How do you install a patch file?

Hey all, this is going to sound very dumb, and I don't really know which forum this question fits into.
I've got a xxx.patch file to be installed for a project tht is written in Java, I am running Windows XP and am using Eclipse as my IDE. I've never in my life installed a patch file and there is no installation guide for the patch file at all. What exactly do I do to install it?
Thanks for help!

patch file are just diff result of a original file.
See http://www.cpqlinux.com/patch.html
Not sure where to get a Window's port of patch program though.
Your project who released the patch should have more info on which orig file it's generated from and etc. If they used Subversion, I believe there is a subcommand you can use. Again you need to more info from where you get the patch.

Similar Messages

  • How do you install a sound font (.sf2) onto Garageband 10?

    I've been looking all over the place to figure this out, but I've found nothing. How do you install a .sf2 file onto garageband 10? I used to be able to install it using the DLS music device, but as far as I know, that's not in Garageband 10.

    I am seeing the DSL music device in the Audio Units section of the Smart Controls. But maybe it is a left-over from GarageBand 11.
    Open the Smart Controlds and click the Audio Units > Instrument brick.
    Then select "Au Instruments > Apple".
    But I did not check, if soundfonts still will work this way. Tell us, when you try.
    Regards
    Léonie
    I nearly forgot - if you have not already done so, you need to enable the Audio Units in the GarageBand Preferences, in the Audio/Midi brick, Effects:

  • How do you install Camera Raw 8.3 to CS5 photoshop so I can open files ?

    How do you install Camera Raw 8.3 to CS5 photoshop so I can open files? Thanks

    CS5 does not support ACR 8.5, it only goes as far as 6.7.
    You will need to convert your raw files to DNG format with the free converter. http://helpx.adobe.com/photoshop/digital-negative.html

  • How do you install the JDBC-OCI patch for a Windows NT4 IFS Installation?

    I am about to install IFS on a Windows NT4 Server. I dont understand the instructions for installing the JDBC-OCI patch.
    How do you install the JDBC-OCI drivers?
    Do I install them after installing Oracle 8.1.6? and before installing IFS?
    Is it necessary to install them?
    I would be grateful for as much help as possible, I have never done anything like this before.
    [email protected]

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Jaikishan Tada, Oracle Support:
    Before installing iFS, you need to install
    Oracle8i Client (with Administrator option).
    This installs JDBC-OCI driver and other
    common Oracle components such as Net8,
    OEM ....
    The JDBC-OCI driver patch is available from
    technet to download. Go to the url - http://technet.oracle.com/software/tech/java/sqlj_jdbc/software_index.htm
    and download Oracle8i 8.1.6.0.1 JDBC Drivers for use with JDK 1.1.x.
    Apply the patch and carry out iFS installation/configuration.
    Go through the iFS installation guide.
    Good Luck,<HR></BLOCKQUOTE>
    null

  • HT1926 My installation of Itunes to syne my iphone with PC was missing AppleApplicationSupport.msi  after 2 installs how can I install such a file do you have a path for this

    My installation of Itunes to syne my iphone with PC was missing AppleApplicationSupport.msi  after 2 installs how can I install such a file do you have a path for this

    Hi kensb!
    I would recommend that you attempt to reinstall all of the programs and components of iTunes on your machine and reinstall everything again. It can be tricky to get everything uninstalled, so we have an article that can help you make sure you uninstall everything:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/ht1925
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/ht1923
    Specifically, when it comes to uninstalling, you will want to uninstall applications in this order:
    Use the Control Panel to uninstall iTunes and related software components in the following order. Then, restart your computer.
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended effects.
    You will then want to follow the links in those articles to download the latest package of iTunes software for your computer and install again from there. Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • HT1338 how do you install adobe flash player?

    How do you install, not just download, adobe flash player?

    Download the installer, double click on the .dmg file, then double click on "Install Adobe Flash Player."

  • How do you install mountain lion on all your macs in the household using one 20 dollar license?

    how do you install mountain lion on all your macs in the houshold with the same license (you only pay 20 bucks for all your macs) is that right?

    As long as they're all logged into the Mac App store with the same Apple ID, you can re-download the installer to all the Macs.
    Or you can save a copy of the installer file before you run it and use that to update the other Macs. The ML installer file will appear in your Applications folder when it's done downloading. Copy it to another location (don't move it).
    If you don't copy it before you upgrade, it will disappear when ML is finished installing.

  • How do you install elements 11 after downloading it?

    how do you install elements 11 after downloading it?  I am running windows 8, it ask me what app I want to use and sends me to the Windows ap store

    you need to download both the exe (smaller file) and the 7z (larger file).  put both in the same directory and then click the exe.

  • How do you install the "add-in" on adobe connect?

    How do you install the "add-in" on adobe connect?

    Either do so when prompted in the Meeting room if you join as a Presenter or Host, or when you attempt to share your screen, or from the test your computer page for Connect, or by downloading an running the executable file.

  • How do you install 3rd party plug-in in Photoshop CC

    Our fine customer service/tech support wouldn't help me with my question/problem because 3rd party plug-ins are not an Adobe product.... Silly, isn't it since all I want to know is how do you install "any" plug-ins into Adobe Photoshop CC. Can anyone with any sanity here offer a solution?
    Thanks.

    It could be complex depending on your OS and user ID permissions.    Adobe Photoshop CC Mac version only supports new Mac with Intel 64bit processors, Photoshop CC windows supports  both 64 bit systems and 32 bit systems.  If you have a 64 bit system both the 32 bit and 64 bit version of Photoshop are installed so windows has both a 32 bit Plug-in Folder and a 64 Bit Plug-in Folder.  Prior to CC Photoshop Preference let you add you own Plug-in folder tree to Photoshop Plug-in folder tree.   I still install Plug-in that way however I have to add the link manually for adobe removed that option from its Preferences UI in Photoshop CC.  I always have more the one versions of Photoshop and all installed versions use the same Plug-in, Actions and Scripts that I add to Photoshop.   There is One exception.  The Way the Image Processor Pro plug-in script is coded expects it and it default XML file to be installed into Adobe's folder so I made and exception for it.   You user ID need to have permission to modify and add files to system folders if you want to install plug-ins into the folders that Adobe created for third party plug-ins to be installed into.
    Adobe Photoshop CC installer creates a folder in  Photoshop version   ...\Plug-ins\... so on my Window 7 64 bit system there are two folders
    "C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\" and
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CC\Plug-ins\"
    All I add to these are the Adobe ScriptListener.8li Plug-in and a link to my  Plug-ins folder.

  • How do you install a Digital ID Certificate for use on iPod Touch?

    On my iPod Touch there is a button to turn on s/mime under settings, mail/calender, accounts, advanced but it says there are no certificates installed.  So, if you had a certificate from a COA how would you install it on the iPod Touch?  I have heard of configuration profile utility for the iPhone but isn't that for companies or buisnesses to use?
    Thank you for any helpful information.

    Hi,
    One way is to email your cert to yourself; another is to use cloud-based storage (e.g., Dropbox) that allows you to reference files via URL. In either case, once the file is selected it will be recognized as a digital certificate and you will be asked if you want to install it.
    Hope this helps.

  • How do you install a preset (FX brushes) to elements 11 that is downloaded to your hard drive

    How do you install presets to elements 11 (FX brushes) that are downloaded to the hard drive

    Use Edit->Preset Manager to load your brushes file. Here is help link to help you with the same - http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1f71abaa0b12e28aec742- 7fd2.html#WS287f927bd30d4b1f71abaa0b12e28aec742-7fce

  • How do you install Lightroom 4 to a PC with 3 installed

    How do you install Lightroom 4 from the cloud, to a computer with 3 installed, and currently being used with projects in process. I do not wnat to lose the setting or the files.

    The LR4 installer doesn't care for your LR3. It will leave everything in place. You will only be asked whether you want to import the catalogs at some point.
    Mylenium

  • How do you convert a webarchive file so it can be run on a PC?

    How do you convert a webarchive file so it can be run on a Windows PC?

    Save the page as PDF instead. Most Windows users have a PDF reader installed.
    File > Export as PDF

  • How do you unzip a Word File on an older MAC mini?

    How do you unzip a Word File on an older MAC mini?

    On older Macs .docx files can look like a zip file. This is because they contain a proprietary form of XML compressed using ZIP.
    If you have an older version of Office for Mac, i.e. Office 2004 which predates .docx format files, then you can install a free addon to allow it to import and export .docx files.
    See http://www.microsoft.com/en-us/download/details.aspx?id=27334

Maybe you are looking for

  • Error in installing CC&B 2.3.1 SP2

    Hi, I have CC&B 2.3.1 SP1 in my windows machine with Tomcat Server. I am trying to install SP2 but getting some error if i select some person or something in the control central. Installation didn't show up any error and server is staring up fine. Pr

  • ITunes and PC with Windows 7 will not recognize my iPod....

    however iPod still works fine on an XP machine.  Our iPad is also working fine on the Windows 7 machine, including in iTunes.  The Windows 7 machine says the disk needs to be reformatted whenever I plugin the iPod. I have tried all of the possible fi

  • How create a purchase order without imputation using bapi: BAPI_PO_CREATE1

    Hello Forum I have an request for purchase order with imputation K (cost center, EBAN-KNTTP). During the liberation of the request for purchase order, and using the Bapi: BAPI_PO_CREATE1, I want to create a Purchase Order without imputation (imputati

  • Using AIM with ichat

    Im trying to use AIM through Ichat and it doesn't seem to be working? can i just install AIM and use it with the Ichat, because that isnt working either...i tried installing aim and when I double click it I get an error msg or it tries to open in Exc

  • Missing Method Signature In Stack Dump (Java 1.4)

    I am looking for a way the get the signature of the methods in the call stack. Currently the printStackTrace() or getStackTrace() only allows me to see the method names and not the number of arguments and argument types. How can I get access to these