How do you make the black area in an FLV playback white or transparent

Trying to make the FLV playback black area white or
transparent, because there is a black flash that shows up when play
the movie. I am trying to alleviate this by changing the black area
to another color or alpha.

In your publish settings, click on the HTML tab and look for
a field entitled 'Window Mode'. One of the choices is 'Transparent
Windowless'. This should work if you have objects that don't have
backgrounds. If you are looking to make video transparent, so far
in my experience, the only video I have been able to make this work
with is a Quicktime Animation with the RGB + Alpha. Also, when you
import your video to the stage, make sure to click on the 'Encode
Alpha Channel' box. That will give you the transparency you're
looking for.

Similar Messages

  • How do I make the Black in Pages True Black? I make Newspaper ads and they are starting to look anemic.

    How do I make the Black in Pages True Black? I make Newspaper ads and they are starting to look anemic.

    Sorry Eric but that is the wrong specification and will produce a muddy brownish grey with possible registration problems particularly in small type as well as being wasteful on ink.
    drdigest
    Open the Color Picker > click on the color slider tab > click on the color mode patch > choose Black & White > Brightness: 0% (black patch) > drag down to recognisable swatch below
    To label it > click on the color sets tab (3rd tab) > click on the gear > New > Rename the set "DrD's > drag down the swatch from the bar above > Label that 100k > click on any stray swatches and rempve by clicking on the - button below
    These swatches are System wide and available to any application that accesses the Color Picker. Unfortunately Apple has not seen fit to make them easily transferrable or saveable and importable.
    Make the 100k swatch part of your Styles in the Styles Drawer, particularly the text to ensure it is used, you can't spot it on screen and there is no feedback anywhere that it is selected.
    Peter

  • How do you make the background of an object transparent in Adobe Illustrator?

    Hello Forum.
    How do you make the background of an object transparent in Adobe Illustrator?
    I have been having issues with using the Magic Wand tool in Adobe Illustrator as well as the lasso tool.
    Basically, I am trying to put a small graphic into a new Illustrator file.
    The first thing I tried to do is to use the magic wand tool.  But I found out that this did not work on a jpeg image since it did not have any individual objects to select.
    So I tried something new.  I opened the file in Adobe Photoshop and used the lasso tool to select an area.  Then I coped this area.  Then I tried to paste it into Adobe Illustrator.  But the background was not transparent for the pasted image.
    How do I make the background transparent.
    I made this small video to show what I am talking about:
    http://youtu.be/2LgMGEF6z10

    Don't Copy/Paste the image.
    Make it transparent in Photoshop, save a PSD and place it in Illustrator

  • In windows 8 how do you make the bookmarks column "flexible"? I used to be able to make it narrower.

    Windows 8 how do you make the bookmarks column "flexible"?

    Is the problem with the Bookmarks Sidebar -- the one you can open and close by pressing Ctrl+b? It does seem to have a minimum width and won't get narrower than that, but I'm not sure whether you are running into that limitation or whether for some reason you are not getting the resizing arrow when you mouse over the thin border between the sidebar and the page.

  • Tried the posted solution for the RETR problem and it works once then it returns. How do you make the change permanent?

    Tried the posted solution for the RETR problem and it works once then it returns. Once the email dl'ds the file deleted per the instructions returns. How do you make the change permanent?

    Hi DOC808HI
    # I don't know what you mean by "posted RETR solution". Could you please post a link to the suggested solution? Perhaps you are referring to this thread: https://support.mozilla.org/en-US/questions/991792 ?
    # Anyhow any further troubleshooting information you can provide will be great e.g. Your Operating System Version (XP, 7, Mac OS X Mavericks), your anti-virus if any, your mail provider, your ISP, what you did, what happened with exact error message, what happened
    Cheers!
    ...Roland

  • How do you make the sentences you input in a drop down list wrap to the next line?

    How do you make the sentences that you input in a drop down list to wrap to the next line?

    You can't.
    see this thread for more info:  Can you set drop down list as multi-line???

  • TS2755 Is there a fix to deleting already deleted address book contact, from messages search? i.e. when you type in say letter c in messages search, all contact with a c, past already deleted and current all appear?  How do you make the old deleted ones a

    Is there a fix to deleting already deleted address book contact, from messages search? i.e. when you type in say letter c in messages search, all contact with a c, past already deleted and current all appear?  How do you make the old deleted ones appear?

    only way is to restore the phone as new.  OR wait until IOS 7 comes out in the fall.

  • On a 5s how do you make the light turn off when phone rings or when you receive text, at work I would like to shut that off. Also seems like vibrate doesn't always work?

    On a 5s how do you make the light turn off when phone rings or when you receive text, at work I would like to shut that off. Also seems like vibrate doesn't always work? I had a 4s and didn't have these issues

    Thank you, I did find that. Still my phone does not always vibrate when ringer is off for texts and calls, only sometimes?

  • HT4111 how do you make the hippih keyboard pair with an ipad

    how do you make the hippih keyboard pair with an ipad

    I know this question is old but I just found out the real answer. After you turn on the little switch on the left side of the HIPPIH AppsKey Keyboard and the blue light blinks, I want you to look just above it.   Do you see that hole right above the word PAIRING?  Go grab a paper clip and press down in to the hole for about 2 seconds.   This sends a signal to the ipad and in the BLUETOOTH menu you should see "Keyboard" under DEVICES. Click on it and dialogue box will pop up asking you to put in a passcode for the keyboard.
    It took me way too long to figure this out.
    Stupid recessed button.

  • I just synced my iPhone and lost all the info in notes from my phone. It was replaced with whT was on my iMac how do you make the sync go from phone to desktop and not the other way around

    I Just synced my iPhone and lost all the info in notes I had on the phone. How do you have the info sync from phone to desktop and not the other way around as I usually make contact changes etc on my phone. I would then like to be able to sync that info from desktop to ipad thanks

    It does make sense.  The iPhone is a one-person device and just syncs to one computer.
    The way it should work is as follows:
    Old computer content ---> New computer
    New computer <---> syncs to iPhone
    But the way you are trying to operate sounds like:
    Old computer content ---> iPhone
    ... and ...
    New computer content <---> iPhone
    So simply move your old stuff (either directly from iTunes, or from a computer backup) to the new computer, have it all there, then sync your iPhone to the new machine.

  • How do you make the velocity equal for a bunch of different notes?

    Whenever I adjust a bunch of notes with the velocity tool, if they started out w/ different velocities i can never get them to the same velocity. How do you change the velocity of diff. velocity notes to the same velocity all at once?

    You can do this easily in the inspector. Make sure the midi region you want to work with is the only thing selected in the arrange window. Then in the inspector set the dynamics to 'fixed', which will make all notes play at exactly the same velocity. Then using the velocity setting right above it, you can set precisely what this fixed velocity value should be for all notes. This is a non-destructive procedure, if you want to permanently apply these changes, use 'normalize region parameters' from the midi submenu in the arrange window once you've got it sounding how you want it. This will reset the parameters in the inspector back to zero so you can make further adjustments if you want, but all the settings you made will be written directly to the midi data. When you then open the piano roll, you'll see that all your velocities are identical.

  • How do you reset the Work Area Bar to auto adjust?

    This is something that's been a thorn in my side for a while. Maybe I'm just being OCD about it... but I've been wondering if there is a way, once you reposition the I / O points of the Work Area Bar (WAB) you can get Pr to go back to auto adjusting it to the end of your clip.
    You can double-click it to get it to expand to the full length of the sequence, if you remember to do that... Sometimes I'm in a rush, or I have 10 sequences and I miss the fact that my WAB is not all the way to the end. I select and batch drag them all to Media Encoder and *POW*... I've forgotten to stretch the Out to end on one sequence ... and I have to re-render. A pain, yes, something I should have double checked, but at 2am these things can get missed.
    So, can you get the Work Area Bar to auto adjust again?
    If yes, it's probably something ridiculously obvious – but I'll take it!
    Thanks
    Stephen

    I would have an issue with auto or a default  for a number of reasons.
    Not least this one...
    I now place dummy clip ( black video)  a  distance off the end of my sequence to prevent the End of Sequence Marker displaying at the end of my edited material.  I dont want that included in an export.
    Here is another...
    As I get to lock down and I am sending previews to clients...I insert Black Video head and tail of the edit so that the preview does not start  jarringly on first frame video.  I have I and Os marked so that I can simply  export "Program at length (without black head and tail) when I  come to master.
    and...
    Often I have edit versions (TVCs) on the same time line ( sequence) and I need to adjust WAB or I/Os to export them separately.
    Automating stuff to eliminate our dumb moments doesnt help much because it just opens the chance of another dumb moment driven by expectation and forgetfulness. .
    Mental checklist is the only way IMHO.

  • How can you make the iPod tell the diff between a movie and music video

    Greetings!
    How can you make iPod tell the difference between a Music Video and Movie? Everything I put up on the iPod falls into Movie. So is it something I have to do in iTunes?
    Thanks for the help!

    Rightclick the video in iTUnes, hit Get info then the "Options" tab. Beside kind you can set it to movie. music video. or TV show

  • How do you make the dashboard open automatically at login?

    Ok, you know in your dock you can right click on any application icon and it will come up with some options, one of them being "Open at Login." Well, I want to automatically open the dashboard at login, but when I right click on the dashboard icon it does not give that option. How do I make the dashboard open automatically when I log in?

    There is a freeware app called "Dashboard Starter" that will start the DB up when you log-in, or anytime you force quit the Dock.app.
    Search www.macupdate.com for it.
    iSMH

  • How do you restore the black background in safari top sites

    How do I restore the black background in safari from the dull gray to an acceptable black?

    Welcome to the Apple Discussions.
    No. The general theory is that the pics are easier to edit against black.
    Regards
    TD

Maybe you are looking for