How do you  make a file private ?

I've uploaded a file to Adobe cloud to allow others to see it. If I want to add other files for specific people to see how do I make that file password protected?

In Adobe Acrobat you can secure PDFs with certificates:
Acrobat Help | Securing PDFs with certificates

Similar Messages

  • Not sure if Mavericks is worth the effort of downloading and I prefer mountain lion.  How do you make a file in Finder.

    I am not sure if Mavericks is much better than Mountain Lion as an OS.  The maps part was okay but I could not view the map as shown on the apple website, there was no 3D.  How do you create a file in Finder on the MacBook Pro.?

    Duuuuuuuuuuuuuuuuuuuuuuuude!!!!!!!!!!!!  YOU DID IT!  I cannot believe it!
    I changed "Move To Trash" to "Move to Trash" and selected a file.  I had lost all hope, so I took a minute to prepare myself for yet another moment of deep frustration.  Then I pressed F10, and bang! the file was trashed!!!  It took me a couple minutes to actually believe what just happened.  Thank you so much!  If I could, I would "like" you as many times as I can physically hit the "Liked" button!
    PS: what the heck is wrong with Apple though???  Wrong instructions, incorrect help instructions on their own site.  The chances of figuring this out before having a nervous breakdown were like one in a million (approximately, I did not actually do the math).  Last week, the keyboard and the trackpad stopped responding on my brand new macbook pro for a couple hours. I was not the only one with this problem.  Apparently, this was from a design flaw, which means it could happen again at any time.  iMovie doesn't work.  TextEdit keeps crashing all the time.  Emptying the trash can take hours. 
    Since 2000, I bought a PMac G4 Quicksilver, a used PMac G3 Blue, a used iBook G4, a used Pismo PBook G3, a used Graphite iMac G4, a used iMac G3 (green, 233MHz I think) and I already had more problems with this brand new macbook pro than will all the other macs combined...  For such an expensive machine, with 16GB of RAM, that's a little dissapointing, especially from Apple.  Maybe I'm just not lucky.
    Anyways, thanks again!  Best moment of 2014!

  • How do you make RealPlayer files?

    I need to make RealPlayer files of my FCP movies. I downloaded Real Export Plug-in for Mac OsX from Real Networks. It is supposed to enable Quicktime Pro to export RealPlayer files. However it gives me a "export failed" message.
    Anybody know about this?
    I am running Panther and Quicktime 7.0.4. Real Export is supposed to be compatible with Panther but not Tiger.
    I have Cleaner 5 and 6 but it seems like Cleaner won't convert to RealMedia unless I'm also running OS9, which I am not. I am looking into this further.
    Bottom line: how can I make the RealPlayer files?
    All help greatly appreciated.

    Bogiesan,
    Are you running Tiger? I didn't install the Real Export Plug-in on my Tiger machine because RealNetworks said it was incompatible with Tiger. If you are running Tiger then maybe I should take the plunge.
    Thanks.

  • How do you make fla file the default document to test the project?

    my default document is the swf file.  help me please.

    You create your flash application in Flash Professional by creating new FLA file and editing it. The output (flash application) of this proces is SWF file. Which is then played by Adobe FlashPlayer.
    When you test your project, the SWF file is exported and then opened by flashplayer.
    FLA is your source file and you keep it on your computer for later editing.
    SWF is your actual application and you deploy (copy) it on the server or wherever you intend to deploy your application.
    If what you're trying to say is that you wish to debug your application, then test it not by pressing Ctrl+Enter, but Shift+Ctrl+Enter.

  • Sorry I'm new to Final Cut Express. How do you make an image (jpeg file for example) move across the screen slowly as I've seen in many films.

    Sorry I'm new to Final Cut Express. How do you make an image (jpeg file for example) move across the screen slowly as I've seen in many films.

    Neil from bristol wrote:
    … How do you make an image … move across the screen …
    by setting KEYFRAMES
    (read, what FC/e's built-in Help-feature tells about it)
    resize and set pic to start position
    set keyframe
    move playhead in timeline to desired length
    set pic to end position
    set keyframe …

  • How do you consolidate audio files in Premiere? (Make multiple audio files on a track one file)

    How do you consolidate audio files in Premiere? (Make multiple audio files on a track one file). Also, my client is having a hard time making an omf that Pro Tools can read. The files can not be found by Pro Tools. How do you make an omf that Pro Tools can read?

    Multichannel export;
    http://strypesinpost.com/2012/11/exporting-multichannel-quicktimes-in-premiere-pro/
    When you export the OMF, select Encapulate Files in the Settings window

  • How do you make a spreadsheet or cells secure and private?

    In using numbers, I want to make a spreadsheet secure (limited access). How do you do this ..... Or how do you make the cells within it secure?

    Password protect the file (although there's some doubt as to the strength of that protection).
    save the file to an encrypted Disk Image. See Mac Help in the Finder's Help menu for details.
    There's no way to fully protect the cells of an open document. Numbers provides for locking "objects," but cells themselves are not objects. Tables are, objects, so you can lock a complete table. That prevents changes to the table until it is unlocked, but does not prevent changes to other tables in the document, nor does it prevent any used from unlocking the table then editing it.
    Jerry has offered a technique which may be used to guard against inadvertent changes to individual cells. You can read it in his responses in Hold Table Position in a Sheet.
    Regards,
    Barry

  • Receiving calls marked "Private".  Who can make and how do you make these calls?

    Receiving calls marked "Private".  Who can make and how do you make these calls?

    Anyone can make them, just dial *67 in front of the # you're calling.

  • How do you make a PDF file fillable?

    How do you make a pdf fillable?

    Hi,
    Please visit this pdf document it shows you steps, how to make a document a fillable form :http://www.adobe.com/content/dam/Adobe/en/products/acrobat/pdfs/adobe-acrobat-xi-convert-f orms-into-fillable-pdf-tutorial_ue.pdf
    Also you may watch this video: http://www.youtube.com/watch?v=O0PPzFq3X00
    Regards,
    Ajlan Huda.

  • How do you make a 3d octagon in photoshop cs4 extended?

    How do you make a 3d octagon in photoshop cs4 extended that you can map artwork to? I've been searched online for a solution that doesn't involve using a 3D program but can't find anything. Can't you extrude a shape like in Illustrator, or exporta true 3D shape from Illustrator that will work? I'd use Illustrator but the mapping thing is finicky, and doesn't alow wrapping images around angles. (now someones going to say: "Don't mention any other programs in a PHotoshop forum!" Yeah yeah, there should be a forum then about using different Adobe programs together.) End of rant, any suggestions much appreciated.
    Thanks,
    Mike

    Thanks for your prompt response!
    Suggested Bridge Update
    It turns out that I got a message that this update had already been installed, which led me to more carefully look at the Bridge window and (finally) see that the Output module had a Quality dropdown: Full, 300 ppi, 150 ppi, 96 ppi and 72 ppi.  Thanks!  I decided to compare the CS4/Bridge results to those I got in CS2 with its convenient File/Automate/PDF Presentation/Multi-Page Document routine that I like.
    My project was an 8-page PDF made from scanned pages of handwritten notes into which some fairly small type had been insert using the Photoshop CS2 Type tool.  In Photoshop CS2, I had settled on "medium quality" JPEG compression as giving a "reasonable" file size (about 7 MB) and "very good/excellent" image quality.  I experimented with making the PDF in Bridge, using all five Quality levels.  See table below.  The Bridge "good minus" file was about the same size as the file produced in CS2, which I judged to be "very good/excellent" and slightly better visually than the 300-ppi, 23.5-MB Bridge file.
    Bridge Quality:
    Full
    300 ppi
    150 ppi
    96 ppi
    72 ppi
    File Size:
    25.2 MB
    23.5 MB
    7.6 MB
    3.2 MB
    2.1 MB
    Subjective Quality:
    Very good
    Very good
    Good minus
    Poor
    Useless
    I appreciate that you may not be all that interested in these observations, but it seems to me that Adobe has done us no favors in the multi-page PDF department in going from CS2 to CS4!
    Install the Old Contact Sheet/Picture Package Plug-Ins
    I had already done this some time ago, in order to get in CS4 the File/Automate/Contact Sheet II feature I liked in CS2.  It does not appear to me that this plug-in has anything to do with make multi-page PDF's.  Perhaps I'm missing something.
    Again, thanks for your response!

  • How do you make an array of image icons and then call them?

    How do you make an array of image icons and then call them, i have searched all over the internet for making an array of icons, but i have
    found nothing. Below is my attempt at making an array of icons, but i cant seem to make it work. Basically, i want the image to match the value of the roll of the dice (rollVal)
    Any help would be greatly appreciated, some code or link to tuturial, ect.
    /** DiceRoller.java
    * Roll, print, Gui
    import javax.swing.*;
    public class DiceRoller extends JFrame
         private ImageIcon[] image  ;
         public String[] images = { "empty", "dice1.jpg",
                   "dice2.jpg", "dice3.jpg", "dice4.jpg",
                   "dice5.jpg", "dice6.jpg" };
         public Dice die;
         private int rollVal;
         public int rollNum;
         private JLabel j1;
         public DiceRoller(){
              j1= new JLabel("");
           die =new Dice();
           int rollVal;
           rollVal = die.roll();     
           image = new  ImageIcon[images.length];
         for(int i = 0; i < images.length; i++){
          image[i] = new ImageIcon(images);
         if (image!=null){
              j1.setIcon(image[rollVal]);
         System.out.println("Roll = "+die.roll());

    Demo:
    import java.awt.*;
    import java.net.*;
    import javax.swing.*;
    public class IconExample {
        public static void main(String[] args) {
            EventQueue.invokeLater(new Runnable(){
                public void run() {
                    launch();
        static void launch() {
            try {
                Icon[] icons = new Icon[6];
                for(int i=0; i<icons.length; ++i) {
                    String url = "http://www.eureka-puzzle.be/cast/images/dice" + (i + 1) + ".jpg";
                    icons[i] = new ImageIcon(new URL(url));
                display(icons);
            } catch (MalformedURLException e) {
                throw new RuntimeException(e);
        static void display(Icon[] icons) {
            JPanel cp = new JPanel();
            for(Icon icon : icons) {
                cp.add(new JLabel(icon));
            JFrame f = new JFrame();
            f.setContentPane(cp);
            f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            f.pack();
            f.setLocationRelativeTo(null);
            f.setVisible(true);
    }

  • How do you make the background of an object transparent in Adobe Illustrator?

    Hello Forum.
    How do you make the background of an object transparent in Adobe Illustrator?
    I have been having issues with using the Magic Wand tool in Adobe Illustrator as well as the lasso tool.
    Basically, I am trying to put a small graphic into a new Illustrator file.
    The first thing I tried to do is to use the magic wand tool.  But I found out that this did not work on a jpeg image since it did not have any individual objects to select.
    So I tried something new.  I opened the file in Adobe Photoshop and used the lasso tool to select an area.  Then I coped this area.  Then I tried to paste it into Adobe Illustrator.  But the background was not transparent for the pasted image.
    How do I make the background transparent.
    I made this small video to show what I am talking about:
    http://youtu.be/2LgMGEF6z10

    Don't Copy/Paste the image.
    Make it transparent in Photoshop, save a PSD and place it in Illustrator

  • How do you make room on your start up disk.  i am trying to do the update but don't have enough space

    how do you make room on your start up disk.  i am trying to do the update but don't have enough space

    Try this:
    1. Open "Finder", then navigate to "Movies" on the left side. Click on "iMovie Projects"
    2. Move desired movies and clips to trash, or your flash drive.
    *PS* Its dangerous to have a full hard drive, I would recommend either trashing, or transferring files to another computer. Trash applications you no longer use as well.

  • How do you make "Acrobat X Pro" open the "combine pdf" window in the foreground?

    How do you make "Acrobat X Pro" open the "combine pdf" window in the foreground?
    I am using a "Windows 7" computer at work with "Acrobat X Pro" and I'm constantly combining
    pdf's and tiff's in Acrobat.
    It would be nice if when I select 30 or 40 files to combine, the
    "Combine Supported Files in Acrobat" window would open in the
    foreground, not behind the 10 or so windows already open.
    I have been researching this for some time now with no solution.
    If the answer is that "IT CAN'T BE DONE", then that's fine. At least
    I will have an answer and can stop searching. If (as I suspect) it can
    be done, then kindly supply me with "step by step" instructions.
    Michael Jones

    Something that works  (provides Acrobat the application precedence in the OS that is requisite for this) --
    Minimize the 10 or so application windows before engaging use of Acrobat's "combine".
    That'll let the Acrobat dialog windows display front and center.
    Be well...

  • How do you make adobe X open the "combine pdf" window in the foreground?

    This may not be the correct forum for this question, but considering that I simply
    have not been able to get a reply in any other Adobe forum, I decided
    to just post this question to ALL Adobe forums until I get a response.........
    How do you make adobe X open the "combine pdf" window in the foreground?
    I am using a "Windows 7" computer at work with "Acrobat X Pro" and I'm constantly combining
    pdf's and tiff's in Acrobat.
    It would be nice if when I select 30 or 40 files to combine, the *******
    "Combine Supported Files in Adobe Acrobat" window would open in the
    foreground, not behind the 10 or so windows already open.
    I have been researching this for some time now with no solution.
    If the answer is that "IT CAN'T BE DONE", then that's fine. At least
    I will have an answer and can stop searching. If (as I suspect) it can
    be done, then kindly supply me with "step by step" instructions.
    Michael Jones

    Hi ,
    I guess that was a bug in that version .
    It does not happen in Acrobat XI and Acrobat DC .The window comes right in front of everything else .
    I wonder that was a bug and that was fixed the other versions.
    You could upgrade to the latest Acrobat version ,i.e Acrobat DC and you would not experience this anymore .
    Regards
    Sukrit Dhingra

Maybe you are looking for