How do you get Oracle 8i to work with j2sdkee 1.3 B

I had the j2sdkee1.2.1 working with Oracle 8i and I had the following line in the ~conifg/default.properties files
Here's what worked:
jdbcDatasources=jdbc/EstoreDB|jdbc:oracle:thin:@localhost:1521:ORCL|jdbc/InventoryDB|jdbc:oracle:thin:@localhost:1521:ORCL|jdbc/jcampDB|jdbc:oracle:thin:@localhost:1521:ORCL
In the j2sdkee1.3 beta 2, the resource configuration file format seem to have changed and I am not sure how to get oracle to work. I have tried modifying the new format but it does not seem to work. Can anyone tell me where set drivers for Oracle 8i or any place I can look to figure how to.
jdbcDataSource.5.name=jdbc/Oracle
jdbcDataSource.5.url=jdbc:oracle:thin:rmi:??;create=true
jdbcDriver.0.name=COM.cloudscape.core.RmiJdbcDriver
jdbcXADataSource.0.name=jdbc/XACloudscape
jdbcXADataSource.0.classname=COM.cloudscape.core.RemoteXaDataSource
jdbcXADataSource.0.dbpassword=
jdbcXADataSource.0.dbuser=
jdbcXADataSource.0.prop.createDatabase=create
jdbcXADataSource.0.prop.databaseName=CloudscapeDB
==============
Any pointers on how to get Oracle 8i to work with j2sdkee1.3 b2 will be appreciated. thanks.
--pvt

You are right. It seems the format has changed.
However, now there is and admin tool that comes with J2EE SDK 1.3 Now you don't have to touch the config file by hand.
You can use this tool to get the configuration done.
To add JDBC driver the command is...
j2eeadmin -addJdbcDriver oracle.jdbc.driver.OracleDriver
and to add a data source the command is...
j2eeadmin -addJdbcDatasource jdbc/Oracle jdbc:oracle:thin@rtc:1521:acct
Read details about this and other configuration you can do using this toll in the file %J2EE_HOME%/doc/release/ConfigGuide.html

Similar Messages

How do you get face time to work with shared email adress

I have 2 computers sharing the same email address. I recieved for xmas a new i touch with face time. I can connect with the thrid computer not using the same email address as mine. How do I get the other 2 to accept the incoming calls?

You have to add a unique calling email addres to Settings>Facetime and delete the common email address. Yu need to do the same thing for Messages.

How do you get core audio to work with maverick. I'm using logic pro X

i'm having problem with core audio and maverick

It sounds as if you have altered the Tempo after recording the Audio ( but before selecting +Follow Tempo+ ).
This would make your Regions adapt from the old tempo to the new one, therefore changing their timing.
Here's a bit more info:
Audio files recorded in Logic Pro can follow the project tempo—inclusive of tempo changes—set in the global tracks.
+Note: These audio files can also follow the first key signature set in the global tracks.+
As an example: If you record a bass solo at 100 bpm, you can change the project tempo to 120 bpm and the bass solo will automatically be played back at the new tempo.
The function works with all audio files that were recorded in, or bounced/exported from, Logic Pro.
The function only works in the parent project (the project the audio files were created in). If you drag a file recorded in a given project to another project with the Finder, the file can not follow the project tempo.
Bounced or exported files can only follow the project tempo if the “Add resulting files to Audio Bin” option was enabled in the Export or Bounce window—prior to the bounce or export.
Files copied between two projects retain the ability to follow the project tempo.
The project’s tempo information is used to tag the beats in the recording. The function works best if your audio files match the project tempo as precisely as possible. The longer your audio files are, the more RAM is required for this functionality to work properly.

How Do you get Time Machine to work with a network drive?

I have not been able to choose a Drive for Time Machine on a Network Drive. The network drive is active and shown on my desktop. How Do I use it?

Correct. Back up to a network volume (other than Time Capsule) is not supported, so if you want to do it you have to use the command line to set something as shown in the article.
Another option you could do would be to create a large disk image file on the NAS device and mount it on your client and back up to that. You'd use Disk Utility to create a large (say, 200 GB) sparse image on the network storage and then double click it to mount it on your machine and set TM to back up to that. I could show you how to do this in 30 seconds but instructing it over a forum post... not so easy

How do you get the holiday calendar working with sl

Can't get to show up - neither could genius bar

I know having all your calendars on the same track is important, SDSue2. Google offers lots of applications to allow syncronization between your desktop applications, like Outlook, to your phone. Try checking out www.google.com/sync for options to sync your phone's Google Calendar with your computer's Outlook calendar.
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

How do you get the compass to work with the maps app?

When I am in my maps app it does not face me in the direction I am going? Its just the little blue indicator showing where I am? please advise!

http://www.apple.com/iphone/how-to/#compass.compass-and-maps

For OS X 10.3.9 Panther how do you get Flash 9 to work after downloading it?...

For OS X 10.3.9 Panther how do you get Flash 9 to work after downloading Flash 9 ?... for the link at
http://www.universalhub.com/node/24494
"To watch this video you need Flash 9
You have an old version of Flash. Fortunately we can upgrade
your computer to Flash 9 without without any hassle. Just click on the
upgrade button - you don't even need to leave the page!
[ Upgrade now! ]
After Flash 9 is downloaded, you'll need to restart your browser.
[ Download and install manually. ]"

Hello Again Don,
It appears you have been struggling with this issue since November of 2008.
Have you considered upgrading to a newer version of OS X instead?
11/20/08 What workarounds are there for OS X 10.3.9 users on websites with flash
4/12/09 How do you get the current Flash to work with OS X 10.3.9 ?...
5/25/09 After downloading Flash 9, how do you get it to work with OS X 10.3.9 ?...
8/9/09 How can OS X 10.3.9 users view Flash on websites?...
8/9/09 How do you get Flash 9 to work with OS X 10.3.9 ?...
ali b

How do you get the radio to work ?? - says no radio signal but headphones are plugged in ??

How do you get the radio to work? Is another app or download required? Its a new Ipod nano - 8G, box doesn't say anything about "generation" ?? Appreciate any help
cr8tivsolutions

ok, I see now the plug has to be pushed in really tight until the white is flush with the nano

How do you get gif's to work on a mac

how do you get gif's to work on a mac

Here yah go.
Install the software at the link below
This will allow you to view animated gifs in preview
click on the gif to select it and then press the spacebar
http://sourceforge.net/projects/animgifqlgen/

HT3310 how do i get my headphone to work with the iphone?

how do i get my headphone to work with the iphone? Are there some settings
that I need to turn on so I can use my headphone while talking on the phone?

Are you using the earbuds that came with the iPhone? If you are using other earphones, it's possible that they need an adaptor to work with the iPhone's recessed headphone jack.

How do I get my AppleID to work with iCloud?

How do I get my AppleID to work with iCloud? It says that I have a valid ID, but that I can't use it with iCloud...
How do I fix this?
Thanks!!

Firstly, you need to change your details with Apple, Start here, change your country if necessary and go to manage your account.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

How do i get my sim to work with this phone?

I just bought a used iphone, when i put my sim card in, it says it is lock. I have done this before and been able to use instantly, but this time it wont come on. HOw do i get my sim to work with this phone?

If your iPhone was unlocked and has relocked after an update to iOS, then the iPhone was hacked to unlock it and has now been locked back to the original carrier. You'll need to contact the carrier to whom the iPhone is locked and request unlocking. They may refuse to do so since you're not the person with whom they had the contract.
Regards.

How can I get my ipod to work with itunes?

When I connect my ipod classic into my new computer it seems that itunes does not recognize it. How can I get my ipod to work with itunes? I'm afraid to disconnect my ipod because the display is saying Do Not Disconnect.

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

How do I get wrt54g-tm to work with Mac OS X with a cable...

How do I get wrt54g-tm to work with Mac OS X with a cable modem. Was told by tech support, they could not help me over the phone and to go on line for instructions. Still not working....

Do you have internet when wired to the router?
What exactly is the problem? What error messages do you get?
What are the current settings on the WRT?

How can I get elements 11 to work with 16 bits photos?

In the expert mode of Photoshop Elements 11, I can only work with 8 bits photos. How can I get Elements 11 to work with 16 bits photos?

No, you can still buy photoshop cs6 (perpetual license) if one doesn't want to subscribe to the cloud version (photoshop cc version 14)
Either way is expensive compared to photoshop elements.
http://www.adobe.com/products/cs6.html?promoid=JOLIS

How do you get Oracle 8i to work with j2sdkee 1.3 B

Similar Messages

Maybe you are looking for