How do you make one long track into multiple tracks?

How do you make one long track in itunes into multiple tracks? Is there a way to do that?

I found another solution too through Garageband. I don't know if it was easier, but I liked this way of creating seperate tracks.
First, You put the long track into Garageband.
-then you create a New Basic Track under Track Tab-create as many of those as tracks you want to make
-also make sure the headphones button is lit up under each New Basic Track-this allows it to be a 'solo' track.
-then you can start cutting music-with the long strip find where you want to split into a new track and drag that half down into each New Basic Track.
-Once you are done, press Option Z and a purple little triangle will appear up by the measures. drag the triangle to the end of the first track-this allows it when sharing to itunes to just record the particular track you want, it puts a stop/end to that track.
-then, make sure the track you want to share is highlighted the bright orange and go to share, 'send to itunes'
-it will send that to itunes and you can rename it in itunes.
-Go back to Garageband-delete the first track you successfully shared and move the next one up to where that one was. Slide it accross to the left so it is at the beginning, press option Z and move the purple triangle where you want it to be...and you are good to repeat until all your tracks are done!
I am a very visual person, and this helped to see where I was cutting each track, just another way!

Similar Messages

How do you make one long clip camera import FCPX

Does anyone out there know how to make one long clip from a DV camera import in FCPX??? Why the designers thought it was a good idea to chop the clips up during import is beyond me...

You're expecting one continuous take to import as one single clip, right?
From my experience with DV-format cameras like the Canon HV20, it's not unusual for there to be enough of a discontinuity (control track??) to create two or more successive clips when importing, dropping a small number of frames between clips. This could be caused by dirty heads or a tape that has been used more than it should.
A string of separate takes should import as separate clips, I believe.
Hope this helps.

How to split one long file into multiple tracks?

I have a single-file recording of a vinyl record (containing multiple sequential tracks) that I want to export to multiple separate tracks. Is it possible to take thisfile of audio, add markers to it and export that file from multitrack view into separate tracks? I know its possible to do it using markers and to export a CD list and the burning to CD, but can you export to multiple gapless WAV files instead, with the markers as track/split points?
I am not burning to CD, just wanting to keep the tracks as files.

Once you have added your markers and merged as for making a CD you can then use the Batch Process Marker Regions (next icon along from the Merge icon in Marker list) to save out the marked regions as individual files.

How can you make one button preform different actions in Xcode?

How can you make one button "preform a click" and "orderfront"? Is that possible? Because what I am doing is making a welcome window to my application for Mac OS X 10.6, and I have two buttons in that window, one says "Connect" which connects a a WebView to a url and the other button opens up the main window. So how can I a make a button do multiple things at once??

Ah - If you are just using bindings between various objects from Interface Builder, you can reduce your application code a bit (sometimes quite a bit), but there is only so far you can go. Typically variables and routines are defined in your application that Interface Builder hooks into, so that your application code (usually Objective-C, but can be others) can use these variables and routines to determine what is happening in the user interface.
I'm not sure how up-to-date the project code is (or what programming code you are familiar with), but you can take a look at Apple's Cocoa Application Tutorial to see what is (usually) involved in creating an application.

How do I make one long WAV (or mp3) from downloaded fil

Just picked up my Zen Xtra (30GB) yesterday, and I think I'm gonna love it, except for those ga
ps.
Regarding those gaps, after some research here and elsewhere, I found that I can use EAC's "Copy Image and create CUE Sheet" function to make one large file of all the tracks on a CD merged together and then send that image to the Zen Xtra, and this clears up the ga
ps.
My problem is that most of the music I plan on putting on the player is downloaded li've music (legal, of course), and I can't for the life of me figure out how to create one long file from the tracks when they're on the computer, not a CD (and burning a CD just to create a file kind of defeats my purpose for getting the Zen Xtra... I'm sick of burning).
The gaps haven't really affected me with other music I've put on, but it's going to annoy the heck out of me if I get one in the middle of a sweet Scarlet > Fire ;-)
Thanks for any help in advance...
-JoshMessage Edited by joshamy0 on 04-20-2005 09:05 AM

Or you read the?BEFORE you post, READ THIS FIRST (FAQ) post (search on "gapless playback")
I know that?Easy CD-DA Extractor will encode all as one file, but this is shareware, and I'm sure there are freeware solutions.

How do you make a audiomixdown of 4 Audio Tracks in a Sequenz ?

I have the following Problem.
A Sequenz with 4 different Audio tracks. 2 Tracks with ambience sound,1 channel with voice over and 1 channel with the interview sound.
For the final playout i need on channel 1 the final mix of all 4 tracks and on channel 2 the IT Mix (ambience sound and Interviews sound).
Now my question how do i make a audiomixdown of the different channel , with the Avid mediacomposer it is quite easy you select the desired tracks and make a mixdown. Is there also an mixdown option in Finalcut?
Thanks for the help.
Jan

Welcome to the forums.
Well, you can ASSIGN what audio channel the various tracks of audio get output to. But I don't think you can do what you are asking. Because once you assign track 2, 3, and 4 to go out CH 1, then you cannot again assign them to go out to CH 2. The sound can only go out one channel at a time.
Best thing would be to export AIFF files from the timeline with all the tracks you need...turn off the ones you don't need when you export for CH2.
Shane

How do you make one video clip constantly switch colors?

I am trying to make it that one video clip switches from one color then to another color then to another? I also don't want to break up the clip into multiple clips then just change the color on each sub clip because when I tried that, it wouldn't load well in playback because there were so many effects in a couple of seconds. Please help me, thanks!

When you say 'switch from one color then to another color' do you mean you want the clip to show in shades of a single colour ranging from black to your colour and for that colour to change, or that you want the colours of the image to cycle so that red becomes blue, yellow becomes green and blue becomes red?
If it is the 'shades of a single colour' you want, apply the 'Cast' effect from the 'Looks' section of the effects palette and use keyframes to animate the Midtones parameter.
If you want to colour cycle, apply my free 'Gradient Colorize a4d' effect, edit the colours in the gradient and keyframe the 'Offset' parameter which cycles the gradient colours through the image. If you're interested I could create a free effect that could cycle through the colours in a gradient automatically.
Download 'Gradient Colorize a4d' from my blog:
http://alex4d.wordpress.com/2012/03/22/11-colour-fcpx-filters/
@alex4d

ANE?? - How do you make one?

I am looking into creating an air application for the desktop that uses some java to do some things that would be faster done in java then in air. I am wondering how to package all my java ode into an ANE? for Flash Builder 4.6. Every where on line sais what an ANE is, no where does it say, "heres how to take some ode and create one."

Adrien,
This page on the Adobe AIR Developer Center is a good place to find all info around creating and using ANEs: http://www.adobe.com/devnet/air/native-extensions-for-air.html
Hope this helps,
Mallika Yelandur
Adobe Community Help & Learning

How do you make one computer slave to another?

My cd-rom doesnt work, and I want to install some programs using my friend´s cd-rom.
How do you set the computers up so that his computer can be the slave (or mine???) and that the software is being installed onto my disk?
Is there a shortcut when starting up the machine?
Thanks,

See if the information in this document is useful to you:
http://docs.info.apple.com/article.html?artnum=58583
Tuttle

How can I make one slide that contains multiple slides?

Hi, I want to make slideshow for presentation. And I want to know how can I make this slide.
For example in this picture, have 1 main slide and 6 sub slides. I want to make slide like this, and all slides should be in one slide. And I want to zoom in to sub slide when I click and then zoom out when I click one more. And then second slide should be zoom in when I click and zoom out when I click again. And then slide 3 etc.
I want to know how can I do this.

There are two ways to do this.
1. Duplicate the main or first slide numerous times - as many as you'll need for the show, which looks like 6 including the first "overview slide".
2. You know have two choices - either use the Magic Move transition between the first slide and the next, which has the main box centre screen and enlarged proportionally.
3. Or enlarge the slides so that the main point is central, but use hyperlinks to move between the slides. This also gives you the liberty of changing the order spontaneously should the situation demand. Using the main first slide, place an invisible box around each element and use a link to move to that slide which is enlarged. Then you have to decide if you will come back each time to slide 1 (the overview) by having the whole slide hyperlinked to slide 1, or the whole slide linked to the next slide. That way you don't have to go looking for the hyperlink area.
The Magic Move effect will give your presentation a "Prezi" like effect, while the hyperlinked version I've described will just use gentle dissolves between each slide.
I will sometimes use 3 because I want to encourage audience participation and let them choose where to go next... e.g., the various elements of a 747 wing assembly, or the interior of a large cruise ship, showing state rooms, dining, pool area, ballroom, etc.
Les

Splitting a Track Into Multiple Tracks...

Does anyone know if you can take a long audio file and split it into multiple audio files (or tracks) in Garageband or any freeware programs designed for Mac? If so, PLEASE be of assistance. I can't figure it out for the life of me. Thanks very much for any help!
MacBook Mac OS X (10.4.8)

Any audio editor can split up an audio file:
http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
You could also use GB's Split MenuItem to, well, split up a region and put the pieces on their own tracks. If you wanted to go this route, here's a tutorial whose main point is different, but whose technique is what you want to do if you read through it all the way:
http://www.bulletsandbones.com/GB/Tutorials.html#allabouttransferringlps

Got two apple ids on an ipod touch. How do you make one the default?

Got two apple ids on an ipod touch. One child shared account with other sibling. Has now set up own apple id and wants that one to be default id. Every time goes to apple id, shared one comes up. How do we change the settings so that new id is the default?

Without knowing what you are doing when the other ID pops up:
CHANGE ID
The ID is used in the following locations and y have to change them.
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>GameCenter
Settings>iCloud
and Settings>iTunes and App store
You have to sign out of ID (for iCloud you delete the iCloud account from the iPod) and sign in with other ID.
Note:
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.
If the iPod has iOS 7 then you have the enter the password for Apple ID presently sign in Settings>iCloud.
Also, a Restriction can be set (Settings>General>Restrictions) the prevents changing accounts

How do you make one timeline stop?

i currently have my animation looping but i want to set it up so that one of the layers/animations on my timeline do NOT loop (just fly in once)... i tried adding a stop(); but it seems to stop everything that is moving instead of just the target timeline.

A stop() is a timeline level command, and a timeline can include several layers, meaning every layer on a timeline can be impacted by a stop() on one layer. I can't tell how you've designed your animation, so you'll need to explain that if my guess at a solution that follows isn't on target.
Create the one animation that you want to have stop as a movieclip unto itself. You can do this by copying the frames and pasting them into an empty movieclip symbol. Place a stop() at the end of the timeline inside that movieclip. Place that movieclip in the timeline where you copied the frames, in place of those frames.

How do you make one of my mail inboxes have junk mail sent to the junk folder, and the other inbox not mark anything as mail at all?

One of my mail accounts has stuff that can go to my junk folder, but the other account has stuff that I do not want marked in any way as junk and for it to stay in my inbox! How do I do that?

my problem exactly. Did you ever figure it out? I had to resort to turning off labels in the web interface for Gmail. Not ideal

In a tubular form: how do you make one combo box reflect another

For example:
if there are two fields, one with combo box with bread, meat, juice and I select juice, I and the contents of another combo box in another field to say Orange, grape, lemon.
field one field two
bread orange
meat grape
juice lemon
in field one there is just those 3 but in the table representing two there are many such as types of bread and meat and juice, all three.
Hope you can understand this example. Thanks for your help.

Your description is not very clear but looks like you want cascading select lists, where 2nd select list is populated based on value selected in the first select list.
AJAX is a good solution if you are comfortable with it. Since I'm not very familiar with that, I end up using pl/sql.
Someone had asked similar question few days back, and i had provided a detailed answer. You can check it out at:
Re: select menu depends from selection
Hope this helps.

How do you make one long track into multiple tracks?

Similar Messages

Maybe you are looking for