How do you log values from RT target to the computer?

Hi,
I am using sbRIO 9633. How do you log values from RT target to the computer?
I created a shared variable on the RT target and used them on the log VI created under "My Computer", but I get error.
I get this error..
 \\192.168.1.140\temp deployment failed (error: -1967357949, IAK_SHARED:  (Hex 0x8ABC8003) Unable to query Measurement & Automation Explorer for the Shared Variable Engine. Make sure the Shared Variable Engine exists on the RT target and check that the network connection is valid.).
kdm

What are your data rates?  If you are producing data "continuously", you might find that Network Streams are easier and more reliable than Network Shared Variables.  In any case, you need an "engine" on one side (Host or Target) or the other.  I'm streaming 24 channels of 16-bit data from a PXI controller to a PC this way, with three other streams handling two-way messaging and transmission of "occasional" time-stamped data to the PC.
Bob Schor

Similar Messages

  • How do you text people from your phone on the computer? I tried icloud and it doesn't give me the option

    how do you text people from your phone on the computer? I tried icloud and it doesn't give me the option

    See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    B-rock

  • I have a 120gb Classic that has no space left on it. i am going to buy a larger gb capacity ipod as soon as i get clearer instruction on how to get the old ipod content to the new ipod. How do you get content from one ipod to the other?

    how do you get content from one ipod to the new one? my content is on an external hard drive not on my pc and i have run out of space on my 120gb classic. can you get old ipod content to new? my itunes has only got short cuts, the real content is on an external drive? can this be done?? please help

    If the content is on an external drive, but your library knows where to find it, then it should all work. Connect your device, make some selections for what to put on it, and sync. If, on the other hand, your current iPod is the only place holding some of your media then see this user tip: Recover your iTunes library from your iPod or iOS device.
    tt2

  • HT1473 How do you move music from itunes on a windows computer to an iPhone 5,  Music from my existing collection?

    How do you move music from itunes in a XP computer to an iPhone 5?

    You copy the content of your iTunes Library to the iPhone by connecting to the iPhone to your computer, using the USB lead that came wiht the phone, and allowing iTunes and the iPhone to Sync with one another.
    This will leave the content in your iTunes Library. An iPhone (or iPod) is not desinged to be the only location for your music (or other content). The idea is that the iPhone (or iPod) has a copy of the Library.

  • How do you download data from your macbook to the ipad?

    how do you transfer data from your macbook to the ipad?

    What data do you want to transfer ? Music, films, tv shows, photos and ibooks are done by syncing in iTunes (for which there is some help in the iPad manual which can be downloaded from here http://support.apple.com/manuals/#ipad). Documents can also be done via iTunes, but it depends upon the app and the transfer method(s) that it supports e.g. file sharing via the bottom of the device's apps tab on your computer's iTunes, via your wifi network, cloud services, email attachments etc
    Edit : have you got the Keynote app on your iPad, or any other app that supports keynote presentations ? Without a 'suporting' app you can't store a document/file on the iPad (unlike computers files have to be stored within an app)..
    Message was edited by: King_Penguin

  • I synced my iPhone with iTunes, and it deleted all my music on my computer and my iPhone except for what I'd purchased using the iPhone. The rest of my music is still on my iPad, so how do I get it from my iPad to the computer, and back on my phone?

    The rest of my music is still on my iPad, so how do I get it from my iPad to the computer, and back on my phone? All my music is sitting there safely on my iPad, but whenever I try to sync it with my computer the only option I get is to wipe the iPad and replace it with the files on the computer---which is only a fraction of what I had originally. How do I fix this?? It even deleted my playlists, and I now only have some 200 songs left out of what used to be over 1000!

    It can not do that all by itself.
    When you plugged it in, iTunes said 'Oh goody! You got a new phone! Would you like to make it just like your old phone?'...
    You explicitly said 'Yes'.
    You can't undo that.
    No backup of the current state of the new phone was made. It was wiped and the last backup of your old phone was restored to it.
    Anything you had on the new phone is gone.

  • How do you install programs from a disc onto the new Mac Book Pro?

    Can anyone say how do you install software from a disc/dvd onto the new Retina display Mac Book Pro?

    Maybe also this:
    DVD or CD sharing: Using Remote Disc

  • How do you move information from your sim to the phone memory? How do you move information from your sim to your iPhone ?

    HOw do you move information from sim to phone memory on iPhone 3GS

    in Settings/ Mail,Contacts,Calendar  there is an entry "Import SIM Contacts".

  • How do i sync music FROM my ipod to the computer

    I just upgraded to itunes 11, and all the music that was in the itunes library dissapeared from the itunes library, and Im freaking out!!!! However, the music that was there, is still on my ipod, so I was thinking that i can just sync it from my ipod to the computer.
    there was a time where i didnt have REAL music on my ipod. I would go on youtube and record it under voice memos. How stupid was that?! anyway, my music from another itunes library is there, and like i said, its not even music, theyre voice memos! how do i get rid of those and put the music thats on my ipod back in the library? A pro, please help!

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
    In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    tt2

  • How can I transfer music from my iPod to the computer?

    How can i get music from my ipod to my computer? My computer was messed up so I've had my ipod on another computer. Now its fixed and i want to know how I can get the library on my ipod from the other computer to join the one on this computer.

    Hi D1234
    Welcome to AD. Please refer to Jeff Bryan's post in the link before:
    http://discussions.apple.com/thread.jspa?messageID=8843966&#8843966
    Good Luck
    Garth

  • How to omit parameter values from exceptions thrown by the JDBC driver

    Is there a way to get the Oracle JDBC driver to omit the parameter values from the message when it throws an exception?
    We have an application that persists credit cards and when an exception is thrown by the driver, it's including the credit card number in the error message, which ultimately gets logged by the application. There are too many layers and locations, including OpenJPA, Spring, and our own application, where we'd have to massage the error data to remove that card number.
    For example, we get the following exception:
    Caused by: org.apache.renamed.openjpa.lib.jdbc.ReportingSQLException: ORA-20104: Permission denied
    ORA-06512: at "PROTEGRITY.PTY", line 57
    ORA-06512: at "PROTEGRITY.PTY", line 383
    ORA-06512: at "SUBSDSYS.TORDERPAYMENT_UPD", line 16
    ORA-04088: error during execution of trigger 'SUBSDSYS.TORDERPAYMENT_UPD'
    {prepstmnt 6603044
    UPDATE PAYMENT
         SET CARD_HOLDER_NAME = ?, CARD_TYPE = ?, EXPIRY_MONTH = ?, EXPIRY_YEAR = ?, GATEWAY = ?
         WHERE UIDPK = ?
    [params=(String) Test Test, (String) VISA, (String) 03, (String) 2012, (String) CREDITCARD, (long) 106901]} [code=20104, state=72000]
    at org.apache.renamed.openjpa.lib.jdbc.LoggingConnectionDecorator.wrap(LoggingConnectionDecorator.java:192)
    at org.apache.renamed.openjpa.lib.jdbc.LoggingConnectionDecorator.access$800(LoggingConnectionDecorator.java:57)
    The actual content of the message appears to come from the JDBC driver, not OpenJPA.
    This particular example doesn't show the card number, but only exposed that possibility as a risk.
    BTW: before you ask, for PCI compliance we're using a database layer service to encrypt the card numbers before they're stored in the table.
    Thanks much.

    [email protected] wrote:
    The actual content of the message appears to come from the JDBC driver, not OpenJPA.Wrong. This is a dump of parameters used to execute a query - and it comes from some upper layer, not the JDBC driver.
    I would start looking at the source code starting here:
    org.apache.renamed.openjpa.lib.jdbc.LoggingConnectionDecorator.wrap(LoggingConnectionDecorator.java:192)

  • How do you transfer music from your ipod to your computer? Need Help

    I kinda deleted my music from my computer. It's still on my ipod and i was wondering how you would get it back to the computer. WHAT DO I DO???<br>

    go to google and search for Ephpod. that is a software that is is like itunes but will show all ur music from ur ipod. if it works u can copy and paste all the music back to itunes. good luck and dont forget to make a back up folder after u fix ur itunes. if u have any more questions ill be on for a long time

  • How can you transfer iTunes from an iPod to a computer?

    I recently replaced the harddrive in my 12.1G4 and unfortunately also lost my back-up itunes file. How can I transfer the data from my iPod to the mother computer with the new harddrive? I have authorized the computer for my iTunes account, but itunes still shows the iPod is authorized to another computer.

    I have authorized the computer for my iTunes account, but itunes still shows the iPod is authorized to another computer
    iPods are not authorized or deauthorized.
    It tells you it is synced with another iTunes library and asks what you want to do.
    To copy the items off your iPod to iTunes, see this post by Zevoneer -> http://discussions.apple.com/thread.jspa?messageID=11646661&#11646661

  • How do you import songs from your phone into another computer im on home sharing but it wants to wipe my music clean off when i clink to sync?

    trying to sync my old phone into a home sharing laptop to update all my music but unfortunatley it just wants to wipe clean my iphone of all the music ive purchased over the last year - how can i update this new itunes with a few songs already on it - from my phone, without losing any songs?

    The iphone will sync itunes content with one computer at a time.  If you sync to another it will erase the current content from the iphone and repalce with content from the new computer.

  • How to pass a value from jspx page to the managed bean

    hi,
    i have created a jspx page and manages bean with page flow scope..
    in my jspx page i am searching a employee record from the data base . and getting entire employee details including 'status' as a search result.
    here i want to pass the value of 'status ' field to the managed bean variable called 'stval'.
    can anybody suggest any solution?.......

    As per the details provided in the post above, when the user clicks on the search in the af:query, the results are populated in the table. And you are interested in getting the value of particular column. This could be done by having the custom row selection listener to get the value of the current row (selected row in the table).
    1) Have a custom selection listener:
    <af:table value="#{bindings.EmpDeptVO.collectionModel}" var="row"
    rows="#{bindings.EmpDeptVO.rangeSize}"
    emptyText="#{bindings.EmpDeptVO.viewable ? 'No data to display.' : 'Access Denied.'}"
    fetchSize="#{bindings.EmpDeptVO.rangeSize}"
    rowBandingInterval="0"
    rowSelection="single" id="t1"
    partialTriggers=":::qryId1 ::ctb1 ::commandToolbarButton1"
    columnStretching="column:c1"
    styleClass="AFStretchWidth" columnSelection="multiple"
    first="0" contentDelivery="immediate" autoHeightRows="10"
    binding="#{pageFlowScope.ExampleBean.searchResultsTable}"
    *selectionListener="#{pageFlowScope.ExampleBean.rowSelected}">*
    2) In the method, set the current row programmatically:
    ADFUtil.invokeEL("#{bindings.EmpDeptVO.collectionModel.makeCurrent}",
    new Class[] { SelectionEvent.class },
    new Object[] { selectionEvent });
    3) Get the current row and get the required attribute values and set it in any of the variables in the managed bean:
    Row selectedRow =
    (Row)ADFUtil.evaluateEL("#{bindings.EmpDeptVOIterator.currentRow}");
    String status = selectedRow.getAttribute("Status");
    Thanks,
    Navaneeth

Maybe you are looking for