How do you install OS after Hard Drive upgrade? Thinkpad T41p

I have a Thinkpad T41p with Window XP Pro on it.  I have a new larger hard drive for it, but I do not know how I will be able to install the OS on the new drive.  The laptop came with the OS already installed on it.  That will to be the case, of course, for the new hard drive.  So what do I do?  If you could point me to a step-by-step procedure, I would be most grateful.  I have installed numerous OSs, so I am familiar with how to do that from installation CDs. 
Thanks in advance for the help.
GKent

Just went through this process on my wife's T41. I did the following:
downloaded and installed the eval copy of Active@ Disk Image and Active@ Boot Disk (created a boot CD).
rebooted to the BIOS setup and in the security setting for the IBM Predesktop Area I selected Disable saved the changes and booted
rebooted to windows and usedActive@ Disk Image to create a raw image of the entire disk to a USB hard drive
Shut down and removed the original hard drive and installed the new empty hard drive
rebooted using the CD created by Active@ Book Disk and started the Active@ Disk Image utility
selected the Image to Disk option. This took the raw image and installed it on the new hard drive (this included the hidden partition as well as the windows partition
rebooted without the boot cd and logged in to windows
rebooted into the BIOS and reset the security setting for the IBM Predesktop Area to Normal, saved changes and booted
result is the same size partitions as before on the new 80 GB hard drive so I then ran Partition Magic to resize the Windows partition to utilize all of the remaining space on the disk (left the hidden partion in place - it is still bootable)
rebooted and I now have a 74.5 GB drive for windows with all of the installed software intact
I did plan on using the recovery option to reinstall the image to the factory settings since I had a few issues with windows on the original drive. Ran Rescue and Recovery and it could not find the restore images After much searching it appears that I will have to go out and buy the CDs (unless someone has a free download option)
Tex
(Had two steps out of order - ugg) 
Message Edited by Tex on 12-01-2008 09:52 AM

Similar Messages

  • How do i install an external hard drive to my powerbook G4?

    how do i install an external hard drive to my powerbook G4?

    Buy an external FireWire drive (and FireWire cable if you don't have a spare or the drive doesn't come with one). Then, just plug it in. Not much for installing.
    If you mean replacing your internal drive, that's another matter entirely.

  • HT201250 How do you add an external Hard drive to time machine and share on network?

    How do you add an external Hard drive to time capsule and share it on local network?
    Lee

    Ensure it's formatted as Mac OS Extended, FAT16, or FAT32, connect it to a self-powered hub, and plug it into the Time Capsule's USB port. If the drive is Ethernet and not USB, ignore everything else and just plug it in.
    (71787)

  • How do you tell the free hard drive space on macbook pro 10.6.8

    how do you tell the free hard drive space on macbook pro 10.6.8

    Open Activity Monitor and look at the drive space info
    see graphic here
    Why is my computer slow?

  • How do I reinstall my operating system after hard drive upgrade on MacBook pro?  I have Snow Leopard install disc

    How do I reinstall my operating system (Snow Leopard) after a hard drive upgrade. I did a Time Machine backup before the new hard drive was installed. I put in the Snow Leopard install disc and don't get the icon I'm supposed to double click to install Snow Leopard and then the backup.
    HELP PLEASE!!

    Is the new HHD in the MBP?
    Is the new HDD formatted Mac OS Extended (Journaled)?
    Where is the old HDD? In an enclosure?  What is on the old HDD, your user data?  Is the Snow Leopard System on it?
    Do you have a separate Time Machine Disk with your user data?
    Answers to these questions should give an exact status of your situation so that one can proceed in the right direction.
    Ciao.

  • What are the steps to follow after you install a new Hard Drive on a 17in Macbook Pro mid 2009

    I plan on installing a larger Hard Drive..the physical part is simple..but what are the steps after you close it up and hit the power button? Is there softwre on the mother board that will start the unit running??

    A new Hard drive will not be Mac-formatted, so you will have to do that first. A copy of Disk Utility to do the job is also on the 10.6 Installer/Utilities DVD.
    Boot to the installer DVD, but do not Install. Answer only the "what language" question, and wait a quarter minute for the menuBar to be drawn. Choose Disk Utility from the Utilities menu that appears.
    Select the Hardware_name of the new Drive. Partition, one partition, ( Options ), GUID partition table. Name the partition: MacIntosh HD and choose Format: Mac OS X Extended (journaled). It will complete in a minute or two, as it only rewrite the Directory area.
    If you wish to shake out your drive, you can erase it and Security Erase, Zero all data, one pass. But this takes HOURS.

  • How do i install a new hard drive using time machine

    Hi there
    I have purchased a new 1TB hard drive for my Mac book pro (late 2008) model. I have time machine installaed on a seperate hard drive connected with an airport base station. I do not have the orginal snow leapoard/mountain lion OS CD or DVD. Can someone please tell me the exact steps to install the new hard drive .
    Thanks

    You haven't inserted your new hard drive yet?.
    There's two ways
    1. install yourself
    2. or pay someone to install it for you.
    If you want to do it yourself go to google and type in "install new hard drive for macbook pro". sometimes it makes a difference what model your macbook which is why i won't provide you a link just in case its the wrong one.
    Its very easy.
    1. remove all screws and the lid.
    2. remove screws from the black bracket which is holding your hard drive in place.
    3. unplug your hard drive.
    4. VERY IMPORTANT (A MISTAKE I MADE). make sure that you remove the external screws from your original hard drive as these screws are the one thing that hold and stabilise your hard drive and stop movement from happening.
    5. insert these external screws to your new hard drive (there are four screws)
    6. insert and plug your new hard drive.
    7. screw the black bracket in firmly
    8. attach lid and insert all screws firmly.

  • Can you install a second hard drive on a Touchsmart320-1130 PC?

    This question was solved.
    View Solution.

    Here are the specs for your HP TouchSmart 320-1130a Desktop Computer. No, you can't install a second hard drive in this computer. The HP TouchSmart and All-in-One computers have more in common with laptops than they do with desktops.
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How do you dump a external hard drive from PC to mac

    How do i dump my external hard drive from a PC to my Mac

    If you don't see the external HD when you connect it to the Mac, then you need to use Disk Utility to format the XHD to a FAT32 drive. Once done it will read on the Mac and PC without any problems.

  • How to reinstall OS after hard drive upgrade?

    I Just installed a new hard drive and RAM on my MacBook 2010 white. I have the original OS disc but don't know how to install it (no instruction booklet). Any tips on what to do? Please and thanks

    Thanks Niel. I was able to get it running but then it did not recognize my new drive (Crucial MX200 SSD). Apparently it's not initialized and I was told I have to remove it, connect it to an outside source with an OS and format it that way. I may have to return it to MicroCenter but I don't want to drive back there. Any suggestions or is that my only course of action? Thoughts?

  • Do I have to re-do BootCamp after hard drive upgrade?

    I currently have an early-2011 MacBook Pro with 500GB storage. I ran BootCamp and now have a partitioned hd with 300GB on my OSX side and 200GB on my Windows side. I'm running out of space and want to upgrade my hd to a 1TB hd and was wondering if the ratio of storage space would be the same after the upgrade or if I would have to re-do BootCamp and re-install Windows. I have been backing up my computer on an external hd and would be able to go back to the way it was before I ran partitioned it, and since only games are on the Windows side (mostly through Steam), it wouldn't be too hard to start from scratch and re-install the games. So basically this is what I'm asking: after upgrading my hd from 500GB to 1TB, will I have to do BootCamp all over again or will I be able to choose how much space I put on each side of the partition?

    There is a surprising amount of misinformation about this topic. I don't know whether the people who make Winclone are to blame, but if you look right across the internet you'd be forgiven for coming to the conclusion that the only way to move, restore or resize your bootcamp petition is to use paid software. This is simply not true. If you're willing to spend some time and follow a couple more steps, it's easy to install a new hard drive, and put both your OSX and WIN7 partitions back precisely as they were (or resize as you please) without using anything other than freely available utilities.
    The way I've come up with uses a 160GB Maxtor USB drive and a DMG image of your bootcamp partition stored on a networked computer. I intended to write these up with screenshots at some point. But for now here are my unedited notes.
    1 - use a utility called SuperDuper to create a bootable exact copy of your OSX partition - this is where the Maxtor external drive was used. One of the beauties of Apple OS - you can boot from a portable drive...
    2 - Use the Disk Utility (Applications - Utilities) to create a DMG of your bootcamp partition - move this to a networked computer
    3 - Create a bootable CD of the partition management program "GParted" by downloading and burning an ISO from their website.
    Next step depends on what you want to achieve - this assumes you're installing a new drive.
    4 - Install your new hard drive - plenty of videos around on how to do this, not hard.
    5 - Plug in the drive that you used to create a backup of the MAC OS and hold down option when turning on - boot from the external drive
    6 - Using the disk utility, create two partitions on your brnad new internal HD. Size doesn't really matter at this stage - just so long as one is big enough to fit the MAC OS
    7 - Using SuperDuper copy your MAC OS back onto the first of the new partitions
    8 - Before you restart, restore the DMG image you've stored on a networked computer (Images-scan for restore) to the second partition. It's important that you are still running off the external drive when you do this as otherwise you'll get a "resource busy" error when you try to restore.
    9 - Shutdown. Turn on holding down option. Fire up the GParted disk you made early. It's an ugly interface, but gets the job done. Just accept the default settings when asked questions when starting up.
    10 - Using Gparted delete any extra partitions that have may have crept in (I had a FAT32 200MB partition that was causing issues) - what you should have is only two partitions the HFS and the NTFS partitions. You can resize these to whatever you feel like. This may take some time. Moving partitions around on a 750GB new drive took about 4 hours. Shutdown and unplug everything.
    11 -  Turn on and hold option. Select the Mac OS hard drive and your OSX will start. At this stage you won't be able to boot into Windows - that comes in a moment.
    12 - Download and install ReFit. Go into system preferences-startup disk and and make sure that the Mac OS is selected. Restart twice. Twice is important - that's when you should be greeted with the ReFit screen when you restart the second time.
    13 - On the refit menu, select the option to the right of the command prompt icon (the partition tool) - it will ask you if it can sync the Mac boot table with the Win boot table (something like adding the MBR to the boot schedule) - say yes. It takes less than a second.
    14 - Restart - and again hold option. Grab your original Windows installation CD and boot into it. Select your region and then go to "Repair your computer". Ignore the message about being able to fix and restart (choose No). Then choose Startup Repair. It'll do its thing. You can then restart.
    15 - You should now have a working OSX and Bootcamp drive on your new hard drive - exactly as it was on the old one. Without dropping a cent on software and a great sense of achievement.

  • Spinning beach ball after hard drive upgrade

    Im running a macbook pro i7 2.2ghz  8gb ram  version 10.6.8 SL
    I recently upgraded my 128gb ssd to a 512gb ssd drive.  I cloned the drive to new drive and ever since then, I get the spinning beach ball very often whereas I never got it prior to the hard drive upgrade.  Is there anything I can check or do to eliminate the freeze ups?  It is VERY annoying.  Or do I just need to do a fresh install on the new hard drive.
    thanks in advance

    Did you properly prep the drive first:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • IPod sync problems after hard-drive upgrade/change

    Hello all,
    Can anyone PLEASE help?
    I have just had my hard drive upgraded/changed from the original 640GB drive to a new 2TB drive. I've also had an additional 4GB of RAM added to now give me 8GB RAM.
    Absolutely everything else seems to be working fine (unusual for me and I'm often at the end of bad luck in such circumstances). The only thing I'm having problems with is syncing my iPod Classic with iTunes. Incidentally, I have the latest version of iTunes and my iPod software was up to date  the last time I checked.
    Before I go further, my system specs are:
    iMac
    24-inch, Early 2009
    Processor  2.66 GHz Intel Core 2 Duo
    Memory  8 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 9400 256 MB
    Software  OS X Mountain Lion 10.8.2 (12C60)
    When  I connect my iPod Classic, the iPod screen initially shows  'Synchronisation in progress' (or whetver similar wording it actually  is)... but this is just very briefly. It then indicates "Connected", and  that's the way it stays and doesn't change at all.
    It takes time to actually show up in iTunes, and when it does, I now have to very quickly click the iPod button (to bring up the iPod screen on iTunes) before the pointer turns into the spinning beach ball.
    Now, it hangs... and hangs... and hangs... and hangs.
    During this, I notice that "Manually manage music and videos" is ticked (which I didn't have ticked before), and also 'Enable disc use' is also ticked, although greyed out.
    Occasionally, the spinning beach ball will disappear and the pointer will return, but this is very very briefly and I have a split-second to try unticking - first - the "Manually manage music and videos" box and then - later, if I'm lucky - untick the 'Enable disc use' box. However, on the odd occasion I've managed this, I haven't been able to go further except for two occasions when I managed to click "Apply". The iPoid on those to occasions started to update... but went nowhere... it just did nothing.
    When the thing finally just hangs and hangs, I eventually have to 'force quit' iTunes and unplug the iPod without first ejecting. There was one other occasion when I managed to - split-second when the spinning beach ball disappeared - to click "eject" and the iPod succesfully did so.
    There were a couple of occasions in the past when I had trouble with my iPhone and was told to delete/trash the iPhone photo cache folder. Remembering this, I tried this for the iPod (iPod photo cache) and it made no difference... same situation.
    I did notice on one occasion at the beginning of all this that when I managed to unplug my iPod from iTunes, all the album covers were missing from the iPod (although still in iTunes). This was long before I tried deleting the iPod photo cache folder though.
    Any help would be greatly appreciated.
    Best regards
    BionicDan

    First things first the spinning beach ball is usually an indication that Search is going nuts.
    Turn off Search entire Library by clicking on the downward pointing arrow to the right of the Magnisying glass and untick Search entire library.
    Is your music still in iTunes on your new hard drive or is it only on your ipod?
    If it is in your itunes then you should be able to plug in the iPod and uncheck Manually Manage music and sync
    If the music is only on the ipod connect up as above click on the device and Drag all the music from your device to the library. then you can uncheck manually manage music and sync as normal

  • How to reinstall pre-installed iWorks after hard drive replaced?

    iWork was pre-installed on my iMac (July 2010) 3.2 gHz i3 running OS10.6.8. The original hard drive was recalled by Apple and replaced. I backed up all data to Crash Plan prior to the change out. When I tried to open any of the iWorks programs I received the following error message:
    I checked my install discs and application install discs, but iWork does not show up there. How can reinstall these programs?

    Thanks, mate, but the computer did not come with any iWork DVD. It only had the OS install disc and the Application restore disc, neither of which contain iWork. The error message reads: "Pages cannot be opened because of a problem. Check with the developer to make sure Pages works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X. Clic Report to see more detailed information and send a report to Apple."
    I sent a report to Apple. This message repeats for Pages, Numbers, and Keynote. My original receipt shows the iWork app was paid for.

  • How do I re-install Acrobat after hard drive has been replaced?

    I purchased and installed Acrobat XI in June. Shortly after this the hard drive on my laptop needed to be replaced and I now need to reinstall. Can I do this using the original code, as if installing a new product, or do I need to do something different? Please advise

    Yes, simply use the original installer and serial.
    Mylenium

Maybe you are looking for