How do you know the built week?

How can you find out what week your MacBook was built?

Look under "About This Mac" and get the serial number by clicking twice on the OS version listed.
The 4th and 5th digits are the build week. My iMac starts "W8502..." so it was a week 02 build.

Similar Messages

How do you know the version of a JAR file ?

how do you know the version of a JAR file ?
is it what is written on MANIFEST.MF ?
for example i have a JAR file
whose MANIFEST.MF has this
Manifest-Version: 1.0
Created-By: Ant 1.4.1so, whats the version of this JAR ? 1.0 ?

anyway, that was JSTL..jar.
Now, come to another JAR file....
whose MANIFEST.MF has......
Manifest-Version: 1.0
Created-By: Apache Ant 1.5.1
Extension-Name: Struts Framework
Specification-Title: Struts Framework
Specification-Vendor: Apache Software Foundation
Specification-Version: 1.1
Implementation-Title: Struts Framework
Implementation-Vendor: Apache Software Foundation
Implementation-Vendor-Id: org.apache
Implementation-Version: 1.1
Class-Path: commons-beanutils.jar commons-collections.jar commons-dig
ester.jar commons-logging.jar commons-validator.jar jakarta-oro.jar s
truts-legacy.jarso, How do you believe whats the version now ? do u go with the comment "Manifest-Version: 1.0" or "Specification-Version: 1.1" ?
definitely, you would go with the "Specification-Version: 1.1" and declare this JAR as STRUTS 1.1
hmmm, so, if nothing is mentioned like above should we follow the MANIFEST version as the JSTL version ? in my earlier example i did not find any comment on ""Specification-Version" ......so , if anybody gives me that JAR , how do i decide whether its 1.0 specification or 1.1 specifucation compliant ?
can you tell whats the JSTL version of my earler example JAR file ?

How do you know the best iMac display size

how do you know the best iMac display size
Only on them fits in the screen window and that makes the font so tiny. The others are too wide or too tall. I usually view at 150 - 200% for vision issues.

You say it's better to do the Media Browser? I'm fairly new to movie, dvd and garage band. How would I go about using the Media Browser instead of straight to iDVD?
Select Your project - go up to Share - Share to Media Browser and as Large (Not HD)
In iDVD select a nice theme - click on Media button - click on Movie - Select Your movie.
NOW - Save as a DiskImage - and test this before burning DVDs - if this Plays OK then either burn the Image by using Disk Util tool (and set down burn-speed to x4) - or burn via iDVD (will take more time)
I want to keep as much quality as I can.
Then don't use iMovie'08 or 09 or 11 - as they all discard every second line resulting in less quality on the DVD. I use iMovie HD6 or FinalCut any version.
Also...I tried to split my project in iMovie...but couldn't find a way. I wound up just making a copy and then deleting out a handful of scenes from the copy...I still have the original at 4:12hrs. Is there a way in iMovie to split a project?
I would make a copy and cut away a bit from the end - calling this Part 1 and from start of the other copy Part 2.
OR - there are other programs that can squees in more to a DVD e.g. Roxio Toast™ - BUT this has two cons.
• It costs - to me it was well spent mony as it can so much more e.g. back engineer a DVD to an editable form
• Squeesing in more on a DVD - costs in QUALITY - and as You want as much as it can be - then 90 minuts portions encoded with Pro-Quality encoding and full quality interlasced material from a video-editor that delivers this is the way to get 100% of what DVDs can do.
DVD is as standard only SD-Video - HD not possibly. Then You need Blu-Ray. (also Roxio Toast™)
Yours Bengt W

How do you know the object is from another database through db link

I have a table named a2z_people. I searched dba_objects, I found this is a public synonym.
How can I know the real table name in the another database. Where is this table come from? In another words, what's the source database?
Thanks!

In DBA_SYNONYMS, there is a DB_LINK column that names the database link being used (assuming the real object is on a remote database). Is that what you're looking for?
Justin

How do you know the audio level of a keyframes

I'm varying the audio levels of clips on the timeline by creating keyframes using the pen tool. I create four points:
1) -inf = beginning of fade-in
2) -5dB = end of fade-in
3) -5db = beginning of fade-out
4) -inf = end of fade-out
But when I'm going back to adjust points, how do I know what level they're at already without having to drag them away from their home position and then back?
Scrolling over them with the mouse (and not clicking) just gives me a crosshair and no info.
I want to make sure that points 2&3 are at the same level, so I can just move the envelope region between them up and down to change the volume. Any quick way to do this to speed up my process?

T-Bob wrote:
I want to make sure that points 2&3 are at the same level, so I can just move the envelope region between them up and down to change the volume. Any quick way to do this to speed up my process?
Specifically to address this point: if you mouse over the audio levels' rubber band segment BETWEEN your points 2) and 3) until the cursor changes to an up/down adjustment arrow ⬍, and move it up/down, it will adjust BOTH the levels at 2) and 3), maintaining the relative difference between them (or, if points 2) and 3) start at the same level, this adjustment will keep them equal as you drag them both up/down together in one action.)
As usual, much easier to DO it, rather than describe it!

How do you know the true age of your ipod classic..

how can i find out the true age of the ipod classic.. i know its a newer version.. but how do i know if it was sitting on a shelf forever or brand new from apple...

You should see it in part of the description once the divice is connected to the computer through a usb cable. Or you could look at the number by going on setting on your ipod touch then go to general then from there go on about scroll down until you see serial number and ther it is.

How do you know the date and time synchronization in the windows version?

Where can I see the date and time synchronization?

There's a toolbar button sitting in the Customize Palette. Move that button to a toolbar or into the Open Menu box; when you hover the cursor over that button a tooltip will appear with the day-of-week and the time of the last Sync event.

Attachment Downloading in Mail - How do you know the status of the download

Hi,
I'm trying to send a keynote presentation from my iMac to my MacBook and it doesn't seem to be working. The attachment shows up in my email, I click on it, and it doesn't really do anything. Is there a way to check the status of the download, or clear all the downloads for mail? I think it's just the size of the file, because pages files work, and even very small keynote files, but not a 3 slide keynote presentation.
Any help with this would be much appreciated.
Brandon

Hi Brandon
If you want to know quite a lot: http://en.wikipedia.org/wiki/LAN
In short a Local Area Network is your network at home. Both your computers are somehow conncted to the internet. Most people don't want to afford seperate internet lines for each computer they own, so they build a LAN.
Many internet providers will give you a modem with more than one network port so you can plug in more than one computers. If there's only one port, most people connect a router to get more ports. If you have wireless at home, you also have a LAN.
Now to the better options: On both copmuters: Go to system preferences > Sharing. Enable File Sharing. To learn more about it, just click on the question mark button at the lower right.
After you did this, open a Finder window. In the sidebar there will be a new item: Shared. If you open the triangle you'll see the computer name of your other computer. This can take a few seconds to show up.
Now you just place the files you want to share in your Public folder so the other Mac can access it.
Regards,
--greg

How do you get the built-in camera to work

I have a new 20" IMAC. I set it up and was not able to get the camera to work. When I go to IChat the microphone enabled is checked and black but the camera enabled is checked but grey. When I go to Phone Booth it says that there is no camera or not connected. All I would like to do is take a photo of myself. PLEASE HELP
IMAC 20 Mac OS X (10.4.8)

Go to Apps/Utilities/System Profiler. In the Hardware list go to USB. Does the built-in iSight show up in the USB High-Speed Bus?
If not, could be a hardware issue and you should call AppleCare to begin troubleshooting with them for possible warranty replacement/repair.

How do you know the battery percentage in the iTouch 5?

I don't know the percentage of my battery in the iTouch. Help please!

- You can purchase one of many apps. Note that % battery is not that accurate.
- You can turn on Accessibility Voice Over feature and when you touch the battery icon the iPod will speak the % battery. See:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)

How do you know the comsumed number of PrintJobLimit?

Hello,
We are using the CR SDK for .NET (SAP Crystal Reports runtime engine for .NET Framework4).
We know about changing the value of PrintJobLimit.
Our question:
How do we see the number of PrintJobLimit is consumed during performing print job?
Best regards,
Toshi

Hi Toshi,
Unfortunately there is no API to get the number of jobs currently being processed.
Add your Enhancement request to Idea Place.
Don

How do you get the built in wi-fi to work

i dont know how to get the wi fi to work i just got it yesterday and i dont know how to get the wi fi to work it says it has built in wi fi how does it work?

Also see:
iOS: Troubleshooting Wi-Fi networks and connections
iOS: Recommended settings for Wi-Fi routers and access points
iOS: Connecting to the Internet

How do you know the bit rate of a video clip?

I have video clips from my video camera recorded in MPEG 2, PAL standard definition 720x576. 2 questions:
1. How can I find out what bit rate the video is recorded at?
2. Knowing this, can I in PProCS4 encode this for DVD without any transcoding (assuming, of course, no effects or fades etc have been added)?
I like to keep the coding the same, to avoid the quality loss of transcoding to a different bit rate.
I use 256 kb/s audio in MPEG 1 layer 2 (pretty much standard DVD format).
Any info appreciated.

In Ulead Mediastudio Pro, you can see the data rate of the video, and also in DVD Movie Factory select "do not convert..." etc, where un-edited clips are not transcoded, to give maximum picture quality. I dropped MSP, as Corel (having taken over Ulead) has, sadly' dropped the product, so I bought PProCS4 hoping it would be at least as capable. Alas. Having said that, in most respects PPro is as good or better than MSP, and runs fine on Vista and Win7 beta (which I am using now), so I am still happy I get PPro.

How do you know the size of a movie BEFORE you export it?

I made a project in iMovie 09, then sent it over to iDVD. The DVD won't burn because of the following error:
========================================
Your project exceeds the maximum content duration. To burn this project, remove some content.
Project:
- total project duration: 132:01 minutes
- total project capacity: 4.175 GB (max. available: 4.172 GB)
Menus:
- number of menus in project: 1 menus
- total menu duration: 0:00 minutes
- total menu capacity: 83.0 KB
Movies:
- total movies duration: 132:01 minutes
- total movies capacity: 4.175 GB
========================================
So basically, the project is 0.003 GB over capacity! iMovie spent about 8 hours rendering this thing and now I have to do the entire thing again!
How do I find out how big this file will be when it's done so I don't waste another day rendering a project that's essentially useless?

You say it's better to do the Media Browser? I'm fairly new to movie, dvd and garage band. How would I go about using the Media Browser instead of straight to iDVD?
Select Your project - go up to Share - Share to Media Browser and as Large (Not HD)
In iDVD select a nice theme - click on Media button - click on Movie - Select Your movie.
NOW - Save as a DiskImage - and test this before burning DVDs - if this Plays OK then either burn the Image by using Disk Util tool (and set down burn-speed to x4) - or burn via iDVD (will take more time)
I want to keep as much quality as I can.
Then don't use iMovie'08 or 09 or 11 - as they all discard every second line resulting in less quality on the DVD. I use iMovie HD6 or FinalCut any version.
Also...I tried to split my project in iMovie...but couldn't find a way. I wound up just making a copy and then deleting out a handful of scenes from the copy...I still have the original at 4:12hrs. Is there a way in iMovie to split a project?
I would make a copy and cut away a bit from the end - calling this Part 1 and from start of the other copy Part 2.
OR - there are other programs that can squees in more to a DVD e.g. Roxio Toast™ - BUT this has two cons.
• It costs - to me it was well spent mony as it can so much more e.g. back engineer a DVD to an editable form
• Squeesing in more on a DVD - costs in QUALITY - and as You want as much as it can be - then 90 minuts portions encoded with Pro-Quality encoding and full quality interlasced material from a video-editor that delivers this is the way to get 100% of what DVDs can do.
DVD is as standard only SD-Video - HD not possibly. Then You need Blu-Ray. (also Roxio Toast™)
Yours Bengt W

How do you enable the built-in predictive text feature?

Built-in predictive text appears in the new features list, but I don't see an obvious way to access it. Help?

I looked at your laptop service manual. These are your best options as the daughter card/ antina solution used in your laptop does not appear to have a direct upgrade. Newer laptops use a mini PCI (mPCI) solution.
Consider an Expresscard 34 or 54 solution. You laptop appears to have an Expresscard 54 slot that supports both 54 and 34 size cards.
Cisco-Linksys WEC600N Dual Band Wireless-N Ultra RangePlus Expresscard
StarTech.com ExpressCard 34mm to 54mm Stabilizer Adapter - 3 Pack ECBRACKET (Black)
or
Asus Black Diamond Dual Band (2.4GHz 300Mbps/5GHz 300Mbps) Wireless-N USB Adapter with Graphical Eas...
USB Network Addapters
Your laptop motherboard does not appear to support mini PC,I or I could of suggested an mini PCI network addapter or mini PCI network addapter combo card w/ Bluetooth. (an option with newer laptops)
Please mark as solved and kudos.

How do you know the built week?

Similar Messages

Maybe you are looking for