How do you launch trial Photoshop after a seemingly successful install?
I downloaded the trial version of Photoshop CS5.5. The installation progress went to 100% and I clicked "Done". The only icon on desktop is "Adobe Download Assistant". Surely something is wrong but I'm not sure where to troubleshoot. Photoshop was installed on a PC using Windows 7 Home Premium 64 bit. I found a folder with "Set- up", but that started "Initializing Installer", Been there, done that. Any thoughts?
Are you able to locate the program under Start>All Programs? Photoshop CS5.5 does not create a shortcut automatically on the desktop for you. You will need to create your own shortcut if you wish to launch Photoshop from the desktop. Please also make sure to create a shortcut and not move the application to the desktop.
Similar Messages
-
does anyone know? Adobe just told me they don't support 5.5 or 6 through phone or chat. (and I thought time warner customer service was bad)
I'm on a mac, 10.6.8 snow leopard.
Other than this camera raw update not working, everything else is working fine.
thanks for any help.
Dave Wofford
Horse & Buggy PressI am not sure that you will be able to. XP-64 was never supported in any version of PrPro. Some got later versions to run, but most usually had some issues.
You might do some research on DirectX, to see which versions were supported by XP-64. That OS, though providing beta-testing for 64-bit OS's to come, was essentially an evolutionary dead-end. It was completely replaced with Vista-64. Again, some users had issues with Vista-64 and later versions of PrPro, than yours. You might have better luck, trying Win7-64, but that is just a guess.
Good luck,
Hunt -
I also want to add that I've found the updates to logic pro 9.1.2 thru 9.1.7. and when I download them they tell me they are either not needed or don't seem to actually update anything. Someone was saying that Logic Studio isn't a fan of Lion and I should install Snow Leopard, complete Logic updates and then re-install Lion. PLEASE HELP!!!
Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan -
How can I get trial for after effects 4?
it is the only version my PC meets the requirements.Hello yaniv7m,
in my eyes you will find it only in shops like ebay or Amazon, like this:
http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.Xafter+ef fects+4&_nkw=after+effects+4&_sacat=0
or
http://www.amazon.com/Adobe-After-Effects-CS4-VERSION/dp/B001EUJ0SI/ref=sr_1_1?s=software& ie=UTF8&qid=1407396391&sr=1-1&keywords=after+effects+cs4
Good luck!
Hans-Günter -
I used one Apple ID to set up iCloud after iOS 6 was downloaded to my iPhone, now I want to change the Apple ID for iCloud on my iPhone but I'm unable to. How do you change the ID after it's been set up?
See https://discussions.apple.com/message/19218571#19218571.
-
how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon
To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.
-
How can you save from photoshop to pdf with intact formlayers?
How can you save from photoshop to pdf with intact formlayers?
No, it is form layers for a cutting machine, when you save to pdf from ill or indesign you can select make acrobat layers but not in photoshop.
Do anyone have a sullotion? -
How do you launch an app from a shell?
how do you launch an app from a shell? how about an example... say, launch the texteditor app.
To open an app from the terminal use the command open followed by the fullpath pf the command.
So for TextEdit you would enter
open /Applications/TextEdit.app -
How Do You Reset Adobe Photoshop Touch Add Fade gallery?
How Do You Reset Adobe Photoshop Touch Add Fade gallery? I dragged them off screen and now can not figure how to get default back. I still have round one left. Thank you for any help.
Michael Bermant, M.D.
Retired Plastic SurgeonHi
To find your anchors again, spread your 2 fingers apart on screen to zoom the canvas out. You should be able to access the Fade anchors again! Hope this helps -
How do you restore your playlists after a migration from my old pc?
how do you restore your playlists after doing a migration from my old pc?
Move iTunes following these instructions:
iTunes: How to move your music to a new computer (Mac or Windows):
http://support.apple.com/kb/HT4527 -
How do you launch apps on your device when it keeps saying my device was not known any advice?
How do you launch apps from your device mine being a Macbook pro?
Hi TammyPruett,
I apologize, I'm a bit unclear on the exact issue you are describing. If you are having issues launching applications on your Mac, you may find the following articles helpful:
Mac OS X: How to troubleshoot a software issue
http://support.apple.com/kb/ht1199
Apple Support: Troubleshooting the Mac App Store
http://support.apple.com/kb/ts3624
Regards,
- Brenden -
How are you launching SimpleTap?
Lenovo SimpleTap has several different options for launching it:
1. you can click on the red dot near the top-right of the screen (and you can move the dot along the edge of the screen wherever you want it)
2. you can use the 2-finger-double-tap gesture on the touchpad
3. you can click on the pinned taskbar icon
4. (for systems with a touchscreen) you can use the 2-finger-double-tap gesture on the screen
How are you launching SimpleTap? Which methods have you tried and which ones work best for you?
Lenovo appreciates your valuable feedback.jkriegel,
There is a patch for that issue, please download the attached zip and run the EXE inside it.
Attachments:
SimpleTapLaunchPoint.zip 127 KB -
How do you make sure Weblogic 6.0 sp1 is installed
Is there any ways to check what version and service pack is installed?
I got an customer machine which had Weblogic 6.0 is installed,
but I don't know how to find out if service pack 1 is installed
or not. Thanks.You do not have SP1 installed correctly. The version string should be
"6.0 Service Pack 1 03/04/2001 22:05:05 #101616"
"Steve Schaber" <[email protected]> wrote:
>
I was able to get the VERSION admin command to work but only after setting
the
Admin Port on the server to 0. Then getting the version of the server
from the
7001 port was successful, although there is no mention of sp1? This
is what I
am getting:
WebLogic Server Build: 6.0 12/13/2000 22:49:45 #94427
WebLogic XML Module: 6.0 12/13/2000 23:02:44 #94427
Would anyone know if the service pack 1 is installed correctly be looking
at this?
What am I supposed to be seeing?
Thanks in advance.
"Steve Schaber" <[email protected]> wrote:
I am trying to run this command on a solaris 8 machine and am getting
the following
error:
failed to connect to 't3://localhost:7003' due to no server found at
't3://localhost:7003'
I have tried the 7001 port as well. I am always getting this error.
Even though
the server is running and I am able to run the server console via the
browser.
After I have successfully installed the sp1 upgrade. What is the version
supposed
to be in the Weblogic Version number in the Version tab under Monitoring?
"Mike Reiche" <[email protected]> wrote:
Someone gave me this...
You need to use weblogic.Admin java weblogic.Admin -url t3://mymachine:7001
-username system -password XXXXXXXX VERSION
"albert" <[email protected]> wrote:
Is there any ways to check what version and service pack
is installed?
I got an customer machine which had Weblogic 6.0 is installed,
but I don't know how to find out if service pack 1 is
installed
or not. Thanks. -
I bought an Adobe photoshop elements 12 and successfully installed. I failed to activate as it said I am offline whereas I am online. I tried offline activation but failed. Could someome help me? Thanks
Hi Agathe,
Please refer to the below link and follow the steps.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
Thank you for posting on Adobe Forums. -
PSE installation issues - How do you uninstall trial version???
I've read several posts about this already, but I can't seem to figure out how to uninstall the trial version of PSE for mac. (I am getting the critical errors/incompatible payloads error message. Shame on Adobe for not fixing this yet.)
I read not to dump it into the trash. But when I launch the program from untilities I don't see any option to unintall. One post said to "remove it" How do you do this? The delete key doesn't work. How on earth do you uninstall something? I can't even get into the trial version because it keeps asking for a serial number (and I've read entering it doesn't help. I'm so lost, and really didn't plan on spending my hard earned Friday night doing this.) Any help would be much much appreciated!There is no uninstaller. The only two icons in the Adobe Installer folder were something called Exented Scripts Installer and the Photoshop Elements icon. I got tired of messing around with it after several hours and finally ran the cleanscript 3 program which worked; I was able to install the purchased version right away. It still really bothers me that I could not figure out how to uninstall though, I'm sure I will need to in the future.
I wonder if my computer is just missing this installer/uninstaller option?
Maybe you are looking for
-
Error while adding the secondary node in shared APPL_TOP.
Hi, We are getting the below error , when trying to add the secondary node in shared APPL_TOP . We ran the commnad. perl -I <AU_TOP>/perl txkSOHM.pl AutoConfig is configuring the Applications environment... AutoConfig will consider the custom templat
-
Updating Requisition No while creating PO via FM-BAPI_PO_CREATE1
Hi , Our requirement is creating Po via FM BAPI_PO_CREATE1 and we are passing data from other Application through that BAPI. Tracking field of the Application with SAP is only Requisition No. I want to know in which field of that BAPI I'll make the
-
Can No Longer Burn To External Drive
About two years ago my then six-year-old 800 mhz flat panel iMac's SuperDrive started acting erratic. Rather than replace the internal drive I purchased an external LaCie firewire drive. I was able to both read and write from this drive. I am not pos
-
Problem sync with iphone could not transfer music because of unknown error -5000
windows Itunes will not sync my music with Iphone 4s because of unknown error (-5000) ?????
-
oracle.xml.sql.OracleXMLSQLException: ORA-06502: PL/SQL: numeric or value error: character string buffer too small ORA-06512: at "SYS.DBMS_LOB", line 648 ORA-06512: at line 1 Trying to display an email message stored in a clob. What the issue here an