How do you make a 3d octagon in photoshop cs4 extended?

How do you make a 3d octagon in photoshop cs4 extended that you can map artwork to? I've been searched online for a solution that doesn't involve using a 3D program but can't find anything. Can't you extrude a shape like in Illustrator, or exporta true 3D shape from Illustrator that will work? I'd use Illustrator but the mapping thing is finicky, and doesn't alow wrapping images around angles. (now someones going to say: "Don't mention any other programs in a PHotoshop forum!" Yeah yeah, there should be a forum then about using different Adobe programs together.) End of rant, any suggestions much appreciated.
Thanks,
Mike

Thanks for your prompt response!
Suggested Bridge Update
It turns out that I got a message that this update had already been installed, which led me to more carefully look at the Bridge window and (finally) see that the Output module had a Quality dropdown: Full, 300 ppi, 150 ppi, 96 ppi and 72 ppi. Thanks! I decided to compare the CS4/Bridge results to those I got in CS2 with its convenient File/Automate/PDF Presentation/Multi-Page Document routine that I like.
My project was an 8-page PDF made from scanned pages of handwritten notes into which some fairly small type had been insert using the Photoshop CS2 Type tool. In Photoshop CS2, I had settled on "medium quality" JPEG compression as giving a "reasonable" file size (about 7 MB) and "very good/excellent" image quality. I experimented with making the PDF in Bridge, using all five Quality levels. See table below. The Bridge "good minus" file was about the same size as the file produced in CS2, which I judged to be "very good/excellent" and slightly better visually than the 300-ppi, 23.5-MB Bridge file.
Bridge Quality:
Full
300 ppi
150 ppi
96 ppi
72 ppi
File Size:
25.2 MB
23.5 MB
7.6 MB
3.2 MB
2.1 MB
Subjective Quality:
Very good
Very good
Good minus
Poor
Useless
I appreciate that you may not be all that interested in these observations, but it seems to me that Adobe has done us no favors in the multi-page PDF department in going from CS2 to CS4!
Install the Old Contact Sheet/Picture Package Plug-Ins
I had already done this some time ago, in order to get in CS4 the File/Automate/Contact Sheet II feature I liked in CS2. It does not appear to me that this plug-in has anything to do with make multi-page PDF's. Perhaps I'm missing something.
Again, thanks for your response!

Similar Messages

How do you make the smallest pdf from InDesign CS4 but retain some sharpness?

I have a 2 page brochure, front and back with layered photoshop files and when I make the small pdf I need to make a 100kb file like a client has done in the past. The smallest I can make the pdf file is 460kb. It will not go smaller no matter what I do. Of course I can enter final resolution as 72 dpi but the photos become very fuzzy. I have even reduced the file sizes of the photos and replaced them in the document. The file size remains the same. My client said that Illustrator reduced the size for him smaller in the past but I don't think that is the solution. How do you retain some sharpness in a pdf but keep the file size at a very minimum?

But InDesign CS4 outputs the file no matter what at 460 kb for me.
Still don't know why they got 100 kb.
By not using InDesign. Scott is on the right track by mentioning Distiller - which makes PDFs that are smaller than what InDesign can export. Illustrator can be used (improperly*) in the same way. Both methods can strip out stuff that you don't need if you don't care about printing quality, don't care about reliable display across multiple platforms, don't care about precisely how your fonts are embedded, don't care about the lawsuit that the blind people using screenreaders are going to bring against you, and so on. I don't know which of the above is not in your client's 100k file, or which of the things in my above list will be stripped out by using Distiller or Illustrator, but I bet that one of the people who has already posted in your thread does know, and might be talked into telling us.
But, if you're trying to make your client happy and aren't actually personally invested in making the smallest PDFs known to man, and if you're located in the US, then perhaps the phrases "screenreaders... blind... accessibilty... lawsuit" spoken together might induce your client to rethink this arbitrary desire for miniscule file size of PDFs.
Alternately, you could just save postscript out of both PDFs and just look at the .ps files in your favorite raw-text viewer.
* I'm surprised that Adobe Employee Dov Isaacs hasn't come along to tell us what a bad idea this is.

How do you make a .ico file in Photoshop CS6?

I used to use a plugin in previous versions, but the file formats sub-directory is missing from the plugins directory. See screenshot :
Surely this should be possible in CS6 (extended even) straight out of the box given that every web developer on the planet needs to make loads of these ...

I read this thread today to try and place the .ICO plugin in the plugins folder.
It didn't work for me either. However.... I found for some reason when I installed CS6 on to my 64bit PC.... it has installed it in two different places.
The first place I tried was in the [Progam Files x86] - seems the right place...right? Not so, for some reason.
Whereas... I found a Photoshop CS6 file in [Program Files] folder too. Popped the plugin in there.... and it worked.
Not sure why I have two installs...? but hey it works.
Cheers to those with useful comments.
#rolleyes at those who didn't.
Thanks folks.

How do you make a movie clip play in CS4

Hello, I used Flash MX a long time ago (beginner level) then
left it for years. I'm now using CS4 and am stuck. I have a stage
with a movie clip placed onto it. I want to create a simple 'click
to play' button so that the movie clip only plays on click of this
button. Can someone please give me a step by step (idiot-proof)
guide on how to do this please

Cases that use to be _property in AS2 are now just property
in AS3. So _x is x, _y is y, and _visible is visible. This should
work:
function showPlay(event:MouseEvent):void
play_text.visible = true;
pause_text.visible = false;

How do you make a web browser?

I would like to make a Web Browser of my own but how did you make FireFox?

Read this:
http://thepattysite.com/window_sizes1.cfm
You don't want to try to launch your site to full screen,
honest, as you'd
drive your (potential) visitors away.
Jo
"Steve Zavodny" <[email protected]> wrote in
message
news:escrfa$s7$[email protected]..
> How do you make a web browser launch your site to a
specific size or even
> full screen?
> Thanks...

How do you make superscripts and mathematics in Preview's text annotation?

When adding text annotations that include scientific notations, how do you make superscripts, e.g. "3.2 × 10^{-23}"?
Searching Help for 'superscript' turns up nothing, suggesting the command does not exist, as it does under Baseline etc. in iWork. Please tell me this is not the case! If it is, has the situation been improved in the new operating system?
A related issue: I wish to include other mathematics -- is there a way to include mathematics similar to LaTeX? Might Preview incorporate using latex code in the future, so I can easily type "\exp{-\lambda t}" etc and have the math appear?
I'm adding text annotations to PDF lecture notes in Preview, basically filling in blanks the instructor has left so students will pay attention in class, and these annotations include superscripts; I wish to format properly.
Thank you!

Once you have the circle shape displayed, long press on the border of the circle. Once it is highlighted, drag horizontally or vertically. This should allow you to distort the circle into an ellipse (or the square into a rectangle).
Hope that helps,
Frank
Sketch Engineering

How can you make one button preform different actions in Xcode?

How can you make one button "preform a click" and "orderfront"? Is that possible? Because what I am doing is making a welcome window to my application for Mac OS X 10.6, and I have two buttons in that window, one says "Connect" which connects a a WebView to a url and the other button opens up the main window. So how can I a make a button do multiple things at once??

Ah - If you are just using bindings between various objects from Interface Builder, you can reduce your application code a bit (sometimes quite a bit), but there is only so far you can go. Typically variables and routines are defined in your application that Interface Builder hooks into, so that your application code (usually Objective-C, but can be others) can use these variables and routines to determine what is happening in the user interface.
I'm not sure how up-to-date the project code is (or what programming code you are familiar with), but you can take a look at Apple's Cocoa Application Tutorial to see what is (usually) involved in creating an application.

How can you make the iPod tell the diff between a movie and music video

Greetings!
How can you make iPod tell the difference between a Music Video and Movie? Everything I put up on the iPod falls into Movie. So is it something I have to do in iTunes?
Thanks for the help!

Rightclick the video in iTUnes, hit Get info then the "Options" tab. Beside kind you can set it to movie. music video. or TV show

How do you make the sentences you input in a drop down list wrap to the next line?

How do you make the sentences that you input in a drop down list to wrap to the next line?

You can't.
see this thread for more info: Can you set drop down list as multi-line???

HT204053 I have multiple devices used by family members, how do you make sure the kids don't see Moms messages from Dad and visa versa?

I have multiple devices used by family members, how do you make sure the kids don't see Moms messages from Dad and visa versa?

Hi Roger:
Thanks for the reply. I think I figured out the problem. Apple has confused (at least in my mind) the different IDs that people can have. In the iCloud settings, they use the term Apple ID and not iCloud ID. I guess there really is no such thing as an iCloud ID. There are Apple IDs with various attributes. This is not clearly explained or easy to see (how could I look up to see if my Apple ID is associated with iTunes for example?).
I created, what I thought were iCloud IDs for each family member, but we all use my Apple ID for iTunes.
One other question - why does the syncing of Notes using iCloud require an @me.com email account. That makes no sense to me.
Thanks for your help!
AO

How do you sync iCloud (contact, calendar, task) to outlook 2011 for Mac? and how do you make seemless sync between iCloud to Outlook 2011 to Blackberry device or an iPad?

I have three device: Macbook Pro (OSX 10.7.5) for work; an iPad and a Blackberry for mobile. I used mail, iCal, and Address Book combine with mobileme (iCloud) to exchange data such as contact, calendar and task from my Mackbook Pro to my iPad but never to Blackberry. The problem is my boss was asking me to change to Outlook 2011 for Mac because some of the email that I sent from Mail did not appear in my client's Blackberry. So how do you sync iCloud (contact, calendar, task) to Outlook 2011 for Mac? and how do you make seemless sync between iCloud to Outlook 2011 to Blackberry device or an iPad?
Best regards,
W. Sasongko

More Like This --------------------------------------->

How do you make a MacBook Pro talk to an Epson printer?

MacBook Pro
OS X 10.6.8
(Thinking about getting another MacBook)
I had an Epson Artisan printer, got an Epson Workforce WF-3640 new in Jan, hardly used because I cannot make it do what I want it to do. Wireless connection is good.
With the MacBook Pro, the interface with the Epson printers is not what it used to be on the G4: no ColorSync, no 2-sided, no thick paper, none of those kinds of instructions appear on the generic printer control panel. Which by the way, bears NO resemblance to the Epson manual screenshots, and the instructions in the Epson manual are useless.
How do you make a MacBook Pro talk to an Epson printer? And by the way, I cannot use the scanner either. I have to set up a document to print, then when the printing progress box appears, click on the scanner icon.
Also
Printer has 2 compartments. Top compartment #1 for all types paper.
Bottom compartment #2 for plain paper only.
I load glossy photo paper in #1, it prints plain paper from #2 even though I entered instructions on the control panel on the printer.

If you haven't done so already, try resetting the printing system.
Reset Printing System

How do you make an array of image icons and then call them?

How do you make an array of image icons and then call them, i have searched all over the internet for making an array of icons, but i have
found nothing. Below is my attempt at making an array of icons, but i cant seem to make it work. Basically, i want the image to match the value of the roll of the dice (rollVal)
Any help would be greatly appreciated, some code or link to tuturial, ect.
/** DiceRoller.java
* Roll, print, Gui
import javax.swing.*;
public class DiceRoller extends JFrame
     private ImageIcon[] image ;
     public String[] images = { "empty", "dice1.jpg",
               "dice2.jpg", "dice3.jpg", "dice4.jpg",
               "dice5.jpg", "dice6.jpg" };
     public Dice die;
     private int rollVal;
     public int rollNum;
     private JLabel j1;
     public DiceRoller(){
          j1= new JLabel("");
       die =new Dice();
       int rollVal;
       rollVal = die.roll();
       image = new ImageIcon[images.length];
     for(int i = 0; i < images.length; i++){
      image[i] = new ImageIcon(images);
     if (image!=null){
          j1.setIcon(image[rollVal]);
     System.out.println("Roll = "+die.roll());

Demo:
import java.awt.*;
import java.net.*;
import javax.swing.*;
public class IconExample {
    public static void main(String[] args) {
        EventQueue.invokeLater(new Runnable(){
            public void run() {
                launch();
    static void launch() {
        try {
            Icon[] icons = new Icon[6];
            for(int i=0; i<icons.length; ++i) {
                String url = "http://www.eureka-puzzle.be/cast/images/dice" + (i + 1) + ".jpg";
                icons[i] = new ImageIcon(new URL(url));
            display(icons);
        } catch (MalformedURLException e) {
            throw new RuntimeException(e);
    static void display(Icon[] icons) {
        JPanel cp = new JPanel();
        for(Icon icon : icons) {
            cp.add(new JLabel(icon));
        JFrame f = new JFrame();
        f.setContentPane(cp);
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.pack();
        f.setLocationRelativeTo(null);
        f.setVisible(true);
}

How do you make the background of an object transparent in Adobe Illustrator?

Hello Forum.
How do you make the background of an object transparent in Adobe Illustrator?
I have been having issues with using the Magic Wand tool in Adobe Illustrator as well as the lasso tool.
Basically, I am trying to put a small graphic into a new Illustrator file.
The first thing I tried to do is to use the magic wand tool. But I found out that this did not work on a jpeg image since it did not have any individual objects to select.
So I tried something new. I opened the file in Adobe Photoshop and used the lasso tool to select an area. Then I coped this area. Then I tried to paste it into Adobe Illustrator. But the background was not transparent for the pasted image.
How do I make the background transparent.
I made this small video to show what I am talking about:
http://youtu.be/2LgMGEF6z10

Don't Copy/Paste the image.
Make it transparent in Photoshop, save a PSD and place it in Illustrator

How do you make room on your start up disk. i am trying to do the update but don't have enough space

how do you make room on your start up disk. i am trying to do the update but don't have enough space

Try this:
1. Open "Finder", then navigate to "Movies" on the left side. Click on "iMovie Projects"
2. Move desired movies and clips to trash, or your flash drive.
*PS* Its dangerous to have a full hard drive, I would recommend either trashing, or transferring files to another computer. Trash applications you no longer use as well.

How do you make a 3d octagon in photoshop cs4 extended?

Similar Messages

Maybe you are looking for