How do you make audio tracks independent?

I need to be able to export my live audio tracks 1+2 and M+E tracks 3+4 to QT AIFF mono files
Problem is even when I unclick the speakers and select just 1+2 tracks I still end up with 3+4 mixed in as well.What am I doing wrong?

Check the Audio Outputs assignment on sequence tracks 3 & 4 as this determines the output and therefore export patching ... to see the output assignment for a given track you can right click on or around the track's track lock or auto select button and view the assignment from the context menu displayed.
Hope it helps
Andy

Similar Messages

How do you make audio fast without changing pitch?

How do you make audio fast without changing pitch?

PrPro may have that but I've always just gone over to Audition ... you change speed there, you're given a choice of keeping the pitch the same or allow it to change. Note ... if there's much cha ge in speed the result can be odd.
Neil

How do you combine audio tracks in quicktime 10.2

Students in my class recorded some voice overs in multipe clips. We want to combine them into one track in quicktime 10.2. However the choice to copy the track is grayed out. How can we combine the tracks into one in quicktime 10.2?

Students in my class recorded some voice overs in multipe clips. We want to combine them into one track in quicktime 10.2. However the choice to copy the track is grayed out. How can we combine the tracks into one in quicktime 10.2?
You don't. Use QT 7 Pro or GarageBand instead. (Video editors will also merge multiple audio tracks but they are likely more limited than QT 7 Pro which allows up to 99 data tracks.) GarageBand, also based on older QT 7 Pro technology, allows you to segment tracks, set track or selected track segment volumes to duck track or track segments, adjust or "rubberband" master track volumes, adjust stereo pan for track or selected track segments as well as, "slide" tracks or track segments along the time axis and apply numerous enhancements beyond my ability to even remember here.

How do you keep audio tracks connected to a video track?

I mostly keep the audio and video of captured clip together, in synch. When I put a clip on the timeline, the audio tracks become disconnected from the video track. This is happening regularly and I can't get on with the edit. Every time I move a clip, the audio gets separated from the video. I think something is wrong with my setup. How can I set the project up so that the audio tracks stay with the video track until I unlock them?

I am running into another effect which I don't understand.
I select the video of a clip in the timeline. Then I shift click the stereo audio. This connects the audio and video (which I never separated in the first place). Then when I move the video+audio clip, the clip is copied, which I do not want. I must have turned on something that I don't want. Maybe this has something to do with my linking problem. Shift L did not solve the problem yet, but I need to experiment with it more.

How do you change audio track of iMovie?

I looked in Help and didn't find an answer to changing out my audio track. Anyone?

The track number refers to the number it is on the original album that you got it from. You can change it in the playlist you have, but it's going to keep that change you made even for the original cd. You could always burn it (will be on multiple cds), name the cd, and then re-import it. If you want to change the track number, that's probably the easiest way. Or you can go track by track in your playlist and change it, and deal with it being changed with the original cd. There's no other way besides clicking on the first track, right click to "get info" and go through the "info" tab and change them manually, as far as I know. You don't have to constantly click get info, either. After you do the first track, hit next and it will go to the next song.

How do you consolidate audio files in Premiere? (Make multiple audio files on a track one file)

How do you consolidate audio files in Premiere? (Make multiple audio files on a track one file). Also, my client is having a hard time making an omf that Pro Tools can read. The files can not be found by Pro Tools. How do you make an omf that Pro Tools can read?

Multichannel export;
http://strypesinpost.com/2012/11/exporting-multichannel-quicktimes-in-premiere-pro/
When you export the OMF, select Encapulate Files in the Settings window

How to make the audio track independent from the video track?

Can someone remind me how to make the audio track independent from the video track? My memory just went blank. Must be the age.
Thanks

Hi -
Select the clip in the timeline.
Type Command + L or go to the menu Modify > Link to toggle it off.
MtD

How do you make one long track into multiple tracks?

How do you make one long track in itunes into multiple tracks? Is there a way to do that?

I found another solution too through Garageband. I don't know if it was easier, but I liked this way of creating seperate tracks.
First, You put the long track into Garageband.
-then you create a New Basic Track under Track Tab-create as many of those as tracks you want to make
-also make sure the headphones button is lit up under each New Basic Track-this allows it to be a 'solo' track.
-then you can start cutting music-with the long strip find where you want to split into a new track and drag that half down into each New Basic Track.
-Once you are done, press Option Z and a purple little triangle will appear up by the measures. drag the triangle to the end of the first track-this allows it when sharing to itunes to just record the particular track you want, it puts a stop/end to that track.
-then, make sure the track you want to share is highlighted the bright orange and go to share, 'send to itunes'
-it will send that to itunes and you can rename it in itunes.
-Go back to Garageband-delete the first track you successfully shared and move the next one up to where that one was. Slide it accross to the left so it is at the beginning, press option Z and move the purple triangle where you want it to be...and you are good to repeat until all your tracks are done!
I am a very visual person, and this helped to see where I was cutting each track, just another way!

How do you monitor audio?

I have a few questions about monitoring audio in my fcp/stp projects.
Currently, I have a g5 quad that has an optical toslink output, that I use to connect to the optical in on a good denon home theater receiver (avr 3801). This is how i output my mac's audio. I have two B&W bookshelf speakers as my monitor speakers.
Is this acceptable to use to monitor my sound for my editing projects? I am not doing much music work, mostly just voice track cleanup on my video projects.
How do you connect audio equipment in your setup to monitor audio?
I am thinking of buying an Alesis 12 track multimix firewire mixer, is this a better interface to use and do I route the signal from the multimix to the receiver to get to the speakers, or should I just get powered monitor speakers and connect them to the mixer?
Also, when editing audio, which is mostly dialogue, is there a volume setting I should keep my receiver at and just work the levels in stp to get the volume right? My receiver has a volume level from -60Db to 0 to 18Db. I am worried about setting my project audio to high or too low.

Giving advice such as saying <Your B & W speakers might be good enough for the job, their lineage is as a studio monitor for the BBC. If you paid over $500/pr, and they sound good, then they're probably good enough. You can use them with a mixer hooked-up to your Mac and outputted to the Denon like in your current set-up> is so cool, if that was the case would,nt you think for a quick minute they would be recomended by pro or advertise as nearfield monitor and not hi-fi.
<conveinient to buy active monitors.> that ain't the case active monitors are made for monitor audio interms of listening to frequency that would be imposible to hear on hi-fi speakers which is the opposite of hi-fi which is more colour-full and does'nt give the true sound, also because its self-power and easy to plug and play.
<The playback volume you use is relative. Most of the engineers I've worked with over the past 30 years prefer to listen back at higher volumes> most pro enginineer listen to mix at very low D.B so as to know exactly what there getting, and after crank them up to hear the over-all levels, any engineer that linsten at loud D.B. does that to show off in seeking attention fr. clients making them feel as if the mix or the song is all that, take it outside the studio and its a different story! <listen back at higher volumes than I'm comfortable with,> thats what i have just explain.
<As far as the levels within the track are concerned, that is all done in the software, again per your preferences, and with an eye on the meters.> it would be nice of you to explain what meter are you talking about, and if it was all so easy with eyes on the meter, dont you think every mixing engineer or anyone attempting to mix would all were glasses, meter in sofware aren't the same as the meters in a pro studio, nor is it the same in hardware, also not all meters are the same where as mixing is concern, they are special meters prefreable know as V.U. meters, check below and you'll all get a better understanding of what i have just out-line, before giving wrong advice of monitor audio.
http://johnvestman.com/meter_madness.htm
Fr.BlayZay.

How can i make audio player with osmf??

i want to know how can i make audio player with osmf and flex4.5 ?

Thanks again...I suppose I'd just like it louder in case the radio is on when the directions are given. The difference between the iPhone & Nokia is like night & day!
BTW, do you know if the Maps program is using data from my cell phone plan as we drive? Or are the corresponding maps downloaded into the phone once for the trip?
Thanks again!!

How do you make it so that the ipod will play all the different artists featured in an album when you click that album to play?

How do you make it so that the ipod will play all the different artists featured in an album when you click that album to play? At the moment, each artist in the album is being separated and I can't play them together. For example, to play the Halo 2 Soundtrack, Hoobastank, Breaking Benjamin, Nile Rodgers, etc. are some of the artists featured. However, in the Albums category, they are each separate choices. I want to play them all together, but can't. Is there a way to do that?

It sounds like the album metadata is incorrect, or differs from song to song in iTunes. Albums with various artists will play properly assuming all the songs are tagged with the same identical album name, as well as the track number. For the Halo 2 Soundtrack, metadata should look like this:
Song: <Song Title>
Artist: <Song Artist>
Album: Halo 2, Vol. 1 (Original Soundtrack)
Genre: Soundtrack
I had a similar problem with my imported Cowboy Bebop albums and the mixture of artists/album names. Once I adjusted the metadata, all of them play in the correct order just by selecting the Album from the available list or in Coverflow.

How do you move a track region in Garage Band to a new starting point without altering the existing length of the track?

How do you move a track region in Garage Band to a new starting point without altering the existing length of the track? Thanks.

What exactly are you trying to do? You can drag any region by grabbing it in the middle of the upper area with the highlighted name of the region. However, if you move it towards the end of the track, the length of the track will get longer, to accommodate the extra part of the region. DO you want to speed up the region, to shorten it or do you want to trim it? You can simply grab the right margin of the region and drag it, to make the region shorter.

How do you import multi track wav files

How do you import multi track wave files into Logic Pro?
These files are form a Sound Devices 664 mixer.

Is this a 5 or 6 channel single wav file?
I don't believe Logic will import these but can't be 100% sure because I'm not using the very latest version, I'm at 9.1.5 because it's stable. I do know that "SoundTrack Pro" that shipped with the disk version of Logic can export multichannel files so I'm guessing that it may very well open them as well. Soundtrack Pro has been discontinued but if you do have it, make sure it's the latest version.
Or... if you know anyone with the Nuendo DAW, it will open multichannel wavs which you can then export to any format you wish.
Might also want to look at "Reaper" it may well open Multichannel WAV files and has a 30 or 60 day trial license and only costs $60 for a license. An amazing DAW mainly developed by a single individual.

How do you convert audio to ac3 in DVD SP 4 without a.pack

how do you convert audio to ac3 in DVD SP 4 without a.pack
thanks
Josh

NO. If you let DVDSP make your encoding you'll get uncompressed audio (AIFF/PCM) what means most probably high bitrate issues during building/playback and a lot of the space of your disc.
Alberto

How to export unmixed audio tracks

I'm trying to export unmixed master edits so I can easily re-edit at a later date, but whenever I try the result is mixed. I thought there was a simple way to pan tracks for export
G4 Powerbook; Sony 1500A Mac OS X (10.4.8)

If you're just trying to export each track to it's
own individual file, here's how to do it:
Go to your Sequence Settings>Audio Outputs
Set the Audio Outputs to the same number as you have
audio tracks (8 tracks, 8 outputs).
Set them to Dual Mono (not stereo).
Save settings, go back to your sequence.
Control Click in the track target area of each
individual audio track. The top item in the
contextual menu is Audio Output. Set each track to
it's own output.
File>Export>Audio to AIFF
Select Channel Grouped
Now you'll get an AIFF for each track in your
sequence.
Thanks. Is there a way to export a audio/video Quicktime with mono tracks 1 & 2?
G4 Powerbook; Sony 1500A Mac OS X (10.4.8)

How do you make audio tracks independent?

Similar Messages

Maybe you are looking for