How do you make a custom profile picture?

So how do you do it?

You can upload a custom avatar when you reach level 3 support status - 500 points. You can receive points if the original poster marks your response as helpful (5 points) or correct (10 points).

Similar Messages

How do you make a custom button that is Invisible When not selected

Im just recently switching over to using a mac for authoring. I really like all the features in DVD Studio more than what i was using on a PC for the past 6 years. Which was ulead DVD Workshop 2.
The only problem im having (For Now) is that i cant make my custom buttons invisible. I made this little black shape thing in photoshop and i want to use it in DVDSP for selecting different tracks.
I thought all i had to do was just save the black shape with a transparent background in photoshop as a .psd and import it. But that didnt work.
When i change episodes it just stays black the whole time. I want something that will be invisible when it is not selected.
please help
I can send someone my little shape if they can make it a usable button that i can make invisible in dvdsp. I really need to see the layers done with a shape as a button to see how they were able to make it invisible.
i tried a few tutorials but instead of being invisible all i got was a shape that was stuck white the whole time. this is even when i put the opacity to 0 on normal.
I want to make this into a button
http://img694.imageshack.us/i/custonbutton.png/

Ok, what you want to do is also in the same tutorial. See the section on "Advanced Highlights" (again, avoid the sections on layered menus), You can create an overlay that does have two colors. The bad news is that there will be absolutely no anti-aliasing at all. This means your graphic will be extremely pixelated. This is just the way the DVD specs are set up, so there is no way around it.
Given that I would highly recommend redesigning your overlay. Take a look at variety of DVDs from Hollywood. See what they are doing in their menus. You can do anything they are doing, but you will notice that the overlay is very simple because of the limited anti-aliasing of DVDs. In all the years that I've been watching DVDs I've only see one DVD use two colors in the overlay, and that was the Jim Carey "The Grinch who Stole Christmas."

How do you make a slideshow with pictures & videos?

ok, i'm new to mac & video editing. i want to make a slideshow with pictures & @ the end of it, i want to put in a clip from a home video. if i put the home video on a DVD, will i be able to edit it? i know i have to edit the video in imovie but where do i go from there? can i import it into iphoto & make the slideshow there? if so, how do i save the imovie project as the right file type so i can import it into iphoto? if i can't make it in iphoto, what program do i use? i want the slideshow to be able to be viewed on a PC also.

Welcome to the Apple Discussions. As already mentioned you'll need to use a 3rd party slideshow application or iMovie.
However, you can create a slideshow in iDVD with stills and a video clip as iDVD 7 (08) now permits both stills and movie clips to be placed in a slideshow. This screenshot shows multiple video clips in an iDVD slideshow but you can also have stills and video clips.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

How do you make a customized template?? When I customize an original template it does not apply it to the whole document! How do you apply style changes permanently to your document???

When one customize text styles or spacing between paragraphs. How do you apply settings permanently to a document???
Should you create a new template???

Happily, when you edit a document created by a given template, the changes aren't stored in the template.
If you want to get a template embedding your changes, you need to use :
File > Save as Template
then use the newly created custom template as starting point.
Yvan KOENIG (VALLAURIS, France) dimanche 22 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

How do you make a custom database query?

I have a web app with a custom field for "Job Title." How do I create a page with all the "Regional Managers"?
I know it's possible with a web app search form. I don't want a form. I just want the page with the results.
I know it's possble using Site Settings "categories." I don't want that, I want to use custom fields.
I don't want to download the entire database and have jQuery sort it on the client machines. It could fail if the database has thousands of records.

That is correct, everything is happening client-side.
Simple sorts and filters generally aren't that taxing & anything that is more complex is easily handled by underscore or lo-dash. Completely anecdotal, but I've never really noticed any sort of slowdowns or hiccups with this sort of approach.
Adding BC's category tags to each item probably isn't feasible, but I think it's the closest you're going to be able to get when it comes to a truly server-side solution.
That being said, I think the web app search functionality might be something that is worth playing around with. Rather than having a full blown search form on your page, I believe you might be able to rig something up in JS that uses the web app search functionality to give you back what you're looking for in JSON and then inject that where you need it without a page reload. Maybe something in jQuery like:
$.ajax({
url: "/Default.aspx?CCID=12345&FID=567890&PageID={module_oid}&JSON=1",
data: { CAT_jobTitle: 'Regional Manager'}
.done( function( results ){ doThingsWithTheResults });
...not 100% sure on the specifics of getting that to work, but I think the general principle is sound.

How do you make a custom portable ID?

try psnprofiles.com for a decent trophy card and great info/stats.

Farhankhosravi wrote:
I can change this I'd? How? <a href="http://eu.playstation.com/psn/profile/Farhankhosravi/"><img src="http://mypsn.eu.playstation.com/psn/profile/Farhankhosravi.png" border="0" /></a> Sony temporarily disabled the ability to customise

How do you make a custom Border?

Hi, this question seems kind of simple... but I read the border turtorial and they do not give many hints.
|---- [JComponent] ---------------------|
|                                       |
|                                       |
|                                       |
|---------------------------------------|

Search the forum using "abstractBorder" as the keyword. This one looked promising:
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=548281
But I would probably take a look at the TitledBorder source code, given that it would have most of the code you need. You would need to replace the code that paints the "String" with code that paints the "Component".

How can you make your persona show on the top and bottom? Also can you make it bigger at the top to show more of the picture?

How can you make your persona show on the top and bottom?
Also can you make it bigger at the top to show more of the picture?

Add extra empty toolbars if you want to see more of the persona.<br />
You can create extra toolbars to get extra space via View > Toolbars > Customize<br />
You have to put something on a toolbar (drag a Space item onto it) before closing the Customize window because empty toolbars are automatically removed.<br />
See http://kb.mozillazine.org/Toolbar_customization

How do you make a 3d octagon in photoshop cs4 extended?

How do you make a 3d octagon in photoshop cs4 extended that you can map artwork to? I've been searched online for a solution that doesn't involve using a 3D program but can't find anything. Can't you extrude a shape like in Illustrator, or exporta true 3D shape from Illustrator that will work? I'd use Illustrator but the mapping thing is finicky, and doesn't alow wrapping images around angles. (now someones going to say: "Don't mention any other programs in a PHotoshop forum!" Yeah yeah, there should be a forum then about using different Adobe programs together.) End of rant, any suggestions much appreciated.
Thanks,
Mike

Thanks for your prompt response!
Suggested Bridge Update
It turns out that I got a message that this update had already been installed, which led me to more carefully look at the Bridge window and (finally) see that the Output module had a Quality dropdown: Full, 300 ppi, 150 ppi, 96 ppi and 72 ppi. Thanks! I decided to compare the CS4/Bridge results to those I got in CS2 with its convenient File/Automate/PDF Presentation/Multi-Page Document routine that I like.
My project was an 8-page PDF made from scanned pages of handwritten notes into which some fairly small type had been insert using the Photoshop CS2 Type tool. In Photoshop CS2, I had settled on "medium quality" JPEG compression as giving a "reasonable" file size (about 7 MB) and "very good/excellent" image quality. I experimented with making the PDF in Bridge, using all five Quality levels. See table below. The Bridge "good minus" file was about the same size as the file produced in CS2, which I judged to be "very good/excellent" and slightly better visually than the 300-ppi, 23.5-MB Bridge file.
Bridge Quality:
Full
300 ppi
150 ppi
96 ppi
72 ppi
File Size:
25.2 MB
23.5 MB
7.6 MB
3.2 MB
2.1 MB
Subjective Quality:
Very good
Very good
Good minus
Poor
Useless
I appreciate that you may not be all that interested in these observations, but it seems to me that Adobe has done us no favors in the multi-page PDF department in going from CS2 to CS4!
Install the Old Contact Sheet/Picture Package Plug-Ins
I had already done this some time ago, in order to get in CS4 the File/Automate/Contact Sheet II feature I liked in CS2. It does not appear to me that this plug-in has anything to do with make multi-page PDF's. Perhaps I'm missing something.
Again, thanks for your response!

How do you change the size of pictures?

Hello,
I'm a new Mac user. How do you change the size of pictures in iPhoto? Sometimes when sending e-mails, the picture files are extremely large and take a long time to load... Is there any way you can make the picture or file smaller? Like on a PC, you can open the photo in the Paint program and just reduce the size... Is there anything like this for the Mac?
Thanks!

Assuming that you're accessing your email package from INSIDE iPhoto, you're given a choice of picture sizes. Personally, I've found "medium" to be a good compromise but you might prefer "small" (iPhoto will tell you the file size).
If you don't know what I'm talking about, first go iPhoto Preferences > General and select your email client. Then, go to the View menu and select Show in Toolbar > Email.

How do you transfer files (Music/books/pictures) from an iPAD or iPOD device to an new PC that has iTunes, but no data of files

I have purchased an new PC since my oriiginal PC crashed after 5 years of use. I want to transfer my iTunes files from my iPAD and iPOD to my new PC.
How do you transfer files (Music/books/pictures) from an iPAD or iPOD device to an new PC that has iTunes, but no data of files

The text below is copied from this discussion.
https://discussions.apple.com/message/11527071#11527071
Authorize your new computer's iTunes first - Store>Authorize this computer.
1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your laptop and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.
This discussion has much of the same information and even some more helpful tips.
https://discussions.apple.com/thread/3305461

How do you make Mozilla listen to users and stop FFFFirefox Auto Updating despite being set to NOT auto update?

I am spitting nails
After all the STUPID problems outlined here
https://support.mozilla.org/en-US/questions/999831?esab=a&s=&r=0&as=s
I set Firefox to stop auto updating,
Then the other day I installed a new user on my laptop, when they loaded Firefox it auto updated MY version of Firefox.
Has NOTHING been learnt?
STUPID STUPID STUPID STUPID STUPID
So I have 2 questions
How do you make Mozilla listen to users?
and how do prevent what happened to me happening again?

SuperSluether
Not a millionth, you have only provided 150 answers and I doubt they were all this issue.
If you don't like it, don't use it.
If a business took this attitude they would soon be out of business
Updates help KEEP YOU SAFE
Sometimes, but in my experience FFirefox updates can really screw up your system, lose you data, mess up your user interface. I have run IT for one of the biggest intranets on the planet and we never allowed even Mictosoft updates until we did User Acceptance Testing and understood the impact of the upgrade. I am a grown up not a child, I have system where I test updates for performance, security and impact, I WILL DECIDE when I want to install it. If Mozilla wants to provide real security updates I would take them but if you look at the link in my OP you will see it said an update was security and it completely messed up.
Updates add tons of great new features
Actually with FFirefox in my experience they take more away than they add, things I did not ask them to take, they do not look at my config and leave my settings as they were and then tell me about new options, no they completely screw my productivity as it takes days to figure out how to undo the kwap they have added. Copying the AWFUL Chrome interface is not an improvement, Google has one of the worst UI's on the planet accross all their products.
Firefox is designed to be customized PER USER, NOT CROSS-SYSTEM
There are some things that benefit from being per user and some that are per machine, windows has group policies per machine and per user. My OP is telling Mozilla that this is another area where they have "designed" badly, I tell them this so that they improve it and in the vain hope that there is some config setting that will stop this nonsense.
So SuperSluether you have not really helped, all you seem to say is FO if you do not like it. Good job you do not run a business. With that attitude probably best you do not contribute.

How do you produce both Customs Export & Import documentation in an STO?

Hello All -
How do you produce both Customs Export & Import documentation in an STO scenario? For instance, if a company would like to create a STO in SAP to move materials from one plant to another and would like to produce both the Export & Import paperwork in GTS, what documents would be needed in R/3 to make this possible?
Would the following be needed, or is there some other way?
- STO
- Outbound Delivery & F8 Invoice to generate the Customs Shipment in GTS for the Export documentation
- Inbound Delivery to generate the Customs Declaration in GTS for the Import documentation

Thanks Sameer -
Yes, for the Import documentation, I think we will be declaring prior to Goods Receipt, so we will first use the Inbound delivery, and then the GR document later on once the materials have been received. (I believe you and I were talking about some of this in another thread actually.) Thank you for confirming this.
As for the Note, I have also seen this - but thought that this was to more or less give visibility to the sending plant up-front at STO of what export licenses might be needed. (According to the note, currently they would only be able to check if licenses were needed at the outbound delivery, and not on the PO)
Per the note: "Given a Stock Transport Purchase Order scenario: Plant A in Germany issues a STO PO against vendor plant US10 in the US. GTS looks at the PO in terms of importing from the US (departure country) coming into Plant A in Germany and performs compliance checks. Meanwhile, exporting plant US10 only has visibility at outbound delivery creation to see if am Export License is needed. Exporting plant US10 may want to know if they need a license to the country of destination, in this case Germany, at STO PO creation."
However with the proper country-level export/import activation of the legal regulations, I believe that you can still have the STO check export-related licenses even though it is mapped to GTS as IMPORD. I have done some testing on this and it appears to work (you just need to ensure that you are activating the relevant countries for export/import properly in the legal regulation, and you can have both export & import documents check the same legal regulation and deliver the correct license determination). I was just wondering if you had any experience with this that was contrary to what I have found, or if there is something you think I am missing..
Thanks

How do you make a photo in DW that changes automatically in a loop and needs no visable buttons

How do you make a photo in DW that changes automatically in a loop and needs no visable buttons?

I'm sorry to be so vague. I have recently found out that what I want
to do is put my images in a javascript image rotator. I have looked
this up on google and have now tried about 6 different codes. I try to
follow the insert directions but I must be doing something wrong. I
get the first photo linked up but can never make the picture change to
show the other two photos in the image folder.
Can you direct me as to how this works in dw?
Thank you so much for helping.
Pam

HOW DO YOU MAKE A VIGNETTE AROUND A PHOTO IN PSE 7?

HOW DO YOU MAKE A VIGNETTE AROUND A PHOTO IN PSE 7? ALSO, HOW DO YOU MAKE THE PHOTO KIND OF HAZY LOOKING? JUST A SLIGHT BIT FOR EFFECT. THANK YOU FOR YOUR HELP!

1966desertrat,
There are various ways to do this; here is one:
Open picture file
Duplicate background layer
Open new blank layer, and fill with white (Edit>fill>white)
Drag this layer between the background layer and the background copy layer
On the top layer, make a selection of the subject by dragging with the Elliptical marquee tool, position it to embrace the subject - can use arrow keys on keyboard to fine-tune
Go to Select>inverse
Go to Select>feather>try 25px - experiment for degree of feather
Hit delete on keyboard
Go to Select>inverse
Go to Select>deselect
To blur, go to Filter>blur>gaussian blur and adjust slider to suit
Message was edited by: hatstead
You may like Dreamy Suite software which you can download free. I use the stand-alone version.
http://www.autofx.com/freeplugins/dreamyphoto.asp?id=7

How do you make a custom profile picture?

Similar Messages

Maybe you are looking for