How do you have a long video in the timeline and then save it as separate parts?

I'm looking to record playthroughs of video games and putting them on youtube. So what I would be doing is recording about 2 hours of footage. I'm trying to find out how to cut that 2 hours of footage up into 10 minute clips, and then save each individual clip as a separate file so I can upload that part onto youtube. If that is hard to understand, sorry, I'm bad at explaining things. But if you understand and know how to do this, please answer. Any help is appreciated. Thanks in advanced!

I agree that using the WAB (Work Area Bar) for the desired Duration, and then Sharing that, would be the best route. This ARTICLE goes into more detail on the WAB.
Good luck,
Hunt

Similar Messages

Have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for

have an ipod and then got the wife an iphone4. all passwords are screwed up. she can not access playstore cuz she doesn't have password. i can not get find any help on how to get or update a password for the ipod. and then get her a separate password for her iphone. we need to save her photos, music, etc to ? icloud and the phone stuff to verizon cloud? so when she gets her new Iphone6 she can have all her "stuff" back on the new phone. hope this makes sense. please offer suggestions here or at [email protected] thanks for your help!

Oh no! I'm sorry to see there's a lot of confusion here and data shared, x-rayDon. We can definitely work to fix. This happens when two devices share the same Apple ID, so she will need to reset hers. She can do so by assessing this link Apple - My Apple ID. You will need to decide who will keep the account if want separate Apple IDs since purchases cannot be shared unless you do Family Sharing.
RobinD_VZW
Follow us on twitter @VZWSupport

How do you transfer iphone 4 videos to the cloud?

How do you transfer iphone 4 videos to the cloud?

use iphoto and import the videos and pictures, then burn a disc.

How do you move a sound clip in the timeline?

I have not had this problem before. I have put many songs into the timeline, and repositioned them. Today I pulled up a project and attempted to reposition a song to fit in better with the clip, and I'm unable to do so. I can't select the song, or anything else. Obviously I have set or locked up this track, and I can't figure out how to unlock if that is what I have done. I have 6 songs on that track, Audio track 2, and I can't reposition any of them. I can't even remove them from that track. What am I doing wrong?

Hunt, most of my music files, over 9000 songs, are mostly mp3 files and a few are wma, and because of copyright laws I wouldn't use them in a commercial project I'm working on anyway. When I am working on a project for a client I will generally use higher quality WAV files. This project was being done just to learn some new techniques, gain some more experience with PPCS4, and expand my knowledge with the program. I have this huge number of music files and styles to work with, so I can do a great deal of experimentation to see what different songs can do to the mood of the video.
As a test, I did put the exact same songs into the timeline on a different audio track. The problem track is audio 2, and I duplicated those songs on audio 3. I did the exact same editing. I faded them in and out the same as before. Split one song into 3 sections had parts of it come in and out over a video section of 9 minutes duration. They are working perfectly. I was just working on one section of that project a half hour ago, and I was still able to select and move each of the four songs on that track any way that I wanted to. However, the track just above it in that same timeline, Track 2, is still frozen.
Hunt, just a moment ago I solved my problem. Still not being that familiar with the program, two days ago I know that I was playing with all of the controls, and I obviously hit one of them without knowing one of its side effects. I hit the show "show track keyframes". I'm sure that you know it, but I didn't realize that when that function is selected, you can't do much else with the track but play with those keyframe. Even though I didn't have the track locked, in the traditional way, it was still, for all practicall reasons, locked. I unchecked that function and now everything is back to normal again on that track.
Something very simple, as many things turn out to be when you understand it. However, maybe someone else will make the same mistake, and my posting here will help them.
I will use your suggestions for using .WAV files. Thank you again.
Terry Lee Martin
Date: Mon, 7 Sep 2009 14:29:37 -0600
From: [email protected]
To: [email protected]
Subject: How do you move a sound clip in the timeline?
Terry,
What is the purpose of using the .WMA files? I'm sure that you have a good reason, but they can be problematic, at best. I only use them as a trasfer medium, when I need to get a DD 5.1 SS soundtrack into Audition for editing. There, I break them out into 6 discrete .WAV files, edit in Multi-track Mode and then usually Export as the 6 discrete WAV's to be encoded to DTS, or similar.
If you do not have a compelling reason for using the .WMA, try PCM/WAV @ 48KHz 16-bit and see if the issues go away.
Good luck, and let us know how it goes please,
Hunt
>

How can you make your persona show on the top and bottom? Also can you make it bigger at the top to show more of the picture?

How can you make your persona show on the top and bottom?
Also can you make it bigger at the top to show more of the picture?

Add extra empty toolbars if you want to see more of the persona.<br />
You can create extra toolbars to get extra space via View > Toolbars > Customize<br />
You have to put something on a toolbar (drag a Space item onto it) before closing the Customize window because empty toolbars are automatically removed.<br />
See http://kb.mozillazine.org/Toolbar_customization

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

Is it better for your battery if you let it run down all the way and then charge it? Or to charge it whenever you have the opportunity? Which is better for the life of the battery?

I was wondering it the life of the battery would last longer if you let the battery run down all the way and then charge it? Or to charge it whenever you have the opportunity even if it doesn't have a low battery? Which is better for the life of the battery and prolong the life of the battery?

I've had a iPhone 4s since March 2012, and it's battery is pretty useless now. I was using the app Battery Doctor (Battery Saver, Battery Life) by Beijing Kingsoft Internet Security software, which encourages the user to charge more often, whenever battery life drops below 100% full and greater than 20% full, and gives ratings according to the number of full, partial & overcharges done, but I'm concerned that charging like that actually results in worse battery life??
I now have an new iPhone 5 and don't want the battery to only last as short as the last one did
Any advice/comments please

Sometimes my ipod nano will have a voice announcement of the song and then skip to the next song on the cd and then announce again and skip again over and over again??

Sometimes my ipod nano will have a voice announcement of the name of the song playing after the song starts and then skip to the next song in line and then repeat the announcement and then skip, again and again....

Sounds like VoiceOver has been activated. See this article for instructions on how to turn it off.
iPod nano (6th generation): How to use VoiceOver
B-rock

How to open a file, process it with different runnables and then save it

Hi,
I want to read an image file, then process it using different runnable classes and then save the output in a different image file.
In which order should I put the threads? Each process has (of course) different execution time, so I need to know where to put the wait() or lock statement.
Any idea?
Thanks

gmf wrote:
Here is a diagram
/ One image analysis - image is a buffer\
Main/ \ save to one image
\ Second image analysis - image is a buffer/Main calls the others, and all the images are buffers so there is no problem about how do they keep from stepping on each other's toes.
Are those two separate buffers, both copied from the original image?

How do you have two classes drawing to the same JPanel? Graphics g problem

Hi all,
This is probably a five second answer but im really stuck on it!
How do i have two classes both writing to the same JPanel?
I have one class that extends JPanel and using Graphics g, draws to the panel ie g.drawString(..);
But i would like another class to draw to the same panel, so that the two different classes can both draw what they like to the JPanel.
How do i do this?
I have tried sending the Graphics g object from the one class to the other but only the original class draws still. I was thinking perhaps if it carn't be done could i have a JPanel on top of the other one that is transparent so there would be a tracing paper effect?
Many thanks

I have tried sending the Graphics g object from the
one class to the other but only the original class
draws still. I was thinking perhaps if it carn't beThis is the right idea. One problem you may be running into is that JPanel fills in its background with the background color by default. If you switch and use JComponent instead of JPanel you may get better results. Another idea is to use a "painter": a class that has a paint(Graphics g) but is not a component and just paints on a component. I've done this before in implementing Tetris where the dropping piece is a class which can paint itself but is not a component.

How do you add a small video into the Presenter Panel on the top right

I'm using Presenter 7.01
I cannot seem to add a video of a taking head to the Presenter Panel.
I can add video to the main slide no problem but there does not seem to be any option to add video to the top right panel and then display a presentation slide for the duration of the video.
If I go into the Slide Properties, and click on the Slide, the Edit button stays greyed out. I can only get the Edit button when I choose multiple slides, but then the options are limited.
Any ideas please?
Cheers

Adding THV is now done using 'Import Video' dialog. There is a small set of radio button to specify if you want the video on slide or on the the sidebar (top-left).

How can you create a karaoke video with the music lyrics?

I'm working on a generic music video. I want to add written lyrics to the video so that people watching can follow along with the singing. What is the best way to create trailing lyric highlights to the way the song is sung?

QuickTime Player Pro ($30) and lots of patience.
QuickTime Player supports "text" tracks and, with some special manipulation, can display the text "karaoke" style.
QuickTime Player 7.6.6 (not the X version) can play ".kar" files. Millions of them found on the Web and easy to download. They include MIDI audio (computer generated sound) and are very tiny in file size.
http://homepage.mac.com/kkirkster/64/
I downloaded a .kar file using QuickTime Player Pro and the Movie Properties window, extracted the text track and then changed the text using TextEdit. I then added my new text track and deleted the original.

How can i have 2 seperate phones on the cloud and not duplicate my contacts and stuff?

I have 2 iphones on my account, when I set up icloud it merged both contact files, notes, apps and everything else. the only way I have figured out how to keep it seperate is that I turned off the icloud sync on my wifes phone. isn't there a way to have them both sync there own stuff?

These articles may be helpful using one computer and multiple devices:
http://support.apple.com/kb/HT1495
http://support.apple.com/kb/HT1386
Log into your shared computer with a different account and you can set up your own iTunes, calendar and contacts.

Can you have multiple audio bits in the timeline?

I'd like to have multiple audio pieces in one slide. They would be text to speech parts but I want them to be independent in the timeline so I can place them at different times in the slide play or when a button is clicked for example. Is this possible?
I've tried multiple TTS items but they generate audio into 1 audio file in the timeline which is not what I want. If Captivate 6 doesn't have this ability I'm going to be really disappointed.

It is the same work flow IMO but you use a text caption whereas I prefer a highlight box for which I have a dedicated style. Think you find my blog post more complicated because I explained also how to control the audio using show/hide the object it is attached to. In your case you only use them for their timing functionality. In your original question you didn't speak about TTS... something I never use myself, prefer doing VO.
Lilybiri

How do you hook your mac up to the tv and get audio?

I figured out how to get the image on the screen, but I can't figure out how to get the audio to come from the TV and not my mac.
So does anyone know how to fix that?

What model Macbook Pro? What OS?, What connector are you using? What connector on your TV? If you are using Mini Display Port to HDMI or other connector you may need to use a separate audio cable.

How do you have a long video in the timeline and then save it as separate parts?

Similar Messages

Maybe you are looking for