How do you have the help file .chm hold its window position when the user resizes the help window.

One of my customers is complaining that the help contents will scroll out of view when the window is resized. Is there a way to anchor the position while the window is resized?

My CHM is a help file for an application. The application uses F1 to open specific topics for help. Therefore the help file needs to be visible but not cover the application to much. The Content in this situation is text however the help project contains Images, tables, text, etc.
If the user searches for the word "audio" in the search and it takes them to a section or sub topic that is half way down in the Topic, they would like that section or subtopic to stay in the same place as they resize the help window. Using Bookmarks if the topic is large enough clicking the search link will place the results in the top left of the doc view window, however this is not necessarily the top of the topic.
Im not sure how else to explain what the user is seeing, sorry.
Please explain "Also whether it remains consistent depends on whether an absolute or percentage value has been added to it."

Similar Messages

How do you have the CAD homepage?

On UCCX 8.5 how do you change the default home page for all CIsco Agent Desktops?

Hi
You run 'Csico Desktop Administrator' and change the settings under the 'default' workflow, or another workflow if you have some custom ones defined.
Regards
Aaron
Please rate helpful posts.

How do you have the bottom stroke of a table show up using Table Styles and Cell Styles only?

I am using InDesign CS6, and I want to create a Table Style that has the bottom stroke show up, but does not have a table border, such as:
However, whenever I try to change the Table or Cell strokes so that the last stroke shows up, I get the entire table border, or some strange combination of borders:
Does anyone have any insight on how I can get the bottom stroke to show up while preserving my other stroke properties? Since I work with long documents, it's necessary to be able to control all of my tables through Table Styles and Cell Styles, and not by manually changing each and every table with the Stroke palette.
For reference, here are the my current Table Style properties and the resulting table:

Michael Murphy is the InDesign style-meister. He wrote "Adobe InDesign Styles" for Adobe Press, and did a great Lynda.com title on InDesign styling. Here's what he says in the book:
"As mentioned at the beginning of this chapter, with all the power of table and cell styles, it is important to understand not only how they work and what they can do for you, but also to understand their limitations.
"Two formatting features missing in table and cell styles have already been discussed: You will always have to set the column width and row height of cells when applying a table style for the first time, and you will always have to convert body rows to header and/or footer rows every time you apply a table style for first time or update the table's data....
"But there's another kind of limitation that's important to keep in mind as you are designing tables: It is very easy to design a table that cannot be completely defined by a table style. In many cases, you'll need to define an extra cell style or two that lets you complete for formatting. [my emphasis]."
So I think that's what you have to do: Apply another cell style on top of the cells at the bottom of the table after applying the table style.

How can you have the app tabs positioned to the right of the FireFox button when maximized?

App tabs are '''normally''' positioned to the right of the FireFox button. However, when you shrink the window and then maximize again the app tabs appear below the FireFox button.
Anytime an app tab is open and you maximize, adjust window, maximize, the entire tab bar is bumped down under the FireFox button. Having just regular tabs open does not have this problem as they correctly position themselves to the right of the FireFox button when maximized.

Zero is in the middle where it says "none".

How do you use a dmg file image to download windows through boot camp?

after reaching my limits in finding the answer to this problem/question i have, i finally decided to post it for everyone to feel my pain
so i dont know if i would be spanked or something but i downloaded a windows xp sp3 from the internet through torrent
it was originally an iso file so i changed it to a dmg by using disk utility
now heres the problem:
after that, i opened the dmg file image and mounted the virtual drive
then when i started up the boot camp installation and clicked the "Start Installation" after about fifteen seconds it said that it couldn't find any disk installers!
AARRGG
it would be awesome if someone could help me
and this other question that i did not mention above is:
when you run windows xp on Parallels, is it slower than when you use windows on a PC or through boot camp?
thanks and hope you have a nice day

Hi and welcome to Discussions,
so i dont know if i would be spanked or something but i downloaded a windows xp sp3 from the internet through torrent
I don't spank you for that but I also don't comment on it as maybe this post will be deleted soon !
it was originally an iso file so i changed it to a dmg by using disk utility
now heres the problem:
after that, i opened the dmg file image and mounted the virtual drive
then when i started up the boot camp installation and clicked the "Start Installation" after about fifteen seconds it said that it couldn't find any disk installers!
The BootCamp Assistant requires Windows to be on a bootable CD/DVD and will not work with any kind of images, iso or dmg.
when you run windows xp on Parallels, is it slower than when you use windows on a PC or through boot camp?
Yes, since it is not running 'natively' , using the real hardware, but it is running on a virtualized environment.
How much slower really depends on the kind of programs you use in Windows, with typical Business/Office programs you might not even notice any slower performance, but with programs that depend on having access to the 'real' hardware, you will notice the slowness often right down to be un-useable.
thanks and hope you have a nice day
You too
Stefan

How do you drag'n'drop files from iP4s to Windows?

I don't have an iPhone.
But looking at whether it's worth it for my needs.
I often take photos on my Blackberry, then pop the memory card into my laptop, and copy the files into My Pictures folders.
It's very easy to do.
How would I do this if I took photos on the iP4S? Need step by step please.
Thanks.

KiltedTim wrote:
The only portion of the file system you have access to in this way is the folder where the camera roll is stored.
What do you mean by this?
If I were to plug in a brand new iPhone, and wanted to copy 10GB of locally stored music onto the phone, do I have to have iTunes *convert* the files into an itunes format, before it will then pass them over to the phone? Essentially doubling up the storage used for those songs?
Or does it convert them on the fly as it copies?
Or can the iPhone just store them in the same way as it does on Windows: computer folders, and there they are?

How can you have the "chat" or "message" site on Facebook show both your end of the conversation , and the other persons as well without going back to "message to hear the other parties response?

Does anyone know how to have both your message and the person you are messaging show up on Facebook as it does in chat. Chat does not work on my iPad as it does on the computer. I use "messages". But have to keep going back to messages to here the reply.

It is my blog... maybe you'll find more info there. I'm a big fan of shapes in all their forms, and of advanced/shared actions.
Here another link: Turn an Image into a Button - Captivate blog

I just synced my iPhone and lost all the info in notes from my phone. It was replaced with whT was on my iMac how do you make the sync go from phone to desktop and not the other way around

I Just synced my iPhone and lost all the info in notes I had on the phone. How do you have the info sync from phone to desktop and not the other way around as I usually make contact changes etc on my phone. I would then like to be able to sync that info from desktop to ipad thanks

It does make sense. The iPhone is a one-person device and just syncs to one computer.
The way it should work is as follows:
Old computer content ---> New computer
New computer <---> syncs to iPhone
But the way you are trying to operate sounds like:
Old computer content ---> iPhone
... and ...
New computer content <---> iPhone
So simply move your old stuff (either directly from iTunes, or from a computer backup) to the new computer, have it all there, then sync your iPhone to the new machine.

HT4859 how do you see the items that are backed up to iCloud - I have 4.5 GB that I have used but I cant find where to see those items...help

how do you see the items that are backed up to iCloud - I have 4.5 GB that I have used but I cant find where to see those items...help

That is everything in your iCloud account. Videos and camera roll photos are only included in your backup, the size and content of which you can see on your phone in Settings>iCloud>Storage & Backup>Manage Storage>tap the name of your device under Backup. This will show you the size of "Camera Roll", where these are contained. (You can't see any detail beyond that.) Photo stream photos can only been seen in your photo stream album on your phone, and they don't count against your storage so they aren't part of the 4.5 GB. Everything esle is either in the backup, the items listed in Settings>iCloud>Storage & Backup>Manage Storage, or on icloud.com, where you can see your contacts, calendars, etc.

I have the Apple IPod touch 4th generation. How do you update the iOS HELP!

how do you update the ios on an ipod touch 4th gen.

If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972

HT4946 I have had my iPhone for about a year, and I have a photo file from my old blackberry. When I go to back up my photos, it only backs up the camera roll. How do I back up the other album? The laptop where I had those photos broke, please can someone

I have had my iPhone for about a year, and I have a photo file from my old blackberry. When I go to back up my photos, it only backs up the camera roll. How do I back up the other album? The laptop where I had those photos broke, please can someone help.

You're going to have to email those photos to yourself.

I have downloaded video to iPhotos but how do you get the video to iMovies

I have downloaded video to iPhotos but how do you get the video to iMovies

In iMovie look in the Event Library. You should see an Event named "iPhoto Videos" (assuming the videos are compatible with iMovie).
Each time you open iMovie it will look for any new videos in iPhoto and place thumbnails in the iPhoto Videos Event. You will be given a choice as to whether you want the thumbnails generated now or later. The thumbnails will appear in chronological (date) order in the Event window. Note that the clips themselves are not actually imported to iMovie - they are simply referenced by iMovie (that is, iMovie points to the clips in iPhoto).
Drag clips (or parts of clips) to a project. To start a new project, select File > New Project from iMovie's menu.
Please ask if you need more advice. Otherwise, click on Help > iMovie Help in the menu. There you will find plenty of good information about how to use iMovie, including short video tutorials.
John
Message was edited by: John Cogdell

HT3825 so how do you convert the raw files to jpeg in iphoto?

how do you convert the raw files to jpeg in iphoto?

Many thanks Barbara and dj_paige.
What I didn't mention is that I'm using PSE 5 with ACR 4.6, if its relevant. I'm thinking of updating to the next version when its out in the hope that it will run with Windows 7 64 bit or I may go to Lightroom.
I can now see that I can batch convert a whole folder of files using "process multiple files" as dj_paige suggested but that is too many at once as the settings I choose won't be relevant for all the pics in the folder.
I was hoping to batch convert say 5 or 6 similar photos at a time with the same settings. I'm not quite clear what you're suggesting but I'm hoping that its a "work round" using two stages to achieve this.
I can't see a list of open files within ACR to ensure that they are all selected as you suggest.
What does clicking Open rather than Done mean? Does this amend the original RAW file to the settings selected so that if I then "process multiple files" on the whole folder to convert from RAW to JPEG they will in fact have already been processed in smaller groups so I can convert without applying any further changes?
If so, what settings should I apply to "process multiple files" to ensure a simple conversion of file type rather than any further adjustments?
Any further help on this would be much appreciated.
Andrew

How do you open a Numbers file sent from another Mac user with same operating system, i get a pop up that says I'm missing an index.hml file??? HELP PLEASE

how do you open a Numbers file sent from another Mac user with same operating system, i get a pop up that says I'm missing an index.hml file??? HELP PLEASE

The operating system may be the same but the Numbers applications are likely different. You need to get the apps in sync. Unfortunately, the Numbers (and Pages as well) saga is pretty confusing (and frustrating). Here's some info from the iWork resident version expert (PeterBreis0807):
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed almost 100 features from Pages 5 and added many bugs.

How do I find bad music files? I have thousands of files, but some are bad. When I try to load them into iTunes, it just spins. I need a routine to identify and remove the bad files. Any ideas?

How do I find bad music files? I have thousands of files, but some are bad. When I try to load them into iTunes, it just spins. I need a routine to identify and remove the bad files. Any ideas?

Hi ajoddo20,
Welcome to the Apple Support Communities!
You can use Home Sharing to import music and other media from one computer to another. Please use the instructions and information located in the attached article for information on how to complete the process.
iTunes 11 for Mac: Use Home Sharing to import items from another iTunes library
Cheers,
Joe

How do you have the help file .chm hold its window position when the user resizes the help window.

Similar Messages

Maybe you are looking for