How do you hide zeros using Number's formula?

I have cells with formulas, such as:
=J17*Q17
On my spreadsheet, there are thousands of cells like this. When not used, I want the output to be blank. Currently, it shows "0"
Is there anything I can add to my forumla that would make the cell blank?

There are several possibilities:
(1) Make your formula return the empty string when it should be blank. This is done with IF() like:
=IF(<condition for blankness>, "", J17*Q17)
(2) Set up a conditional format that hides or softens the display of zeros. See http://discussions.apple.com/thread.jspa?messageID=5088596
(3) Consider using Numbers not as spreadsheet with a large sparse table, but instead as groups of tables sized appropriately for the data they contain. The table can be readily resized later when more data needs to be accommodated. While this mode of thinking is discouraged in traditional spreadsheet usage, it can work quite well in Numbers. This is one of the distinctive and powerful features of Numbers that goes unrecognized by users coming to it from an Excel mindset.

Similar Messages

  • I am facing 'How do you want to use this disc' whenever I read/open any lightscribe discs having data.

    Hi,
    When I insert a lightscribe DVD/CD into a lightscribe optical drive, then when I click to open the DVD, I faced this error 'How  do you want to use this disc', although the DVD was full of data. When opening these 
    lightscribe DVD/CD via NON lightscribe optical drive, I noticed that the DVD/CD  opened well without any problems at all.
    Also, how can the System show to me 'How  do you want to use this disc' , in particular when  a DVD is non rewritable(DVD-R) and also contains data)?
    Bear in mind, not all DVDs/CDs were not detected. However, only full lightscribe discs' (having data)
    However, even blank lightscribe discs were detected without problems. When insert a lightscribe disc having data, then I faced that error. However, when inserting  blank lightscribe discs I found that the disc were opened.  Also,
    non lightscribe discs were opened well.
    When checking the device manager, I didn't see any issue with DVD/CD drive. If there were a problem unrecongnising, then I would have seen 'a remarkable mark' in front of it.
    Note: I have faced this problem after trying formating a rewritable CD inserted onto the drive. Althouthg the format failed, all data on the disc was deleted. Anyway, after that, then inserting full-lightscribe  discs are unregonised
    Do you think the problem wth my optical drive. IF so, I would be saying why it wasn't happened with all other non lightscribe discs. If my lightscrib discs were corrupted, then why would they have opened well on another laptop.
    I have done:
    Press the Windows logo key+R to open the Run dialog box.
    Type devmgmt.msc in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
    In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then clickUninstall.
    When you are prompted to confirm that you want to remove the device, click OK.
    Restart the computer.
    But the same prolbem is existing.
    yes there is a virtual CloneDrive program installed on my PC, however, there is no any CD mounted into it. Even if a CD was mounted into Virtual Clondrive, there would be no problem at all, because the virtual CloneDrive is used to only
      mount ISO disc images into it, and not physical discs.
    Any I have do what you have said, when inserting a light-scribe disc having data, then I open it, I found this
    NOTE: in the above screen shot there is a lightscribe DVD having data inserted. However, in the screen shot below, there  a ightsrbe DVD not having data inserted. In the first screen shot, the disc is not reconginsed by Windows, however, in
    the second is recognised. 
    Even when I have inserted a lightscribe disc not having data(empty), it opened well regardless of  what virutal CloneDrive is enabled or disabled.
    But when cliced on my problem didn't solve,
    A man should convert his anger and sadness into strength to continue living in this life.

    Hi,
    The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
    Notebook PC support
    The number of my computer is : LM610EA#A2N.
    Could anyone please at this splendid forum take some of their precious time
    out to really reply my questions and solve my problems?
    FIRST OF ALL:
    My HP Pavilion Laptop is about 3 years old.
    My
    sister's Dell Inspiron laptop is 3 years old.
    My HP lapotp is well-cared, as opposed to my sister's Inspiron Dell laptop,
    which is always thrown in dust without caring at all. Also, its battery is
    always inserted even when it is fully charged while the laptop is plugged in to
    the main power supply.
    However, my laptop is either used on only battery, or on plugin. Also, it is
    kept from the dust.
    But, I really found that the battery of the Dell laptop
    still lasts about three and half hours, and there is no problem cooling fan is
    not oproperly preporly.
    I only remember one thing differently done on my laptop battery which is I
    charged it fully, then I stored it without using it for about four months, then
    when I reused it, I found it got worse over time. I.e. first time of using it
    after storing,I found it empty, then I charged it again fully, however, then it
    lasted about 2 hours, then 1 and half hours, next an hour, now it is only
    lasting about 20 minutes without performance. If there is high performance, then
    the computer shuts down suddenly.
    My problem is follows:::
    First: Whenever I inserted any Containing Data OR Data
    CD/DVD-R LightScribe discs, I found that HP optical driver was
    unable to read them. When clicking on the optical disc drive
    'duble-click', then I find that disc opens as this way(NOT: With a CD/DVD player
    is grayed out)
    Blank Or Used CD, DVD±R,RW lightscirbe is unable to be
    read:(clicking on it let it Open like a USB FlashDrive or With a CD,DVD player:
    NOTE: with CD/DVD Player is grayed out)
    Used CD/DVD±R/RW Non-LightScribe disc opens normal:
    Blank CD,DVD±R,RW Non-LightScribe opens normal(Opens like a USB FlashDrive or
    With a CD,DVD)::
    My HP CD/DVD DVD±R/RW specis are::
    Optical Drives
    hp CDDVDW TS-L633R
    Media Type DVD Writer
    Name hp
    CDDVDW TS-L633R
    Availability Running/Full Power
    Capabilities Random
    Access, Supports Writing, Supports Removable Media
    Read capabilities CD-R,
    CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
    DL, DVD+R DL
    Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
    DVD+RW, DVD-R DL, DVD+R DL
    Config Manager Error Code Device is working
    properly
    Config Manager User Config FALSE
    Drive E:
    Media Loaded
    FALSE
    SCSI Bus 0
    SCSI Logical Unit 0
    SCSI Port 0
    SCSI Target Id
    1
    Status OK
    Trying to solve the problem,
    I have done these steps in order::
    I tried checking with dignostic ulitiy:
    I have tried Advanced View , this is the file of output data
    diagnostic utility
    LightScribe System Software Settings:
    SOFTWARE\LightScribe\MessageDir
    C:\Program Files (x86)\Common
    Files\LightScribe\
    SOFTWARE\LightScribe\LSPrintDialog C:\Program Files
    (x86)\Common
    Files\LightScribe\LSPrintDialog.exe
    SOFTWARE\LightScribe\LSPrintingDialog
    C:\Program Files (x86)\Common
    Files\LightScribe\LSPrintingDialog.exe
    SOFTWARE\LightScribe\LsPrintLauncher
    C:\Program Files (x86)\Common
    Files\LightScribe\LSPrintLauncher.dll
    SOFTWARE\LightScribe\ResourceDir
    C:\Program Files (x86)\Common
    Files\LightScribe\res
    SOFTWARE\LightScribe\LSPrintAPI C:\Program Files
    (x86)\Common
    Files\LightScribe\LSPrintAPI.dll
    SOFTWARE\LightScribe\Update\UpdateShellCommand
    http://www.lightscribe.com/go/downloads/windows
    SOFTWARE\LightScribe\Update\PreviousVersion
    1.18.20.1
    SOFTWARE\LightScribe\Update\CurrentVersion
    1.18.27.10
    SOFTWARE\LightScribe\Update\TrailingVersion
    SYSTEM\CurrentControlSet\Services\LightScribeService\Type
    16
    SYSTEM\CurrentControlSet\Services\LightScribeService\Start
    2
    SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl
    0
    SYSTEM\CurrentControlSet\Services\LightScribeService\
    SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName
    LightScribeService Direct Disc Labeling
    Service
    SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName
    LocalSystem
    SYSTEM\CurrentControlSet\Services\LightScribeService\Description
    Used by the LightScribe software components to support 3rd party disc labeling
    applications using the LightScribe COM Application Programming Interface
    (LSCAPI). This service needs to run for LightScribe direct disc labeling to
    work.
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported
    7
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0
    IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count
    2
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance
    2
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1
    SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
    SOFTWARE\Microsoft\Windows
    NT\CurrentVersion\Winlogon\allocatecdroms
    0
    SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
    SOFTWARE\INTEL\Intel
    Application Accelerator Not detected
    Drives and Media:
    Drive 0 : hp CDDVDW TS-L633R 0300 219 (E, Media
    Imaging Parameter : 114
    I tried running the below command line to fix potential disk issue 'Chkdsk
    /r /f'
    I cleaned the drive, discs, and so on.
    I have uninstalled the all third-party data recording software.
    I have uninstalled the Cyber DVD suite, lightscribe system software which
    came pre-installed with my HP pavilion Notebook.
    I have recovered my system from the Factory Recovery discs.
    I have tried opening all those LightScibe discs not opening on my HP optical
    drive, on a Dell optical drive, and all of them were opened well, although Dell
    optical drive did not have a lightscribe feature at all., nor third party disc
    recording software
    However, the problem is still with opening the discs LIGHT-SCRIBE
    Thus, my questions are:
    How to determine if the drive is corrupted and needs to be replaced with
    another one.
    I think there something needed to be done on the BIOS Of my HP
    laptop[[[A similar problems happened on my Desktop computer's optical
    drive which is as follows:::(ALL discs are opened as empty by Optical Drive of
    My Desktop Computer) ---while my optical drive of my desktop was connected to
    the primary slave IDE, and the HDD was connected to the
    primary master IDE, the optical drive and hard disk are functioning
    well. However, I remember that while burning an image with Nero essential V: 5,
    something went wrong, and then the Optical Drive of My Desktop Computer
    (HL-DT-ST DVD-RAM GH22NP20) became NOT recognised/Installed on
    BIOS, although it was still shown on the device manager as a
    recognised device. Also, it was listed on my computer, however, when entering a
    disc(blank or with data) into the drive, I found it was not recognised, and it
    opened empty(no files at it), although it contains data. Thus, I decided to boot
    to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was
    still shown as installed on BIOS. However, the optical drive was not. Th I tried
    clicking on it on BIOS and then clicking on 'enter' to try to let the device be
    re-recognized. However, that made no difference. I had to take part my computer
    ,and then reconnected the optical drive onto the secondary slave
    IDE , and let HDD connected to the same primary master IDE.
    Then, I found that the problem solved and all discs became being read
    normally. Aslo, optical drive became installed on BIOS]]]
    What is meant with with double Layer Support.
    How much does it cost?
    A man should convert his anger and sadness into strength to continue living in this life.

  • How can i hide my extension number when i make outgoing calls

    Hi All,
    How can i hide my extension number when i make outgoing calls,what configuration should i make on the call manager server.
    Regards,
    Lester

    We use a Route Pattern that mimics the telco feature *67. The RP is *679.xxxxxxx with a Transformation mask of 000000000 (just to get beyond the individual blocking on some private lines.

  • How can you hide a Continue button until all clickboxes are clicked?

    I have seen similar questions to this one, but none seemed to be the exact situation as mine.
    What I have: Several images on a screen.  When a user clicks an image it is replaced with another image.  I am using clickboxes for this task.  I do not wish for them to toggle back and forth. Once they click the original image it should stay changed.
    What I am trying to do: Once a learner clicks all the images (in no particular order) a Continue button appears that allows them to go to the next screen.
    If anyone has some suggestions on this situation please let me know, thanks.

    I cannot log in on the forum for the moment, so will try by answering by
    mail. I was aware of that problem (have presented those solutions so
    often), thought that since you left all images visible once the click box
    was clicked it wouldn't be a problem.
    Two possible solutions:
       1. Easiest one: add a statement in the Always decision that will Hide
       the click box just clicked. It has no sense to click it another time. That
       will mean that you still can do it with a shared action but that shared
       action will have two parameters now, the second one being the click box
       that has to adapted on each application of the shared action.
       2. If you don't want to make the click box hidden (which means at the
       same time disabled), you'll need a user variable for each click box,
       starting with a default value of 0, and toggle it in the Decision 'Always'
       to 1. The second decision will then need a condition that checks the value
       of all the user variables (with AND) and shows the Next button only when
       all variables have the value of 1.
    Sorry, but have to mail, cannot offer a screenshot in that case.
    Lilybiri
    2014-03-13 5:31 GMT+01:00 Joseph_McDonald <[email protected]>:
        Re: How can you hide a Continue button until all clickboxes are
    clicked?  created by Joseph_McDonald<http://forums.adobe.com/people/Joseph_McDonald>in *Advanced
    Adobe Captivate Users* - View the full discussion<http://forums.adobe.com/message/6205043#6205043

  • How do you remove a badge number from the app store without downloading...

    HOw do you remove the badge number icon for a program that you do not want to update from the app store.
    I have an app that is updated but i don't want the update (new ugly artwork and I am content with what the present artwork and app does)...I don't want the update. How do I remove/refuse the update and remove the number badge?
    Thanks!

    so you have an app on your phone that you do not want to update?
    But you want to get rid of that annoying badge from the appstore?
    There is a fix for this!
    Created by Elit3!
    if you post this anywhere else please acknowledge my find! thank you.
    new directions:
    1. go to itunes
    2. click applications
    3. right click on the application you want to use
    4. press show in windows explorer
    5. Copy the ipa to desktop
    6. right click and press open with
    7. open file with winrar, winzip, what ever, something so you can see all the files
    8. open iTunesMetadata.plist with PLIST EDITOR
    9. search for "itemId"
    10. Delete the number under "itemId" in between </integer>
    11. leave One number remaining. (any number)
    12. save.
    13. double click your new ipa
    14. sync
    15. No more update badge
    DONE.
    remember to backup everything you change. just in case.

  • Re: How do you create and use "common" type classes?

    Hi,
    You have 2 potential solutions in your case :
    1- Sub-class TextNullable class of Framework and add your methods in the
    sub-class.
    This is the way Domain class work. Only Nullable classes are sub-classable.
    This is usefull for Data Dictionary.
    The code will be located in any partition that uses or references the supplier
    plan.
    2- Put your add on code on a specific class and instanciate it in your user
    classes (client or server).
    You could also use interface for a better conception if needed. The code will
    also be in any partition that uses or references the supplier plan where your
    add on class is located.
    If you don't want that code to be on each partition, you could use libraries :
    configure as library the utility plan where is your add-on class.
    You can find an example of the second case (using a QuickSort class,
    GenericArray add-on) with the "QuickSort & List" sample on my personal site
    http://perso.club-internet.fr/dnguyen/
    Hope this helps,
    Daniel Nguyen
    Freelance Forte Consultant
    http://perso.club-internet.fr/dnguyen/
    Robinson, Richard a &eacute;crit:
    I'm relatively new to forte and I'd like to know how can you handle utility
    type classes that you want to use through out your application? Ideally
    what I want is a static class with static methods.
    Let's say that I have a StringUtil class that has a bunch of methods for
    manipulating strings.
    My problem is that we have code that runs on the client and code that runs
    on the server. Both areas could use the StringUtil class, but from what I
    understand, I have to create StringUtil in a plan and then create a server
    object of type StringUtil. The server object will eventually get assigned
    to a partition. That's not good since I really want the server object to
    physically reside at the server end and at the client end. (Actually, I
    don't want a server object, I just want to invoke a static method of a
    static class).
    Any clues on how to solve this problem would be appreciated.
    Also, what is the url at Sage-it that has a summary of all emails that have
    been posted to [email protected]? Perhaps this question has been
    answered previously.
    Thanks in advance
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Hi Richard,
    Your question about "utility classes" brings up a number of issues, all of
    which are important to long-term success with Forte.
    There is no such thing as a static method (method that is associated with a
    class but without an implicit object reference - this/self/me "pointer") in
    TOOL, nor is there such thing as a global method (method not associated
    with a class at all). This is in contrast to C++, which has both, and
    Java, which has static methods, but not global classes. Frequently, Forte
    developers will write code like this:
    result, num : double;
    // get initial value for num....
    tmpDoubleData : DoubleData = new;
    tmpDoubleData.DoubleValue = num;
    result = tmpDoubleData.Sqrt().DoubleValue;
    tmpDoubleData = NIL; // send a hint to the garbage collector
    in places where a C++ programmer would write:
    double result, num;
    // get initial value for num....
    result = Math::Sqrt(num);
    or a Java programmer would write:
    double result, num;
    // get initial value for num....
    result = Math.sqrt(num);
    The result of this is that you end up allocating an extra object now and
    then. In practice, this is not a big deal memory-wise. If you have a
    server that is getting a lot of hits, or if you are doing some intense
    processing, then you could pre-allocate and reuse the data object. Note
    that optimization has its own issues, so you should start by allocating
    only when you need the object.
    If you are looking for a StringUtil class, then you will want to use an
    instance of TextData or TextNullable. If you are looking to add methods,
    you could subclass from TextNullable, and add methods. Note that you will
    still have to instantiate an object and call methods on that object.
    The next issue you raise is where the object resides. As long as you do
    not have an anchored object, you will always have a copy of an object on a
    partition. If you do not pass the object in a call to another partition,
    the object never leaves. If you pass the object to another partition, then
    the other partition will have its own copy of the object. This means that
    the client and the server will have their own copies, which is the effect
    you are looking for.
    Some developers new to Forte will try to get around the lack of global
    methods in TOOL by creating a user-visible service object and then calling
    methods on it. If you have a general utility, like string handling, this
    is a bad idea, since a service object can reside only on a single
    partition.
    Summary:
    * You may find everything you want in TextData.
    * Unless you anchor the object, the instance will reside where you
    intuitively expect it.
    * To patch over the lack of static methods in TOOL, simply allocate an
    instance when required.
    Feel free to email me if you have more questions on this.
    At the bottom of each message that goes through the mailing list server,
    the address for the list archive is printed:
    http://pinehurst.sageit.com/listarchive/.
    Good Luck,
    CSB
    -----Original Message-----
    From: Robinson, Richard
    Sent: Tuesday, March 02, 1999 5:44 PM
    To: '[email protected]'
    Subject: How do you create and use "common" type classes?
    I'm relatively new to forte and I'd like to know how can you handle utility
    type classes that you want to use through out your application? Ideally
    what I want is a static class with static methods.
    Let's say that I have a StringUtil class that has a bunch of methods for
    manipulating strings.
    My problem is that we have code that runs on the client and code that runs
    on the server. Both areas could use the StringUtil class, but from what I
    understand, I have to create StringUtil in a plan and then create a server
    object of type StringUtil. The server object will eventually get assigned
    to a partition. That's not good since I really want the server object to
    physically reside at the server end and at the client end. (Actually, I
    don't want a server object, I just want to invoke a static method of a
    static class).
    Any clues on how to solve this problem would be appreciated.
    Also, what is the url at Sage-it that has a summary of all emails that have
    been posted to [email protected]? Perhaps this question has been
    answered previously.
    Thanks in advance

  • HT4061 How do you change your phone number than is in your iPad and replace it with right one to receive and send messages?

    How do you change your phone number in your iPad messages and replace it with another number. In order to send and receive messages to the correct phone number?

    It's best to use an email address on the iPad.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • How do you find your phone number?

    How do you find your phone number?

    You can't.  The iPod tuch does not have a phone number.  For the Messages and FaceTime apps you use the email address that yu set them up with.  With some oher texting apps like Text+, the apps assign you a phone number.

  • How do you change the phone number on an ipad mini in the imessage settings?

    How do you change the phone number on an ipad mini in the imessage settings?

    The Phone number of a Cellular iPad is assigned by the carrier the iPad is connected to.  Usually changing the sim card will change this number.
    If that is not what you mean can you please explain in more detail

  • How come you can not use more than 126GB of a 1.5TB diskdrive with LabVIEW Real Time?

    How come you can not use more than 126GB of a 1.5TB diskdrive with LabVIEW Real Time?
    This is only 8.3% of the available disk drive space!
    http://digital.ni.com/public.nsf/allkb/E7E2F5657B6​026358625750B007201A6?OpenDocument
    National Instrument's solution is either reformat you drive to less than 126GB or replace the drive with one less than that size.
    Please NI, tell me you are going to fix your LabVIEW Real Time soon, and that we won't have to wait for LabVIEW RT 9.2.1 in 2011 for this one to be fixed.
    http://upload.wikimedia.org/wikipedia/commons/9/90​/Hard_drive_capacity_over_time.svg
    Drives as large as 126GB or more have been around since about mid 2002.  That's about 7 Years now and LabVIEW Real Time STILL can't use drives larger that 126GB!  Please NI.  Do something.
    We deserve fixes to the old versions of LabVIEW RT.  How about updates to LabVIEW RT.  Such as 7.0.2, 7.1.2, 7.6.2, 8.0.2, 8.2.2, 8.6.2.
    We don't need new features or versions of LabVIEW RT such as 9.0 until we have some of bugs fixed in the existing versions. 
    Kevin. 
    Message Edited by kmcdevitt on 05-29-2009 03:39 PM
    Solved!
    Go to Solution.

    Coq rouge wrote:
    NI is not making the Real Time OS in house. I do not remember which firm that is making it. Anyway you are allowed to use a hard drive that has been partitioned. And 126GB is some space is it not? I remember Bill Gates declared one time that 640Kb ram should be more than enough for any PC application also in the future 
    Coq Rouge (formerly t06afre),
    The RealTime OS is an NI Product that is purchased from NI.
    NI may or may not outsource design, developement, or manufacturing of the products that it sells under its own Company name.
    For this reason I would be concerned if I were a PXI Embedded Controller designer/developer in the United States. 
    Yes, 126GB is some space.  I see that there are now 2TB drives available.  126GB would be 6.3% of a new 2TB drive.  Should we all be happy with being able to use 6.3% of the available drive space.  Moore's Law seams to be alive and well.  Drives larger than 126GB have been readily available for 5 or 6 Years.  This should not be a surprise to NI.  Why don't they do something about it.
    Thanks for the trivia on Bill Gates.  I must have missed that one since I don't try to keep up with Microsoft.  I believe that he is a wonderful person and he and his family are doing wonders for the world in their "retirement".   The world needs more like him.
    What I do remember is Steve Jobs telling us that we would never need more that 128MB and that we would never to need to do anymore software development because everything was already in the "ToolBox".
    McKevin.  

  • I just updated to IOS 10.10.3 and the new photos app.  How do you hide photos so they don't show anywhere?

    I just updated to IOS 10.10.3 and the new photos app.  How do you hide photos and videos so they only show in the hidden album.  Thanks

    When publishing from Lightroom to Facebook, you are always sending them to an album. Lightroom doesn't generate you posts though. Generally Facebook is smart enough to create just one post for all of your images published to a single album. If you are getting individual posts per photo there isn't anything you can do from Lightroom's side to change that. Try refreshing you page your newsfeed or timeline to verify whether individual posts are being created or if it's just a timing issue.
    Also, uploading images to Facebook will always result in your file having a different file name on the server and in the page code. No avoiding this, no matter your method of upload.

  • CS6 has two options when installing, try or enter serial number. How do you buy a serial number?

    CS6 has two options when installing, try or enter serial number.
    How do you buy a serial number?
    I would like to keep it going a little longer after the beta expires and convert it to a full retail version.
    thanks

    We are thrilled that you like the CS6 beta and are ready to buy. Unfortunately it has not been released yet. If you would like to be notified when it is available, go to this link and enter your information:
    Pattie
    Sign up to be notified when Photoshop CS6 is available for purchase

  • Help!! How do you hide caller I'd on iPhone 5 it was so simple on 4

    How do you hide caller I'd on new phone ???? It was simple before ....

    I don't understand why you posted this twice.  I answered it also at:
    https://discussions.apple.com/thread/4408198?tstart=0

  • How do you whiten teeth using iPhoto tools?

    How do you whiten teeth using iPhoto tools?

    You need more powerful editing software for that - iPhoto is good but basic
    PhotoShop Elements is a good value - Gimp is open source and free - there are many others
    LN

  • How do you download InDesign using the Adobe Download Manager?

    How do you download InDesign using the Adobe Download Manager?

    With the Adobe Download Assistant installed you should be able to initiate the download at http://www.adobe.com/cfusion/tdrc/index.cfm?product=indesign.  If this is not working for you then please try an alternate web browser.

Maybe you are looking for