How Do You Make a Diagonal Cut to a Layer in Photoshop CS5
I'm wanting to make a diagonal cut and can find no information about how to do this. Help!! Thanks!!
Easiest way might be Polygonal Lasso Tool and command-shift-J.
Similar Messages
-
As you can see in the screenshot here ----> Gyazo - b048a0770df6264af1ff398951acd4f9.png I have typed a higher resolution but when I try the pixles never seen to ever go away and it increases the file size every time, is there an easier way? PS: if another adobe cc software is needed to complete this task I have every one so it doesn't have to only be in Photoshop.
The image has been reduced in size and over sharpened to the point that jaggies artifacts abound. You will not be happy with the result of interpolate the images up in size increase the number of pixels.. You need to find the original image file from the camera.
-
How can you erase part of the black & white layer on Photoshop CS6?
I've been trying to earse part of the b&w layer to have color pop because it's easier for some floweres instead of magic lassoing. Unfortunatly my earser tool will not let me earse some of the black and white layer. What can I do to fix this issue?
Try using a Layer Mask, and paint black on the mask to cause the Black and White adjustment to become "transparent" in those areas and reveal color.
If you cause the transparency to go outside the bounds of what you want, paint white on the Layer Mask to make it apply the adjustment layer effect again.
Grayscale on the Layer Mask will cause partial transparency.
Have fun discovering the neat stuff you can do with Layer Masks.
-Noel -
Sorry I'm new to Final Cut Express. How do you make an image (jpeg file for example) move across the screen slowly as I've seen in many films.
Neil from bristol wrote:
… How do you make an image … move across the screen …
by setting KEYFRAMES
(read, what FC/e's built-in Help-feature tells about it)
resize and set pic to start position
set keyframe
move playhead in timeline to desired length
set pic to end position
set keyframe … -
How do you make one long track into multiple tracks?
How do you make one long track in itunes into multiple tracks? Is there a way to do that?
I found another solution too through Garageband. I don't know if it was easier, but I liked this way of creating seperate tracks.
First, You put the long track into Garageband.
-then you create a New Basic Track under Track Tab-create as many of those as tracks you want to make
-also make sure the headphones button is lit up under each New Basic Track-this allows it to be a 'solo' track.
-then you can start cutting music-with the long strip find where you want to split into a new track and drag that half down into each New Basic Track.
-Once you are done, press Option Z and a purple little triangle will appear up by the measures. drag the triangle to the end of the first track-this allows it when sharing to itunes to just record the particular track you want, it puts a stop/end to that track.
-then, make sure the track you want to share is highlighted the bright orange and go to share, 'send to itunes'
-it will send that to itunes and you can rename it in itunes.
-Go back to Garageband-delete the first track you successfully shared and move the next one up to where that one was. Slide it accross to the left so it is at the beginning, press option Z and move the purple triangle where you want it to be...and you are good to repeat until all your tracks are done!
I am a very visual person, and this helped to see where I was cutting each track, just another way! -
How do you make a web browser?
I would like to make a Web Browser of my own but how did you make FireFox?
Read this:
http://thepattysite.com/window_sizes1.cfm
You don't want to try to launch your site to full screen,
honest, as you'd
drive your (potential) visitors away.
Jo
"Steve Zavodny" <[email protected]> wrote in
message
news:escrfa$s7$[email protected]..
> How do you make a web browser launch your site to a
specific size or even
> full screen?
> Thanks... -
How do you make superscripts and mathematics in Preview's text annotation?
When adding text annotations that include scientific notations, how do you make superscripts, e.g. "3.2 × 10^{-23}"?
Searching Help for 'superscript' turns up nothing, suggesting the command does not exist, as it does under Baseline etc. in iWork. Please tell me this is not the case! If it is, has the situation been improved in the new operating system?
A related issue: I wish to include other mathematics -- is there a way to include mathematics similar to LaTeX? Might Preview incorporate using latex code in the future, so I can easily type "\exp{-\lambda t}" etc and have the math appear?
I'm adding text annotations to PDF lecture notes in Preview, basically filling in blanks the instructor has left so students will pay attention in class, and these annotations include superscripts; I wish to format properly.
Thank you!Once you have the circle shape displayed, long press on the border of the circle. Once it is highlighted, drag horizontally or vertically. This should allow you to distort the circle into an ellipse (or the square into a rectangle).
Hope that helps,
Frank
Sketch Engineering -
How can you make one button preform different actions in Xcode?
How can you make one button "preform a click" and "orderfront"? Is that possible? Because what I am doing is making a welcome window to my application for Mac OS X 10.6, and I have two buttons in that window, one says "Connect" which connects a a WebView to a url and the other button opens up the main window. So how can I a make a button do multiple things at once??
Ah - If you are just using bindings between various objects from Interface Builder, you can reduce your application code a bit (sometimes quite a bit), but there is only so far you can go. Typically variables and routines are defined in your application that Interface Builder hooks into, so that your application code (usually Objective-C, but can be others) can use these variables and routines to determine what is happening in the user interface.
I'm not sure how up-to-date the project code is (or what programming code you are familiar with), but you can take a look at Apple's Cocoa Application Tutorial to see what is (usually) involved in creating an application. -
How can you make the iPod tell the diff between a movie and music video
Greetings!
How can you make iPod tell the difference between a Music Video and Movie? Everything I put up on the iPod falls into Movie. So is it something I have to do in iTunes?
Thanks for the help!Rightclick the video in iTUnes, hit Get info then the "Options" tab. Beside kind you can set it to movie. music video. or TV show
-
How do you make the sentences you input in a drop down list wrap to the next line?
How do you make the sentences that you input in a drop down list to wrap to the next line?
You can't.
see this thread for more info: Can you set drop down list as multi-line??? -
I have multiple devices used by family members, how do you make sure the kids don't see Moms messages from Dad and visa versa?
Hi Roger:
Thanks for the reply. I think I figured out the problem. Apple has confused (at least in my mind) the different IDs that people can have. In the iCloud settings, they use the term Apple ID and not iCloud ID. I guess there really is no such thing as an iCloud ID. There are Apple IDs with various attributes. This is not clearly explained or easy to see (how could I look up to see if my Apple ID is associated with iTunes for example?).
I created, what I thought were iCloud IDs for each family member, but we all use my Apple ID for iTunes.
One other question - why does the syncing of Notes using iCloud require an @me.com email account. That makes no sense to me.
Thanks for your help!
AO -
How do you make a 3d octagon in photoshop cs4 extended?
How do you make a 3d octagon in photoshop cs4 extended that you can map artwork to? I've been searched online for a solution that doesn't involve using a 3D program but can't find anything. Can't you extrude a shape like in Illustrator, or exporta true 3D shape from Illustrator that will work? I'd use Illustrator but the mapping thing is finicky, and doesn't alow wrapping images around angles. (now someones going to say: "Don't mention any other programs in a PHotoshop forum!" Yeah yeah, there should be a forum then about using different Adobe programs together.) End of rant, any suggestions much appreciated.
Thanks,
MikeThanks for your prompt response!
Suggested Bridge Update
It turns out that I got a message that this update had already been installed, which led me to more carefully look at the Bridge window and (finally) see that the Output module had a Quality dropdown: Full, 300 ppi, 150 ppi, 96 ppi and 72 ppi. Thanks! I decided to compare the CS4/Bridge results to those I got in CS2 with its convenient File/Automate/PDF Presentation/Multi-Page Document routine that I like.
My project was an 8-page PDF made from scanned pages of handwritten notes into which some fairly small type had been insert using the Photoshop CS2 Type tool. In Photoshop CS2, I had settled on "medium quality" JPEG compression as giving a "reasonable" file size (about 7 MB) and "very good/excellent" image quality. I experimented with making the PDF in Bridge, using all five Quality levels. See table below. The Bridge "good minus" file was about the same size as the file produced in CS2, which I judged to be "very good/excellent" and slightly better visually than the 300-ppi, 23.5-MB Bridge file.
Bridge Quality:
Full
300 ppi
150 ppi
96 ppi
72 ppi
File Size:
25.2 MB
23.5 MB
7.6 MB
3.2 MB
2.1 MB
Subjective Quality:
Very good
Very good
Good minus
Poor
Useless
I appreciate that you may not be all that interested in these observations, but it seems to me that Adobe has done us no favors in the multi-page PDF department in going from CS2 to CS4!
Install the Old Contact Sheet/Picture Package Plug-Ins
I had already done this some time ago, in order to get in CS4 the File/Automate/Contact Sheet II feature I liked in CS2. It does not appear to me that this plug-in has anything to do with make multi-page PDF's. Perhaps I'm missing something.
Again, thanks for your response! -
I have three device: Macbook Pro (OSX 10.7.5) for work; an iPad and a Blackberry for mobile. I used mail, iCal, and Address Book combine with mobileme (iCloud) to exchange data such as contact, calendar and task from my Mackbook Pro to my iPad but never to Blackberry. The problem is my boss was asking me to change to Outlook 2011 for Mac because some of the email that I sent from Mail did not appear in my client's Blackberry. So how do you sync iCloud (contact, calendar, task) to Outlook 2011 for Mac? and how do you make seemless sync between iCloud to Outlook 2011 to Blackberry device or an iPad?
Best regards,
W. SasongkoMore Like This --------------------------------------->
-
How do you make a MacBook Pro talk to an Epson printer?
MacBook Pro
OS X 10.6.8
(Thinking about getting another MacBook)
I had an Epson Artisan printer, got an Epson Workforce WF-3640 new in Jan, hardly used because I cannot make it do what I want it to do. Wireless connection is good.
With the MacBook Pro, the interface with the Epson printers is not what it used to be on the G4: no ColorSync, no 2-sided, no thick paper, none of those kinds of instructions appear on the generic printer control panel. Which by the way, bears NO resemblance to the Epson manual screenshots, and the instructions in the Epson manual are useless.
How do you make a MacBook Pro talk to an Epson printer? And by the way, I cannot use the scanner either. I have to set up a document to print, then when the printing progress box appears, click on the scanner icon.
Also
Printer has 2 compartments. Top compartment #1 for all types paper.
Bottom compartment #2 for plain paper only.
I load glossy photo paper in #1, it prints plain paper from #2 even though I entered instructions on the control panel on the printer.If you haven't done so already, try resetting the printing system.
Reset Printing System -
How do you make an array of image icons and then call them?
How do you make an array of image icons and then call them, i have searched all over the internet for making an array of icons, but i have
found nothing. Below is my attempt at making an array of icons, but i cant seem to make it work. Basically, i want the image to match the value of the roll of the dice (rollVal)
Any help would be greatly appreciated, some code or link to tuturial, ect.
/** DiceRoller.java
* Roll, print, Gui
import javax.swing.*;
public class DiceRoller extends JFrame
private ImageIcon[] image ;
public String[] images = { "empty", "dice1.jpg",
"dice2.jpg", "dice3.jpg", "dice4.jpg",
"dice5.jpg", "dice6.jpg" };
public Dice die;
private int rollVal;
public int rollNum;
private JLabel j1;
public DiceRoller(){
j1= new JLabel("");
die =new Dice();
int rollVal;
rollVal = die.roll();
image = new ImageIcon[images.length];
for(int i = 0; i < images.length; i++){
image[i] = new ImageIcon(images);
if (image!=null){
j1.setIcon(image[rollVal]);
System.out.println("Roll = "+die.roll());Demo:
import java.awt.*;
import java.net.*;
import javax.swing.*;
public class IconExample {
public static void main(String[] args) {
EventQueue.invokeLater(new Runnable(){
public void run() {
launch();
static void launch() {
try {
Icon[] icons = new Icon[6];
for(int i=0; i<icons.length; ++i) {
String url = "http://www.eureka-puzzle.be/cast/images/dice" + (i + 1) + ".jpg";
icons[i] = new ImageIcon(new URL(url));
display(icons);
} catch (MalformedURLException e) {
throw new RuntimeException(e);
static void display(Icon[] icons) {
JPanel cp = new JPanel();
for(Icon icon : icons) {
cp.add(new JLabel(icon));
JFrame f = new JFrame();
f.setContentPane(cp);
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.pack();
f.setLocationRelativeTo(null);
f.setVisible(true);
}
Maybe you are looking for
-
My macbook pro can't find my external drive after upgrading os
I have a macbook pro from 2009. I recently upgraded to Yosemite and now it won't read my external drive (Toshiba). I am able to find it in disk utility but I am not able to open it. The device works fine in other computers. I have all my pictures the
-
Line Alignment Problem while sending Fax from SAP Script
Moderator message: please do not post the same question in different forums Hi Experts, While sending fax the horizontal lines are not displaying till the end of the page. But in the print preview the lines are displying till the end. If this is prin
-
How to tace erronious records in a mapping or a process flow?
Hi All, I read the following document by Rittman. http://www.rittman.net/work_stuff/tracing_owb_mappings_pt1.htm I am using Oracle Warehouse Builder 10G R1. But I feel, it may solve my problem. My problem scenario is as follows. Here I would like to
-
Recording/exporting to quicktime
Is the function of recording a Keynote show with timings and transitions completely garbage when exported to Quicktime? When I export, it seems that most of the transitions are lost. Is there something I'm missing or is this just broken? I need to fi
-
problem is when viewing my webmail with Firefox there is nothing in the inbox, but all other folders are fine.