How do you know the iPad is charged in iOS 7?

When the charge hits 100% (This option is turned on in my iPad settings), in iOS 7, how can one tell that the battery is charged? I've tried to look for clues but there seems to be none.

100% means your battery is fully charged.

Similar Messages

  • How do you calibrate the iPad battery?

    How do you calibrate the iPad battery and is it necessary to discharge battery 100%. I have  the 3 rd generation iPad, it has been almost a year since I purchased it and the battery when fully charged reads 100%. Recently, I visited my local Jump Plus store and the staff said I should drain the batteries on my iPad & iPhone completely until they are dead and recharge once a month. Is this accurate?  It is my understanding that you should not drain the batteries completely? Also, is that the same as calibrating the battery?

    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    http://www.apple.com/batteries/ipad.html

  • How do you update the ipad 4.3.5 with a computer?

    how do you update the ipad 4.3.5 with a computer?

    Update it from iTunes on a computer as described at the bottom of this article; there isn't a Software Update option in General on iOS versions prior to 5.0. It can only be updated directly to the newest iOS release supported by the device’s hardware, which is iOS 7.1.1 for devices with at least 512MB of RAM.
    The maximum iOS version for the third generation iPod touch and original iPad is 5.1.1.
    If you don't know what device you have, append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
    (108171)

  • How do you find the iPad phone number for cellular data?

    How do you find the iPad phone number for cellular data?

    I know this post was a long time ago but people still seem to be viewing it.
    Quickest way:
    Via the iPad on 3G, go to http://m.telstra.com. The service number is then displayed and you are given the option to recharge.

  • How do you add the ipad device to your itunes account? Please!!

    How do you add the ipad 2 device to your itunes account

    There is no need to add the iPad, just sign into your iTunes account when you need to.

  • How do you connect the iPad too, How do you connect the iPad to apple tv

    How do you connect the iPad to Apple TV

    On the same network and same apple ID with home sharing turned on they should connect.

  • How do you know the version of a JAR file ?

    how do you know the version of a JAR file ?
    is it what is written on MANIFEST.MF ?
    for example i have a JAR file
    whose MANIFEST.MF has this
    Manifest-Version: 1.0
    Created-By: Ant 1.4.1so, whats the version of this JAR ? 1.0 ?

    anyway, that was JSTL..jar.
    Now, come to another JAR file....
    whose MANIFEST.MF has......
    Manifest-Version: 1.0
    Created-By: Apache Ant 1.5.1
    Extension-Name: Struts Framework
    Specification-Title: Struts Framework
    Specification-Vendor: Apache Software Foundation
    Specification-Version: 1.1
    Implementation-Title: Struts Framework
    Implementation-Vendor: Apache Software Foundation
    Implementation-Vendor-Id: org.apache
    Implementation-Version: 1.1
    Class-Path:  commons-beanutils.jar commons-collections.jar commons-dig
    ester.jar commons-logging.jar commons-validator.jar jakarta-oro.jar s
    truts-legacy.jarso, How do you believe whats the version now ? do u go with the comment "Manifest-Version: 1.0" or "Specification-Version: 1.1" ?
    definitely, you would go with the "Specification-Version: 1.1" and declare this JAR as STRUTS 1.1
    hmmm, so, if nothing is mentioned like above should we follow the MANIFEST version as the JSTL version ? in my earlier example i did not find any comment on ""Specification-Version" ......so , if anybody gives me that JAR , how do i decide whether its 1.0 specification or 1.1 specifucation compliant ?
    can you tell whats the JSTL version of my earler example JAR file ?

  • How do you know the best iMac display size

    how do you know the best iMac display size
    Only on them fits in the screen window and that makes the font so tiny.  The others are too wide or too tall.  I usually view at 150 - 200% for vision issues.

    You say it's better to do the Media Browser?  I'm fairly new to movie, dvd and garage band.  How would I go about using the Media Browser instead of straight to iDVD?
    Select Your project - go up to Share - Share to Media Browser and as Large (Not HD)
    In iDVD select a nice theme - click on Media button - click on Movie - Select Your movie.
    NOW - Save as a DiskImage - and test this before burning DVDs - if this Plays OK then either burn the Image by using Disk Util tool (and set down burn-speed to x4) - or burn via iDVD (will take more time)
    I want to keep as much quality as I can.
    Then don't use iMovie'08 or 09 or 11 - as they all discard every second line resulting in less quality on the DVD. I use iMovie HD6 or FinalCut any version.
    Also...I tried to split my project in iMovie...but couldn't find a way.  I wound up just making a copy and then deleting out a handful of scenes from the copy...I still have the original at 4:12hrs.  Is there a way in iMovie to split a project? 
    I would make a copy and cut away a bit from the end - calling this Part 1 and from start of the other copy Part 2.
    OR - there are other programs that can squees in more to a DVD e.g. Roxio Toast™ - BUT this has two cons.
    • It costs - to me it was well spent mony as it can so much more e.g. back engineer a DVD to an editable form
    • Squeesing in more on a DVD - costs in QUALITY - and as You want as much as it can be - then 90 minuts portions encoded with Pro-Quality encoding and full quality interlasced material from a video-editor that delivers this is the way to get 100% of what DVDs can do.
    DVD is as standard only SD-Video - HD not possibly. Then You need Blu-Ray. (also Roxio Toast™)
    Yours Bengt W

  • How do you configure the ipad to print air print but of A4 size please ??????

    how do you configure the ipad to print air print but of A4 size please ??????

    Frankie,
    The usual setting is in Printing Preferences.
    In case you haven't found it yet - it has been a while since your original post - you may have your tray setting stuck on the 4X6 tray.
    I can provide details and "how-to" if you need more help.
    Printer model info would be helpful, and do you have your printer software loaded yet?
    I hope this helps!                                 
    We work hard to help!
    When ever you see a Helpful Post - Click the Kudos Star on the Left as Thanks!
    Did this Post solve your problem?  Mark it “Accept as Solution”!
    Note: You can find the “Accept as Solution” box on threads started by you.
     2012 Year of the Dragon!
    Dragon Tips!
    Install your Printer Software!
    Look for your Printer’s Software at your printer’s own website!
    Software, manuals, alerts, “how-to” information, and much more!
    To see if there is software for your printer, Start at:  Support and Drivers
    Kind Regards,
    Dragon-Fur

  • How do you clean the iPad magnetic cover? Mine is light gray, I did not pick the color as I got it from work.

    How do you clean the iPad magnetic cover? Mine is light gray, I did not pick the color as I got it from work.

    You can clean any mild soap(no harsh chemical) as i do mine i just take it off ipad from cover wash throughly inside and out and hang it until dry.

  • How can i know the ipad is locked

    i need to know how can i check the ipad is locked to at&t or not? before buy it?

    In the US you will find iPads with an AT&T SIM card because in the US that's the only network supporiting the 3G GSM iPad.  Nonetheless, THE IPAD 2 IS NOT LOCKED TO AT&T.  You can take out the SIM card and use another SIM from another carrier.

  • How do you know the object is from another database through db link

    I have a table named a2z_people. I searched dba_objects, I found this is a public synonym.
    How can I know the real table name in the another database. Where is this table come from? In another words, what's the source database?
    Thanks!

    In DBA_SYNONYMS, there is a DB_LINK column that names the database link being used (assuming the real object is on a remote database). Is that what you're looking for?
    Justin

  • How do you keep the ipad from deleting your e-mail messages immediatly

    How do you setup the e-mail to keep your ipad from deleting messages immediately.

    What do you mean by immediately?
    If you have a POP3 account go to Settings>Mail>the accounts>Advanced and you can select when to remove from server.

  • How can I get the ipad to charge on my usb. I have a 2.0 and still not showing it charges.

    I have  a laptop with a 2.0 usb.  I have an ipad and can't get it to charge on the laptop.  I called apple and they said I need a firmware update. How do I do this and will that work? Help, thanks

    Hi,
    Because the iPad requires more power than from a normal USB port can supply therefore you can not charge an iPad using ONE USB port on a laptop/PC.  Please try this free utility, many HP users say it works:
       http://event.asus.com/mb/2010/ai_charger/
    Regards, 
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do you get the iPad 1 to play music

    I recently bought an iPad 1. I synced it up w/iTunes on my iMac.
    For some reason, I can't get any of the music that was synced to play on my iPad?  Do you need to download iTunes or an App to play music on the iPad?
    Thanks

    When you synced your iPad, did you then open the actual device (click on the device on the left hand side)?  Then when the device is open, you go up to music and check the songs/albums you want to sync to the iPad.  The music will then appear in your iPod app, which is native to the iPad.  You open the iPod and your synced music should be there and easily played.  If that is not the case, let us know.

Maybe you are looking for