How do you hold a PR?

hI aLL,
Is it possible to hold a PR? If yes how so?
Thanks,
Savindi

HI,
Once you have created a PR and you want to hold it (No further process like PO creation or RFQ).
Than You can use Purchase requisition closed indicator under Qty./Dates Tab, Tick Close.
Close indicator use to flag purchase requisition as closed, that means no further purchase orders are to be created for this pr.
But you want to hold than also you can use this indicator (Close), and when you want to do further process like create po or rfq. again run tcode me52n and remove close indicator from pr and save. it will allow to do further process.

Similar Messages

  • How do you hold the Magic Mouse?

    I've had my Magic Mouse for about a month now and the one thing that's really got me on the verge of swapping it out is how I inadvertently move the canvas when I'm working with Photoshop, Illustrator, etc.  With standard mice you don't really have to care about the state of your index finger  after you click or how it may slightly touch the surface as you move the mouse around, but with the MM it's something to be conscious of.  When I stop to inspect the mechanics of how I use a mouse, it's amazing how often my index finger inadvertently bounces back and forth from the surface.  When I'm lifting up, setting back down, considering a click, scrolling, etc.  I'm gonna try to consciously keep my index finger down when I'm moving the mouse around in hopes that it'll stop this unwanted result.
    So how do you hold the Magic Mouse?  Is your index finger always down when you move it around?

    Good question. Seems i use the middle finger for everything except for when I need to swap desktops or do other stuff with mission control.

  • 6280 - How do you hold yours?

    I was reading the instruction manual last night and it said that if you held the phone near where the antenna is located (At the top of the "bottom half" of the phone) when on a call, the call quality can be affected and much more power is used.
    Seems bizarre but it could be why people are having battery problems as this seems to be the most comfortable way to hold the phone when the slide is open?????

    I bought the "all-purpose, 12-piece" egrips sheet (clear, not colored), and it has a couple of strips that fit nicely along each long edge. There's a 3"x0.35" strip that fits nicely along the side without the buttons, and another 1.45"x0.35" strip that works well when put in the center of the other edge.
    They make a big difference in grip and handling, and my iPhone still fits into the dock.
    I also put some extra pieces on the back, but those only help when the iPhone lies on a desk -- they don't really help when held.
    I've only had them for a week, and, so far, they show no signs of coming off, even after multiple insertions/extractions from my incase belt pouch. They also don't make it significantly harder to put the iPhone into my pouch.
    Best of all, it's cheaper than the specialized iPhone egrips, and the sheet still has another set of the same (side) strips, just in case the first set somehow comes off.
    Message was edited by: MrSlinky

  • How Are You Holding Up California?

    I saw on the news this morning that there are at least 18 major fires all up and down the state.  The graphic looked like the entire state was going down in flames.
    Here in the Rogue Valley, it's smokey - extremely smokey from both CA and OR fires.  It's pretty crazy with this heavy smokey haze for days.  I was in Home Depot this weekend and it looked like they had their own weather system in the store. 
    Our Fire dept. has been taxed from businesses' false fire alarms going off because it's so thick.  And we've had to put up canopys over the air conditioning units (temps have been up to 109 for a few days).  Aside from that, it's business as usual.
    Are you CA folks holding up OK?
    This topic first appeared in the Spiceworks Community

    psychtaygar wrote:
    Have you ever Restored with Winclone? Does it make an image of the ENTIRE partition (if my bootcamp partition is 100 GB, my image is 100 GB), or just the parts that are used?
    WinClone always leaves out the pagefile.sys since it is not needed for restore and built up again by Windows on the next restart.
    Whether it imgaes the complete partition or only the parts of it that are used by files depends on the settings you make in WinClone.
    Regards
    Stefan

  • How do you disable repeat when key is down?

    When you press a key on your keyboard and hold that key down
    (the "A" key for example), after a second or so, it would start to
    repeat (so you would get "AAAAAA..." depending on how long you hold
    it down). This is really inconvenient for me in Flash and was
    wondering if there is a way to disable this or stop this from
    happening.
    I have this code in a file:
    stage.addEventListener(KeyboardEvent.KEY_DOWN, moveBox);
    I only want the moveBox function to be executed once, but if
    a key is held down for longer it executes multiple times.
    Thanks in advance for any help.
    -Robert K.

    An approach to try is to remove the event listener in the
    listener function for the keyDown event and then add the event
    listener again in the keyUp event listener.
    TS

  • Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared.  That doesn't work anymore.  How do you turn off the apps wit

    Before I upgraded my iPad mini, you could turn off apps to save battery power by double clicking the control button and then holding your finger on the app button until the minus sign appeared.  That doesn't work anymore.  How do you turn off the apps with ios7

    Now you swipe downward, the app will appear and you delete, keep scolling to the right as in the past.  With the new operating system you also swipe downward to get the search bar to find an app

  • TS1702 New iphone holder.  How do you delete an application.

    How do you delete an app?

    delete the app from itunes on your computer and also on your phone by placing finger on any app and hold it there untill all the apps wiggle. then tap the "x"on the app you want to delete and then confirm deletion

  • Downloaded IOS7 on my IPaD. How do you remove previously visited sites/apps.? Before you could hold your finger on the icon until it jiggled, then tap on the x.

    How do you close open sites? Before you only needed to hold your finger over icon until it jiggled, then tap to exit. Downloaded IOS 7 and big changes happened. Sure it is a simple thing to do but I need the help of Apple Support Communities. Thank you for any help you can provide.

    Double tap home button then sweep apps up to close.

  • Iphone 4 was dropped in cold coffee.  I let it dry in rice for a week.  It turns on but the screen is black, and if you hold it at an angle  you can see the apple logo.  How do I fix this

    I let my phone dry out in rice for over a week.  I see it turn on but the screen is black.  If you hold it to a light you can see the Apple logo.  How can I fix this?

    It depends which country you are from below is US
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

  • How can you start up your ipod if holding the hold and home button does not work?

    how can you start up your ipod if holding the hold and home button does not work?

    Remi,
    How long did you hold these buttons for? Did you try more than once?  Have you tried letting it charge for a bit and trying again?
    If nothing else, see this article for more troubleshooting assistance.
    http://support.apple.com/kb/TS2771
    B-rock

  • With new phone download, how do you close applications running in the background? Used to push hold and delete.

    With new ph download how do you close apps running. In the background

    Obviously you didn't search the forum prior to your post as there have been a lot of posters with the same question. Double tap on the home button as usual. Scroll left or right to select the app that you want to close and swipe upward to close it. The iPhone ios7 user guide is available online from Apple support and from the ibook store on your phone.

  • Content Holder How do you get css class to appear in the wysiwyg editor? The only option is "clear class".

    Need an answer to my question: How do you get css class to appear in the wysiwyg editor? The only option is "clear class".

    Liam,
    If it's not supported there, then where can I access the css and do you have any recommendations for a simple app to change the css style?

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • How can you get OS Lion back if you already downloaded Mavericks?  I CANNOT live with the battery life of 2 hours!!  HELP

    How can you get OS Lion back if you already downloaded Mavericks?  I CANNOT live with the battery life of 2 hours!!  HELP

    Kappy wrote:
    Don't downgrade OS X without first erasing the drive. You cannot restore a Time Machine backup of Lion directly on top of a later version of OS X such as Mountain Lion or Mavericks.
    When you "Restore from a Time Machine Backup.", the drive will be erased for you, but yes, won't hurt to:
    Boot into Recovery (hold ⌘R on boot)
    Utility->Disk Utility->Erase Macintosh HD, then Repair Macintosh HD
    Quit Disk Utility
    Then Select: Restore from a Time Machine Backup.

  • How do you grey out/disable fields under a radio button if another radio button is selected in Adobe Acrobat XI Pro?

    How do you grey out/disable fields under a radio button if another radio button is selected in Adobe Acrobat XI Pro?
    I’m creating a form where the user has three options to make a payment.
    1. charge to my credit card
    2. charge associated costs to bank account
    3. By cheque or money order
    My Problem is, under each option, there are required fields that has to be filled out. So if the user picks the first option, charge to my credit card, they would fill out the required fields (credit card number, expiration date etc.). But when they click submit button to submit the form, it won’t let them, because there are required fields under the second option. Also, I have the radio buttons for the three options setup so that if the user holds the shift key and clicks a radio button, it unchecks it. So what I'm trying to do is this: If the user selects the radio button for option 1, the other two options are greyed out/disabled. And if the user holds down the shift key and clicks radio button for option one again, it unchecks the radio button and the other two options are available again. Is there a way to grey out or disable the two other payment options when the other one is picked. I’m assuming I will have to use javascript, but what would the coding be and which field do I write it under?
    Thanks in advance guys

    You will have to use custom JavaScript to access the various properties of the field object.
    The radio button group has a value. When no button is selected that value is "Off". When an individual button has been selected the value for the group will be the option or export value for that individual button.
    Once you have determined the button selected, then you will know the form fields that need to be made required. You use JavaScript to access those fields and change the "read only" property to false, and set the "required" property to true. For the fields associated with the other options, those fields should be reset, made read only, and have the "required" property set to false.
    Disabling (graying-out) Form Fields
    >> Also, I have the radio buttons for the three options setup so that if the user holds the shift key and clicks a radio button, it unchecks it.
    Radio button in a PDF do not work that way. Only check boxes can be unchecked by clicking on one that has been checked.
    If you plan the coding for the Mouse UP action to test for all possible options and code for each of those options you should have what you want.
    If you want actual code you need to provide a lot more details.
    It is even possible to perform some credit card and bank routing number validations with JavaScript and some check digit formulas.

Maybe you are looking for

  • TitledBorder Text is Truncated

    Hello all, This must be a common problem. Here's a simple version of the problem: I have a JPanel using a FlowLayout. Within the JPanel I have a JLabel whose text is a single character in length. When I place a TitledBorder around the JPanel, the bor

  • Problem with ListSelector

    Hello everybody, I found an error in my code : GRAVE: "Servlet.service()" pour la servlet jsp a lanc� une exception java.lang.ArrayIndexOutOfBoundsException: 32         at com.sun.rave.web.ui.component.ListSelector.getValueAsStringArray(ListSelector.

  • I dropped my macbook pro retina, is it ok?

    Hello there, I'm so worried, a few minutes ago I was resting in my bed, and I didn't realize that my macbook pro 13 retina display was there, so I stretched my leg and I dropped my Macbook about 50 cm from my bed right to the floor. my computer fell

  • Post-Crash Recovery Question

    After a system crash, everything has been scrambled.  I'm now trying to rebuild it.  I'm still on PSE 4.0, so perhaps my setup is too primitive for my question -- but I'll try: It does appear that I have been able to salvage most of the Tag and Colle

  • Screen Sharing Failure from Admin 3.72 to Yosemite Clients 3.8

    My Yosemite classroom Macs have ARD Version 3.8. My Admin version is 3.72. I can do everything with the clients except share my screen, which I use every day for teaching and demonstrating. I discovered I can still share my screen with the remaining