How do you fix error code 54 in iTunes for windows 8?

Was trying to sync my music to my iPhone 5s and kept getting this error code 54. I wasn't understanding why it kept doing that and it was very irritating. Tried to sync my gf iphone 5 as well but kept getting the same thing. I did some research and people said it was locked files on my computer but I'm having a hard time finding these locked files and need help solving this problem. Please help me. I am running itunes on windows 8.

Read lots of replies to this. I've just tried simply clicked "Turn Off Genius" under the Store menu and it seems to have worked for me. I already had ITunes Match turned off - not sure if that makes a difference.
Not sure if this will work for everyone, but it's worth a go!

Similar Messages

  • How to fix error 3914 of itunes for windows...?

    How to fix error 3914 of itunes for windows...?

    Queries1 :- Where i need to type the above command to get the version of cygwin and make.From the command prompt -- Make sure that the Cygwin Bin directory is set in the Path (Refer to the same doc, 7. Add Cygwin Bin Directory to Path). You could also search for make.exe file to verify the directory where all those executable files are located.
    Thanks,
    Hussein

  • How do you fix Error Code:7 (After Effects CS5)

    After a few minutes of working with any simple effects or presets in Adobe After Effects CS5 I will get this error below every time:
    "Your hardware configuration does not meet minimum specifications needed to run the application. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code: 7"
    Once this pops up I have to close the program without saving. Why am i receiving this error and how can I fix it? By looking at the specs below of my laptop I can't understand how I could get an error saying that my configuration does not meet minimun specifications.
    Here are my computer specs:
    Lenovo IdeaPad Y570
    Intel i7-2670QM 2.20GHz
    8 GB RAM
    Windows 7
    NVIDIA GeForce GT 555M with CUDA & dedicated 1GB RAM
    NVIDIA driver version 8.17.12.6844

    Turn off your onboard intel graphics chip in the BIOS or configure your Optimus driver accordingly. Seems like AE is switching the graphics driver in the middle of things or the wrong one is used to begin with (that is the weaker intel chip). also simply updating all drivers may make the problem disappear.
    Mylenium

  • How do you fix error code "907 Invalid COD"

    Attempts to download on my BB Torch 9850 fails and returns error message "907 Invalind COD".  What is the fix?

    Hello barkbeetle,
    I wanted to follow up with you on the 907 Invalid COD error code that you are receiving on your blackberry Torch 9850. Since the error message that you are getting is not common to the average user, I decided to investigate this issue a little further. After some research on blackberry's website, I found an article about this error message that you have. Even though RIM stated that there is not a permanent solution to this issue, this article has several workarounds to try. Below is the link of possible solution to your specific issue. As you provide additional information on your issue then we can continue to find a permanent resolution for you.
    http://bit.ly/WGvVJ
    Once you have tried the workarounds in the link below, please share your findings with the community as it may help another fellow blackberry user in the future.
    Thank you...
    ArnettH_VZW
    Follow us on Twitter @vzwsupport

  • How do I fix ERROR code 2324 Itunes wont run.

    I "updated" my Itunes and now it won't open. It states Error Code 2324. I went to delete my Itunes so as to reinstall it. It won't allow me to delete the program either telling me the same error code. HELP ?

    See if this helps:
    https://discussions.apple.com/thread/4555650?start=0&tstart=0

  • How do you fix error code 1008 in itunes

    everytime i try and subscibe to itunes match or home sharing or even try to download something it shows the "1008" or 1004" error message. please help.

    iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - includes list of iTunes error codes

  • How do you fix error code 2330?

    I updated to version 8 and now when i try to open my itunes it tells me error 2330 occured and it couldnt open or something like that

    OK, go to this article and start at the section titled
    *General installation troubleshooting*
    and go through the steps in order. You have to click on each section for it to expland. If one step gives errors, just go onto the next step.
    Also I'd turn off any AV software (like Norton, MsAfee, NOD32, Kapersky) before starting this.
    And for the love of god, back up your itunes ITL file....put a copy on your desktop or a USB drive.
    http://support.apple.com/kb/HT1926

  • How do you fix error message "data rate for this file is too high for DVD.  You must replace this file with one of a lower data rate".

    When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD.  You must replace this file with one of a lower data rate".  We need help to correct this so we can complete burning to DVD. 

    What did you export from Premiere?
    Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

  • TS3694 how do i fix error code 1015

    how do i fix error code 1015 my iphone 3g will not start up it come up with connect to itunes sign and when i try to restore it it comes up with error code 1015

    Presumably you read the article from which you posted. The regular guess is that your phone is jailbroken. If so it is not supported here.

  • How i can fix error 9806 in itunes ?

    how i can fix error 9806 in iTunes ?

    You can't.  Error 1015 occurs when trying to restore a jailbroken phone.
    Jailbreaking your phone voids any warranty remaining with Apple and forfeits your right to any assistance from Apple including from this forum.
    You're on your own.  From what other people have posted, it's extremely unlikely you'll ever get your phone working again.

  • How do you fix error -3256 when trying to put ios 5 on my phone?

    How do you fix error -3256 when trying to put ios 5 on my phone? I have a mac. I have backed up everything....?

    I always get the same error 3256 (as Timothy98) when trying to download ios 5 on my upgraded iTunes in my macbook pro. Please help. I want to start using ios 5.

  • How do i fix error code 6A00 on the LCD screen of my Canon PIXMA MP810

    how do i fix error code 6A00 on the LCD screen of my Canon PIXMA MP810 

    Hello drews,
    To try and resolve the 6A00 error, we will want to ensure that no paper jams or obstructions exist in the printer.  To do this, please follow the steps below:
    ASF / Paper Output Slot
    Turn off the printer.
    Remove paper from the ASF.
    Gently pull the jammed paper out.
    If paper is visible from the ASF, use both hands to pull the paper out slowly.
    If paper is visible from the paper output slot, use both hands to pull the paper out slowly.
    If the paper tears and a piece of that remains inside the printer, open the scanning unit (printer cover) and remove the paper from inside the printer.
    Note : Be careful not to touch the components inside the printer.
    Turn on the printer and confirm that the Alarm light is off.
    (If the jammed paper remains in the printer, the paper may be automatically ejected.)
    Load paper back into the ASF.
    Press <OK> to clear the message and continue printing. If you are printing from an application software, follow the instructions displayed on your computer.
    Top
    Paper jams inside the printer
    Turn off the printer and disconnect the power cord and USB cable.
    Remove the jammed paper slowly using the following procedure.
    Open the rear cover to check if the paper is jammed.
    Pull out the cassette and check if the paper is jammed inside the cassette area.
    Stand the printer with the rear side down, holding the document cover.
    Press the tabs together and pull the green cover toward you.
    Check if the paper is jammed.
    (If you were not doing Duplex printing, you do not have to follow this procedure.)
    Close the green cover and place the printer back to a normal position.
    Reconnect the power cord and power on the printer. Confirm the Alarm light is off.
    Load paper back into the ASF or cassette.
    Press <OK> to clear the message and continue printing. If you are printing from an application software, follow the instructions displayed on your computer.
    Top
    Clearing credit card-sized paper jammed inside the printer
    Credit card-sized and 4" x 6" sized paper must be loaded properly. If this media is not loaded properly, it will feed into the printer and will not exit. Credit card-sized paper should only be loaded in the ASF and in portrait orientation. 4" x 6" sized paper can be loaded in the ASF or cassette. But must be loaded portrait orientation.
    If credit card-sized paper was loaded in landscape orientation in the ASF and did not eject (exit), please follow this procedure.
    Turn off the printer.
    Load the same paper type that is jammed inside the printer in portrait orientation.
    Power on the printer.
    The paper stock in the ASF will automatically feed the jammed paper from the printer.
    To resume printing, load the paper in portrait orientation.
    If 4" x 6" sized paper was loaded in landscape orientation in the cassette and did not eject (exit), please follow this procedure.
    Turn off the printer.
    Open the rear cover.
    Fold in four a piece of letter-sized plain paper.
    Push in the folded paper until it hits the jammed paper.
    If the jammed paper is visible from inside the printer area, pull it out and proceed to step 7.
    If the jammed paper cannot be pulled out, push in the folder paper from the rear so the jammed paper is in between the feed rollers.
    Pull out the folded paper and close the rear cover.
    Power on the printer and confirm that the Alarm light is off.  The jammed paper should automatically eject.
    To resume printing, load the paper in portrait orientation.
    If you still experience the same error after performing the steps above, please turn off the printer, unplug the power cord from the back and leave it out for at least 10 minutes, then plug it back in and turn it back on.  If the error persists, unfortunately, the printer will require servicing to resolve the issue.  Please click on the Contact Us link below to obtain your servicing options.
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • TS3694 how do i fix error code 3194

    how do i fix error code 3194

    Presumably you read the article from which you posted. The regular guess is that your phone is jailbroken. If so it is not supported here.

  • How can I fix error code 403?

    How can I fix error code 403?

    Hi Roiby,
    We need more information regarding the error you mentioned here?
    Please have a sahre with what actions, what changes on the PC recently, check into event viewer and see if related logs we could found out.
    Further, if this is related with Windows update, you may take a look at hte folloowing article:
    "Error 403 Access Denied/Forbidden" occurs when you connect to Windows Update
    Best regards
    Michael Shao
    TechNet Community Support

  • How do I fix error code 1406 when downloading Adobe Reader

    How do I fix error code 1406 when trying to download Adobe Reader, using Windows 7 Pro, 64 Bit.

    Hi ldpowell44
    Plesse refer the below Document : http://helpx.adobe.com/acrobat/kb/error-1402-error-1406-acrobat.html

Maybe you are looking for

  • How do I reinstall the osx on a second hand macbook pro?

    My partner recently purchased the latest release of the Macbook Pro and gave me his old one. The problem is that it is still tied to his info and passwords and I would like to somehow completely wipe the system and reinstall it afresh. I have his pas

  • Running Solaris 8 and Solaris 10 on a SPARC box at the same time

    I know that this is not possible, but still... need to clear it out from the experts... Have a upgrade request of Solaris 8 to Solaris 10. However, Solaris 8 environment should not be disturbed. How can this be done without going for another SPARC bo

  • Migration of Transaction Data from SRM 4.0 to SRM 7.0

    Hi We are upgrading from SRM 4.0 to SRM7.0. In our old release, many Shopping Cart woul be in the status of Approved, Awaiting Approval and Held. When the same data is migrated to the SRM 7.0 Productive system, how should we take care of the same. We

  • ITunes "security code is invalid"

    I have used a credit card once for buying my apps, but for the past few weeks it hasn't let me use a different visa gift card, it says that my security code is invalid, what do I do???

  • Canon Digital Rebel XTi RAW support?

    I just purchased a Canon Digital Rebel XTi and cannot get RAW files to import into iPhoto. I even tried the Image Capture trick (downloading to disk and then importing) to no avail. The file format is listed as CR2, which is supposed to be supported.