How do you know if my iPod is from the second gen?

hello I would like to know if my iPod is an second generation Ipod is:), but i realy don't know how to know it.
And wat can you do when you update your iPod

The second gen iPod has the hard drive capacity (4GB or 6GB) stated on the rear of the case. The icons on the clickwheel are the same colour as the iPod. It wasn't supplied with a power adaptor.
Updating the iPod puts the latest version iPod software on it. However the most recent updater didn't add anything new for the iPod.

Similar Messages

  • Can you have multiple Apple TV's in the same house and network? If so how do you know which one to pick from your Idevice?

    can you have multiple Apple TV's in the same house and network? If so how do you know which one to pick from your Idevice?

    Yes, there are even defaults for naming them, such as LivingRoom, Bedroom, etc, or you can even enter your own name with the remote for each AppleTV.

  • How can you start up your ipod if holding the hold and home button does not work?

    how can you start up your ipod if holding the hold and home button does not work?

    Remi,
    How long did you hold these buttons for? Did you try more than once?  Have you tried letting it charge for a bit and trying again?
    If nothing else, see this article for more troubleshooting assistance.
    http://support.apple.com/kb/TS2771
    B-rock

  • Background noise removal takes about 3 seconds into each clip in timeline to kick in, so each clip has noise in the first few seconds.  How do you get this to remove noise from the very start of the clip?

    Background noise removal takes about 3 seconds into each clip in timeline to kick in, so each clip has noise in the first few seconds.  How do you get this to remove noise from the very start of the clip?

    insert a 5 second gap in the beginning of the timeline.

  • HT4914 How can you tell which songs are downloaded from the cloud on an ipad

    How can you tell which songs are downloaded on the iPad from the cloud?

    I know ipad albums are more like tagging photos rather than putting them in folders. I just have a nagging feeling I missed some pics and I have too many to try to go figure out one by one. I don't look at my photos from the camera roll, only from albums I tagged just because I imported photos from different sources and the dates and order is really messed up. I just want to know that I am viewing all the photos from like this vacation or that event and there's none I missed that are only in the camera roll.

  • How do you get a table to flow onto the second page?

    Since upgrading to Yosemite, I cannot figure out how to get my table to continue on to the second page. If you look at my screenshot, you can see that my table was so big so the whole thing was moved to the next page. I want it to remain on the 1st page and have additional rows continue on to the second page. In the previous version of pages, the column titles would also appear on the second page. Thank you very much for your help.

    Hi F.AD.;
    Go to View > Show Invisibles (Shift+Command+I).
    This will display Paragraph marks (¶) at the end of each paragraph.
    Delete the paragraph mark (¶) that is at the end of the paragraph before the table, i.e. just between the table and the paragraph.
    This will bring the table surely just beneath the paragraph (text), I suppose.
    Hi BePositive26;
    You didn't mention whether my suggestion made easy to solve your problem.
    Regards,

  • How can you tell if an iPod touch has the new apps?

    Having seen the updates to the ipod Touch I'm finally ready to buy one. From the keynote I gather that new units shipping from the factory after 15 Jan have the new software, old units do not and, unusually for apple, even if you buy an old software unit after the announcement, you don't get the software for free. Worse still, I'm in one of those countries they sell the touch, but don't have an iTunes store, so if I buy an old one, I'm stuck with it, cannot upgrade.
    Is there any way to tell from the box which version you have, change in part number, anything? I'm sure they aren't doing the M$ sticker approach "now with 1.1.3 and lots of new apps". The return policy out here in Singapore is basically you can't, so I need to figure out in the store if the box I'm buying is new, or old, and I have no clue at all how much stock is left out there.
    Any suggestions?

    Hello, 
    If you're going to buy in a real shop then why not have the retailer open the box for you. Especially if they don't do returns - that's a must.
    The next suggestion is a little more hit-and-miss but the fourth and fifth digits of the Serial Number are the week of production. If you get a week 02 or later it should be okay. Perhaps someone with a brand new one could confirm.
    mrtotes

  • HT2471 i want to add  verbatum external hard drive.  I think  connected it and the grren light came on, something fell and it got disconnected.  I restarted  but how do you know if it's working?  the green light is on and sometimes flashes, the instructio

    I have an external hard drive that I used with my mini mac.  I want to use it on my MacBookPro.  I plugged it in found it on my computer, it flashes seemed okay until it tipped over and came unplugged to  the computer.  I set it back up turned it on and the grren light sometimes flashes.  I read an article that said I needed to format the drive, I followed instructions and did that.  I will download tomorrow my pictures.
    Question
    How do I know if this is working
    does it record everything on your computer?
    How do I see what is there?  on the drive
    confused please direct me to help
    thanks
    kathy

    it may be very basic but I still don't get it,   the instructions are basic too so I'm sure I'm missing some thing here.i don't know how to copy  data and copy it back
    I don't see any indicaters  to do so.  I'll try again, , it's on a laptop and I don't want it connected all the time, just to secure some images.
    how  do i copyu...
    maybe I'll try a 'zip' drive instead?? But I don't understand them either, hard to be a dunce.
    and by the way, my computer has been freezing up on me lately had to turn it off and on, what have i done to it!!
    I just connected it again and it shows as a number22but nothing happens when I click on it...shouldn't something happen here? It seems to be empty as well as it should since I followed instructions on formatting.  so what now? 
    This is trying your patience I'm sure,you may just forget about helping me I just don't have a clue
    but  if you can help, I am listening.

  • HT1459 How do you find a lost iPod touch with the serial number?

    How do you find it with only the serial number ??0:

    The serial # will only help you if you think you have found the iPod. You  can compare your serial number to the # on the iPod. Other than that, the serial number won't assist you in finding it any other way.

  • How to search ebooks in iTunes if I only know ISBN of one book? How could I know its iTunes book'ID from the isbn?

    Dear community members,
    I'm new here. I have a question about searching ebooks in itunes search API.
    If I know ISBN of one book, either 10-digit ISBN or 13-digit ISBN, how could I know its ebook ID in itunes store?
    In other words, is there any rule that I could convert regular ISBNs to ebook IDs? Or where I could find the reference?
    Thank you.

    Try searching Amazon or Barnes & Noble or your local library, if they have an online search, for the ISBN. That will give you the title of the book so you can then search the iBooks store. Or just buy the book from Amazon or B&N as a Kindle or Nook book; both have viewers for Windows and Mac as well as iOS devices.
    Regards.

  • How do you copy and paste a photo from the internet without a mouse?

    Does anyone know how to copy and paste a photo from the internet without a mouse?  I would appreciate a response asap.  Thanks.

    http://support.apple.com/kb/HT2477
    Pointing, clicking, and getting around
    When you move your mouse or finger on a trackpad, you control a pointer (also known as a cursor) that moves across your screen. The pointer allows you to select and interact with the various items on your screen, including selecting files, clicking buttons, dragging sliders, and so on. Sometimes the pointer may look like a hand, a crosshair, an I-beam, or another icon, depending on what you're doing and the application you're using.
    For example, if you're using Safari to view this webpage and move the pointer across it, notice that it turns into an I-beam when you move it over text or a text field. When you see this, you can usually interact with the text or field below it. When you move the pointer over a button or link, the pointer turns into a hand, letting you know that you can click on the item.
    Depending on what you're doing and what application you're using, your pointer (far left) may change appearances
    Clicking your mouse button or trackpad button once allows you to select the item that your pointer is on. In other words, if your pointer is on a file's icon, clicking once will select it. If the pointer is on a button or link, clicking once will activate it. If your pointer is on a text field, clicking once highlights the field and allows you to start typing text in it.
    If you want to open a file, folder, or application, click your mouse button or trackpad twice. This is known as double-clicking. In general, you'll need to double-click items if you want to open them from a Finder window or the desktop. The exception to this is opening stuff from the Dock—just click once on an icon in the Dock to open it.

  • How do you configure a client to update from the server

    I found the information on how to point clients to a software update server but the problem I have is the URL.
    The example is http://su.example.com:8088/index.sucatalog
    I don't have a URL as far as I know and if I did, is the default port 8088 or where can I change or check that?
    And where is a list of the catalog file for the specific versions of OS X?
    Basically I have 8 Macs all running Yosemite except for one running 10.8.5. Instead of all the machines hitting the internet for updates, I'd like just my server to down the updates and then all clients update from the server.
    If there is better instructions on how to do this, please point the way.
    TIA
    Chris

    John Lockwood wrote:
    This does mean you need to buy a DNS load balancer to do this. The Mac itself cannot.
    FWIW, OS X Server is capable of performing round-robin access with the inbound traffic using multiple IP addresses for a single host name.  The addresses are each of the software update servers in your server pool.
    This'll toss errors for some translations when one of the servers is down — you can tweak the definition if one of the servers is going to be offline for a while — but some of the updates will get through.
    Set the DNS TTL fairly short — probably somewhere between a few minutes and an hour — to allow the DNS translations to be changed fairly quickly, if your software update servers are prone to outages.

  • If you sell an old Apple device to a stranger, how do you remove all your personal info from the device?

    If you sell your iPad 2 to a stranger, how do you remove all your personal info off of the device?  I removed all apps and photos, but I want to wipe it clean

    What to do before selling or giving away your iPhone, iPad, or iPod touch

  • How do you get your photos, apps etc. from the iCloud after your iPhone 5 has been set up at the AT

    How do you your get your apps, photos, etc,  from iCloud after your iPhone 5 has been set up at the AT&T store?

    http://support.apple.com/kb/HT4859

  • How do I know if I'm disconnected from the internet?

    I just got the palm centro 2 days ago and I was playing around with it and accidently signed into yahoo email. The green arrows appeared and I closed my phone immediately because I don't have a data plan but now, the black arrow is there. What does the black arrow mean and how do I get rid of it? Am I still connected? I read other threads about similar problems but I don't really understand. Where do I find the preference application?
    Please help!
    Thanks in advance!
    Post relates to: Centro (AT&T)

    Hello and thank you for using the Palm Help Forums!
    I would remove the battery and then reinsert it. This is a soft reset. This should disconnect you from the internet. Also as long as the arrows aren't moving you shouldn't be charged. The way wireless carriers usually charge for data is $0.01 per kb for download. Charges may vary per carrier but that is approx. You should only be charged when you are downloading, yes this includes surfing. You download a webpage before being able to look at it. It's usually not much data but not having a data plan and using web adds up QUICK!
    Hopefully this helps. Worse comes to worse, when you get your bill and if you have a decent amount of data charges I'm sure you can plea with you carrier that it was an accident and if they could credit you.
    -Pat
    Post relates to: Treo 800w (Sprint)

Maybe you are looking for