How do you fix playback quality for still image video on Adobe Premiere Elements 10?

Hi there, I'm a new editor, and am still wanting to make my first awesome video. I find that when I do a still motion video all quality is very bad, and a little blurry. I asked that question and someone told me to fix the playback quality and I do not know how to fix that. If you can answer my question, please also give me the instructions too.

First, read these...
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935

Similar Messages

  • I disabled my iphone 5. how do you fix it. i for got my passsword.

    i disabled my iphone 5. how do you fix it. i for got my passsword.

    If you have got the error on your iPhone saying 'iPhone is disabled', put your device in DFU Mode and re-boot, or if it is still not working, then restore in iTunes.
    Good Luck

  • How do you fix a 0x000007b for In Design?

    How do you fix a 0x000007b for In Design?

    From reading some forum posts, it may have to do with the Microsoft C libraries...at least if you are running Windows. The following thread has to do with Illustrator, but it may be also pertinent to ID:
    Re: Unable to start Illustrator CS6 64-bit on Windows 7

  • Can you do Green Screen/Blue Screen/Chroma Key on Adobe Premiere Elements 12 for mac?

    Can you do Green Screen/Blue Screen/Chroma Key on Adobe Premiere Elements 12 for mac?  If not, what are the alternatives?

    JimbobT
    ChromaKey, GreenScreen Key, and BlueScreen Key are not included in Premiere Elements Mac.
    Some suggest Videomerge as the alternative. I do not. But Videomerge is not THE alternative.
    Instead, I prefer the Difference Matte as a substitute for the 3 absent keying effects. Please check out my blog post on that which includes
    the how to.
    http://atr935.blogspot.com/2013/05/pe11-difference-matte-as-substitute-for.html
    The suggestion has met with good results according to the feedback that I have gotten to this.
    I am strictly a Premiere Elements Windows user who does not prefer Videomerge even in Windows.
    Please review, consider, and let us know the outcome.
    Thanks.
    ATR

  • How do you fix error message "There is a problem with Adobe Acrobat/Reader. (6:6)

    How does one fix error message "There is a problem with Adobe Acrobat/Reader.
    If it is running, please exit and try again. (6:6)

    http://www.essexinfo.net/queens-road-residents-association/assets/documents/village-voices is one example but a whole lot of the material which has been uploaded as pdf files over the last four years is now unviewable - if you click on the link you just get a black page.  The main site url is http://www.essexinfo.net and our site is the Queens Road Residents Association.  I have just gone through every link on the site and a number of links when clicked on will not bring up the material.  I tried going into Adobe 10 on my computer and disenabling protected mode as was suggested on your forum and at first when I went back into the essex info site it seemed to have worked when I clicked on a link that had only produced a black page.  However when I went back to test all the other links I found that the problem was still re-occuring.  This is really weird as the site and my connections to it which I sometimes make by directly accessing the site and sometime via a link from our QRRA blog have always worked perfectly with no problems up to now.  I downloaded adobe 10.1 on 8 March 2011.
    I contacted essexinfo separately but they said everything seemed to be OK at their end working from within the system.
    If you can help I would appreciate it.
    Pat

  • Projects settings for AVCHD MTS files in Adobe Premiere Elements 8

    Hello,
    I have read several discussions already, about importing AVCHD MTS file in Adobe Elements (version 8), but I'm also confused a littlebit, so I would like to confirm if I'm correct.
    FYI, I have a Canon Legria HFR26 camera and am using Adobe Premiere Elements 8 (with the latest updates installed).
    According to the specs in the Canon instruction manual:
    Videos are recorded in high definition using AVCHD specifications
    (MPEG-4/H.264 compression).
    Audio compression: Dolby Digital 2ch
    The camera supports making video's in different format, but I have done it in the default SP format, which results in a resolution of 1440x1080 (50 fields per second, interlaced).
    I have copied the video from the camera to my harddisk, and Windows also mentions the video's as AVCHD of 1440x1080 (Bitrate 7672kbps).
    The frame rate is 25 frames/second. I assume this is correct for 50i?
    So, when I import my video's into Adobe Elements 8, I select the following projects settings:
    PAL, AVCHD, HD 1080i 25
    Because the description matches my video files:
    - For editing with 1440x1080i AVCHD camcorders.
    - 16:9 interlaced HD video at 25 frames per second.
    - 48kHz audio.
    The video's are imported correctly and I can play them. However, as soon as I drop a video on the timeline, Adobe immediately starts background rendering the video (a red line appears on the timeline).
    What I understand from some discussions, is that this shouldn't happen, because the video format doesn't match the project settings. On the other hand, I have also read that for Adobe Elements 8 this is normal behaviour and it always start background rendering AVCHD video's.
    Is this expected behaviour or should I chance my projects settings or maybe even convert my video files to a different format?
    Thanks,
    Michiel

    The ability to work natively with AVCHD files was not added until version 10, Michiel. So you'll still have to render while you work in version 8.

  • Poor rendering quality for still images

    I have opened a new project with PAL DSLR settings (1080p, 25fps).
    I have added a full res (about 4000px x 3000px) still image to the timeline and added a pan effect to it. When I view the preview in PE it looks fine. However, when I render the clip the quality is very poor in the preview.
    I have tried exporting the clip to a file and this plays fine, but the preview does not look good.
    Any ideas why the rendering should have this effect?

    pickera2
    I have a few things for you to consider and tryout if interested.
    First, you are taking a 4000 x 3000 4:3 still into a 1920 x 1080 16:9 project (you say project preset = PAL/DSLR/1080p/DSLR 1080p25).
    Your problem is confined to the preview of the pan and zoom result using the Pan and Zoom Tool (I am assuming the you are using Premiere Elements 10 or 11 or 12...I do not recall that you said which one).
    Edit Menu/Preferences/General includes the preference "Default Scale to Frame Size" and it does just that. It is typically found ON. So, when your 4000 x 3000 pixels still is imported, the program tries to fit it as best possible into the 1920 x 1080 16:9 space set up in the Edit Mode monitor (Magnification = Fit) by the project preset. In your case, you would expect to see the following with black borders:
    Is that what you are taking into the Pan and Zoom workspace? Or are you scaling what is seen there so that the image just fills the 1920 x 1080 space? Does it look like the following after scaling, if you do scale to fit?
    And important point to remember is that whatever the case, the Pan and Zoom workspace is not referencing what is seen on the Timeline, but is instead referencing back to the original at the hard drive save location.
    An alternative to all of this includes
    Bringing you image into the project with the Default Scale to Frame Size disabled in preference. Then the 4000 x 3000 will overflow the space in the 1920 x 1080 monitor. You would then ignore what you see in the Premiere Elements workspace, select the Pan and Zoom Tool to open the Pan and Zoom workspace, and do your pans and zooms on the image that you see there. Click Done when finished. Back in the Premiere Elements workspace render the Timeline and  scale what you see in the Edit Mode monitor as needed.
    You also might want to look at beforehand cropping your 4000 x 3000 4:3 to 2200 x 1238 pixels 16:9 and using that as your source media with or without the Default Scale to Frame Size enabled.
    Please view to see if the previews look any better and/or there are improvements in the export.
    Thanks.
    ATR

  • Can you merge two still images into one in premiere elements?

    I am working on a slide show for a memorial service and would like to have one still image showing and then have the next one come in without replacing the former- somehow merge the two. Is that possible?

    Depending on what you mean by "merge," you can use PiP (Picture in Picture) to have the second image come in and occupy part of the screen with the original image. There are many ways to display PiP, from say a small image located in the screen to having it occupy one half of the screen.
    Does that sound like what you are hoping to do?
    Besides the rather simple PiP, one can also use Track Matte Keying to bring up the second image and to soften edges, drop it into an image of, say a TV set, or a window.
    The possibilities are endless, or nearly so.
    Let us know if PiP works for you, or if you need a more intricate merging of the images.
    Good luck,
    Hunt

  • How to remove red eye from you video with adobe premiere elements?

    I would be greatful if someone could let me know how to remove red eye from a video, which I will be using for my acting reel. Thank you!

    Ang.Fel
    What version of Premiere Elements do you have and on what computer operating system is it running?
    Do you have an integrated set of Photoshop Elements and Premiere Elements (such as 10/10, 11/11)?
    How long is this person with the red eye viewed?
    There are two possibilities that I can think of, but I would have to work it through with the actual footage and adapt accordingly.
    1. Keying and color correction.
    2. In Premiere Elements, do a freeze frame (in Freeze Frame dialog, Edit in Photoshop Elements after Insertion + Insert in Movie Option + adjustment of duration of the Freeze Frame bmp).
    In Photoshop Elements, Red Eye Tool if possible or other color correction tool there.
    How did you ever get red eye in video?
    ATR

  • Displaying File Name for Photo and Video Clips in Premiere Elements 10

    I am using Premier Elements 10 on a Windows 7 Pro desktop computer to create
    a project consisting of 128 jpg photo and mp4 video clips.  Before creating
    the project I created a short file name for each clip describing its
    content.  I've added menu tags at locations which separate the project into
    discrete segments.  I've selected a disc menu which utilizes the menu tags I
    created.  I previewed the project and I'm satisfied that the DVD disc I
    intend to create will display everything I want except for one thing.  I
    have spent several hours trying to find out how to have each displayed clip
    include the file name (without extension) somewhere near the edge of each
    window as it is opened in the finished production.  I sure would appreciate
    some help with the steps needed to accomplish this.

    Welcome to the forum.
    This can most easily be accomplished by adding a Title (maybe from a Lower-Thirds Title Template), above each Clip/Still Image.
    I would create one such Title, and manually add the "File Name" in the location desired. Then, place that on a higher Video Track, above the Clip/Still. Then, just use the Duplicate Title function, to create a new Title, with the Text and Style, per the first - edit the Text for each, as required.
    I know of no automated method to grab the Clip's/Still's File Name, and add that to a Title, as PrE does not support any scripting.
    Good luck,
    Hunt

  • How do I import Pinnacle Studio 15 videos into Adobe Premiere Elements 12?

    I no longer have Pinnacle Studio after replacing crashed computer. I installed Premier Elements 12, but cannot figure out how to import all of my old videos.
    Jim Engles

    ATR,
    Thanks for your interest and time. Sorry I did not explain myself initially.
    The files I was trying to import were saved as Pinnacle Studio “project” files. So they must be .stx, as you say. In Windows Explorer I cannot determine the file extension; all I can see is the project folder name and subfolder names.
    Now that I think about it, when I was last working in Pinnacle at least two years ago, I had the option on how to save my files and I saved them as “project.” In fact all of the backed up videos are under an overarching folder named my video projects.
    I did find two backed up files with an .avi extension, which did import.
    So the best solution would be to find a computer to borrow that has Pinnacle installed and open and save the files to export as .avi.  If that doesn’t work, I will try to find a trial version of Pinnacle to use.
    Years ago a coworker told me to buy Adobe Premiere instead of Pinnacle. I wish I had listened.
    Thanks,
    Jim Engles

  • How do you change print quality for eprinting?

    HP Photosmart 5515
    OS installed XP
    The driver does not give this option. I like to do Fast Draft sometimes.

    Hello mshantea,
    If you are sending print jobs to the printer's ePrint email, there is no way to adjust the quality.  Sorry.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How do you fix error msg for Windows IE v8 SP3 invalid drive: J\ when installing Reader?

    I have tried to install the latest version (and two older ones shown on Adobes install free Reader webpage) onto Windows IE 8 sp3 get error message Invalid drive: J\, or Folder path "My Pictures" there is invalid character. I have been unable to correct these to allow  Reader to install without errors. Get to 96 % installation then these messages appear but not at the same time.  Any suggestions?

    See http://support.microsoft.com/kb/894510

  • S10 - How do you turn on webcam for pictures and video?

    I hit the fn  and camera button, I see a camera icon on bottom right but nothing happens? 
    Also in the fast bootup section before Windows the mouse is very fast, any way to slow that down, I think its the linux boot up. 
    Thanks for the help 

    Hi, that Fn+ESC is only a powerswitch for webcam function....
    no special program is delivered by lenovo... but  
    U can use this EasyCapture Program http://consumersupport.lenovo.com/en/DriversDownlo​ads/drivers_show_931.html
    or webcam works in start-->preferences-->systempreferences-->scanner & cams ...
    or in most messenger programs u can choose the cam ...
    question number 2 ... in quickstart ... (that is a little linux , hidden folders on windows partition) not all touchpad functions are implemented...since the first version....download and install the latest version here.. http://consumersupport.lenovo.com/en/DriversDownlo​ads/drivers_show_1265.html
    sincerely KalvinKlein
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • How to remove a timestamp with adobe premiere elements 8

    How do I remove a time and date stamp on a video with adobe premiere elements 8.

    If the camera burns in the date/time stamp, then there is not much that can be done.
    If you need to eliminate that, then the best would be to apply the Effect>Motion>Scale, to enlarge the footage, until the date/time stamp is effectively cropped off by the Frame Size. You might want to look into Effect>Motion>Position, to "move" the date/time stamp closer to an edge.
    The other method is tedious, and requires ideally Adobe AfterEffects. There, you could use the Clone Tool, to "paint out" the date/time stamp, if there is enough clean background to do so.
    A variation on that method would be to Export/Share as a Filmstrip and Import that into Photoshop (if one had Photoshop Extended, there are other formats, that would work too), and then Frame by Frame, use the Clone Tool to remove that image.
    Though not a way to remove it, you can also replace it with a Title, that occupies the area of the date/time stamp, and just cover it up.
    If the camera allows you to turn that "feature" OFF, you would want to do so for newer footage.
    Good luck, and sorry for the bad news.
    Hunt

Maybe you are looking for