How do you get the magic effect on Photo Booth? And other new features?

I have searched everywhere for the download and I tried software update. My friend recently bought a Mac and she has all these cool effects (like the one with hearts around your head, birds around your head, makes you have big eyes) She claims the effects came with the Mac but I don't have them? is there anyway I can download them? Is this I knew feature I need to upgrade to? HELP PLEASE!

Click here-->http://bit.ly/HlsCgP<--
Message was edited by: EZ Jim
Mac OSX 10.7.3

Similar Messages

  • How do you get the extra effects on photo booth?

    I want all the extra effects that you can download but I dont know where to find them! Help

    Click here-->http://bit.ly/HlsCgP<--
    Message was edited by: EZ Jim
    Mac OSX 10.7.3

  • How do I get the audio to work for YouTube and other videos?

    How do I get audio to work for YouTube in Facebook and other videos as we'll?

    Hello, Olubabi
    Thank you for the question.  I'm assuming you are not receiving any sound from applications when playing video/audio content.  If this is the case, the first thing I would check is if the side switch is set to silent as this can cause applications to be mute.  Below I have included an article that covers adjusting the  settings for the side switch.  Also, make sure to close all applications in Multitasking and power cycle the device.  Test the sound issue after processing these steps.
    iPad: Understanding the side switch
    http://support.apple.com/kb/ht4085
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Regards,
    Jason H.

  • How do I adjust the glow effects in Photo Booth?

    I'm just now buying a macbook pro 15 inch retina display and I was trying to use the Glow effect in Photobooth but it was just to "Glowy". So, is there anyway I can just adjust that one effect?

    Why not post in the SB forum?
    Go to File/Record and set the format to what you need:

  • When using the measure tool the imputed scale resets to 1to1 as soon as you perform another action. How do you get the scale to lock?

    When using the measure tool the imputed scale resets to 1to1 as soon as you perform another action. How do you get the scale to lock?

    Hi there - I think I am having problems associated withg Cause 9 in that in google mail I have another pop email address associated so that I can send using this email address, but then I have both addresses setup seperately in BIS. When I receive a mail from GMAIL I receive a duplicate with "received by: unknown" in the header. I had gmail setup so that it would send using by pop email address as default.
    In your answer the settings for the two filters you recommend creating are broken links and I canot actually see them. What are they?
    Also What do you recommend setup wise with gmail and a pop account. Some people say it is better to get gmail to receive the pop mail account and run the whole account from there. Blackberry doesn't seem to like this setup very much. Should I completely dissociate the pop account and to try and clarify the distinction between the two? Or should I setup a second gmail account and have that poll my pop account and then have the blackberry feed off these two gmail accounts? The reason I am considering this option is gmail provides a lot of storage and online continuity and this would effectively persist my account.
    Your help would be much appreciated.. I have had blackberry woes now for over a month and I have spent hours with various support personel, tried deleteing and sending down new service books etc etc but had no luck yet.
    thanks,
    Nathan 

  • How do you get the web application path from the servlet?

    I have created a web application which is installed in
    /webapps/myApplication
    /webapps/myApplication/data/users.xml
    /webapps/myApplication/WEB-INF/classes/myServlet
    How can you get the path to the "users.xml" file from the "myServlet" file?
    The code below doen's seem to return the xml file. anybody knows why?
    public class myServlet extends HttpServlet {
    public void doGet( HttpServletRequest req, HttpServletResponse res ) throws ServletException, IOException
    File myXmlFile = new File("/data/users.xml");

    Try this..
    String FileName = getServletContext().getRealPath("\\data\\users.xml");
    File myXmlFile = new File(FileName);
    hope this helps..

  • HT4101 Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud.

    Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud. I am able to see any photo I took on the iPad using the iPad camera (in iTunes, photo stream, or when I open windows explorer and browse the iPad director), however I cannot see any photos transfered from my camera to the iPad. The camera connection kit must have put my photos in a directory I cannot get to and cannot sync.

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • How can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

    We need the Request Restart ability when scheduling a single reoccurring job in Redwood. Most of our jobs are scheduled in CHAINs which offers the Final Status Handler on Step level, and the schedule is "paused" when a job in the CHAIN has failed ( the next instance does not populate until the OP MSG has been Replied to) , and once the OPERATOR message is replied to, the CHAIN can resume running again ( desired ) . But we need this same ability when scheduling a single job not in a CHAIN. In our testing, we set up a job with Request Restart chosen on the Error , Killed and Unknown selections on the Restart Behavior Tab. But we found when a job is scheduled say once a day at 8AM, and when it fails, an OPERATOR msg appears allowing a Restart choice ( desired), but the next day's schedule also populates ( undesired) and we do NOT want the schedule to continue on yet because we need a chance to fix the error before the next insance runs for business reasons. So how can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?

    Hello Fran,
    You can wrap the job chain in a master job chain in the first step and set the final status handler there.
    You can also set the Restart Behavior to 'Stop Submit Frame', in that case you will have to resubmit the job once you are finished troubleshooting.
    Regards Gerben

  • If your phone is broken how do you get the apple id off that phone?

    if your iphone is broken how do you get the apple id off of it?

    You can either,
    A: Go to iForgot.apple.com and reset the passcode using the password system there, or by going to appleid.apple.com
    or 
    B: IF possible restore the device to factory settings via iTunes.
    What's the xtent of the damage and the reason you need to do it?
    IF it's for iMessage as "Chief501" you will have to go with Option A or just wait till it falls off itself.

  • How do you get the answers to your security questions in order to buy an app on iphone?

    How do you get the answers to your security questions in order to purchase an app on iphone?

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (99852)

  • If you deleted a  device off of find my iphone.how do you get the device to start back up agian and put it back on find my iphone?

    if you deleted a  device off of find my iphone.how do you get the device to start back up agian and put it back on find my iphone? becuase i have delted my dads iphone acedentily of find my iphone and it is nownot working. his phone is just staying at a black screen with a loading circle on it. i need to know how to fix this..like do i go the to apple store or the carrier store or can i fix it at home?

    Try these two ways to fix the iPhone (in order).  If neither works, you would have to take it to the store.
    1.  Reset the iPhone.  Hold the on/off and home buttons togehter for about 10 seconds.  If it works, you'll get the Apple logo and then something good should happen.
    2.  Try recovery mode as described here:
    http://support.apple.com/kb/HT1808
    If one of these work, you can then re-introduce the iPhone to Find My iPhone by doing Settings > iCloud > Find My iPhone = "On" on the device.

  • How do you get the sound to play on the tv from your macbook

    I connected my macbook to my tv using a HDMI cord. I'm trying to watch netflix but the sound plays from my macbook. How do you get the music to play from the tv instead.

    The adapter to HDMI doesn't carry sound from a MacBook earlier than the Mid 2010 models and most TVs don't have separate RCA input plugs for audio with the HDMI inputs since they expect the sound to be carried by the HDMI plug. With HDMI you'll need to use external speakers or headphone jack to RCA sound plugs connected to a stereo sound system if your TV doesn't have separate RCA input plugs for audio with the HDMI plug.

  • How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room

    How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room?

    Welcome to the Apple Community.
    Unfortunately the Apple TV doesn't have a web browser so you can't do that.

  • How can you get the filter off if you can't remember the password? It's"pro con" and it wont even let me check out the rates for aflight.

    How can you get the filter off if you can't remember the password? It's"pro con" and it wont even let me check out the rates for aflight.

    You can check the file prefs.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and remove the line(s) related to that extension (procon.password).

  • How do you get the app store back on your iPad

    How do you get the app store back on your iPad

    My money is on one of the two suggestions that my colleague has given you, but if all else fails......
    You can also reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad.
    Settings>General>Reset>Reset Home Screen Layout.

Maybe you are looking for

  • Access points

    Hello At my workplace we have this printer, HP LaserJet Pro 200 color MFP M276n. And it has been connected to the wireless network since we bought it, until today. The direct feedback from the printer is that the "WEP password was not recogniced". Th

  • How to Stop the method Action When an Exception Occur in other Method

    Hi All , public void action( Event clientEvent) { startAction(); JOptionPane.showMessageDialog(null, getDocumnetId()); how to Stop the method action ( "action" ) if an exception occur in the method ("startAction") ( if the exception occur we doesn't

  • How to use selectOneList in a updateable data table column

    Hi, Could someone tell me how to use selectOneList (source from a vo X) in an updateable data table column (from another vo Y)? I successfully created a page with the data table. However, strange things happened: 1) the values populated on the select

  • Proxy receiver channel with HTTP destination or URL address?

    Hi Experts,      I have a scenario as below:      (Webservice Client)SOAP --> PI --> PROXY(SAP ECC).      A webservice client calls PI using SOAP. PI then sends the request to SAP ECC using PROXY.     I am using AAE. Therefore I have ICO.     In the

  • WLC 5508 and Cisco Aironet 1242 LWAPP AIR-LAP1242AG-A-K9

    i have deployed wlc 5508 ( image 7.0.98.0 ) with 1262N AP and all 45 AP's are working fine, at the same site i had AP1242 which i have converted to LWAPP (8 of them), these accesspoint are registerd perfectly with 5508 but non of the radio's are up.