How do you get the Event folder date to match the media dates in FCPX

Modifying the clip date/time with the Modify command works fine ... but the Event itself still has the date the event was created, not the date of the media that it contains.
If tried using Touch on the Event folder but FCPX ignores it.
Any ideas on how to get the Event folder date to match the media dates (or set to any other date desired) so that Events sorted by date show the actual dates of the media that they contain?
Thanks
Jonathan

Here is the texture I've been manipulating  all afternoon to try and achieve the looks i want.
and when I put this texture over the top of other images and select Multiply, and adjusted the opacity, this is what i get....
Now this kinda works?? but it still looks not as good on an asian person.
Thanks by the way to everyone for all the tips, I really really appriciate it   and more suggestions for improvments are welcome!

Similar Messages

  • How do you get mail notifications to show up on the lockscreen

    How do you get mail notifications to show up on the lockscreen ?

    Go into settings
    Notification center
    Turn mail on and then set how and for which accounts you want it displayed.

  • How do you get wireless on your windows side of the computer

    Hey,
    I have a macbook and i use a air port express for my wireless internet on my mac side of my computer how do you get your wireless internet set up on the windows side of your computer. i can't figure out how put it on there at all so im guessing that there some thing wrong with boot camp. I'm 13 so make it simple

    Louser500:
    Welcome to Apple Forums.
    Did you install the boot camp drivers as soon as you installed Windows on your boot camp partition? If not then:
    1) Boot up in Windows
    2) Insert your Leopard Installation CD in the disk drive
    3) Windows should automatically begin installing the Boot Camp Windows drivers which includes the wireless connection.
    4) Once the process is completed then you should have access to the wireless connection (Ensure that you choose the right network to connect, the security type and password which will the same as your Mac OSx side).
    Axel F.

  • HT201272 How do you get your files that are hidden in the cloud?

    How do you get your files that are hidden in the cloud?

    What files are you looking for?
    GB

  • How can I get my downloads folder to appear in the docking station

    How can I get the download folder to remain on the docking station

    Note if you don't have any folders on your Dock, note the trashcan is on one side of the dock with a divider between it and applications.  Minimized windows (with the yellow button on the upper left corner) will go between the trash and that divider.  You can drag folders into the section between the minimized windows and the trash.

  • How do you get Firebox to save a bookmark to the last bookmark folder you used?

    In previous versions of Firefox, when I went to save a bookmark, it use to pull up the previous bookmark file that I used. This is very handy if you're bookmarking several websites into the same category instead of having to search for the same file in Bookmarks. How do we get Bookmarks to remember the last file used to add the bookmark to?

    Eren,
    Yes.  When you finish editing the fields on the Info tab, click "OK" and the artist, name, year, etc will be written to the file itself. 
    So will the artwork if you have pasted it into the Artwork tab (but not if you have gotten it via the Get Album Artwork command).
    To make sure the info really did get written, play the same file in another player.
    Also, if you have anything on your computer that will undo the changes, make sure to disable it.  In particular, go into Windows Media Player on the Tools > Options > Library tab, and uncheck anything that is capable of editing your tags (Rename...,  Retrieve..., etc).  Otherwise, WMP may undo the edits you make in iTunes.

  • How do you get your Document folder next to your Applications on the dock?

    I was deleting a file from my screen, and I accidentally removed my Document Folder so it is off my dock. Now next to the dashed lines to make the dock bigger, I only have my Application folder with the trashcan. I have no idea how my Document folder back on! Please help!

    Go into finder, under "Places" click your user account, then click on "Documents" and drag it down next to Applications. The Applications folder and Trash Can should move over to make room for your Documents folder

  • How do you get it to show a picture of the albumn your on

    As you can see on the main advertisement for the 20gb color ipod, there is a picture of the albumn of the song your listening to, how do you assign pictures to certain bands or albumns?

    iPhoto??
    Jack,
    Here are a couple of methods.Go to <a href="http://images.google.com/Ó>Google Image Search</a> and type in (say) "The Beatles", and click on search images. That brings up 327,000 images!! You could be more specific and just type in "Abbey Road", if that was what you were looking for. Double click on a picture you like, then at the top of that page click on "see full size image". When you get that image, simply copy/paste it into the space for album artwork in iTunes. Make sure you select the album in the browser of iTunes before you copy/paste. You'd be surprised what Google Images can bring up. There are literally millions, and even obscure album artwork can be found.
    In the unlikely event that Google canÕt find an image, you can also get artwork from Amazon.
    If youÕre happy using images from Amazon, and donÕt want to copy/paste, then http://www.yvg.com/itunesartimporter.shtml&#211;>Art Importer is a nice free program to do it for you.

  • [O365] [EWSMA 2.0] [C#] [Windows] How do you create a contact folder that resides under the "My Contacts" node in OWA for O365

    In OWA for Office 365 you can create a contact folder that resides under the "My Contacts" node on "Peoples" tab. This folder ends up appearing under the "Contacts" folder in the exchange store. However, if you attempt to create
    a contact folder under "My Contacts" using Outlook it ends up under "Other Contacts" node in OWA for O365. Even if you attempt to position folder at the root of exchange store it still places it under the "Other Contacts" folder.
    The same is also true if you attempt to create a folder using EWS. Is there a way to create a folder using EWS that will appear under the "My Contacts" node in OWA for O365? I've tried the following with no luck:
    ContactsFolder myContactsFolder = new ContactsFolder(EwsService);
    myContactsFolder.DisplayName = "My contacts folder";
    // Set other properties
    myContactsFolder.Save(WellKnownFolderName.Contacts);
    and
    ContactsFolder myContactsFolder = newContactsFolder(EwsService);
    myContactsFolder.DisplayName = "My contacts folder";
    // Set other properties
    myContactsFolder.Save(WellKnownFolderName.MsgFolderRoot);

    Hi Tony,
    Lots of questions, here goes:
    CAN YOU: Yes.  You can create multiple server nodes.  You can add a server node by going into the Visual Administrator and clicking the add node button.  Make sure you have the required space on the physical drive to accomodate the space needed for the new node (hint: check the space of your existing node).
    PERFORMANCE: Yes, maybe.  If you are running on a 32bit OS, yes, this will definitely improve your performance as you are most likely memory constrained at the moment.  If you are running on an x64 or 64bit OS, you will find that performance will improve but only to the extent that you have memory free and that you have available CPU for the new node.  Remember Java processes are CPU hogs at times, especially during startup, and the more of them you have, the more CPU you need.  Also, watch out for garbage collections.  Be sure to tune your instance to with incrementals and fulls in mind.  Another benefit of multiple nodes is the HA you get by default when you add more than 1 node.  Now if 1 node should crash or restart, your portal is still running and accessible on the other node.
    PARAMETERS: Yes and no.  For java startup parameters, you can create a template under the global --> servers to have your parameters be all the same  When you create a node, those parameters will be used.   But, your currently configured child configuration parameters will not be reflected in the new instance since those parameters are taken from the global (parent).  This is what the global is for and you should consider adjusting the global if you want your child nodes to have consistant values.
    Let me know if you have more questions.
    -jwise

  • How can you get your phone turned back on if the main line phone is being worked on?

    My brother shattered his phone &amp; his phone is the main line so my service is off. Is there anyway to get it turned back on?

    Hello soccergril2013,
    If you unable to get your iPhone to show up on your computer, then pick on of the articles below that goes with the type of computer that you are using. Each article will have you look at using different cables and checking drivers. 
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    iOS: Device not recognized in iTunes for OS X
    http://support.apple.com/kb/TS1591
    Regards,
    -Norm G. 

  • My Boyfriend has lost all of his contacts on his phone after down loading the new iphone soft wear why would this happen and how can he get them back                          how can you get back your contacts after down loading the new iphone soft wear

    My boyfriend has lost all of his contacts on his phone after downloading the new iphone softwear. why would this happen and how can he get it all back

    You don't have to post the same question at one minute intervals.  Somebody will answer it, but perhaps not in 60 seconds.

  • How do you get a merged CHM to open in the same window as the master? (RH8)

    We have a problem where everytime you click on a topic from a merged CHM in the master TOC, it opens a new window exlusive to the chm where the topic resides.  We have more than one master chm and this is the only one that does it, it is also the only one that was created from RH8, although the others have been updated with RH8. We've compared the Window and SS Layout properties with a parent chm that doesn't behave this way and haven't been able to find any differences.  Is there something we can do to have all the topics whether merged or from the parent, open in the same window?

    I think somehow the last time I had this problem I stumbled on a solution and wasn't sure what fixed it, but the problem reared its head again, and it was back to the drawing board. Now I think we have a solution, but we don't know for sure what created the problem. Although we're pretty sure the problem has something to do with creating a new window when there is already and existing window.
    What we found. This problem couldn't be fixed in the SSLayout. We found that the Properties | Advanced | Window setting for individual topics in the TOC had been erased. This Window drop-down selection lets you choose a window other than <Default> if more than one window exists. If not changed by the user, it should stay at <Default>, but somehow the setting was blank on several topics, probably due to the creation of a new window, and maybe some other values being changed. This is probably a bug in RH8, but I don't know about other versions.
    How to fix it.
    First you have to isolate which merged .chm file (child) has the problem, I believe I did this by removing one child .chm at a time from the Parent project and then seeing if the parent .chm worked correctly after generation.
    Once you've found the offending .chm (there may be more than one), open the project and the TOC for the .chm that is a problem.
    Go to the TOC pod > Topic Page Properties (right-click on a Topic in the TOC and select Properties) > Advanced > Options panel and ensure that a value exists in the Window: field. If the field is empty, you have a problem.  Click the drop-down and select <Default>, even if your .chm window displays in drop-down.
    I don't believe there's an option to set a window as the default when you create it, so if there's more than one window, who knows what the <Default> option is drawing from, unless <Default> points to the window you have selected in the SSLayout, which I think is the case.
    Find all Topics that have this problem and fix them.  Note: you cannot fix this by going to topic Properties in the Topic List (or from r-click Properties in a topic), you have to do it in the TOC.
    Save all changes, generate the child .chm, and then replace the old child .chm with the new one.
    Open the parent .chm and check to see if all topics open in the parent window. Your Done

  • How do you get idvd to stop pausing and resetting the playback once burned onto a dvd?

    I created an idvd using photographs from iphoto and music from itunes and when it plays from idvd I do not notice any pausing.  When I went to burn the project onto a dvd the process took 2 hrs and then I could burn the dvds.
    When I went to watch the dvd, the pictures and music would pause at 5 mins and 54 secs resetting the time back to 0:00.  This continued everytime it reache 5:54 in the slideshow.
    Is there some way to stop this so the slideshow/pictures/music plays smoothly without the skipping?
    Kristin

    Are any of the iTunes audio track protected tracks?  That can cause problems with encoding as iDVD won't use them. 
    Are you saving the project as a disk image before burning?  Doing so separates the encoding process from the burning process so you can test the disk image by mounting it and playing  with DVD Player to make sure the encoding was successful. If it's good then burn the disk image to disk with Disk Utility.   If not then you've saved a disk.
    OT

  • How do I get SQL results to text, columns matching up, with data.

    Hi All,
    I have written a java application, that connect to a database, make a query, and return a resultset, that is then put into a LinkedList.
    The main aim of the application is that it should take snapshots of the database at certain intervals, and store a textfile per tableName, with this data. Therefore, I want to create a range of .txt files, or even a html file. The application does not make use of any GUI functionality, so I am not using JFrames etc.
    The main problem I have is how to get the column names and data mapped correctly, underneath it. Any ideas are welcome. Thank you.

    I hope you're not asking how you get the column names and data into the file in the same order. That is, obviously, by reading and writing them in the same order, of course. The columnnames from the ResultSetMetaData, and the columns from the ResultSet, of course.
    I assume you're talking about how you get them to line up in pretty columns? Look at formatf in String or printf in PrintWriter. (And, probably, DatabaseMetaData to get the "sizes" of the varying columns.)

  • How do I get a track from iTunes to match the master tempo of my project?

    I have a project open and I am adding a track from iTunes, but it does not line up with the tempo, making it impossible to play loops over it.  Is there a way to make the tempo of the track match the master tempo of the project?

    benfrommason wrote:
    so is there a way to mix songs together that aren't the same tempo?
    Yes. You have to decide which song is the "master" song that you match the other to. This song has to have the "follow tempo and pitch" option unchecked, the other song has it checked. Then you can use the tempo slider to match the songs to each other.
    (I even did it with "Sympathy for the Devil" which has an irregular beat - it gets faster as the song progresses, the folks didn't record with a metronome back then. Using a tempo curve, I was able to match it to a modern, steady-beat song.)

  • How do you get permission for FlexLm/HASP to access the system clock?

    I've got animation software that accesses the system clock to verify a security dongle. It works fine under 10.4.3, but I recently got a dual processor G5 with 10.4.5 on it. According to the s/w tech people, the dongle mgmt s/w doesn't have permission to access the system clock because of new security fixes. Anybody have any idea how I can open permissions to the system clock so I can get back to work?
    Thanks for any help you can offer...
    Brian

    Moving this discussion to the Using Flash Builder forum. 
    I believe the software though is working as designed.  From previous discussions I have seen the Design view was removed in Flash Builder 4.7.  The users in this forum may be able to provide additional information around this.

Maybe you are looking for