How do you guys reduce noise in Canon 5d mark II video?

I am really interested to know if anybody could give me leads on how to reduce noise in 5d mark II videos. First off - Canon 5d mark II stock HD bitrate is not really nice. Even shooting in day time I have color noise and a lot of noise in shadow areas. Its only after I played with ML 2.3 and tried to shoot 1080p vid on CBR 1.4x mode (thats the maximum bitrate supported by my present CF card but planning to buy a new one).
How do you guys deal with it?

Tests have been done that show ISO settings in multiples of 160 produce the least amount of noise on video. Starting at 160 the 5Dmkii produces less noise than even at lower ISO settings of even 100 ISO. 160, 320, 480(500), 640 and so on. If you need ISO settings of a lot higher and the noise becomes obvious there is video noise reduction software that could help.

Similar Messages

Hi there how are you guys out there of this forum? I got a question for y'a

Hi there how are you guys out there of this forum? I got a question for y’all
I wanted to know how I could record different folders using iTunes
Cause when recorded 2000 thongs on the DVD
There were 2000 songs to go through
So I really wanted to have had folders and then the music recorded inside them
So I could get right to where I wanted real quickly
Could anyone please teach me how to do that real quickly?
Can we do it with iTunes?
I know we can do it with Nero.

1) Go to file, select new playlist. Creat the playlaist.
2) Download your music into iTunes.
NOTE: CHECK 'Recently Added' before you download your music.
If the select boxes has a check in them, turn it off by
holding down the 'ctrl' key and selecting one of the
checked boxes. This shold turn off all the checks.
It would be better to clear 'Resently Add' of all
previous downloads, but I don't know how to do that
yet.
3) under 'PLAYLIST' on the right, select 'Recently Add'.
all of your song should show there with a check in the selection
box.
4)Hold the shift key and select the frist (selete records name),
then the last recorded tune. All of the recordings shouls light
up blue.
5) While holding the 'shift' key, drag one of the records to your new
playlist. All of the blue highlighted song will transfer to the new
playlist.

Hey how are you guys listen i have an iphone 4s the one i use with the H20 CARRIEr and i trying to enable the option call forwarding and when i type tho number i go back and i notice to the call forwarding it turning off as soon i back to the main menu ?

hey how are you guys listen i have an iphone 4s the one i use with the H20 CARRIEr and i trying to enable the option call forwarding and when i type tho number i go back and i notice to the call forwarding it turning off as soon i back to the main menu ?

There are a lot of posts in the forums today with people having problems with iMessage. There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
I would just wait it out - I'm sure it will be sorted out soon.

How do you guys work around this trivial situation?

Hi,
I'm using GlassFish v2 and JSF 1.2.
Since JSP can be run using the direct url of the JSP page and the JSF pages require some prefix like "/faces/" how do you guys deal with situations
when somebody accesses the direct link of the JSF (that means without typing "faces/") ? - I noticed that GlassFish throws an error in this case which must be addressed I think.
Any hint or constructive comment would be highly appreciated. Or is this an open problem when using JSF?

Well thank you a lot, I did more googling before finding your second reply and found some info about filters, I will check your links as well and
see if I can polish my solution based on your links.
For those who might look for solving the same issue:
I added to web.xml this (my faces are prefixed with "/fx" rather than "/faces", a matter of taste):
<filter>
          <filter-name>JsfFilter</filter-name>
          <filter-class>xlinuks.JsfFilter</filter-class>
          <init-param>
               <param-name>search_token</param-name>
               <param-value>.jsp</param-value>
          </init-param>
          <init-param>
               <param-name>add_token</param-name>
               <param-value>/fx</param-value>
          </init-param>
     </filter>
     <filter-mapping>
          <filter-name>JsfFilter</filter-name>
          <url-pattern>*.jsp</url-pattern>
     </filter-mapping>And the filter itself is this:
package xlinuks;
import java.io.IOException;
import javax.servlet.*;
import javax.servlet.http.*;
public class JsfFilter implements Filter {
     private FilterConfig filterConfig;
     private String sSearchToken, sAddToken;
     public void doFilter( ServletRequest request, ServletResponse response, FilterChain chain ) throws ServletException, IOException {
          HttpServletRequest httpReq = (HttpServletRequest) request;
          String sUri = httpReq.getRequestURI();
          if( (sAddToken == null) || (sSearchToken == null) ) {
               chain.doFilter( request, response );
               return;
          int iIndex = sUri.indexOf( sSearchToken );
          if( (iIndex > -1) && (sUri.indexOf( sAddToken ) < 0) ) {
               sUri = sAddToken + sUri.substring( sUri.lastIndexOf( "/" ) );
               filterConfig.getServletContext().getRequestDispatcher(sUri).forward(request, response);
               return;
          } else {
               chain.doFilter(request, response);
     public void init(FilterConfig filterConfig) throws ServletException {
          this.filterConfig = filterConfig;
          sSearchToken = filterConfig.getInitParameter( "search_token" );
          sAddToken = filterConfig.getInitParameter( "add_token" );
     public void destroy() {
          filterConfig = null;
}

How do you stop the noise?

Just got my first blackberry! When i use the rollerball it makes a noise. How do you mute the noise? Any help appreciated!
Solved!
Go to Solution.

OPTIONS--SCREEN/KEYBOARD--(Scroll down to Trackball Section and change Audible Roll to MUTE). press the escape button (button to right of trackball) and choose SAVE

How are you guys powering your laptops in your cars ???

Hi guys,
Although I have been using computers since the first pc appeared, I only recently decided to get a laptop. I got a Lenovo B560 and have been absolutely delighted with it.
However, I am perplexed at the fact that there does not seem to be any easy options for using the laptop in the car on long trips etc ? I do not see any type of 12 volt adapter listed in the accessories ?? A google search shows a few "generic" brand power converters but I have always been leary of using anything but oem type equipment.
Anyway, how are you guys powering your machines while mobile ??
Thanks,
Bill

http://support.lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=MIGR-72900
Your tip size is 2.5mm x 5.5mm, 19volts, and your current adapter is 90watts, right?
Your tip size is the same as what is in the y450, y460, y550p, y550, y560, and the y730.
The y730 is listed under the adapter listed above as taking the 4R 4319 tip, which is the same size as yours.
The tip, Pt. # 46 4319 is listed as an optional tip for the ultraslim adapter, Pt. #4IN8460, that tip has to be ordered separately from the adapter, it doesn't come with it.
Scroll to the bottom of the link for the adapter and you'll see the listing for the 19 volt tip, pt. #4R 4319.
All this is assuming that you have integrated graphics.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Hi my iPad air screen has broken how much you guys charge

hi my iPad air screen has broken how much you guys charge

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
The warranty will apply to the country of purchase. And if there is a problem needing repair you have to return it to the country of purchase.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace (Apple doesn't repair) your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below. (The replacement will most likely be a refurbished iPad in a brown box, however, it has a new screen, back and battery.)
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th, Air
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iCracked - Broken iPhone, iPod or iPad
http://www.icracked.com/
iReVamp Electronics Screen Repair ($99)
http://www.irevampelectronics.com/ipad-2-broken-glass-screen-repair.html
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
Do It Yourself iPad Repair
http://www.ifixit.com/Device/iPad
 Cheers, Tom

Hi my iPad air screen has broken how will you guys charge

hi my iPad air screen has broken how much you guys charge ??

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
How much it will cost to replace the iPad (it's replaced, not repaired) depends upon what country that you are. In the US the price for repair for the iPad Air is $299 (from here, add $6.95 if shipping is required). Here in the UK it's £249 (from here, add £7.44 if shipping is required) :
iPad model
Out-of-Warranty Service Fee
iPad mini
£169
iPad, iPad 2,
iPad mini Retina
£199
iPad 3rd, 4th generation,
iPad Air
£249

How do you guys do remote access?

Hi All,
I have a customer with a MAC at both office and home. When she is a home she would like to remote into her work computer (okay'ed by her boss) to work on various things (she is a graphics artist).
How do you guys do remote access? Do you have anything like Linux's XRDP?
What ports and what protocol (TCP, UDP) do you use?
Many thanks,
-T

So something like Goodreader or Dropbox would work...if the files are *.doc's you could use Quick Office Pro HD to edit them. An iPad probably isn't the place to do complicated edits, however...either of these apps will allow a file local to the iOS device to be stored, then sent to another app such as Quick Office Pro HD...or you could also have the files stored in an email folder in say, Outlook, and then have that folder sync to the iOS device OTA with the iOS Exchange client...

How would you guys block portable Apps like Skype,firefox,Kproxy and gtalk etc etc ?

Hi,
how would you guys block portable Apps like Skype,firefox,Kproxy and gtalk etc etc ?
it just runs from USB / Local HDD .
obviously I could just block all USB ports but is there a better way?

Hi,
Preventing users from running portable applications can be done through:
Configuring specific User Account Control Settings
Software Restriction Policies
AppLocker
More information, please check this similar thread:
How to block portable application & prevent installation on Active Directory?
http://social.technet.microsoft.com/Forums/en-US/winserverGP/thread/dfd21e22-b245-4d2b-b9c7-912fe357653e/
Hope this helps!
Regards.
Vivian Wang
TechNet Community Support

HT3775 how do you import movies from an i-kam xtreme eyewear video camera hunting glasses into imovie?

how do you import movies from an i-kam xtreme eyewear video camera hunting glasses into imovie?

Here you go Karsten:
http://www.hunterspec.com/content/i-kam-xtreme®-video-eyewear-0
Looks like it records in AVI format at 25 fps. I think that should import to iMovie OK - if not it should import to iPhoto and then be available in the iMovie Events Library under "iPhoto Videos". Importing shouldn't be a problem based on this extract from the web page:
"The glasses can be hooked directly to a PC with the supplied USB cable to view the video, or when using the Micro SD card, it can be inserted into a card reader to watch footage."
John
EDIT: Also, see this point under Features: "Easy PC/Mac USB Connection (no driver needed)"
Message was edited by: John Cogdell

How do you import photos from a Canon EOS 60d into Lightroom without distortion of photos?

Is there a plug in needed or how does one get the photos from Canon EOS camera into Lightroom? My come through looking distorted and noisy.

Ok, full story...
I have a Canon EOS 60D and was editing in DPP software that came with the camera.
I wanted more editing options so I bought Lightroom.
All of a sudden photos that look good at home were being sent to printer and I was being told they couldn't print them at all. If I take the exact same photo, import it into the DPP software and edit it to look good on my computer and send it to the same printer they print it with no issues.
I was selling on Deposit Photos some, now they won't even accept my photos the quality is so bad. But again, same photo edited in DPP they accept again.
THere are two issues I am having, the one going to the printer or deposit photos is they leave my computer looking bright and good to me and get to the other site so dark you can't see the photo at all.
The biggest issue I have been noticing is if I shoot with 200, 320 or 400 ISO, they look very fuzzy and I thought pixelated at first. After reading forums with other Canon users having the same issue, people are saying it isn't true pixelation. That the real problem is Lightroom not being able to intrepret the data so they look like there is a lot of noise and I have a bad picture.
Before reading forums, I had also emailed Canon to see if there was an issue with my camera. This was Canon's reply.... If you are recording RAW image files, are you using the Canon software to convert them to jpg or a third party program? Sometimes programs like Lightroom and Photoshop do not interpret the files correctly and the result could be noise or a colorshift. Please make sure that you are using the latest version of the RAW plugin for which ever software application you are using, or try using the Digital Photo Professional software included on the EOS Solution disk.
I use Lightroom 4 and it has been updated regularly to the latest updates as they come out.
I shoot in RAW only and never shoot above 400 ISO, usually 160-320 range.
I have taken the same photos at 400 ISO and opened them in the DPP software and there is no noise at all, nice and clear. I am only having this issue when I put them into Lightroom.
I would really prefer to edit in LIghtroom as you have a lot more creative options there but there has to be something I need to do that they work in Lightroom as they do in DPP. I have also used NERO in the past with no issues. The printer person I send to is accepting them in Photoshop.
Do I need to purchase some sort of plugin to have them work in Lightroom? Distortion was a bad choice of word, more fuzzy noise look then true distortion, sorry about that confusion.
Thanks
Ann

How do you guys like your GFX5900XT's???

Hey im in the market for a new computer and Ive been searching around for a good video card for the money. Well i came across PCSTATS review of the MSI
FX5900XT.
http://www.pcstats.com/articleview.cfm?articleID=1543
It blew me away that a card priced less than half could overclock so high and reach 5950 Ultra like speeds while still being stable.
I came here to ask how you guys find your 5900XTs and what (if any) overclocking issues you may have. Is it really that good?
Thanks

I CAN'T OVERCLOCK MINE AND CAN' :angryfire:T MONITOR TEMPERATURA
FAN RPM AND VOLTS
BUT HAVE VERY GOOD RESULTS IN BENCHMARKS

How do you guys upgrade the DDL of your apps?

This is to start a brainstorming discussion, just like the one you would have between DBAs and developers around the watercooler...
I am considering revamping the way DDL upgrades are done in-house. I was wondering how you guys go about doing that, whether you are an Independent Software Vendor or the developer for an in-house application.
if you're an ISV, how do you supply and implement new versions of your DDL to your customers?
if you are responsible for the development/maintenance of an in-house application, how do you carry out your DDL upgrades?
I would like your responses to be around the methods and the tools you use to upgrade the SQL code (mainly the DDL) of your applications.
Looking forward to everyone's input.

In a modern application, a developer should seriously consider Edition Based Redefinition (EBR) - a feature (comes with the database) every customer has since 11g R2. With EBR, have the ability to install new versions of your code (plsql, triggers, views, synonyms -etc) in the database without impacting (blocking, locking, overwriting) the existing version. So you can install version 2 of your application while version 1 is still running.
Additionally - taking it a step further - if you put editioning views in place (a special kind of view that allows you to only select from a single table, no where clause, just a select list - sort of like a synonym with a select list), you can achieve many online DDL upgrades as well.
for example, let's say you wanted to add a new index to a table, change the format of an existing column from number to varchar2 (to allow for alpha-numeric values in the future) and drop an existing column that is no longer needed - you could (assuming the editioning views are in place):
a) create a new edition as a child of an existing edition. It'll be as if you copied all of your code/synonyms/etc - you haven't, but it will feel like it
b) add a new column of type varchar2. (this column will NOT be visible to version 1 at all in any way)
c) put in place a forward edition trigger that will take any modification of the existing number column and reflect it in the new varchar2 column
d) use dbms_parallel_execute to update the existing number column to itself ,this update can commit every 100 rows or so (no locking issues really) and will cause the new varchar2 column to be populated for all existing rows. any new rows added by version 1 of the application will automagically be reflected
e) in version 2, create a new editioning view that selects out the right columns from the table (don't select the number, select the varchar2 and alias it as the old column name if you want)
f) put your new plsql/synonyms/grants whatever in place in version2
g) create an invisible index on the table you wanted to index - you can do this online. the index will be invisible so it won't affect ANY existing query plans (you haven't tested the old sql with it - you just know that version 2 likes having it)
Now version 1 is running and version 2 is ready to go. Easiest way to roll out would be to schedule a tiny maintenance window - alter the databases default edition to version 2, make the index visible and restart your app servers. the are now running version 2
a) drop/set unused the old number column
b) get rid of the forward edition trigger
if you'd like to read more about this:
A Closer Look at the New Edition
Ask Tom: Edition-Based Redefinition, Part 2
Ask Tom: Looking at Edition-Based Redefinition, Part 3
and of course
http://docs.oracle.com/database/121/ADFNS/adfns_editions.htm#ADFNS020
tom kyte

HOW DO YOU GUYS DEAL WITH APPLE.. SO CONFUSING...NEED HELP WITH SPECS FOR PURCHASE OF IMAC 21.5

Hi guys, been reading your forums, blogposts, etc and am getting more confused. I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side.
Good news,, I dont need a super giant system, I do simple editing for web videos, minimal graphics, no motion graphics, no animation etc. currently using CS4, will probably end up with 5.5.
I want to get imac 21.5 or 27 if i have to.. So here's the question we all have,,, what do I really need besides an Apple fairy godmother to figure this crazy stuff out?????
I want to be able to have firewire add on, but the rest is what I need help with. So i've been looking at cs6 specs, even though im not there yet, eventually will be,, so just need to run cs4 now and build from there. I also want to eventually move to final cut down the road so I want imac able to upgrade to final cut.
WHAT DO I REALLY NEED MINIMALLY FOR NOW? WHAT CAN I GET LATER IF i CHOOSE TO DO MORE AND NEED MORE POWER?
cs6:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8, v10.7, or v10.8**
4GB of RAM (8GB recommended)
4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for preview files and other working files (10GB recommended)
1280x900 display
7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certified GPU card for GPU-accelerated performance
Any responses would be great. I know you guys are busy answering the really high end tech questions

All the current iMac models (both 21.5" and 27" with OS X Mt. Lion 10.8) will run CS4, 5.5 and 6 just fine. They will also run Final Cut Pro X just fine. Ditto for most any application you may want to use.
Below are some notes (specific to your apparent requirements) that may help you with your purchase decision:
Notes on purchasing a 21.5" iMac
All 21.5" iMacs come with 8GB RAM but you cannot add more later. I strongly suggest getting the maximum RAM (16GB) when you order the iMac.
The basic hard drive is a 1TB 5400rpm drive. It will work fine with Adobe CS but you will probably want the added speed of the optional 1TB Fusion drive for better performance. Some people will recommend/argue for one of the optional SSD drives instead, but they are very expensive and still only come in relatively small capacities - I don't recommend the SSD drives. Get the Fusion drive and spend any extra money on a good external hard drive for backup and/or extra storage instead of an SSD.
Notes on purchasing a 27" iMac
All 27" iMacs come with 8GB RAM and you can add more later, up to 32GB
The basic hard drive is a 1TB 7200rpm drive - it will be fine with Adobe CS. There are upgrade options to a 3TB 7200rpm drive or a 1TB or 3TB fusion drive - these will be fine also. There are also SSD drive options, but I do not recommend them. (Same comments as above.)
Notes on all the current iMacs
iMacs no longer come with built-in CD/DVD drives. If you need one, you will need to purchase the Apple Superdrive accessory drive ($79)
All of the iMac graphic processors (GPU's) are compatible with Adobe CS 4, 5.5, 6
It is very difficult to impossible to change or upgrade the hard drive later on, so don't buy low-end thinking you can add a better internal hard drive later.
Be aware that Macs always come with the latest (most recent) version of OS X. And OS X Mavericks (10.9) is due to be released soon (in the next month or two). There is no guarantee that the older Adobe CS 4 or 5.5 versions will run on OS X Mavericks. If you cannot upgrade to CS 6 in the near future, you may want to purchase now rather than after OS X Mavericks is released.
For what it's worth, I'd recommend the 27" iMac if your budget can afford it. You will appreciate the larger screen size and added capabilities over the years you will use the computer.

How do you guys reduce noise in Canon 5d mark II video?

Similar Messages

Maybe you are looking for