How do you make a clip move on a frame
how do you make a clip move on a frame
777
It is not clear what you are asking about. Could explain another way?
Please start with what version of Premiere Elements you are working and on what computer operating system it is running?
From what you wrote, I am not sure if you are saying
a. The Timeline Indicator is stuck and will not more from left to right when you try to play back the Timeline content in the Edit area
or
b. You want to create an animation
or
c. You are doing a Picture in Picture (PiP) and want the picture (or video insert) to move to different locations within the frames over the course of
time.
or
d. Other
We will be looking forward to your clarification with details so that we can give you the information that you seek.
Thank you.
ATR
Similar Messages
-
How do you make a clip slow down
I'm new to final cut so I hope this question(s) isn't too naive. First of all I have imported a clip that has a world turning right before a transition into something else I don't want (ie I only want the world spinning). But whenever I select the range I want, and remove the rest, if drag the desired clip longer the old (unwanted material shows). So clearly I'm not cutting or deleting properly. Assuming I have the clip I want, the other problem is that I'm trying to match it to audio which is considerably longer (like 6 minutes versus 40 seconds). There is no obvious place to cut and make a copy (loop) without it being noticeable, so I thought it might be better to simply make the clip run in slow motion and match the duration to the audio clip. How do you do this?
Simple. Select the clip (or portion of the clip) you want to slow down. Go to the "Modify" menu, then go to "speed." Type in a new percentage (50%, for instance, will make the clip run at half speed). I also suggest checking the "frame blending" box....it should make the slowed-down clip look smoother (you can try it both ways and see what looks best to you). Then render the clip (from the "Sequence" menu) and you're done.
-
How do I make a photo move in a frame mask?
I have a photo of mountains that I want to pan slowly,
contained in a rectangular mask. I've got the photo moving okay,
but have not been able to make a mask layer make the 'hole' that I
want to contain the image as it moves.
How can I make a mask that will contain this animation? I see
there is an Adobe tutorial on just the opposite - making a mask
move while the image stays still, but that technique does not help
me do the opposite.
Any info or link to a tutorial would be appreciated.
TIA,
KenPlease repost in the Aperture forum, I am sure someone there will be willing to help. You also may simply just want to look at this Apple video that explains book printing:
http://www.apple.com/aperture/resources/print-products.html#overlay-books -
How do you make a hd movie to a sd movie
My movie isn't going to go on my ipod nano
Two options:
The simplest way to do this if you have a "Smart TV" (the TV will have a USB connector) is to export the Keynote as an H264 file, Share > Export > QuickTime then copy this to a USB memory card plug it in to
the TV and play.
If the TV doesn't have USB, export a QuickTime video and create a DVD disc using a DVD video application; Toast, iDVD, DVD Studio pro. -
Sorry I'm new to Final Cut Express. How do you make an image (jpeg file for example) move across the screen slowly as I've seen in many films.
Neil from bristol wrote:
… How do you make an image … move across the screen …
by setting KEYFRAMES
(read, what FC/e's built-in Help-feature tells about it)
resize and set pic to start position
set keyframe
move playhead in timeline to desired length
set pic to end position
set keyframe … -
How do you make a movie clip face the mouse
How to you make a movie clip rotate so it's always facing the
mouse?thanks a lot! I got the code to work, I just modified it a
bit. -
How can you make the iPod tell the diff between a movie and music video
Greetings!
How can you make iPod tell the difference between a Music Video and Movie? Everything I put up on the iPod falls into Movie. So is it something I have to do in iTunes?
Thanks for the help!Rightclick the video in iTUnes, hit Get info then the "Options" tab. Beside kind you can set it to movie. music video. or TV show
-
How do you make clips go in slowmotion and play reversed using imovie 08
how do you make clips go in slowmotion and play reversed using imovie 08
as owner of iM08, you're entitled for a free download here:
http://www.apple.com/support/downloads/imovieHD6.html
Plan B) using a designated 'slow mo' software, link, demo and how-to on my site:
http://karsten.schluter.googlepages.com/slowmowithim08 -
How do you make movies sent to you tube accessible to mobile devices
How do you make movies that are sent to you tube accessible to mobile devices
hey there,
Do you mean that you want to play some youtube videos on your mobile devices? If so, that would be really easy.
As to most of the codec problem, a video converter can move away your troubles. And since almost of the current video converters can support all video format file input, you can use it in most codec cases.
tips for you, most of the mobile devices support .mp4 best. In this case, if your device's name isn't in the output format list, you can just choose the output format as MPEG-4.
here's the guide of the one i used to use, wish that can help you. Good luck~ -
i'm attempting to download a movie and it is stating the disk is full i am attempting to use. How do you make space?
Delete something
-
how do you make room on your start up disk. i am trying to do the update but don't have enough space
Try this:
1. Open "Finder", then navigate to "Movies" on the left side. Click on "iMovie Projects"
2. Move desired movies and clips to trash, or your flash drive.
*PS* Its dangerous to have a full hard drive, I would recommend either trashing, or transferring files to another computer. Trash applications you no longer use as well. -
How do you make movieclips return to frame one when mouse no longer over a button?
If you like, please see the attached file. I have an instance of a movie clip on the stage that jumps to different labels (within the movieclip) when the large buttons at the top of the scene are in rollover state. The problem is that it stays there when the mouse leaves the button.
How do I make that symbol go back to frame one (not there) within the movie clip so that it disappears when there is no activity on the buttons?
Is there a button parameter like MOUSE_OFF (I know that's not one)?
Thanks, Danuse a MouseEvent.MOUSE_OUT listener.
-
How do you make images transparent in inDesign?
How do you make images transparent in Adobe InDesign CS5.5?
Dittco wrote:
It IS possible: Select the image. Open effects (Window > Effects). Switch from "normal" to "multiply". Viola! White background is gone.
That only works with a white background. In addition, it introduces a transparency effect, with its associated problems.
With a rather light background: Select the image. Open clipping path (Object > Clipping Path > Options). Select Type > Detect Edges; use Threshold and Tolerance to get as close as possible to the edge of your image. This may be difficult because of a too low resolution image, or too much fringe on the edge -- if all fails, use the Inset Frame value to force the mask "into" the image. Click OK, and the background is gone.
But that's not the only way: you can always create a clipping path manually, and then you are in total control, not limited by transparency side effects, auto-edge detection, and busy backgrounds. -
Hi Everyone, how do you make adjustments to many pics at once
Hi Everyone, how do you make the same adjustment to many pics in one go? Tried select All, and then adjust, but that only does the original selected pic..
First of all, make sure, tat the "Primary only" flag is not enabled. (Edit menu > Primary only).
Then rotate, clip, keywords will be applied to all selected image versions.
Only the adjustments applied from the Adjustment panel will still only be applied to the primary selection. But you can use the "Lift&Stamp" tool to transfer all adjustments from an edited image to all selected images at once.
The "Lift&Stamp" tool to the left, the "primary Only" button to the right.
Keywords or ratings are applied only to one of the selected images - why? -
Just got CS4 for the Mac, and I'm trying to figure out something I remember doing a lot in CS2: how do you bump a clip (or group of clips), like 5 or 10 frames in either direction? I forget even the technical term for this. I have a lot of short clips I have to move back and forth, and a keyboard shortcut to quickly move them would really be handy.
Alt - >
or Shift - ALt - >
on PC
Maybe you are looking for
-
How can I read content in Gujarati language from website?
I unable to read content in Gujarati language in any website. website like WWW.ojas. guj. nic. in
-
Need my conformation details send to my email address please
I order a all in one officejet pro 8610 printer but i order it over the phone and the representitive who made the ordr put in the wrong email address and I Need my conformation details send to my email address but the thing is once I've made the purc
-
Corrupt Contacts File in Photoshop Elements?
I recently converted from Photoshop elements 8 to elements 11. In elements 8, I found that I couldn't add or delete any contacts info, even when I tried to do it manually. I just converted to elements 11 and am having the same problem. Can anyone
-
Can´t start up program in win with a usb-dongle
Unfortunatly I have to run a program in Windows (made only for win), Wings Platinum. The program need a usb-dongle connected to start (for preventing piratecopies). However, the usb-dongle is not recognized in windows. I have Paralell Desktop install
-
How to restore a single file form a time machine backup to another system?
i have changed from macbook to imac. don't like to use migration assistant. however i forgot to backup the file: home directory/library/preferences/com.apple.mail.plis is there a way to get this file out of the timemachine backup (which was done on t