How Do You Identify Logic board revisions for MDD FW800?

I have a logicboard, the CPU board, and the heatsink for a PowerMac G4 MDD FW800 DP 1.25 that I want to sell, but I can't figure out what Revision it is (A, B, C) or if it is 133MHz or 167MHz. I do not have the computer (bought for parts) they came from anymore but I have my own MDD FW800 DP1.25 I could consult. Logic boards, I'm discovfering, don't make for easy reading--can anyone assist or point me to a "Logic Boards 101" text?

Hi-
The following should help to ID the logic board.
For the FW800 1 ghz board, the part is identified by looking at the serial # ON THE BOARD.
Look for one of the following code combinations in the
last 4 digits of the serial # : NME,P2X,P3E,P3G,P3U,P7P,P8E,
PFD,PFF,PFG,PFT
This would be the 133mhz model.
For FW800 multi processor boards, the part is identified by looking at the serial # ON THE BOARD.
Look for one of the following code combinations in the
last 4 digits of the serial # : NMF,P2Y,P3F,P3H,P3V,P7Q,P8F,
PFE,PFH,PFJ,PFU
This would be the 167mhz model.
For the MDD 167mhz, rev A, look for one of the following code combinations in the
last 4 digits of the serial # MXJ,ND0,ND9,NE2,NE8,NEV,NEX,NFA,NFG,
NG1,NKT,NNR, NNS,NNW,NRC,NWK,P8S,PG2,PG3,PG4,PG5,PG6,PGI
For the MDD 133mhz, rev B, look for one of the following code combinations in the
last 4 digits of the serial # : NF9,NG1,NNR,NRC,PG7
For the MDD 167mhz, rev. C, to determine which 167 MHz logic board is installed in the computer, check the AirPort Card connector at the edge of the board.
If there is a 2-pin fan connector on both sides of the AirPort Card
connector, it is rev.C. Otherwise use rev. A.
Look for one of the following code combinations in the
last 4 digits of the serial # :MXJ,ND0,ND9,NE2,NE8,NEV,NEX,
NFA,NFG,NG1,NKT,NNR,NNS,NNW,NRC,NWK,P8S,PG2,PG3,
PG4,PG5,PG6,PGI
For further reference, check here:
http://www.mac-resource.com/store.php?cat=desktopparts-logicboards
G4 AGP(450)Sawtooth   Mac OS X (10.4.8)   2ghzPPC,1.62gbSDRAM, ATI9800, DVR-109,(IntHD)120&160,LaCie160,23"Cinema Display

Similar Messages

  • Identify logic board revision (without GPU issue)

    Hello!
    I am participant of this program https://www.apple.com/support/macbookpro-videoissues/
    Few days ago I've got from apple authorized service repaired macbook pro late 2011 md318 a1286.
    I have small reason to believe that its not new revision of logic board, just a board from other old macbook.
    How can I identify that this is new version of logic board without gpu issue.
    Thanks a lot.

    It doesn't look like brand new. May Apple send refurbished logic board to Authorized Service?

  • TS4088 why is there a limit on 3 years? it should be all the MacBook Pro mid 2010 with symptoms, there should get their logic board changed for free, mine mac is 3 month late and i had this problem for over a year, but i first saw this article today :(

    it should be all the MacBook Pro mid 2010 with symptoms, there should get their logic board changed for free, mine mac is 3 month late and i had this problem for over a year, but i first saw this article today

    Hey Clintonfrombirmingham
    I called Apple technical support in Denmark, but with no positive reply.
    She couldn't do anything, and said that They had sent a recall Email about the problem and with their offer to repair the Macbook Pro, but I'd never recieved an Email about the problem. She wasn't in power to make an exception. It can't be true that i paid a lot of money, for a product that can't barely stand on its own feets, Apple didn't tell me that the product I was about to buy, would restart every 5 minute. and now when  they know the problem, they wont repair it? it just don't make sense for me. If a car seller discovers that all the brakes in a car he had sold, will crash after some years he will call all the cars back to repair no mater what. i just don't understand how Apple will make good service for their custumers, by extending the warranty from 2 to 3 years, but wont take the computers there is a little bit to old, 4 months will make the difference. i can't believe it.
    What can i do now? 
    best regards Oskar

  • How do you install logic on the new imac if there is no disk drive?

    How do you install logic on the new imac if there is no disk drive?

    Dj Generator wrote:
    [There] must be other options, i would rather not spend £70 on a disk drive or £140 on the software again??
    Hmmm? A quick google search for external optical readers turns up many in the $20-$40 (USD) range. Didn't convert to £ or include any VAT charges, but you should be able to get something significantly cheaper than £70. That's your simplest solution.
    iMac refurb (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2

  • How do you use Logical Expressions in the RTF?

    How do you use logical expressions such as "and", "or" when you want to do conditional printing of XML data in the RTF?
    For example:
    if (conditionA and conditionB) then...
    Regards,
    Smita

    Thank you Sir! - I had something else wrong in the expression, but the error message I was getting was a bit misleading and sent me down the wrong path.
    Thanks again, and best regards:)

  • How do u find logical datanase exist for ur program requirement?

    How do u find logical datanase exist for ur program requirement?

    Hi,
    The transaction Code SE36 is where you can find all the Logical Database that exist in the SAP system. You can find the existing logical database that exist and can use which ever that suits your needs.
    Logical Databases are mostly used in HR ABAP and in HCM Reports.
    Thanks,
    Samantak.
    <b>Rewards points for useful answers.</b>

  • How can you change your security question for I tunes?

    How can you change your security question for I tunes?

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

  • How do you set up Port Forwarding for ARD 2.2 in AEB N?

    Help,
    I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
    How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
    I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
    Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
    Any and All help will be greatly appreciated.
    P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
    Thanks,
    Jim

    Try the following for each AirPort Extreme ...
    AEBSn - Port Mapping Setup
    To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
    1. Reserve a DHCP-provided IP address for the host device.
    Internet > DHCP tab
    o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
    o Description: <enter the desired description of the host device>
    o Reserve address by: MAC Address
    o Click Continue.
    o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
    o IPv4 Address: <enter the desired IP address>
    o Click Done.
    2. Setup Port Mapping on the AEBSn.
    Advanced > Port Mapping tab
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s): 3283
    o Public TCP Port(s): 3283
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s): 3283
    o Private TCP Port(s): 3283
    o Click "Continue"
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s):
    o Public TCP Port(s): 5900
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s):
    o Private TCP Port(s): 5900
    o Click "Continue"
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s):
    o Public TCP Port(s): 5988
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s):
    o Private TCP Port(s): 5988
    o Click "Continue"
    (ref: "Well Known" TCP and UDP ports used by Apple software products)

  • How do you change the Apple ID for my iPhone 4?

    How do you change the Apple ID for my iPhone 4. I am able to access my iTunes account using my new ID and password on my computer; however, my iphone has a different Apple ID and I do not have cannot access iTunes on this phone. 

    Also, if you have iCloud, you will probably also want to change the iCloud account on the phone to be yours:
    Settings>iCloud - if Account is not yours, go to the bottom and Delete Account. Then sign back on with your iCloud account info.
    Cheers,
    GB

  • How can you unlock a iphone4s sprint for a family member in russia?

    How can you unlock a iphone4s sprint for a family member in russia? i sold it to them but when they took it back to russia is locked them out as if someone has stolen the phone.

    Contact Sprint to see if they offer unlocking and if you qualify.
    Only the wireless carrier to which the iPhone is locked can unlock it.

  • How do you change the pink highlight for the present day in calendar when in week view

    How do you change the pink highlight for the present day in calendar when in week view - OSX Maverick

    the current day was light blue in ical in 10.6 but with plenty of contrast, but I recently made the bigger leap all the way to calendar in 10.9. the choice of color is terrible for reasons such as Spile1962 puts below, but also not having any way to tweak it is terrible. I'm on a bran d new imac and can barely see a difference and frankly, while I appreciate the subtlety, I still forget to look for the darker bar across the top of the current week and day. we should be able to adjust weekend and current day bg colors.
    I went into the app's package contents in hopes that they were using a tiff/png file that I could tweak on my own but couldn't find anything for them. all the icons are there, as are the bg sets for all the little pop-ups and things, but I couldn't even find a reference to a hex color in the plist file.
    send apple feedback. I just did myself, except that Calendar hasn't made the list (yet?), only iCal up to version 4.x, and Messages is still only iChat for feedback, and some others are old as well. apparently after steve died, apple's attention to these details just died with him. it's been that long since those other apps should have been relevant on their site.

  • How do you set the font color for a specific entire row inside a JTable?

    How do you set the font color for a specific entire row inside a JTable?
    I want to change the font color for only a couple of rows inside a JTable.
    I've seen some ways to possibly do this with an individual cell.
    Clarification on changing the font color in an individual cell would be helpful too if
    there is no easy way to do this for a row.

    hai,
    Try out with this piece of code.Create your table and assign the renderer to each column in the table.
    CellColorRenderer m_CellColorRenderer = new CellColorRenderer();
    for(int i=0;i<your_JTable.getColumnCount();i++)
    your_JTable.getColumnModel().getColumn(i).setCellRenderer(m_CellColorRenderer);
    class CellColorRenderer extends JLabel implements TableCellRenderer
    CellColorRenderer()     
    setOpaque(true);     
    setHorizontalAlignment(LEFT);
    setVerticalAlignment(CENTER);
    setBackground(Color.white);
    setForeground(Color.black);
    protected void setValue(Object value)
         setText((value == null) ? "" : value.toString());
    public Component getTableCellRendererComponent(JTable table,Object value,boolean isSelected, boolean hasFocus, int row,int column)
         if(isSelected == true)
              setForeground(Color.red);
         else
              setForeground(Color.black);
         setValue(value);
         return this;
    regards,
    bala

  • HT2404 how do you get your money back for software that does not perform as advertised?

    how do you get your money back for software that does not perform as advertised?  I purchased the batch coverter to watch .swf video which it states it supports, but it will not open the files and I want my money back!!!!!

    tell Apple.  http://www.apple.com/feedback/
    iTunes Store Terms and Conditions specifically states: All sales and rentals of products are final.

  • How do you find your account history for what you have purchased through iTunes?

    How do you find your account history for what you have purchased through Itunes.  I have purchased apps for my Iphone and music and want to see a listing of where my money went.  I use an itunes card so I can keep an idea on how much I have spent.
    Thanks.

    iTunes Store & Mac App Store: Seeing your purchase history and ...

  • How do you set the default magnification for Acrobat.  All documents that I open enlarge to 174% and are too big.

    How do you set the default magnification for Acrobat.  All documents that I open enlarge to 174% and are too big.  I see how to change the size after the document is open by going to File/properties/initial view and saving this setting.  I want all documents to open at 100% when they are first opened.  Can I set this as a default view?

    Hey Kris,
    You might go to Edit> Preferences> Zoom
    Do this without opening any particular PDF so that it applies to the program itself and not just one document.
    Try this and then let me know.
    Regards,
    Anubha

Maybe you are looking for

  • GET_DDL function

    Dear friends, I could not find the reason for below query is not executed for EMP table, whereas other tables are shown perfectly. SQL> select dbms_metadata.get_ddl('TABLE','EMP') from dual; ERROR: ORA-31603: object "EMP" of type TABLE not found in s

  • FF_5 Getting Error

    Hi BRS Experts, i am facing problem while upload txt file thru FF_5, see the screen shot below.. Kind regards pranav kr. Gupta

  • Mac suddenly very slow

    All of a sudden my mac started running very slow. first i opened activity-monitor to see what was wrong. I didnt see any unusual ram-usage. But the kernel_task had a CPU-time of 32 000. I cant seem to find any other explenation for why this is happen

  • How do I enable the timeline in Photoshop?

    I want to create an animation, but none of the controls on my animation timeline are activated. What do I need to do to enable the timeline controls?

  • Creating PDF in Javascript in Adobe DC?

    Hi, Just wondering if anybody knows if creating a PDF in Javascript will get any easier in Adobe DC? I need to generate a report in Javascript. - The Report object doesn't give me enough control over formatting. - external data objects don't allow me