How do you get multiple live instruments to put out sound?

I just got a M-Audio 61 keyboard from my wife for our anniversary. I love it and it works great with GarageBand 1.X. I also have a guitar I use with GB. It is plugged in the 1/8 in. mini jack input in the back of the Mac. I however can't get both to put out sound at the same time. Lets say, for instance, that I would play the guitar and my wife the keys. How can I get both to put out sound at the same time?
Thank for any help you can offer.
Your friend in Mac OS X,
Jose

Danke Christoph!
I was glad to get your response. I thought I was not doing something right in GarageBand. I'll get GB2 and try out multiple live sources.
Once again thanks.
Your friend in Mac OS X,
Jose Mauricio Cuervo

Similar Messages

How do you get multiple screens on the iPad with iOS 5.1.1?

How do you get multiple screens on the iPad with iOS 5.1.1? We just upgraded to iOS 5.1.1, and we see no way to be able to open multiple screens at once. Before, there was a small button in the upper portion of any window. That button would take you from a particular window to the place where multiple windows are open at once. Does it do it differently? Is there a special setting button that we have missed? Thanks!
One more thing: We are only talking about Safari.

Guitaristica-
I don't think I've seen a way to have separate Safari screens visible at the same time. The small thumbnails were deleted in one of the iOS updates, and replaced with a multiple "Tab" system.
You can open an additional screen in a new "tab" by pressing and holding on a link until a new menu comes up.
Fred

How do you get up live chat. Need to contact BT r...

OK so I got my latest bill and BT wanted to up my direct debit charges to £56.00 per month! I'm only on Option 1 broadband and obviously a call package that is WAY too expensive. There is no way I can afford that so - somehow - through this complicated and baffling BT website, I managed to have a live chat with someone.
I paid off the excessive monies owed and I was assured my direct debit would stay at £36.50. However, thinking about it I decided to see if I could change the amount online.
Low and behold when I went into the change direct debit section, it advised at DD per month of £46.50 - a whole £10 LOWER than what BT had said on my bill.
So, I changed it to that and I also changed the date coming out from the 2nd to the 6th of every month.
Now, the amount hasn't changed on my bank account, they are still saying they are going to take out over £50.00 per month from April and I want to be assured that this is all incorrect and that perhaps it's taking longer than normal to get things changed.
Can I find the live web chat again to log onto it? No.
Do I want to phone and go all round the houses pressing '1' or '2'? No.
Do I want to email? No. Purely because I ask for an email back (proof!) and all I get are phone calls.
I just want to know if things are as I want them!! Is this too much to ask BT? Can you not simplify your website so that it is easier to get in touch via web chat instead of clicking on a link - only to be sent to another link?
I have to say, once my contact is up I'm outta here!! You are so expensive and you can never be got hold of!.

Hi Debski
Debski wrote:
obviously a call package that is WAY too expensive.
BT do offer an unlimited anytime phone package. For £4.99 extra per month, you get free calls 24/7 to 01,02,03,0870 and 0845 numbers. For any other number you can log on to SayNoTo0870, then type in the number, for example 0871 and in a majority of cases, you'll find a 01 alternative. This should bring the phone bill down by quite a bit. (Line rental + £4.99 - should be all you need to pay, unless you call mobiles from your landline. If you do, IIRC BT also offer a package for this to also bring the tariff down)
I managed to have a live chat with someone.
From the Bills & Call Packages main page, you'll find the live chat there.
But here's the link anyway - http://bt.custhelp.com/app/contact/c/2902/?s_intcid=con_intban_sanda_contact_us_chat_from_forums
Debski wrote:
Oh and could you tell me why I've get charged three months Broadband and line rental in advance?
Sounds like you're now on quarterly billing instead of monthly
-+-No longer a forum member-+-

How do you get multiple plots to show up on the same graph?

I am trying to get multiple (20) plots to show up on the same XY
graph. My data set is a 2D array, which exits a for loop.
The ultimate goal is to have one plot show up after each iteration of
the for loop. I can only get all 20 to show up at once, not one
at a time. Any suggestions?
Thanks!

Here is a sample in 7.0 format.
Attachments:
20 plots on XY graph.vi ‏31 KB

How do you get a MultiTimbrel Instrument Set Up In Logic?

Hi...
First of all I'd like to say (since this a basic question...) I did read up on it first. However, I'm still not convinced it functioning as it should.
What I have is MOTU's MachFive2 opened as a multi-timbral instrument in Logic Pro. However, it still doesn't seem to function the proper way... If I load samples into the various MIDI Channel slots and have the Channels for each track set to the corresponding MIDI Channel number... Something Just isn't quite right. Not sure why but I don't think I'm setting up the instrument properly in logic. I already tried talking to MOTU's forum but they were pretty sure it was more related to logic.
In Motu's MachFive2 Sampler I have the ability to setup 16 channels in several different banks giving me the ability to run one Plug-In which supports layering, multi channels and various other MIDI related capabilities.
Can someone quickly run me through the steps to make sure I am setting up the MachFive2 plug-in sampler correctly?
It would be greatly appreciated!
Thanks!!

Hi
Step 1
Create a New Software Instrument channel using the New Tracks button. Select the Multi-Timbral check box and choose how many MIDI channels/Parts you wish.
Step 2
Load up your Instrument in the I/O slot and load in all the necessary sounds. Check that all are assigned internally to the correct MIDI channels (and possibly audio outputs)
Step 3
Select the appropriate track in Logic.
You should be good to go?
CCT

How do you get a LIVE person at this company???????????????????

I have been trying for over 3 hours to talk to a LIVE person and the "few" times they have asked on all their stupid options if I wanted to speak with a customer service rep to dial "0", I have then been cut off. What do you have to do with this company to speak with someone? I have tried every phone number I could find and hit every option they offer. PLEASE HELP!

cananyonehearme wrote:
I have been trying for over 3 hours to talk to a LIVE person and the "few" times they have asked on all their stupid options if I wanted to speak with a customer service rep to dial "0", I have then been cut off. What do you have to do with this company to speak with someone? I have tried every phone number I could find and hit every option they offer. PLEASE HELP!
Thank you all for your responses. It's greatly appreciated.
@cananyonehearme,
I definitely understand your frustration and apologize you are having difficulty getting a hold of a live Customer Service representative. I am here to help with any concerns you have. Please, if you still need to speak with a live representative feel free to send us a private message with your name and mobile number so we can contact you. Also, please provide the best time to reach you.
To answer your original question, in the future if you wanted to speak with Customer Service over the phone you can call 800-922-0204 or dial *611 send from your cell phone. You can follow the prompts so you are routed to the appreciate department or you can just hit "0" until you are directed to a representative.
Hope this information has been helpful and I apologize for any inconvenience.

How do you get a Bucket Truck to come out?

So, here is my problem... I ordered TV and Internet last week and the Rep I worked with told me that my house was "hot" and would be able to do a self-install. I recieved everything in the mail, connected my cable modem and was surprised when another local cable provider appeared in my browser instructing me to activate with them. So, it does appear that I am not connected to the right service provider at the utility pole, and for the life of me, can not get customer service to recgonize that I only need that fixed, not an installer to come charge me $40. If anyone has the magic phrase that works with customer service that would be awesome! Thanks!

JayInAlg wrote:
You most likely have two drops coming into the house, normally the drop is not shared between the Comcast's and the overbuilders system. It might be as simple as checking around the outside of the house where the ground blocks are, and connect your inside coax cabling to the proper Comcast ground block and remove it from the overbuilder's ground block. The ground blocks are the demarc's between your inside coax wiring and changing between one or the other would be something that would need to be done.It is one line dropped to the house, it appears there are 3 service providers on the utility pole and I am assuming that needs to be switched. Luckily I do have someone coming out, but I am trying to avoid paying the money if possible.

How can you get your apple security questions with out a call, How can you get your apple security questions with out a call

please help

1. See my User Tip for some help: Some Solutions for Resetting
    Forgotten Security Questions: Apple Support Communities.
2. Here are two different but direct methods:
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contacting Apple for
        support and service.
3. For other queries about Apple ID see Frequently asked questions about Apple ID.
4. Rescue email address and how to reset Apple ID security questions
5. For online assistance use Apple - Support - Express Lane

How can you get OS Lion back if you already downloaded Mavericks? I CANNOT live with the battery life of 2 hours!! HELP

How can you get OS Lion back if you already downloaded Mavericks? I CANNOT live with the battery life of 2 hours!! HELP

Kappy wrote:
Don't downgrade OS X without first erasing the drive. You cannot restore a Time Machine backup of Lion directly on top of a later version of OS X such as Mountain Lion or Mavericks.
When you "Restore from a Time Machine Backup.", the drive will be erased for you, but yes, won't hurt to:
Boot into Recovery (hold ⌘R on boot)
Utility->Disk Utility->Erase Macintosh HD, then Repair Macintosh HD
Quit Disk Utility
Then Select: Restore from a Time Machine Backup.

How do you get rid of white space when you are printing multiple pages to one sheet of paper?

How do you get rid of extra white space when you are printing multiple pages to one sheet of paper? When printing multiple pages to one sheet of paper Acrobat won't let you select the "zoom" for printing.
Thanks

Take a look at Quite Imposing.

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

How do you get to the "Multiple Item Information" window so I can click "Part of a compilation:?

How do you get to the "Multiple Item Information" window so I can click "Part of a compilation"? When I transfer a CD to iTunes, and the CD has ten tracks, it loads as ten different albums. Also, once this happens, do I have to delete the album and start over or is there a way to merge the albums in iTunes? Using iTunes 10.04.08.

And you've made me remember that using the compilation flag may only work in iTunes if you go into the Songs view, then use View > Column Browser > Show Column Browser and then View > Column Browser > Group Compilations to make sure this line is ticked.
It is also best if View > Column Browser > Use Album Artists is also ticked.
tt2

How do you get Adobe Acrobat X Pro to open multiple pdf's in one window

How do you get Adobe Acrobat X Pro to open multiple pdf's in one window
I just got upgraded to Windows 7 64-bit and had to update to Acrobat X Pro.
I was using Acrobat 8 Pro on my XP machine and this was nice since i usally have muliple files open at the same time

Hi Richard,
Due to technical limitations, MDI was dropped with the Acrobat 9 release:
http://blogs.adobe.com/acrobat/mdi_vs_sdi_in_acrobat/
-David

How do you get instruments into garageband i.e. violin, sax etc.

how do you get instruments into garageband i.e. violin, sax etc.

You can install additional sound fonts, see GarageBand '11: Play Soundfonts in GarageBand
or install Jam Packs: If you buy (for a moderate fee) Mainstage 2 at the AppStore, this will install all five JamPacks, so that the loops and instruments can be used with GarageBand. This way you will get all Symphonie orchestra instruments, World Music, Rhythm Section and many more.

On garage band how do you get on to the instruments

on garage band how do you get on to the instruments?

It's probably more effective to post in the Garage Band forums here:
GarageBand

How do you get multiple live instruments to put out sound?

Similar Messages

Maybe you are looking for