.zte.usbswapper.plist Support
[running] com.hp.devicemonitor.plist Support
[loaded] com.hp.messagecenter.launcher.plist Support
[running] Swapper.plist Support
User Login Items: ?
iTunesHelper
Dropbox
Internet Plug-ins: ?
SharePointBrowserPlugin: Version: 14.0.0 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Safari Extensions: ?
AdBlock-2
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
MacFUSE Support
Tuxera NTFS Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
5% Safari
3% WindowServer
2% BitTorrent
2% hidd
0% softwareupdated
Top Processes by Memory: ?
229 MB Safari
160 MB softwareupdated
156 MB com.apple.WebKit.WebContent
135 MB com.apple.IconServicesAgent
102 MB VLC
Virtual Memory Information: ?
45 MB Free RAM
1.55 GB Active RAM
1.52 GB Inactive RAM
895 MB Wired RAM
628 MB Page-ins
0 B Page-outs -
How long to boot MacBook pro 13" late 2011?
It takes 1 minute 30 seconds to startup my macbook pro 13" late 2011 (2.4ghz i5 processor, 4GB RAM)
This seems like a long time? I have Microsoft Office and Photoshop installed, will this slow it down?
Thanks!if you have a normal hard drive installed - it usually takes a minute to desktop when you power up.
check your login items to see what's loading when you first power up your Macbook.
you can also go to disk utility and verify your disk permissions - repair them if errors are found then restart your Macbook.
see if that helps your booting time.
good luck -
Macbook Pro 13" Late 2011 hard drive fails, how to replace hard drive?
Hi!
I have a Macbook Pro 13" Late 2011 (OS X Mountain Lion v 1.3.18 (352.4). I tried to install OS X Mavericks but it showed this error message:
"This disk has S.M.A.R.T. errors. This disk has a hardware problem that can't be repaired. Back up as soon much data as possible and replace the disk."
The laptop was still doing fine so I didn't do anything. Then it started to act funny: iPhoto stopped working, hangs when I watch video streaming, and it started to run really slow. I only use the laptop's basic features- internet, watching movies, editing using iMovies so it's really strange for me that the hard drive failed all of a sudden.
I called Apple support and a kind fellow tried to troubleshoot it, thinking it was only a software problem. In the end, he said I need to bring my macbook to the service center and have the hard drive replaced. I know it will cost a lot so I want to replace the it myself.
Here are my questions:
1) Can this problem really be solved by just replacing the hard drive?
2) Can I use SSD this time so my Macbook can run faster?
3) What SSD is recommended for my late 2011 Macbook 13"?
4) I don't have the installation disk, can I still install the OS X Mountain Lion? How?
I am looking for other sites as well but I hope this community could share some tips too.
Thanks a lot!I've switched out the hard drive on my Late 2011 model several times and I've never disconnected the battery cable.
In my "Opinion" it is not necessary to do that. Not sure if it is or not recommended by Apple.
EDIT:
I just looked at my User Manual, PDF I downloaded from Apple, and there is no mention of disconnecting the battery.
Here's a link to the manual for my model.
http://manuals.info.apple.com/MANUALS/1000/MA1602/en_US/macbook_pro_15inch_late_ 2011.pdf -
I draw a (fill only) shape at 50% with the pencil tool and when I go to draw another, the transparency jumps back to 100%. I would like it to stay at 50% for every mark I make, anyone know how? I wish to build up multiple semi-translucent vector shapes like in the attached image.
Many Thanks.
MarkIn the bottom of the Appearance Palette, toggle the (deep breath) New Art Maintains Appearance / New Art Has Basic Appearance button (pant pant).
I leave it to you to do three things:
1. Figure out which state of that stupidly-designed single button means which setting.
2. Figure out if the stupidly-designed tooltip that appears when you hover over that stupid button means:
A. ...that what the tooltip reads is the current setting, or...
B. ...that what the tooltip reads is the setting you will get if you click the stupidly-designed single button.
3. Remember what you figured out the next time you need to visit that stupidly-designed button.
Adobe doesn't understand this is a simple yes/no decision, and that a far more intuitive simple labeled checkbox will do.
JET -
Screen won't turn on after sleep for newest macbook pro (Feb 26 2011)
Hi!
I just bought the 13' Macbook Pro with an 2.7GHz dual-core i7 processor and 500GB of space, the $1500 model. I am having a problem with the screen and I am wondering if I should be worried about it or if anyone else has noticed it. If it continues, I will have to take it into the store and see if I can get it fixed.
My macbooks screen will not turn on after it falls asleep for a long period of time. The first night I had this computer, it was playing music and I turned the screen brightness all the way down/off and then I fell asleep. The energy settings were set so that the computer would fall asleep after 20 minutes. Pathfinder, F.lux and iTunes were the only application running at the time. When I woke up the next morning, the light on the computer's side indicating it was asleep was slowly fading in and out (as expected). I hit some keys on the keyboard and the keyboards backlighting turned on after a few seconds.
But the screen did not turn on. I tried adjusting the screen brightness on the keyboard and nothing happened. After a few minutes, I held down the power button and heard the computer turn off. I turned the computer back on, AND THE SCREEN LOOKED VERY STRANGE. I could see part of iTunes fragmented/segmented into 5 or 6 sections across the screen. There were also strange lines going across the screen. It looked kind of like a leftover image of iTunes that could be solved with a screen refresh. I turned off my computer again and turned it back on about two more times, and then the screen would simple just not turn on.
As I was packing up to go to the Apple Store, I tried one more time to turn my computer on and the screen was working fine. This was yesterday, and for the rest of the day the computer seemed to work fine. However, I don't think I let my computer fall asleep all day yesterday because I was using it so much.
Basically the same thing happened this morning when I woke up, except to a lesser degree. My computers screen was unresponsive after keyboard input, but I was able to get music to play from my speakers. I restarted it and it seems to be working fine. I didn't see the screen do that weird fragmentation thing this time.
I think something about the sleep function is interfering with my computer's screen. Or perhaps Pathfinder or F.lux have something to do with it. F.lux, by the way, is a application that turns the screen a dark yellowish at night to help your eyes. But I have friends that use this application and I myself have used it for a while and we have never had this problem. Then again, none of them have a 13 inch with an i7.
Does anyone know about this problem and have advice that would save me a trip to the Apple store?
thanks!Bad news and good news. The bad news is that it happened again this morning. The good news is that I finally found something interesting in the console log, at the exact second my clock is stuck when the machine is failing to wake from sleep:
3/10/11 7:33:53 AM kernel WaitForStamp: Overflowed waiting for stamp 0x32b5d on Blit ring: called from wait for blt buffer (2D blt)
3/10/11 7:33:53 AM kernel timestamp = 0x32b5c
3/10/11 7:33:53 AM kernel ** Debug info for apparent hang in Blit graphics engine **
3/10/11 7:33:53 AM kernel ring head = 0x000013b0, wrap count = 0x 0
3/10/11 7:33:53 AM kernel ring tail = 0x00001f58 ring control = 0x00003401 enabled, auto report disabled, not waiting, semaphore is waiting, length = 0x004 4KB pages
3/10/11 7:33:53 AM kernel timestamps = 0x32b5c
3/10/11 7:33:53 AM kernel Semaphore register values:
3/10/11 7:33:53 AM kernel VRSYNC: (0x12044) = 0x0
3/10/11 7:33:53 AM kernel BRSYNC: (0x22040) = 0x0
3/10/11 7:33:53 AM kernel RVSYNC: (0x 2040) = 0x0
3/10/11 7:33:53 AM kernel BVSYNC: (0x22044) = 0x0
3/10/11 7:33:53 AM kernel RBSYNC: (0x 2044) = 0x0
3/10/11 7:33:53 AM kernel VBSYNC: (0x12040) = 0x0
3/10/11 7:33:53 AM kernel trying to clear semaphore wait on Blit ring
3/10/11 7:33:53 AM kernel After attempt to clear semaphor wait = 0x00003001 no longer waiting
3/10/11 7:33:53 AM kernel kIPEHR: 0x1800001
3/10/11 7:33:53 AM kernel kINSTDONE: 0xffffffff
3/10/11 7:33:53 AM kernel kINSTDONE_1: 0x3fffffff
From when the problem apparently starts (some point in the night while my machine is idle and supposedly asleep) until when I discover it and reboot the machine, I get dozens or hundreds of the above messages. Now somebody just needs to figure out what that means and stop it from happening... -
Macbook pro 13 Late 2011 Hissing Headphones FIX
Hi I've recently come across this 'hissing' low noise in my headphones, which start the moment I plug my headphones in. I went through multiple threads on this and people just don't have any fix for it. I have a fix for it; that worked for me and may work for you depending on the circumstances.
Firstly, I have a Macbook Pro 13.3 late 2011 model. Never had this issue. I'm on the newest Yosemite. Nothing has changed with my macbook, expect one thing; my hardware setup. My charger cable had broke, so I had to get a new one. I bought it from a site called 'miniinthebox'. This was the change. Something so simple; a cheap quality charger, which when plugged in, made this noise that was unbearable. I'm assuming the cheap wires and materials used in this charger caused static with the power and outputted this sound.
TL;DR
If you just recently bought a new charger, or a new cable or any sort for your macbook, try and unplug it and see if the sound changes. My 3rd party charger is the cause of the hissing.
Hope this provides some fix for anyone in the same situation. Good luckWhen did you buy it?
Do you run it down to near zero % before recharging? Which is a bad thing to do.
Do you charge it to 100% before you take it off the charger?
Do you always disconnect the charger once it reaches 100% even if you are right next to an AC outlet. Which is a bad idea.
Batteries only last so long. Over use it and it will go bad sooner. -
How do you fix a frozen screen on the ipad2 ?
i have tried the normal way....holding down the home & sleep/wake button but when the apple icon comes back on screen
the loading cog comes on but then freezes again
HELP!!Have you done it properly? [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!
-
How do you fix a touch screen that is FROZE?
my home and power buttons work but my touch screen doesnt. how can i fiix it ????
I did all three but the screen still doesnt work. The lock sceen is showing but the it wont let me unlock it.
Any other suggestions?? -
How to you fix start up screen ?
It starts up and stays on the white apple, while a update bar shows up and turns off ..
Mac OS X 10.6 Help: If your computer stops or delays while starting up
Mac OS X 10.7 Help: If your computer stops or delays while starting up
Stefan -
What to you do it your ipod is disconnected from the USB cord without being ejected first?
3) If this is a counterfeit, is there someone in Apple that I should contact to help them track this kind of problem?
Apple Legal contacts
"*Counterfeit Prevention (Hardware)*
To report suspected counterfeit or imitation Apple products, contact [email protected]" -
System Specs:
Processor 2.2 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6750M 512 MB
Software OS X 10.8.4 (12E55)System Specs:
Processor 2.2 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6750M 512 MB
Software OS X 10.8.4 (12E55)
Maybe you are looking for
-
My new backbeat GO 2 headset is not recognized by bluetooth service of my new ipad mini with ios 7.0.4! It doesńt appear in the list of bluetooth devices. It was working on previous versions! What happens? Could someone help me? Thanks!
-
Issue with Popup LOV field not clearing out "default" value
I am using APEX 4.0 & Oracle 10g I have a form that displays a default value on a "Popup LOV" field (say P1_POPUP) when the Form is initially displayed to the user. The default value is part of the Popup LOV list of values. If the field is "manually
-
How to sync photos from MacBook Pro to iPad 3?
How to sync photos from MacBook Pro to iPad 3 without it automatically deleting previously synced photos, or replacing them with new ones?
-
Storing pdf documents into oracle apps form
Hi Experts, My requirement is in AP invoices form, I want to insert scanned documents (which is in .pdf format) . i have nearly 4000 documents. is there any API to inset multiple documents . How oracle handles to store these documenst ..there is no c
-
Toshiba L55-A5226 Touchpad Randomly Stopped Working
I used a external mouse before this happened so I noticed it probably a week after it occurred. I tried going into the synaptics driver but it no longer showed up in the mouse menu. I have uninstalled and reinstalled the latest touchpad drivers (more