How do you link two audio clips to one video clip?

Hi guys,
I want to think multiple audio clips to one video clip and aint know how to do it! I found this page on Adobe knowledge base:-
http://livedocs.adobe.com/en_US/PremierePro/3.0/help.html?content=WS1c9bc5c2e465a58a91cf0b 1038518aef7-7f40.html
It says you can do it but I don't think it explains how? Can anyone provide me with the simple steps required to link two audio clips to one video clip? Many thanks.

Do you mean manual syncing? I've been reading this thread about workaround, which aren't working for me: http://forums.creativecow.net/thread/344/21236
But the question they are asking is the same one I am asking. Isn't this a typical situation, having multiple mics for one camera? For example, if someone filmed a concert with one camera but used both the camera audio, and ambient mic, and a mix from the board, then that would be 3 audio tracks with 1 video track. I'm in a similar situation, and I'm finding it hard to believe that FCPX isn't equipped to edit this way. There must be some way to get one video clip (with reference audio) to sync with four audio tracks.

Similar Messages

How do you convert the audio from a mpeg4 video file to mp3?

How do you convert the audio from a mpeg4 video file to mp3 format?

Probably the easiest way to do this is to download a free media convertor. Most will be able to convert video into audio files.

How to combine video clips into one video clip using FCPX

I typed this into the search engine but could not come up with anything. How do you combine Video clips into one Video clip using FCPX? Thanks in advance.
Gar

The simple answer is to put the clips together in a project in the desired order and export (oops, the new word is share [YUK!]) a master file.
But maybe you should say a little more about the clips to determine whether the answer I've given is relevant to yor situation.

How do you sync two audio clips without a clapper board?

... so the cameras had to be well back to catch the whole shot, and to catch the sound, we used a separate audio recorder closer to the performers.
In hindsight, I suppose we could have used a clapper board but if the board was close to the recorder, it would be hard to see... and if it was closer to the cameras, it would be hard to hear the clap on the recorder.
now the question is how to perfectly sync the better audio from the recorder with the lesser audio from the cameras (then delete the lesser audio)
so far, its not quite right and their lips are off like an old Japanese Sci Fi Movie. Is there any way to move one track frame by frame over the other to get it right? (some sort of keyboard command?)
OR is there some sort of app that someone wrote that could overlay the the good audio with the reference audio and sort of "snap it" into position? The waveforms look similar aside from the quality and strength of the signals.

Rob, Andy
just wanted to revisit this post. Were onto something great here!
so to update us, I DL'ed "PluralEyes" but it didn't work. Each time I pointed it at the program file, it shut itself down. I tried rebooting the whole machine, trashing preferences etc but it wouldn't work.
the developers were great! got back to me asap. I sent the crash reports and the file I was working on and they discovered a "huge bug"
Today, they emailed me a link to a FIX which be included in their next version but they allowed me to try it today and guess what? it FIXED it!
So I started the app and let it run (its over 2 hr program) the app ran for like an hour and put out two new sequences, "unsynced" and "synced"
but i have some questions;
there were two cameras and a separate audio recorder.
in "synced" it lined up the recorder audio with the camera 1 audio but it pushed camera 2 and its audio to the side (further down the timeline)
of course, what we want is for camera 2 to also be synced (or sunk;-) so when we cut between cameras, the lips are still in sync.
now how do we get it to line up camera 2?
screen shot.
in the "synced" sequence, we need to sync camera 2 with camera 1.
also, it has left out much of the program in the "synced sequence" there are actually three tapes from each camera. you can see here that we are left with one tape from each camera.
what do we do from here?
also, before moving anything around, I can link the tracks but that doesnt stop them from getting out of sync. and locking the tracks means they cannot be moved. so how do you attach the audio to video without getting out of sync?
.... In the "good ol days" (so Ive heard) editors had years and years to master their craft. Film & Splicing were in power for like what? 75 years?
Now there are new programs emerging every day with entirely their own learning curve! But if this works just this once, its well worth buying it! its a fantastic app! Im sure it just takes some getting used to!

How do you select two audio capture devices?

Hi all,
At the moment I'm simply using CaptureDeviceManager.getDeviceList to get a list of all the capture devices on my system. Now when I print this it looks like this...
[DirectSoundCapture : dsound://
LINEAR, 48000.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 48000.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 48000.0 Hz, 8-bit, Stereo, Unsigned
LINEAR, 48000.0 Hz, 8-bit, Mono, Unsigned
LINEAR, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 44100.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 44100.0 Hz, 8-bit, Stereo, Unsigned
LINEAR, 44100.0 Hz, 8-bit, Mono, Unsigned
LINEAR, 32000.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 32000.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 32000.0 Hz, 8-bit, Stereo, Unsigned
LINEAR, 32000.0 Hz, 8-bit, Mono, Unsigned
LINEAR, 22050.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 22050.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 22050.0 Hz, 8-bit, Stereo, Unsigned
LINEAR, 22050.0 Hz, 8-bit, Mono, Unsigned
LINEAR, 16000.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 16000.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 16000.0 Hz, 8-bit, Stereo, Unsigned
LINEAR, 16000.0 Hz, 8-bit, Mono, Unsigned
LINEAR, 11025.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 11025.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 11025.0 Hz, 8-bit, Stereo, Unsigned
LINEAR, 11025.0 Hz, 8-bit, Mono, Unsigned
LINEAR, 8000.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 8000.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 8000.0 Hz, 8-bit, Stereo, Unsigned
LINEAR, 8000.0 Hz, 8-bit, Mono, Unsigned
, JavaSound audio capture : javasound://44100
LINEAR, 44100.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 44100.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 22050.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 22050.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 11025.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 11025.0 Hz, 16-bit, Mono, LittleEndian, Signed
LINEAR, 8000.0 Hz, 16-bit, Stereo, LittleEndian, Signed
LINEAR, 8000.0 Hz, 16-bit, Mono, LittleEndian, Signed
Now my system actually has 2 michrophones attatched to it. At the moment I'm using DirectSoundCapture to record audio. My first question is, how do you detect multiple audio capture devices? and then of course, how can you record off of different audio capture devices?
Anything would be helpful, if theres a tutorial somewhere on this which i've missed somehow, please tell me. I'm probably missing something pretty major I figure.

I posted in a different thread that I was using the old javax.sound.sampled library to try to record. However, using this library it was quite simple to get a list of devices which could then be used to make a SourceDataLine that could be used to record. However, I was having trouble actually recording and switched to JMF as it has more features and I thought it would be simpler to use. It probably is but I have been struggling. I can record audio in JMF fine but I cant get a device list as I could with the javax.sound.sampled library.
I'll put the code I was working off in here anyway. It shows what I want to do, I just want to do it in JMF.
Note that this code was written 4 years ago by a Matthias Pfisterer and not by myself.
import javax.sound.sampled.AudioFileFormat;
import javax.sound.sampled.AudioFormat;
import javax.sound.sampled.AudioSystem;
import javax.sound.sampled.DataLine;
import javax.sound.sampled.Line;
import javax.sound.sampled.LineUnavailableException;
import javax.sound.sampled.Mixer;
import javax.sound.sampled.SourceDataLine;
import javax.sound.sampled.TargetDataLine;
     /** List Mixers.
          Only Mixers that support either TargetDataLines or SourceDataLines
          are listed, depending on the value of bPlayback.
     public static void listMixersAndExit(boolean bPlayback)
          out("Available Mixers:");
          Mixer.Info[]     aInfos = AudioSystem.getMixerInfo();
          for (int i = 0; i < aInfos.length; i++)
               Mixer mixer = AudioSystem.getMixer(aInfos);
               Line.Info lineInfo = new Line.Info(bPlayback ?
                                        SourceDataLine.class :
                                        TargetDataLine.class);
               if (mixer.isLineSupported(lineInfo))
                    out(aInfos[i].getName());
          if (aInfos.length == 0)
               out("[No mixers available]");
          System.exit(0);
Calling this method on my system will print the following.
Available Mixers:
Microsoft Sound Mapper
AK5370
SoundMAX Digital Audio
AK5370 (2)
This looks very different to what I get when I call CaptureDeviceManager.getDeviceList()
How can I achieve the equivilent in JMF?

How do I sync multiple audio clips to one video clip?

I have video (with stereo audio from a camera mic), and for each take, there are also four additional mono audio tracks that line up with it. It was footage shot outdoors in the city, so I guess the filmmakers just wanted to have as many options for sound mixing as possible given how much background noise there would be. I have tried selecting the video clip and the four audio clips at once and selecting "synchronize clips," but it doesn't work. It spits out a synchronized clip that seems to have converted two of the mono tracks into one stereo track... and then disregarded the remaining two mono tracks. It's a mess. It's likely someone else will fine tune the audio once I'm done cutting the video together... but I'd like to get all the audio tracks properly synced from the start. Thanks for any help you can offer.

Do you mean manual syncing? I've been reading this thread about workaround, which aren't working for me: http://forums.creativecow.net/thread/344/21236
But the question they are asking is the same one I am asking. Isn't this a typical situation, having multiple mics for one camera? For example, if someone filmed a concert with one camera but used both the camera audio, and ambient mic, and a mix from the board, then that would be 3 audio tracks with 1 video track. I'm in a similar situation, and I'm finding it hard to believe that FCPX isn't equipped to edit this way. There must be some way to get one video clip (with reference audio) to sync with four audio tracks.

How do you know the bit rate of a video clip?

I have video clips from my video camera recorded in MPEG 2, PAL standard definition 720x576. 2 questions:
1. How can I find out what bit rate the video is recorded at?
2. Knowing this, can I in PProCS4 encode this for DVD without any transcoding (assuming, of course, no effects or fades etc have been added)?
I like to keep the coding the same, to avoid the quality loss of transcoding to a different bit rate.
I use 256 kb/s audio in MPEG 1 layer 2 (pretty much standard DVD format).
Any info appreciated.

In Ulead Mediastudio Pro, you can see the data rate of the video, and also in DVD Movie Factory select "do not convert..." etc, where un-edited clips are not transcoded, to give maximum picture quality. I dropped MSP, as Corel (having taken over Ulead) has, sadly' dropped the product, so I bought PProCS4 hoping it would be at least as capable. Alas. Having said that, in most respects PPro is as good or better than MSP, and runs fine on Vista and Win7 beta (which I am using now), so I am still happy I get PPro.

How do you create two apple ids for one email address.

I bought two i pads for my kids. Since we have just one email address, everytime I try to create a new apple id it says I already have one. They need separate ids so their friends can facetime with one and not the other. Can't figure out how to create two apple ids with one email address.

Donnathemom wrote:
Well any ideas on how to solve this problem? When my daughter does facetime with someone it says she's Wyatt. She's not real happy about that.
Get her an email address, even if she never uses it. They're free and available almost everywhere. The only requirement is that the address be a valid one.
Edit...
You can even use an "alias" of yours. That's a fake address that actually sends everything to you. Check with your current email supplier.

How do I link two icloud emails to one?

I have my old email linked to my phone and my new email linked to iPad...Can you tell me how to merge them to one email and one icloud??

I assume by "email" you mean ID (which looks like an email address). You can merge the data from one account with the other by signing into the account you want to abandon, then migrate the data from that account and merge it with the other. To do this, sign into the account you are leaving, then save any photo stream photos you wish to keep to your camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. If you are syncing notes with account, you'll need to open each one and email them to yourself so you can later copy and paste the text into new notes created in the other account account as these cannot be migrated. Then go to Settings>iCloud, tap Delete Account, choose Keep on My iDevice and provide the password when prompted (if running iOS 7). Then sign into the other account and choose Merge to upload the data from the old account and merge it with the new one.
You will be leaving the old iCloud email account behind as you can only have a single iCloud email account with each iCloud account.

How to use two audio souces in one multicam clip

I have a three cameras, and an additional audio source. Making the multicam clip with of the four elements was easy, however I would like to use both the audio from two different sources at the same time. Is this possible? I know about switching the audio from one source to the other, but in some cases, I have talent on stage left and on stage right, and I need the audio pick up from both regardless of the video angle.

You can do it this way.
In the multicam select audio to left clip.
Then find the right clip, detach its audio, take its audio & align it to the multicam clips.
This way you have audio from let & right

How do you link two Indesign Files

I am creating an IPad App in InDesign, made up of 8 different InDesign Files. eg Wedding.indd, Travel.indd, Pricing.indd, Home.indd, etc.
My aim is to link the Home Page to each of the other pages so that when a user taps for example Wedding on the Home page it will take them to the Wedding Page and so on.
I have used go to page with no luck and go to file again with no luck, can anyone out there help with this please?
Thanking you in advance
Barb

See https://helpx.adobe.com/digital-publishing-suite/help/hyperlink-overlays.html#create_links _to_other_articles for instructions on how to do this.
Neil

How do you merge two different users on one computer?

I created a user account on my computer, then when I used Migration Assistant to transfer some of the files off my old computer onto my new MacBook Air it transferred them into a new user account. How do I merge the two different users? They are both me.

You can't "merge" users, you have to transfer the files using intermediate steps to deal with Permissions issues.
You found out first hand that you should use Setup Assistant, rather than Migration Assistant to perform the action that is now causing trouble, and time.
1) Log in to the A account.
2) Locate all the files you want to move. Move them to /Users/A/Public. Note: Don't move any System-created top-level folders, like Documents, Pictures, Music, Movies, etc. Just move their contents.
3) Log in to the B account.
4) Navigate with Finder to /Users/A/Public. Drag the files to the Desktop. This will make new copies of them that will have the correct permissions for User B.
5) Put the new copies of the files away in the appropriate places in B's home folder.
6) Delete the A user account if it is no longer needed.
Doing it this way will ensure that there are no permissions headaches with the files after they are moved.
Also, make sure that you BACK UP all of your data before starting.
Credit: to user Kiraly for the process.

HT5625 How do you merge two Apple IDs into one account?

I have two Apple IDs (it's a long story) with mixed content. I'd like to merge the accounts into one account, in order to synchronize my apple products. How do I do it?

1. Click here and ask the iTunes Store staff if they'll do it. They probably won't.
2. Because Apple generally doesn't permit that.
3. Because the content remains associated with your Apple ID when you share it with other people.
(102945)

How do you combine two separate paths into one?

I have two two separate paths that overlap and I want to combine into one path. How do I do that?

I've now worked it out thanks it thanks. I highlighted the main path and the outer path to the second one and clicked on merge shape components. Then highlighted the inner path and did the same and this has worked.

How do you link 2 text boxes in new pages

How do you link two text boxes in the new pages. The old one was much easier to use.

I think this is impossible! Ive been trying today and I couldnt do it. Then I opened up an old document that had text linking in it and I got a message telling me that the text boxes were now unlinked! Why would you remove that? For me this software is now useless. How on earth do I get my old version back?
<Edited by Host>

How do you link two audio clips to one video clip?

Similar Messages

Maybe you are looking for