How do you load wav files in the EXS24?

Hey all - I'm new w/the EXS24 and am trying to import wav files off a sampler CD I bought. I can't figure out an easy way to do it. When I imported some Akai CD's before, it was as simple as opening AKAI convert and inserting the CD. Now, when I go to the "load mult-sample" for these wav's - it wants me to do everything one at a time. Surely, there's got to be an easier way than loading hundreds of samples one at a time. Any suggestions from all you EXS24 pros out there?

If you can get to the instrument editor, drag and drop your regions or files onto the keyboard and answer the following questions. To preview it have an EXS24 loaded up with EXS Instrument #5678 (or whichever number it happens to be.

Similar Messages

How do you load artworks automatically into the indeisgn CS3

Hi All,
How do you load artworks automatically into the indeisgn CS3. Is it through a script or any other way.
Thanks
Devakanth

"artworks" is a bit vague...can you expand?
File > Place is the usual way, but there are times when cut and paste is fine or better.

How to play a wave file through the DAQ board?

Hi there,
we want to play a wave file that is saved on the harddrive via the DAQ board. Means we want to connect a amp to the analog output of the DAQ to amplify the sound and play it through a speaker.
We couldn't find any VI that does that. Can anybody tell us how to play a wave file, or perhaps even send us a VI that can do that?
Thanks a lot for your help
Martin - Physical Optics Corporation

Hi Martin,
The only example that I could find on how to do this was using our
older Traditional DAQ drivers version 6.9.3. If you're using Traditional
DAQ drivers, the vi can be found here.
The example reads a 8-bit mono .wav file (an example .wav file is included in the .zip file) and writes it to the analog out of your DAQ card. I've updated the
example to work with our newer DAQmx drivers and attached it here.
I hope this helps,
Paul C.
Message Edited by Paul C. on 08-14-2007 05:47 PM
Attachments:
daqmx_wav_file_to_ao_output.zip ‏27 KB

How do you open jnlp files on the iphone?

How do you open jnlp files on iphone?

You don't. iOS does not, and never will support java.

Loading WAV file with the EXS

I created a new instrument in the options menu in the EXS24, then created a new zone, then clicked on the audio file option in the zone parameter box to bring up the option to select the audio file. I loaded the WAV sample in and when I play my MIDI keyboard I get the Default EXS sound and not the sample whats going on?

You have to:
- SAVE the instrument, giving it a name. The best workflow is to save the song as a project, then save all the exs instruments that you create for that song ("specific" to that song, like vocals for example) in the "sampler Instruments" folder that you will find inside the project's folder. If you bound to create more "generic" exs insts, then you can save them in the main Sampler Instruments folder (I've created sub folders named "my drums", "my bazz", "my fx", etc.)
- LOAD the inst that you've just created in the EXS (black and green slot)
You're done.
BTW... exs is not that intuitive, isn't it?

How do you import .WAV files into Presonus studio one pro on a Mac Mini

I am new to this type of forum and I don't know how to ask a good question but here goes. I have a Mac Mini and I am getting very frustrated with my presonus DAW software. I was able to import .WAV files int o my PC Real easy but I don't seem to be able to find out how to do it with my Mac Mini. I clicked on import files and the files would magically transfer themselves into my DAW on my PC, but with the mac it doesn't want to do it the same way. I E-mailed the software company but they told me to do lit just like I have been importing with my PC but it doesn't work. Any help would be greatly appreciated. I might also mention that this is my first Mac and I am not too familiar with the operating system yet, and besides all that I am fairly new to computer recording. Please help I am going nuts.
Thanks Abel

Convert the DVD's VOB files into a format that works natively in FCE. For DVD footage (which is SD), use MPEG Streamclip to do the converting. Here's a tutorial on using MPEG Streamclip: http://www.secondchairvideo.com/?p=739
MPEG Streamclip is freeware, but you may need to purchase the QuickTime MPEG-2 Playback Component from Apple if you don't have it already.
-DH

How do you rename multiple files at the same time

how do you rename multiple photo files with a name at the same time?

This would be an excellent use of Automator. Here is a link to some instructions on how to do this using Automator.
http://www.youtube.com/watch?v=Ie6zGxo2D-o
If you don't like that then Google "Renmame multiple files Automator" and you will find many tutorials available.

How do you move a file to the trash with ONE keystroke (Can't believe I'm wasting time on this!)

Everytime I want to send a file to the trash, I have to either perform some kind of key combination/shortcut or use the trackpad/mouse, right click and select "move to trash", or drag the file(s) to the trash! This is absolutely ridiculous. Why can't I just press the delete button??? I cannot take it anymore! It's such a waste of time.
After some research, I finally found a post with the answer I was looking for from user par larsson
Re: How delete a file in mac os x?
"You can also go into System Preferences and make a new keyboard shortcut. I turned one of the function keys into a "Move To Trash" key.
1. No need to use the mouse for something that should be simple and quick.
2. Single button press just like in Windows."
Seriously!
Now the problem is how do you do this?
1. I went to the system prefs > Keyboard > Keyboard and checked "use F1, F2, etc... as standard function keys.."
2. Under keyboard shortcuts, I selected "Application Shortcuts" and clicked on the "+" sign
3. I selected the finder application, entered "Move To Trash" in the action box, and F12 as the key (because it's next to "delete")
That did not work. It just opened the dashboard instead.
4. I went back to "keyboard shortcuts" and found F12 was already assigned to open the dashboard. So I unchecked it and tried again.
That still didn't work. I would select the file to be moved to trash, press F12, and after an error "beep" sound, the last file in the folder was highlighted.

Duuuuuuuuuuuuuuuuuuuuuuuude!!!!!!!!!!!! YOU DID IT! I cannot believe it!
I changed "Move To Trash" to "Move to Trash" and selected a file. I had lost all hope, so I took a minute to prepare myself for yet another moment of deep frustration. Then I pressed F10, and bang! the file was trashed!!! It took me a couple minutes to actually believe what just happened. Thank you so much! If I could, I would "like" you as many times as I can physically hit the "Liked" button!
PS: what the heck is wrong with Apple though??? Wrong instructions, incorrect help instructions on their own site. The chances of figuring this out before having a nervous breakdown were like one in a million (approximately, I did not actually do the math). Last week, the keyboard and the trackpad stopped responding on my brand new macbook pro for a couple hours. I was not the only one with this problem. Apparently, this was from a design flaw, which means it could happen again at any time. iMovie doesn't work. TextEdit keeps crashing all the time. Emptying the trash can take hours.
Since 2000, I bought a PMac G4 Quicksilver, a used PMac G3 Blue, a used iBook G4, a used Pismo PBook G3, a used Graphite iMac G4, a used iMac G3 (green, 233MHz I think) and I already had more problems with this brand new macbook pro than will all the other macs combined... For such an expensive machine, with 16GB of RAM, that's a little dissapointing, especially from Apple. Maybe I'm just not lucky.
Anyways, thanks again! Best moment of 2014!

How do you transfer video files from the iPad to a separate device?

How do I transfer video files from my iPad Air to a separate device or storage device so that I free up memory on my iPad

You can directly transfer photos and videos via WiFi between the iDevices, PCs, and Macs with an App like Photo Transfer.
See: https://itunes.apple.com/us/app/photo-transfer-app-easily/id365152940?mt=8
Or you can upload the photos and videos to the Dropbox service using the Dropbox App on the iDevice, PC, or Mac and download them to the another device using the Dropbox App on that device. By the way, once the videos are on Dropbox you can share them with others.
See: https://itunes.apple.com/us/app/dropbox/id327630330?mt=8

Can/How do you save excel files to the cloud?

How, if at all, can you save excel files to icloud?

I think you need to upgrade your MacOS. Mine is running MacOS X 10.8.4.
I am running Numbers '09 v2.3.
Need to sign on to iCloud under Mac Preference Settings.
When I start Numbers, I can view files stored on iCloud, or locally on the Mac harddisk.
Hope it helps.

How do you save my files from the recovery HD.

My Macbook keeps processing, so I went to the recovery hd amd mac os x utilitiles. from this point i am trying save my files so i can erase disk using disk utility. any ideas.

If you have an external hard drive, you can use the Restore tab in Disk Utility to copy the contents of one disk to another. Note that this will erase the destination drive, and may very well fail. You could also use the command line in the Terminal from recovery mode and copy files that way, but that requires knowledge of how to use Unix filesystem commands. You could also try connecting the Mac to another Mac via Firewire target disk mode and copy the data that way.
Alternately, if your Mac won't start up, you could try just repairing the hard drive with Disk Utility and then installing Mac OS X on top of your existing system. That will replace all the system files but leave your files and apps alone. (Of course, things can go wrong in cases like this, so making some kind of backups would be a good idea.)

How do you write a file involving the changes in application engine?

Hi Guys,
I have a requirement in app engine.
I have to update a table based on the changes occured in other tables.
I have to show the user old value and new updated value in the log file how do I write a file for below fields?
Old Value: Name:Rock|SSN:0000000|Address:675478
New Value Name: Roger|SSN:0000000|Address:908765
Thanks and regards,

Hi ,
My Requirement is Quite different here.
I cannot use CI.i have to implement in app engine.
Below explained:
I have data coming from abc table and populating into xyz table.
So if any field in abc gets changed which is extracted and populated in the xyz table.I have to show the old field value of xyz and the new field values of abc which I am going to insert into the xyz.
My log file should have both the values.
how do I write both the values and update it:
say I have value from abc.id=12 and xyz.id=12
when we update abc.id=13 and xyz.id=14
I have to print
old record details:
id=12
New record details:
id=13
somerthing of above sort
Thanks and Regards

How do you open Word Files on the 8330??

I can see the files on the card and open the music from the card, but it won't let me open the word files. Help!
"unable to view" is the error message I get

Docs to go will be in the Opearting System of the BB device, not on the Desktop software.
Unless you have OS 4.5 you cannot read the doc from either the media card or the device memory
Let me know if this helps!
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

How do you send a File from the Clinent End To the Server?

Hi, I'm jut learing Java and am tring to send a file from the Cleints end to the Servers' end, I know how to do this in Php, but its some what different in Java, i know where is a File Class which i can post the information into but for some reason it woudn't work
<%@ page import=" javax.servlet.*, java.io.File" %>
<%
String fullname, emailadds, genre, filename;
fullname = request.getParameter("Name");
emailadds = request.getParameter("email");
genre = request.getParameter("genre");
filename = request.getParameter("clip");
File file = new File();
file.isFile();
if (file.isFile())
out.print("File is true");
else
out.print("file ain't there");
%>
just as a tester i tried this to see if file is being read, but it won't compile
I keep getting this error sign! Have i missed out a lib or somthing?
\upload_jsp.java:52: cannot find symbol
symbol : constructor File()
location: class java.io.File
File file = new File();

Sham, dont show your anger... and dont use provocative words...
Now, coming to your problems.
your jsp/html should contain some thing like
<form action="/uploadServlet" method="post">
<input type="file" name="file"/>
<input type ="submit" value="upload"/>
</form>and for servlet code, refer to
http://forum.java.sun.com/thread.jspa?threadID=516176&messageID=2461686
or the easiest way would be to use 'commons-fileupload' api available on http://jakarta.apache.org/commons/

How do you save sample regions in the EXS24 instrument editor?

Hi There, I don't if my memory has failed me or something was changed in Logic pro 9 but I can't get a EXS24 instrument to save the sample region sections I set?? I open EXS24 click on edit, click on load zone, load a sample, click on edit in sample editor, set the region and then the new region doesn't set inside the EXS24 sample editor window? Tried saving the instrument, but it doesn't up date the selection? It just keeps the entire waveform as the sample? What am I doing wrong here? In the past this was really simple, you just moved the region on the sample area you want and the sample begin and end setting automatically update inside the EXS24 instrument editor window and then you just saved the instrument and each piece of the audio file as and how you set it was then on your keyboard ready to be used. Can anyone help me out here?
Thanks

Got it to work, seems I had to resave the audio file again... weird glitch...

How do you load wav files in the EXS24?

Similar Messages

Maybe you are looking for