How do you make a horizontal average line in a scatter plot?

In any version of Numbers, is there a way to make a horizontal average trendline? Not a "moving average", but one line that is the average that goes through the data points on a scatter plot.

sflakg wrote:
hit a few roadblocks.
I tried:
1. using the crop tool to make the canvas bigger with a transparent background.
2. Used lasso tool over people in group shot (total of 5) and saved the selection
3. Tried content aware scale to raise the image, but it keeps stretching out the people.
Any thoughts on what else I could try?
Rather than trying to stretch it taller, try to squeeze it horizontally. There are methods for telling it what to protect in the image if it gets touchy.
Another possibility is to use Content Aware Fill to make up part at the top and bottom, without any stretching.
-Noel

Similar Messages

How do I make a best fit line on a scatter plot?

I have a set of data and I made a scatter plot on numbers, but how do I put a best fit line in there?

select the graph, then open the Charts Inspector.
Open the series section (from the options at the top "Chart", "Axis", "Series"), Then select the "Trendline" in the "Advanced" section near the bottom. Finally select the type of trendline

How do you disable text cursor movement when scrolling horizontally with a tilt wheel or touchpad; or rather, how do you make these horizontal scrolling actions only scroll horizontally and nothing else?

Frequently when I use a touchpad or tilt wheel mouse to scroll horizontally, the web page does not scroll at all. Instead, the text cursor moves left or right. If the text box is off-screen, the page will jump to it, losing the spot on the page I was reading. This happens way too often given the sensitivity of touchpads and tilt wheel mice.
I'd like to just disable the cursor movement function of the horizontal scroll. I don't feel that it is useful and it actually hurts my web browsing experience. I do not want to disable horizontal scrolling though; I just want it to always scroll horizontally and do nothing else.

You would make this a little easier if you posted a link to the page.
Most of the jump seems to be some extra padding or margin between the tabs when you rollover, but I am not able to find it. Is there any other css that is governing this page? I did remove a couple of <p></p> set of tags you had and it improved the jump, but it is still there.
If the page is live, run it through the validator http://validator.w3.org/ , fix whatever errors it finds, if you still have the jump, post a link to the page and the issue might get found.
Gary

How do you make the sentences you input in a drop down list wrap to the next line?

How do you make the sentences that you input in a drop down list to wrap to the next line?

You can't.
see this thread for more info: Can you set drop down list as multi-line???

How do you make a page scroll horizontally with mouse wheel?

As the title says, how do you make a page scroll horizontally with mouse wheel in edge animate?

This should get you there
http://css-tricks.com/snippets/jquery/horz-scroll-with-mouse-wheel/
1. Load the mousewheel min script via CDN (jquery-mousewheel - cdnjs.com - the missing cdn for javascript and css) into the Scripts Panel;
2. Add the provided snippet into your Stage > compositionReady event handler.
hth
Darrell

How do you make a 2D line form the outline of a circle.

How do you make a 2D line form the outline of a circle. I want a line to come in from the side of the screen and bend round to form the outline of a circle. In flash pro cc?

you can use one tween to move your line from the side of the screen, then another (shape) tween to bend it into a circle. you will probably need to use shape hints for the 2nd tween.

How do you make superscripts and mathematics in Preview's text annotation?

When adding text annotations that include scientific notations, how do you make superscripts, e.g. "3.2 × 10^{-23}"?
Searching Help for 'superscript' turns up nothing, suggesting the command does not exist, as it does under Baseline etc. in iWork. Please tell me this is not the case! If it is, has the situation been improved in the new operating system?
A related issue: I wish to include other mathematics -- is there a way to include mathematics similar to LaTeX? Might Preview incorporate using latex code in the future, so I can easily type "\exp{-\lambda t}" etc and have the math appear?
I'm adding text annotations to PDF lecture notes in Preview, basically filling in blanks the instructor has left so students will pay attention in class, and these annotations include superscripts; I wish to format properly.
Thank you!

Once you have the circle shape displayed, long press on the border of the circle. Once it is highlighted, drag horizontally or vertically. This should allow you to distort the circle into an ellipse (or the square into a rectangle).
Hope that helps,
Frank
Sketch Engineering

How do you make imessage work? The icon is there. You can type in the recipient but are not allowed to hit the send button

How do you make imessage work? We upgraded to verision5. The icon is there. You can type the message but the send button is not available.

There is some instability in iMessage. It is a versatile and confusing app even though there are so few options in its use.
I had issues trying to get iMessage work on both my iPads and my iPhone.
ON the iPhone, turning off WiFi service and then trying iMessage fixed the problem.
On the iPad 2, same thing. Turning off WiFi service fixed it.
On the iPad 1, I took a suggestion from zoomzoom and changed the WiFi network configuration on the iPad to use 8.8.8.8 as a DNS server and then use iMessage. That fixed it. Now I put the DNS back to default and it still works.
I suspect the iPod Touch will have the same fix as the iPad.
If you have a WiFi and 3G iPad or iPhone, try turing off WiFi and see if that fixes it.
Why? (beware, some of this is guesswork)
iMessage can talk SMS to cellphones and smartphones (that are using the cell-network). It can also talk Apple iMessage format to iPhones and iPads whether they are on cell-network or on WiFi. If you are talking to an SMS cellphone, iMessage figures that out and blindly sends your message. If you are talking to a iOS5 device, iMessage figures that out too, checks to see that they are on-line, and then does something different if they are or are not on-line. If you type in an email address, and not a phone number, I think iMessage attempts to see if the email address is registered with Apple (or iCloud or whatever) and if it is not, it does something to let you know, possibly by making the Send button not light up.
In order to register iMessage and an email, you have to let the iOS device see whatever service it is that iMessage uses. That is where the problem happenes. zoomzoom suggested manually setting the WiFi DNS to google's 8.8.8.8 IP address, then run IMessage, and that seemed to fix the problem. Setting the iOS device to use 3G-only (by turning off WiFi) also fixed the problem. I suspect going down to StarBucks or McDonalds and using their WiFi would also fix the problem. Once the problem is fixed, it doesn't seem to come back so I can't test these 'fixes'.
To change the DNS on your iPad find your WiFi networks configuration, click on the blue arrow, touch DNS, backspace over the number that is shown, type in 8.8.8.8 Then click on the WiFiNetworks button at the top of the screen. Now go run iMessage. After that, you can delete the DNS entry again and leave it blank. Your iPad will fill it in from the WiFi router when it needs it.

How do you make an expanadble text box in a pdf form?

How do you make a text box expand automatically in a pdf form?

Hi;
Is this a question related to FormsCentral or to PDF forms in general? If it is for PDF forms you should ask in the Acrobat forms forums: http://forums.adobe.com/community/acrobat/forms
If it is related to FormsCentral the text boxes do not expand automatically in a PDF, except for when saving a Response as a PDF form, when the responses from the View Responses tab are saved as a PDF form all Multi-line text fields are expanded to fit the text the user had entered.
Thanks,
Josh

How do you make html page resize to fit any browser

Hi All,
How do you make the html page resize to fit any browser/window both vert and horizontally.
Thanks!
Randy

Horizontally by using percentage width instead of pixels. This is called a liquid layout.
http://alt-web.com/TEMPLATES/CSS2-Liquid-Page.shtml
Vertical resizing is irrelevant in web design. Page content determines page height. The more content, the longer the page. The less content, the shorter the page. Scrollbars appear when needed.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

How do you make ruler display ticks every 12 inches instead of every 16 inches?

Hi all,
How do you make ruler display ticks every 12 inches instead of every 16 inches?

I just wish that common features like layers, color, swatches, styles, masks, adjustments, character, paragraph and so on - looked and functioned the same across adobe applications. Is that too much to ask for?
In some cases, that would be absurd. Photoshop and Illustrator are fundamentally differerent environments, as they should be. Photoshop Layers and Illustrator/InDesign Layers are entirely different things, because a vector drawing program works with arranging OBJECTS (raster images, vector paths, text objects) in a Z stacking order and XY position. A Photoshop Layer is essentially just another raster image of the same pixel count as all the others, viewed optionally opaquely or transparently on your screen. It would be ridiculous if Photoshop created a whole new raster image every time you colored another selection of pixels. It would be ridiculous if Illustrator created a new Layer everytime you draw a new path.
Regarding text, Photoshop and Illustrator share the same lame text engine. Illustrator's should be like InDesign's, not like Photoshop's.
And that is a good case-in-point negating the silly defensiveness of Illustrator's outdated and buggy functionality. Illustrator's text handling remains poor today. But it was not updated even to today's treatment until CS 1. For most of its history, its text handling was pathetically primitive compared to that of other programs which were designed for exactly the same purpose and which competed directly with it. Should one "defend" that fact with some nonsensical argument that 'Illustrator is not meant to be a word processor'?
It was not until AI10 that its print dialog acquired a simple Fit To Page command. You had to manually figure and enter a scale factor, and that was limited on the low end to 25%. Can that logically be "defended" on the basis that 'AI is not an imagesetter'? Every dang software on the planet provides a Fit To Page print option!
This "It's not a technical illustration program" argument is every bit as nonsensical. Every one of Illustrator's direct competitors provides for user-defined drawing scales, and has for decades. Illustrator is just as "technical" a drawing program as those others are. It's just particularly lame at it in this regard. And since when is "technical" illustration not "illustration"? And since when is user-defined drawing scale only needed for "technical" illustration? Absolutely ridiculous.
So what if in its infancy Illustrator was a tool for PostScript workflow? Illustrator's leading competitor for most of its history, FreeHand, was initially based on the path drawing engine of a font design software. But when it went to market as a general illustration tool, it blew the functional and interface doors off Illustrator, and continued to do so throughout its history.
The simple fact is this: Throughout its history, Illustrator never kept up with the basic drawing features, interface refinements, and performance of its direct competitors. Its market share is primarily due to its carrying an Adobe label--and to the absurd defensiveness of too many of its users who have next to no experience with anything else.
Ilustrator, Indesign and Photoshop share about 90% of the same functionality.
Where do you get that?
Photoshop's primary purpose is fine-tuning of raster imagery, especially photography. You don't do sophisticated color correction, channel operations, sharpening, etc., in Illustrator or InDesign. That's what I would call its "90% functionality."
InDesign's primary purose is automation of repetitive assembly tasks and text handling in high page-count documents. You don't do master pages, indexes, tables of contents, constant spooling the hard disk, hundreds of externally linked raster and vector files, chapters-long threaded text stories in Illustrator or Photoshop. That's what I would call its "90% functionality."
Illustrator's primary purpose is general-purpose vector drawing (which most certainly includes many kinds of 'technical' illustration) using cubic Bezier curves, and page-assembly for low page-count, illustration-intensive documents. That's what I would call its "90% functionality."
Now ask yourself: Should programs fundamentally structured for different primary purposes necessarily share the same interface? I say no, not necessarily. Example: The mere use of the same term (Layers) in Photoshop and Illustrator for what are fundamentally two different things has led to a gross misunderstanding on the part of Photoshop users who are Illustrator beginners, which is repeated here in this very forum almost every day.
Ask yourself this: Should unyielding adherance to the organizational dictates of Adobe's so-called "unified" interface be allowed to result in a palette flyout menu in InDesign that contains only one option? Is the very concept of a 'menu' not fundametally antithetical to a single choice? Is that not just poor interface design, regardless of whether it "matches" that of the other programs in the so-called "suite"? (Frankly, I find Adobe's over-use of flyout menus--which effectively HIDE important options--generally both ill-conceived and poorly executed.)
No, there simply is no excuse for Illusrator's still lacking user-defined drawing scales, just as there was no excuse for its lacking multiple pages for two full decades, just as there is no excuse for its still lacking reliable snaps, connector lines, live shape primitives (!), proper arc-drawing, proper corner rounding, inline graphics, auto-fitting textframes, the ability to join multiple paths at once, (note that NONE of those can be called specifically "technical" drawing features) and a plethora of other functions that are bare-bones basic to vector drawing. The programs is just archaic and outdated in all these regards, and that's all there is to it.
JET

How do you make a web browser?

I would like to make a Web Browser of my own but how did you make FireFox?

Read this:
http://thepattysite.com/window_sizes1.cfm
You don't want to try to launch your site to full screen,
honest, as you'd
drive your (potential) visitors away.
Jo
"Steve Zavodny" <[email protected]> wrote in
message
news:escrfa$s7$[email protected]..
> How do you make a web browser launch your site to a
specific size or even
> full screen?
> Thanks...

How can you make one button preform different actions in Xcode?

How can you make one button "preform a click" and "orderfront"? Is that possible? Because what I am doing is making a welcome window to my application for Mac OS X 10.6, and I have two buttons in that window, one says "Connect" which connects a a WebView to a url and the other button opens up the main window. So how can I a make a button do multiple things at once??

Ah - If you are just using bindings between various objects from Interface Builder, you can reduce your application code a bit (sometimes quite a bit), but there is only so far you can go. Typically variables and routines are defined in your application that Interface Builder hooks into, so that your application code (usually Objective-C, but can be others) can use these variables and routines to determine what is happening in the user interface.
I'm not sure how up-to-date the project code is (or what programming code you are familiar with), but you can take a look at Apple's Cocoa Application Tutorial to see what is (usually) involved in creating an application.

How can you make the iPod tell the diff between a movie and music video

Greetings!
How can you make iPod tell the difference between a Music Video and Movie? Everything I put up on the iPod falls into Movie. So is it something I have to do in iTunes?
Thanks for the help!

Rightclick the video in iTUnes, hit Get info then the "Options" tab. Beside kind you can set it to movie. music video. or TV show

HT204053 I have multiple devices used by family members, how do you make sure the kids don't see Moms messages from Dad and visa versa?

I have multiple devices used by family members, how do you make sure the kids don't see Moms messages from Dad and visa versa?

Hi Roger:
Thanks for the reply. I think I figured out the problem. Apple has confused (at least in my mind) the different IDs that people can have. In the iCloud settings, they use the term Apple ID and not iCloud ID. I guess there really is no such thing as an iCloud ID. There are Apple IDs with various attributes. This is not clearly explained or easy to see (how could I look up to see if my Apple ID is associated with iTunes for example?).
I created, what I thought were iCloud IDs for each family member, but we all use my Apple ID for iTunes.
One other question - why does the syncing of Notes using iCloud require an @me.com email account. That makes no sense to me.
Thanks for your help!
AO

How do you make a horizontal average line in a scatter plot?

Similar Messages

Maybe you are looking for