How do you magnify part of image in CS5

In the past, command-space will allow me to zoom in on a specific portion of an image. In CS5, the photo just blows up into an unviewable mess. Tried a search but can't find new shortcut to zoom in/out on a specific portion of an image. Sorry for asking something that I know should be easy. I googled and found that I shoud select zoom tool. Got that part but I can't draw a box around the specific area I want enlarged. Thx.

Here are the methods I use to zoom in and out:
- Command + or Command - to zoom in/out incrementally.
- Hold Option key and use scrollwheel.
- Use zoom tool (or Command-space) and click and drag around area to enlarge.
If I need to do a lot of back and forth, I usually open a second window for the document (Window > Arrange > New Window for ...) and keep the windows side-by-side. I zoom in closely in one window to do fine editing and view the result in the second window.

Similar Messages

HT3386 How do you remove part of a file. My thumbnail attach themselves then refuse to allow editing without deleting my complete work. I even scan in jpegs of my documents and it incessantly adds blanks I can't remove.

How do you remove part of a file. My thumbnail attach themselves then refuse to allow editing without deleting my complete work. I even scan in jpegs of my documents and it incessantly adds blanks I can't remove.

Pages documents are organized in sections. When you click on the thumbnail for a page, the section containing that page is selected. The Delete command applies to the selection, so if you press delete at this point, the selected section is deleted.
You can separate a section into two or more sections by inserting a section break at the end of the page before the page you want ot be the first in the new section, then inseritng a second section break where you want the second section to end. Click on the thumbnail for any page in the new section, thenpress delete and the new section will be deleted.
If desired, you can then reconnect the two remaining sections into one by deleting the section break between them.
An alternate is to select any floating objects on the pages you want to delete, then press delete. After that, select the text on the pages you want to delete, then press delete.
If all objects on these pages (and al objects on pages following these pages) have been placed as Inline objects, this deletion may be done in a single step. Floating objects placed below the deleted material will maintain their position relative to the top left corner of the first page of the section,m and will not be in the same place within the text as they were before the deletion.
"I even scan in jpegs of my documents and it incessantly adds blanks I can't remove."
If your jpegs are inserted as inline objects, each will be treated as a single, large character in the text. You will see the same space left and right of the object as you would create by increasing the height of one character in the line of text to the same size as the height of the jpeg image.
If they are inserted as floating objects, then depending on the Wrap settings, they may force text out of the space to the left, right, or both sdes of the object, as well as forcing a small gap above and below the object. If the scan includes excess white space around the graphic, this white space will be included as part of the object
Regards,
Barry.

How can you get a mirror image of a photo on iPhoto?

How can you get a mirror image of a photo on iPhoto?

By using an external editor. Preview is already on your Mac. It's called 'Flip Horizontal'
In order of price here are some other suggestions:
Seashore (free)
The Gimp (free)
Graphic Coverter ($45 approx)
Acorn ($50 approx)
Pixelmator ($50 approx)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate or the App Store.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

How can you delete part of a message not the whole conversation?

How do you delete part of a message from a conversation on the new upgrade? You used to be able to click on the text, ticking it and then hit trash but thats gone. Please help!!

click and hold on the bubble, you will now see "copy/more" select 'more'
you can now choose which bubbles to delete by selecting a check mark next to them and then hit trash can

How do you display a new image in webdynpro view?

How do you display a new image in webdynpro view?
Where is the image stored and how do we specify the image path?

hi ,
The UI element Image enables you to integrate graphics into the Web application in a format that is processed by the Web Server u2013 for example, GIF, JPG, and PNG format. Height and width of the graphic can be specified using the properties height and width. The graphic is displayed without borders.
saveur image as mime
with Mime Objects u cn upload doc , jpeg, or giff files from our local system into the webdypnpro system .
Right click on ur component->mime object->import
In the transaction sicf/bc/webdynpro , u cn check your component name there you can view the mime objects created by you .
also refer the SAP online help :
http://help.sap.com/saphelp_crm50/helpdata/en/46/bb182fab4811d4968100a0c94260a5/content.htm
to knw more abt mime repositories.
http://help.sap.com/saphelp_nw04/helpdata/en/f3/1a61a9dc7f2e4199458e964e76b4ba/content.htm
regards,
amit

How do you weed through duplicate images?

I love that Aperture allows tasks to be done many different ways. I'd like to hear some ideas on how to do this -
I am going through and finally getting my old photos from 2002 to current managed in Aperture. Many of the images are a mess on CD backup and more recent images are from the pc (I could get these from an EHD or in iPhoto). Long story short, I have LOTS of duplicate images from one disk to another. I mean the same photo two or three times.
My library has a top blue folder for the year. The projects within there are almost all by month year (i.e. Apr 2003). As far as I can tell, all of these images are the same - but one project might have an image that another one doesn't have. Should I worry about this or not? I am very detail oriented and anal about it - so set me straight if I need a slap into reality
Should I just go through my library and view by date and delete the duplicates without regard to which CD they came from? What would you do? How do you weed through duplicate images in this regard?
I'd love to hear your thoughts!

I almost thought you hit a winner there... even for general use. I started to read it and realized the import window cannot be resized. Why did I think that? Well, in general, have you ever imported from your camera and then took more pictures? Do you always remember what the last downloaded image was? Wouldn't it be great to resize that import window and see the actual library underneath to check??!
Anyway, my imports are done so .... last night I did a few months worth and I was in date view within 2003 (not the smart folder at the top under Library) and went through using the 9 key to reject the images that were duplicate. Some of them I could go to the project and reject in larger groups, but mostly it was one by one. It is a painstaking process, but ensures I have every image. Once I know I have it all, I will delete the rejects.
Keep in mind - my duplicates are not in the same project - they exist in multiple projects, sometimes two or three.
No other tips out there? I was sure there were enough power users that would have some secret tip to make life easier with Aperture.

When making a photo book in Aperture. How do you eliminate having the image numbers under the pictures?

When making a photo book in Aperture. How do you eliminate having the image numbers under the pictures?

Click the "Book Actions" cogwheel and select "Page Numbers " -> "Off"
Regards
Léonie

How do you print multiple different images on a single page in preview

How do you print multiple different images on a single page in preview?

Chances are no one who saw your question knew the answer.
Unless you're willing to share the answer you found here, then anyone else like you searching for the problem who comes across this thread will also be unable to thank you for providing the answer too.

How do you connect parts of a split clip?

How do you connect parts of a split clip? I unlinked audio from video, split the ambient audio and removed some unwanted background noise. I now need to connect the two parts of the audio and stretch to match the length of the video portion. I don’t want to stretch just one part of the audio; I need to stretch the entire audio clip so that it is uniform. I am using APE12.

Thanks for such a quick reply. I was shooting footage for a soothing background: gently rolling waves washing on the shore, with the sound of the water. In the middle of the clip, some voices were audible. Everything was timed, so it wasn't practical to just cut out the middle of the video. (In addition, this would leave a visual hiccup due to the motion of the sea.)
So it seemed like the best and easiest thing was to cut out only the bad audio (only a few seconds) and then extend the duration of the remaining audio track to match that of the video track. This was easy using Time Stretch, however this method only extended the portion of the audio track prior to the cut, leaving one portion at original speed and the other at 96%. In other words, the audio track is the same length as the video track, but there are two slightly disparate parts to the audio track--one a bit slower than the other.
Now in this particular case it's not terribly important, since the sound of waves is pretty amorphous, and a slight difference between the two parts (96% vs. 100% of original speed) is not going to be noticed. But I would prefer to have a method that would work when such things do matter.
What would be really nice would be the ability to
1. Remove the corrupted audio
2. Fuse/join/recombine the two audio portions
3. Stretch the entire new audio track to match the length of the original video track.
Message was edited by: Kawika808 today is typo day!

How do you magnify small writing with os x maverick? I have a imac

How do you magnify small writing with os x maverick? I have a imac. Perviously i would push control and the mouse .

Control scroll should still work in Mavericks, it does for me.
In addition, Safari can also be Zoomed in to varying degrees by using either View Zoom In or the Command +- keys.

How do you create a still image from a video using IMovies 11?

How do you create a still image from a video using IMovies 11 on a Pro Mac?

The simplest way is to do a simple screen capture.

How do you print a mirror image?

How do you print a mirror image?

Or in the elements print window in older versions there's a checkbox right there. in the "improved" print window in recent versions it's under the more options button>printing choices>iron-on transfer>flip image.

How do you save a transformed image?

Windows Store App 8.1.
I have an image that the user has rotated, scaled and clipped etc. How do you save the transformed image?
There are solutions of the forums but these use the System.Media.Imaging library that isn't available, classes like the TransformedBitmap etc. are not available.
I'm playing around with this approach but the decoder throws a "The image format is unknown";
imageManipulation is UIElement.Image.
Any ideas on how to achieve the saving of a Transformed image in a 4.5.1 8.1 store app?
RenderTargetBitmap rtb = new RenderTargetBitmap();
await rtb.RenderAsync(imageManipulation, (int)imageManipulation.ActualWidth, (int)imageManipulation.ActualHeight);
IBuffer buffer = await rtb.GetPixelsAsync();
using (InMemoryRandomAccessStream ras = new InMemoryRandomAccessStream())
await ras.WriteAsync(buffer);
await ras.FlushAsync();
BitmapDecoder dec = await BitmapDecoder.CreateAsync(BitmapDecoder.BmpDecoderId, ras);
Rob

Hi,
You can use BitmapEncoder to apply transforms such as scaling and cropping, set metadata and properties, and edit pixels while preserving any unedited
data. After transform the data, you can copy the contents from the in-memory stream to the original file’s stream and close all of the streams. That make you can save the encoded image to the file:
memStream.Seek(0);
fileStream.Seek(0);
fileStream.Size = 0;
await RandomAccessStream.CopyAsync(memStream, fileStream);
fileStream.Dispose();
memStream.Dispose();
You can see the link to get more information:
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/jj709937.aspx
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

How do you set a background image in Pages?

I have a simple question. How do you set an image to be the background of a Pages '09 document? How do you put a JPG image behind your regular body text? Surely it's possible, but I can't figure out how to do it.

You just didn't took care to the status of your picture.
It was an inline one
Change its status to floating and the menu item is no longer grayed.
This kind of features are described in Pages User Guide which is also for you
Yvan KOENIG (VALLAURIS, France) mercredi 13 juillet 2011 22:40:00
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

In IDCS3 how do you print part of a page?

I use IDCS3 to create large graphics, 48"x96" and larger. I always need to print a section of a graphic to proof in color on an 8.5 x 11 color printer. This is easy, oddly enough, in the sister application Illustrator. You get a thumbnail image in the print dialog and you can pan the page area around to print exactly what you want. For no good reason, this feature seems to have been left out of IDCS3. I can't imagine that Adobe felt it was essential for AI, but not for ID so I assume that there must be a way to do it that I'm missing. Please don't ask me to tile it. First, there is no way to tell which tile is correct and second, I don't want to print the entire document on 100-plus pages. I just want to print one. I'm assuming it works like AI somehow, I just can't find it. Anyone know how to do this very fundamental thing? I know it is going to be simple, but I'm willing to risk embarressment to save paper.
Thanks,
MGuilfoile
CS3

Peter, using manual tiling would work except that the print dialog box in ID does not show a thumbnail of the image (like AI) and I don't think it allows you to move the tiles around the little white rectangle that it does give you (again, unlike AI.) I haven't used tiling before, do you mean that the tile manipulation occurs on the actual layout? If not, then I have to count rows and columns of tiles and then try that again on the print dialog page where the page icon is the size of a postage stamp. Remember, I'll have around 100 tiles to pick from! It sounds like it wiill work, however, and I appreciate all the help. Still, it is maddening that this sort of thing comes up again and again where one part of the "suite" has a feature that is nonexistant another.

How do you magnify part of image in CS5

Similar Messages

Maybe you are looking for