How do you make the "other" in your phone smaller?

The "other" in my iPhone 5 is taking up 9 GB. I've tried restoring it many times but it still takes up around the same amount. I've unchecked things, synced, unsynced, you name it but it still isn't resolved. Please help!

Did you restore as new?

Similar Messages

  • I just synced my iPhone and lost all the info in notes from my phone. It was replaced with whT was on my iMac how do you make the sync go from phone to desktop and not the other way around

    I Just synced my iPhone and lost all the info in notes I had on the phone. How do you have the info sync from phone to desktop and not the other way around as I usually make contact changes etc on my phone. I would then like to be able to sync that info from desktop to ipad thanks

    It does make sense.  The iPhone is a one-person device and just syncs to one computer.
    The way it should work is as follows:
    Old computer content ---> New computer
    New computer <---> syncs to iPhone
    But the way you are trying to operate sounds like:
    Old computer content ---> iPhone
    ... and ...
    New computer content <---> iPhone
    So simply move your old stuff (either directly from iTunes, or from a computer backup) to the new computer, have it all there, then sync your iPhone to the new machine.

  • How do you make the background of your photo transparent?

    I have just cropped my pic using elements 12 and saved it as a png but it still has white corners around my circular pic. How do I get rid of the white corners?
    Thanks

    Rename the Background layer to anything else; this converts it to a "regular" layer. Select the white corners using the Magic Wand and Delete the selection. The white will be replaced by transparency.
    Initially, before you do the crop you can convert the Background layer. Then after cropping, with the circular selection still active, invert the circular selection and Delete.

  • When someone calls....how do you make the photo show in a small square?

    In the commercials for the iphone, when someone calls, the phone defaults to the wallpaper (in the commercials its most often the photo of earth) and the photo of the person is a small square in the upper right corner. When people call me, the photo I've chosen for them takes up the whole screen.
    How do I make my phone look like the phone in the commercial?!
    PS, I understand this question is pretty hilarious and non at all an important one.
    Message was edited by: Host
    To make Subject more descriptive

    Not silly at all, many have asked.
    In general, the answer is....
    When you sync contacts from your comptuter, if you are using a Mac or Outlook 2003 (I think) or higher, then in your computer's address book, you can assign an image. Your computer makes (saves) a thumbnail of that contact with your contact data. When you sync, that thumbnail comes over to the phone.
    When you assign a picture via the iPhone to a contact, it stores a full screen version of it instead of a thumbnail.
    So when a person calls, if the image was from a sync with a picture that was assigned from the computer you will see what you saw in commercials. If the image was assigned from the iPhone directly, then you get the full screen view when they call.

  • How do you update the itunes on your phone

    how do you update itunes on your phone?

    You don't update itunes on your iphone.
    itunes is built into the operating system.

  • How do you fix the sound on your phone if it works with headset only no ringing

    Everything works on my phone but the sound....I can plug headphones in and hear music but if no headphones are pluged in I hear nothing and when someone calls me I hear no ringing or anything?  Can someone please help me figure this out?
    Thanks

    Hi two864,
    If you are having issues with the audio on your iPhone, you may find the following article helpful:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Regards,
    - Brenden

  • How do you make the most of your Laptop resources?

    Hello,
    I was wondering what tricks do experienced Arch users apply to get the best performance (including the HDD settings and power saving techniques)?
    Please share your experience....
    I have a Samsung Laptop,  with broken BIOS for ACPI support. I had to modify my BIOS DSDT by hand to make ACPI working (details are  here http://www.azeemarif.co.nr).

    i personally use cpudyn for HDD spindown and laptop-mode-tools (see my repo) for kernel mode power saving... then again I don't run on battery that often

  • HT1212 how do you get the photos off your phone when it is recovery mode? My daughter has put a passcode on the 4s iphone and cant remember. After multiple attempts and then resorting to this support forum "iOS: Forgotten passcode or device disabled after

    My daughter has put a passcode on her dads iphone 4s and cant remember it and after multiple attempts it is now in "connect to itunes. My husband does not want to lose the photos on it. Is there a way to get photos off before restoring

    If that phone has been synced in iTunes, you can restore from the backup after having restored the phone.
    There is also a little mac app that can read the iPhone backups that are in iTunes,called ibackupviewer.
    Then when there is no backup of the iPhone: read the following aricle:
    http://www.video-converter-mac.org/recover-notes-from-iphone/

  • How do you get the restrictions off your phone without having to reset it?

    I forgot the password to my restrictions code and I don't want to reset my phone just to get the restrictions off.

    The only way to remove the restrictions without having to restore the phone is to remember the restrictions passcode. There is no way to bypass it, unless, as stefejobsfan points out, you have a backup that was made before the restrictions were put in place.
    If it could be easily bypassed, it wouldn't be worth squat.

  • Tried the posted solution for the RETR problem and it works once then it returns. How do you make the change permanent?

    Tried the posted solution for the RETR problem and it works once then it returns. Once the email dl'ds the file deleted per the instructions returns. How do you make the change permanent?

    Hi DOC808HI
    # I don't know what you mean by "posted RETR solution". Could you please post a link to the suggested solution? Perhaps you are referring to this thread: https://support.mozilla.org/en-US/questions/991792 ?
    # Anyhow any further troubleshooting information you can provide will be great e.g. Your Operating System Version (XP, 7, Mac OS X Mavericks), your anti-virus if any, your mail provider, your ISP, what you did, what happened with exact error message, what happened
    Cheers!
    ...Roland

  • How do you send the email to your backup email to reset your security questions?

    how do you send the email to your backup email to reset your security questions?  i need help i cant buy any songs because i dont remmeber my security questions and i dont know how to make new ones? HELP!!  thanks

    Forgotten Security Questions / Answers...
    See Here > Apple ID: Contacting Apple for help with Apple ID account security
              Ask to speak with the Account Security Team...
    Or Email Here  >  Apple  Support  iTunes Store  Contact
    More Info >  Apple ID: All about Apple ID security questions
    Note:
    You can only set up and/or change a Rescue Email Before you forget the questions/answers.

  • How do you make the sentences you input in a drop down list wrap to the next line?

    How do you make the sentences that you input in a drop down list to wrap to the next line?

    You can't.
    see this thread for more info:  Can you set drop down list as multi-line???

  • How do you make the background of an object transparent in Adobe Illustrator?

    Hello Forum.
    How do you make the background of an object transparent in Adobe Illustrator?
    I have been having issues with using the Magic Wand tool in Adobe Illustrator as well as the lasso tool.
    Basically, I am trying to put a small graphic into a new Illustrator file.
    The first thing I tried to do is to use the magic wand tool.  But I found out that this did not work on a jpeg image since it did not have any individual objects to select.
    So I tried something new.  I opened the file in Adobe Photoshop and used the lasso tool to select an area.  Then I coped this area.  Then I tried to paste it into Adobe Illustrator.  But the background was not transparent for the pasted image.
    How do I make the background transparent.
    I made this small video to show what I am talking about:
    http://youtu.be/2LgMGEF6z10

    Don't Copy/Paste the image.
    Make it transparent in Photoshop, save a PSD and place it in Illustrator

  • How do you transfer the data from your Ipad to a new pc?

    How do you transfer the data from your Ipad to a new pc?

    Sync with new computer
    http://discussions.apple.com/docs/DOC-3141

  • How do you get the answers to your security questions in order to buy an app on iphone?

    How do you get the answers to your security questions in order to purchase an app on iphone?

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (99852)

Maybe you are looking for

  • Opening a view in f4 popup

    Hi Experts, My requiremnt is to get a view as a popup in a f4 help. Product search is a different view IN  ICCMP_PRODUCT/PROSEARCH.I want this window as a popup in my f4 help on product in camapiagn in CPGOE_ABLOCKS/OVELProducts. I have created a OP_

  • MAPPING.NO_MAPPINGPROGRAM_FOUND in JDBC Scenario

    I have the problem:. The scenario I have is Abap Proxy -> JDBC asynchronous, configure everything you need and the system threw me no errors. But when running the interface the system tells me the following error: System failure <s:SystemError <detai

  • Financial Statement version error

    Hi, here i create Define financial statement version i am dong the new entries this folw i am nentioned Financila stament version code, and given description and maintain language, and the select "Item Keys automatic" and given Chart of acc. and did

  • OPMN service still running but Essbase is not

    I have had a few cases of recursion causing Essbase to crash, but the OPMN service still says it's running in the services monitor. Any clues why? Reason I ask is that we have taken the trouble to monitor (and be notified of failures) all Hyperion se

  • Timers Multithread sous CVI

    Bonjour, J'ai plusieurs questions concernant mon programme avec LabWindows CVI 9.0 et 4 cartes NI PCI 6229, sous Windows XP et dual core Intel 3GHz. Je souhaite réaliser un programme qui réalise une boucle d’asservissement et également un contrôle et