How do you make RAM faster without upgrading RAM?

I have a Mac Mini 2014 and you can't upgrade RAM in it. Is there a way to make my RAM faster?

iMovie_Maker wrote:
Do you think 4 GB is enough
Enough for what?
The engine in my car puts out 200 HP. That's more than enough given the power to weight ratio of the vehicle and considering the type of driving I do with it commuting to work and the occasional road trip. If fails miserably when attempting to drag race the guy down the street with the Dodge Viper putting out somewhere around 660 HP.

Similar Messages

How do you make audio fast without changing pitch?

How do you make audio fast without changing pitch?

PrPro may have that but I've always just gone over to Audition ... you change speed there, you're given a choice of keeping the pitch the same or allow it to change. Note ... if there's much cha ge in speed the result can be odd.
Neil

How do you make multiple libraries WITHOUT replicating similar directories?

I have two ipods and one ipad
On each, I have some of the same music, and more importantly, many of the same movies AND podcasts.
I can't figure out how to use multiple libraries that share files (on a SINGLE COMPUTER).
For example, my three libraries ALL seem to want to create a directory for the exact same podcast, which then stores the files three seperate places, killing my hard drive space.
How can I tell each seperate library to only look in one location for the podcast / movie / music files?
Message was edited by: tvmaster

For some reason, I could only add items IF the ipad was hooked up, is that correct?
No.
You don't need anything connected to create playlists.
If you selected the iPad and created playlist directly on the iPad through iTunes, yes you would need it connected to edit those playlists.
But don't do it that way.
Just create them without the device connected.
Also, you don't need playlists for everything. Mainly music.
In iTunes, you can select the device (when connected) and click the Movies, Podcasts and *Music Videos* tabs and select what to sync. You can make different selections for each device.
For music, create a playlist for each device to have differnt music on each device.
Connect the device, click the Music tab, tick *Sync music*, then *Selected playlists* and tick the playlist you want on that specific device.

How would you make datacopy faster in a calc?

I have a calc that looks like this and it's running quite slow because of size of data.
FIX (Scenario, Version, Product)
DATACOPY Salary>Year to Salary_Copy->Year;
DATACOPY Marketing->Year to Marketing_Copy->Year;
DATACOPY Training->Year to Training_Copy->Year;
ENDFIX
- Salary, Marketing and Training are from the Account dimension (dense). The Salary_Copy etc are also in the same Account dimension in a different tree.
- Scenario, Version and Product are Sparse.
- Year is dense
Before looking to tune other things like hardware, I wonder if I could write the script any better. For example, see below... But my question is whether DATACOPY or direct is faster? Second is whether I should put "Year" as part of the FIX or should I be using cross-dimensional operators instead?
FIX (Scenario, Version, Product, Year)
Salary = Salary_Copy;
Marketing = Marketing_Copy;
Training = Training_Copy
ENDFIX
Thanks for any help in advance.
Edited by: user634643 on Aug 4, 2009 5:39 PM

GlennS_2 wrote:
First, in your fix are you fixing on the dimension names or actual members. For example fixing on the entire product dimension will be slow, fixing on levmbrs(product,0) would be much quicker.
I actually like the second method you describe better than the first. It is even better if you wrap them in a block statement Shown below, so only one pass is done through the database.
FIX (Scenario, Version, Product, Year)
(Salary = Salary_Copy;
Marketing = Marketing_Copy;
Training = Training_Copy
ENDFIXIf we wrap into one block statement will it affect the Essbase to make use parallel CPU threads in data copy execution?
Thanks!

How do you remove the case to upgrade the ram for a dm-1 4142 pavilion notebook.

How do you remove the cover to upgrade the rem for a Pavilion DM-1 4142? Does it just snap off?

Is this the HP Pavilion dm1-4142nr?
The RAM bay is generally on the bottom of the notebook. See the RAM Upgrade Guide for details.
Larry
Please click the White Kudos star to say thanks for helping.
Please mark Accept As Solution if my help has solved your problem.

Hi my macbook pro is very slow ,anyone can suggest me how can I make is fast?

Hi my macbook pro is very slow ,anyone can suggest me how can I make is fast?

Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.

INFORMIX JAVA(JDBC) ORACLE - how can I make it faster?

I have some rows from INFORMIX (180 rows is max) - now, I have to put it in ORACLE database. How can I make it faster - write 180 rows in a loop by ONE MERGE per ROW - is a bad IDEA, I think. Is there a way to make it right?
Thank you.

Why use a loop at all? Why not just do it in 1 statement? Even if you are reading from a flat file you could use an external table. How slow is it? How fast do you expect 180 statements to process? What version?
You have not provided enough information to provide much of a useful answer.
You should also be using the latest JCBC driver as they are fully backward compatible and the newer ones are more performant, more feature rich, and may simplify your future upgrades.
-LC

How do you make adobe X open the "combine pdf" window in the foreground?

This may not be the correct forum for this question, but considering that I simply
have not been able to get a reply in any other Adobe forum, I decided
to just post this question to ALL Adobe forums until I get a response.........
How do you make adobe X open the "combine pdf" window in the foreground?
I am using a "Windows 7" computer at work with "Acrobat X Pro" and I'm constantly combining
pdf's and tiff's in Acrobat.
It would be nice if when I select 30 or 40 files to combine, the *******
"Combine Supported Files in Adobe Acrobat" window would open in the
foreground, not behind the 10 or so windows already open.
I have been researching this for some time now with no solution.
If the answer is that "IT CAN'T BE DONE", then that's fine. At least
I will have an answer and can stop searching. If (as I suspect) it can
be done, then kindly supply me with "step by step" instructions.
Michael Jones

Hi ,
I guess that was a bug in that version .
It does not happen in Acrobat XI and Acrobat DC .The window comes right in front of everything else .
I wonder that was a bug and that was fixed the other versions.
You could upgrade to the latest Acrobat version ,i.e Acrobat DC and you would not experience this anymore .
Regards
Sukrit Dhingra

How do you make Mozilla listen to users and stop FFFFirefox Auto Updating despite being set to NOT auto update?

I am spitting nails
After all the STUPID problems outlined here
https://support.mozilla.org/en-US/questions/999831?esab=a&s=&r=0&as=s
I set Firefox to stop auto updating,
Then the other day I installed a new user on my laptop, when they loaded Firefox it auto updated MY version of Firefox.
Has NOTHING been learnt?
STUPID STUPID STUPID STUPID STUPID
So I have 2 questions
How do you make Mozilla listen to users?
and how do prevent what happened to me happening again?

SuperSluether
Not a millionth, you have only provided 150 answers and I doubt they were all this issue.
If you don't like it, don't use it.
If a business took this attitude they would soon be out of business
Updates help KEEP YOU SAFE
Sometimes, but in my experience FFirefox updates can really screw up your system, lose you data, mess up your user interface. I have run IT for one of the biggest intranets on the planet and we never allowed even Mictosoft updates until we did User Acceptance Testing and understood the impact of the upgrade. I am a grown up not a child, I have system where I test updates for performance, security and impact, I WILL DECIDE when I want to install it. If Mozilla wants to provide real security updates I would take them but if you look at the link in my OP you will see it said an update was security and it completely messed up.
Updates add tons of great new features
Actually with FFirefox in my experience they take more away than they add, things I did not ask them to take, they do not look at my config and leave my settings as they were and then tell me about new options, no they completely screw my productivity as it takes days to figure out how to undo the kwap they have added. Copying the AWFUL Chrome interface is not an improvement, Google has one of the worst UI's on the planet accross all their products.
Firefox is designed to be customized PER USER, NOT CROSS-SYSTEM
There are some things that benefit from being per user and some that are per machine, windows has group policies per machine and per user. My OP is telling Mozilla that this is another area where they have "designed" badly, I tell them this so that they improve it and in the vain hope that there is some config setting that will stop this nonsense.
So SuperSluether you have not really helped, all you seem to say is FO if you do not like it. Good job you do not run a business. With that attitude probably best you do not contribute.

How do you make imessage work? The icon is there. You can type in the recipient but are not allowed to hit the send button

How do you make imessage work? We upgraded to verision5. The icon is there. You can type the message but the send button is not available.

There is some instability in iMessage. It is a versatile and confusing app even though there are so few options in its use.
I had issues trying to get iMessage work on both my iPads and my iPhone.
ON the iPhone, turning off WiFi service and then trying iMessage fixed the problem.
On the iPad 2, same thing. Turning off WiFi service fixed it.
On the iPad 1, I took a suggestion from zoomzoom and changed the WiFi network configuration on the iPad to use 8.8.8.8 as a DNS server and then use iMessage. That fixed it. Now I put the DNS back to default and it still works.
I suspect the iPod Touch will have the same fix as the iPad.
If you have a WiFi and 3G iPad or iPhone, try turing off WiFi and see if that fixes it.
Why? (beware, some of this is guesswork)
iMessage can talk SMS to cellphones and smartphones (that are using the cell-network). It can also talk Apple iMessage format to iPhones and iPads whether they are on cell-network or on WiFi. If you are talking to an SMS cellphone, iMessage figures that out and blindly sends your message. If you are talking to a iOS5 device, iMessage figures that out too, checks to see that they are on-line, and then does something different if they are or are not on-line. If you type in an email address, and not a phone number, I think iMessage attempts to see if the email address is registered with Apple (or iCloud or whatever) and if it is not, it does something to let you know, possibly by making the Send button not light up.
In order to register iMessage and an email, you have to let the iOS device see whatever service it is that iMessage uses. That is where the problem happenes. zoomzoom suggested manually setting the WiFi DNS to google's 8.8.8.8 IP address, then run IMessage, and that seemed to fix the problem. Setting the iOS device to use 3G-only (by turning off WiFi) also fixed the problem. I suspect going down to StarBucks or McDonalds and using their WiFi would also fix the problem. Once the problem is fixed, it doesn't seem to come back so I can't test these 'fixes'.
To change the DNS on your iPad find your WiFi networks configuration, click on the blue arrow, touch DNS, backspace over the number that is shown, type in 8.8.8.8 Then click on the WiFiNetworks button at the top of the screen. Now go run iMessage. After that, you can delete the DNS entry again and leave it blank. Your iPad will fill it in from the WiFi router when it needs it.

How i can make a backup without separate hdd?

How i can make a backup without seperate hdd?

how i can partition the hd? please step by step...
today it's my first apple-day ... i was 18 years windows user
While I agree with everyone else, get a second disk and backup to that disk, I will point you in the directory of partitioning.
Applications -> Utilities -> Disk Utility
Disk Utility may or may not be able to carve a new partition out of your existing partition, depending on whether the end of the current partition is unused so the current partition can be reduced in size and a new partition added.
It may be necessary to use an external disk, clone your internal disk using SuperDuper or Carbon Copy Cloner (both free to use when creating a full clone), then partition your internal disk, and finally restore the external clone to the internal disk again using SuperDuper or Carbon Copy Cloner.
If you do not want to get a 2nd disk, then consider using an on-line service such as CrashPlan, Carbonite, Mozy, etc... for the files you absolutely cannot aford to loose.

How can you listen to music without headphones?

How can you listen to music without headphones?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

How do i make an account without the us of a credit card

How do I make an account without a credit card??

Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Step 3 is important, no matter whether you do this on a Mac or an iPad / iPhone:
Important: Before proceeding to the next step, you must download and install a free application. ...
Important: Before proceeding to the next step, you must download and install the free application by tapping Free followed by tapping Install App. ...
To summarize, you must first download a free app from the App Store. When you are asked to sign in with your Apple ID, select "Create new account". Accept the terms and conditions checkbox, then click Continue. After you enter all the requested personal data, click Continue.
When you are asked to select a payment method, select "None".
That's all there is to it.

How do you make a patch list display the actual patches?

The Large Patch Display and the Selector controls show the current patch and a list of available patches respectively.
However, if I drop a "Compact Patch List" or a "Full Height Patch List" on the screen, it only displays "Set Name" and "Patch Name" values. How do you make it show the available patches?

Is it that you want to only see patches without sets, or that you more patches than are displaying in the list?
Either way, you can change both of these things in Layout. Select the patch selector object then in the Inspector on the left you have some display options.
Hope that helps!

How do you make Dropdown Menus?

Basically the title says it all: "How DO you make drop down
menus?"
Thanks

Check the uberlink and MacFly tutorials at PVII -
http://www.projectseven.com/
and the Navbar tutorial/articles at Thierry's place
http://tjkdesign.com/articles/dropdown/
Or this one (more recent article):
http://tjkdesign.com/articles/Pure_CSS_Dropdown_Menus.asp
Or to get it done fast, go here -
http://www.projectseven.com/tutorials/navigation/auto_hide/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ForensicBop" <[email protected]> wrote in
message
news:f1t54n$m5b$[email protected]..
>I don't have CS3...I have dreamweaver MX2004.
>

How do you make RAM faster without upgrading RAM?

Similar Messages

Maybe you are looking for