How do you have couninous play with cover flow

How do you have continous play with cover flow

You don't. It plays from the track you select to the end of the album, optionally repeating.
tt2

Similar Messages

How do you have multiple apple id's with one itunes

how do you have multiple apple id's with one itunes

I have multiple IDs and use the single computer sharing itunes. By 'sharing' I mean we open the pc, open itunes and log in with our individual ID as required.
While Im logged in I plug in my device. I transfer my purchases from my device as per the file menu (not the check for auto downloads). I move them as required to whichever playlist I like.
Then when my son wants to use itunes or update his device, he logs in, plugs in his device, transfers purchases from his device, puts whatever music he wants into his playlist and/or drags direct to the device regardless of who purchased it and then syncs.
Im not sure how it works associating the pc with only one ID or all that other business- I know I don't fiddle with any of that.

HT1212 Using the "if you have never synched with itunes" instructions, will I lose all data on the phone? That is the most important information, how to recover the data. The phone is fungible.

Using the "if you have never synched with itunes" instructions, will I lose all data on the phone? That is the most important information, how to recover the data. The phone is fungible.

Thanks @ KiltedTim, but losing "only" any data is really not acceptable and, in this case, the phone had not been backed up, but thanks for taking the time. Also, yes, fungible means what I think it means. An iphone is a completely substitutible commodity, unlike my data, so instructions that inform me as to how to fix a phone I could replace for a small sum of money while failing to address the more important issue of the data are almost useless - they potentially save me the $99 it would cost me to replace the phone if I were so inclined to trust another apple product. Not worth the hour it took to find them or the 35 minutes on the phone to confirm my suspicions about the data.

How do you magnify small writing with os x maverick? I have a imac

How do you magnify small writing with os x maverick? I have a imac. Perviously i would push control and the mouse .

Control scroll should still work in Mavericks, it does for me.
In addition, Safari can also be Zoomed in to varying degrees by using either View Zoom In or the Command +- keys.

How do you run .exe files with wine by clicking on them?

Hi, I need help with using wine on mac osx. I used to use wine on Ubuntu and Linux Mint and it was relatively simple. But on mac osx, I used macports to dowload/install wine, and i used winecfg to create a prefix. I can not figure out for the life of me how to launch an executable by clicking on it. It opens in TextEdit instead of launching in wine. Can someone explain to me how to make a .exe file launch by clicking on it? Do i have to register the filetype with wine? Wine is not in a .app format. I can run any .exe in terminal but it is less than convenient. Thanks in advance.

So wrap Wine in an application, and bind the .exe's to the wrapper application.
Platypus (free download)
<http://www.versiontracker.com/dyn/moreinfo/macosx/19870>
Can be used to turn any Unix program or script into a double clickable application, as well as a drag and drop target application.
It should be possible to wrap Wine with Platypus.
As an alternative, you might try Applications -> Automator -> Run Shell Script workflow, and save that as an application. Then bind your .exe's to that workflow you created.
NOTE: I have not played with Wine, so your mileage may vary.

How do you manually manage podcasts with the new iTunes?

Like the subject line says: How do you manually manage podcasts with the new iTunes?
With the previous version of iTunes, when I plugged in my iPod, I could select the iPod, select podcasts, and manually delete episodes. With the new iTunes, I can't select individual episodes when looking at my iPod through iTunes. Is my only option to Sync? If so, why is that my only option?
This question probably has a simple answer, and I'm just not seeing it.

Rock,
I think I figured out a way to do what you want to do - which is the same way that I use Itunes with my Ipod. (My Itunes libary was destroyed last year so I can no longer auto synch my Ipod as I would lose thousands of songs).
Funnily enough, I discovered this new way of manually moving podcasts while trying to figure out what cpragman was trying to say (I never could - he must be smarter than me, as I couldn't get his method to work).
1. Open up your Itunes in your regular Library view. Choose Pocasts from the left hand side (either in the sidebar if you have that enabled, or from the little "radio" icon if you don't.)
2. Mouse to the podcast you want to place on your Ipod.
3. Right-click it. A long menu will pop up.
4. Move to the "Add to Playlist" option. As you hover, all your playlists will be visible. But at the very top will be the name of your Ipod itself (whatever you named it originally). Choose THAT name, and voila! That podcast will now copy to your Ipod and be easily available when you disconnect.
A nice feature of this method is that you can shift-click several podcasts at once and do the same thing, and all your selected podcasts will copy over (if you're like me and update your Ipod only every few weeks).
Hope this helps - let me know if it works for you!

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

In print preview - how can you have multipage previews of the document - 1 - 2 - 3- 6 - 12 page preview and so on so that you can see if the document is ok to print?

WINXP - In Explorer you can have multi-page print previews from 1, 2, 3, 6 upwards to check and confirm that the document will print correctly to your needs - and does this across the screen format as opposed to down the page, so that you can see all 12 pages on your screen to quickly see that the print percentage is correct and all pages fall into the print area and so on - how can you set this up with Firefox, because printing with Firefox is so unstable, you don't know what to expect when printing a document or web page?

No what I mean is how can you see many pages across the screen without having to scroll like in explorer where you can see 12 or more small pages on your screen without scrolling down, like tiled across your screen as opposed to vertical down the page. Thanks

How do you structure a .book with an EDD?

Hi all,
I am learning how to convert legacy, unstructured FM documents into structured FM documents and need some help. So, I created a conversion table from my unstructured documents, created the EDD, applied the EDD to the unstructured document to create a structured document and now need to tweak the EDD.
My question is, what is the correct way to layout the EDD rules for a book using multiple document styles? For example: My book contains a title page, TOC, one or more chapters, a glossary of terms, and one or more appendixes (or is that a appendicies?.)
I am thinking the element rule would look something like this:
Element (Container): BOOK
Valid as the highest-level element.
General rule: TitlePage, TOC, Chapter+, Index, Appendix+
Followed of course by other elements required for the structure. However, I did see an EDD that I am sure was outlined like this (though I can't recall where:)
Element: TitlePage
Valid as the highest-level element.
General rule: Blah blah blah
Element: TOC
Valid as the highest-level element.
General rule: Blah blah blah
Element: Chapter
Valid as the highest-level element.
General rule: Blah blah blah
Element: Index
Valid as the highest-level element.
General rule: Blah blah blah
Element: Appendix
Valid as the highest-level element.
General rule: Blah blah blah
If the second structure is correct, how do you define the Book element? On the Adobe forum, I was told one EDD should be created for all book elements, which makes sense to me.
Okay people, fire away. Remember I am a neophyte in structured FM.
Thanks,
Adam

Thanks Van, that does clear it up for me... a little. My confusion now is, if I set all the book sections as valid at the highest level, then how does the book get structured as the starting point for the sections contained within it? I have tried to find a sample EDD detailing exactly this, but to no avail - my search brought up courses where this is covered, but not the actual EDD structure.
When I try to structure the book with the EDD, the book comes up red with its children elements looking just fine. Ahh! You have to love that learning curve.
Regards,
Date: Thu, 24 Sep 2009 06:43:41 -0600
From: [email protected]
To: [email protected]
Subject: How do you structure a .book with an EDD?
Adam,
Following up on some of Russ's sage advice, you asked:
If the second structure is correct, how
do you define the Book element? On the Adobe forum, I was told one EDD
should be created for all book elements, which makes sense to me.
As Russ said, your BOOK element looks fine. Not sure how far you have gotten, but when you open a document file that is in the book, its root element will be Chapter, TitlePage, Appendix, etc. That is why you have to declare each of these as being valid at the highest level. When you click in the book file window and look at the structure view, you will see that the BOOK element is the root element, and its content will be TitlePage, TOC, Chapter, Chapter,...etc. The book and all of its component files have the same EDD. The definitions for the BOOK element, as well as the TitlePage, TOC, Chapter, etc elements are all contained in the same EDD. I hope this helps to answer your question.
Van
>

How do you have more than 1 ipod in your family and only 1 computer to be able to each have a separate account?

HOw do you have more than 1 ipod int he family and be able to have your own itunes on 1 computer?

Did you read the support document at the other end of the link? What additional information do you desire?
The Apple support document How to use multiple iPods with one computer (n.b. same link as above!) suggests a number of ways for managing the media content. I use method two (Sync with selected playlists) with a slight twist. Rather than regular playlists I set the grouping field to indicate which users should receive which tracks and create smart playlists based on the content of this field.
e.g.
"Alice's Tracks" is "Grouping contains Alice" + "Kind contains audio"
"Bob's Videos" is "Grouping contains Bob" + "Kind does not contain audio"
Tracks that both Alice & Bob want on their iPods have the grouping set to "Alice/Bob"
etc.
I currently manage our family's five iDevices using this system, each getting a different selection to suit their tastes and the capacity of their device. An advantage of using the grouping field is that it is stored in file tags (for non-wav audio files anyway) so that it is relatively easy to recreate the playlists should the iTunes library get trashed and need rebuilding. Also useful if you move files about manually as playlist membership is preserved when you delete & re-import the tracks.
tt2

Please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in.

please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in. Iv never used an ipad b4 so don't really know much. Hope some one knowz.

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Connected to tv.how do you fill the screen with the ipad

Have connected to tv all ok but how do you fill the screen with the mirror image from the ipad

Yes I have the iPad cable bought from apple

HT2513 how do you get the sidebar with three months of just calendar to turn on-is this feature gone?

how do you get the sidebar with 3 months of calendars on the left? Is this feature gone?

Im sorry but I figured it out now. I hate when you figure something out right after you do something extreme like signup for a profile here and post a question. Well to those who want the answer all in one shot there are 2 solutions for me.
1. Make sure Safari is updated completely. You can check by clicking SAFARI> ABOUT SAFARI
Safari 5.0.5 gave me this problem but the new update is 5.1.2
2.Glims - Free ad on for Safari which enables you to view you window in COMPLETE full screen at all times, as well as maximise your window to fill all empty space (makes so you dont have to worry about accidentally clicking on your desktop which I do all the time lol). You can use this option once Glims is installed simply by clicking on
SAFARI> Full Screen
or
SAFARI> Maximise Window Size
By doing Full Screen mode you can then click on the full screen capability on the website you are on

HT1918 How do you solve an issue with the card? I don't get the option of 'none' :(

How do you solve an issue with the card? I don't get the option of 'none'

I had this exact same problem with the new iPhone I bought on 1/4/13. The walk through they provide on how to do this is useless because it fails to explain that if you are already having the problem of not getting the "None" payment option with an Apple ID then you will need to create a completely new Apple ID.
I had to do this 7 times since I bought my iPhone on Friday until this morning to figure out how to finally be able to use the Home Sharing option in iTunes to put my music collection on my brand new $500.00 iPhone. Pretty pathetic if you ask me but since it made me so angry I want to make sure other know how to do this so you don't get as upset as I did.
#1 If your current or soon to be "old" Apple ID is not providing the option for "None" as a payment option then you need to make a brand new one. But you have to make it specifically how I tell you.
#2 You will need to use an email address that has not already been used for anything related to a previous Apple ID. You might need to make a brand new email address.
#3 Open iTunes, then open iTunes Store (upper right corner of iTunes).
#4 Click on App Store (upper center of screen).
#5 Scroll down the screen page until you see Top Free Apps on the right side.
#6 Choose any one of the FREE apps.
#7 You should either get the option to create a new Apple ID box, either that, or it will pop up with some kind of disclaimer and then it does the create new Apple ID.
Either way just create a new Apple ID when it gives you the option to and then when you get to the page that looks like the payment page the "None" payment option will finally be available.
Note: You will still have to fill out the information on the payment page. As long as you choose the "None" option it will not request any credit card information.
#8 You will be sent a confirmation email to the new email account. Just follow through with what ever it tells you and viola now you can use your Apple Device.
What a pain in the keester, eh?

How do you have JList display user defined element

How do you have JList display the element you define???
I tried:
list.setSelectedIndex( 1 );
list.ensureIndexIsVisible(1);
because I want the element at index[1] in the list to be displayed when the GUI opens. It always defaults to element [0] (1st element).
So if I have
String[] colors = {blue, red, yellow};
when the GUI opens, I want "red" to appear in the JList, but blue is always displayed...

Sorry, that must've been cut off, here it is...
What I want it to do is open and I want "green" to be the only element showing in the JList...
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.border.*;
import java.awt.Container;
import javax.swing.JOptionPane;
import java.lang.Object;
import java.awt.event.*;
import java.awt.Component;
import javax.swing.JOptionPane;
import java.awt.BorderLayout;
//import java.awt.Container;
import java.awt.Dimension;
import java.awt.Rectangle;
import java.awt.event.MouseEvent;
import java.awt.event.MouseMotionListener;
import javax.swing.event.ListSelectionEvent;
import javax.swing.event.ListSelectionListener;
//import javax.media.jai.JAI;
//import javax.media.jai.PlanarImage;
import javax.swing.BorderFactory;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JComponent;
import javax.swing.SpringLayout;
import javax.swing.border.BevelBorder;
* Simple applications for demonstrating the use of FormUtility
* to hide the details of creating a form layout with
* GridBagLayout.
* <P>
* Philip Isenhour - 060628 - http://javatechniques.com/
public class correctOfficerGUI extends JFrame
        private JPanel form;
        private final JFrame f;
        //public final int lineCount = 0;
        //EASTERN NY
        public static String nameInfoString   = new String();
        String facilities[] = {     "blue",     "green", "yellow"};
    public correctOfficerGUI()
        //JFrame
        f = new JFrame("Add Officer");
        //int x = f.DoModal();
        // Make a panel to hold the demo �form", then
        // add it to the top of the frame�s content pane
        //JPanel
        form = new JPanel();
        f.getContentPane().setLayout(new BorderLayout());
        f.getContentPane().add(form, BorderLayout.NORTH);
        // Set the form panel�s layout to GridBagLayout
        // and create a FormUtility to add things to it.
        form.setLayout(new GridBagLayout());
        JPanel spacerPanel = new JPanel();
        spacerPanel.setLayout(new BorderLayout());
        final JList list = new JList(facilities);
        int index = 2;
     list.setSelectedIndex( 1 );
        list.setVisibleRowCount(1);
     list.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
     //contentpane
        form.add(new JScrollPane(list));
        JButton addButton = new JButton("Add");
        form.add(addButton);
        //addButton.add(
     addButton.addActionListener(
          new ActionListener()
          public void actionPerformed( ActionEvent actionEvent )//valueChanged(ListSelectionEvent e)
                    //f.DoModal();
                    System.out.println("********************************************");
                    JOptionPane.showMessageDialog(null, "The Officer has been Added.");
        // Add an little padding around the form
        form.setBorder(new EmptyBorder(2, 2, 2, 2));
        f.setSize(300, 300);//230);
        f.setVisible(true);
    public static void main(String[] args)
        correctOfficerGUI test = new correctOfficerGUI();
     test.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
}Message was edited by:
poncho

How do you have couninous play with cover flow

Similar Messages

Maybe you are looking for