How do you make the volume louder when you export music from garageband?

Hey everytime I export my music from garageband the volume seems to die down.. Is there a way to fix this? Thank you

There's two things that are being called "volume": one is the output level of your audio file. Go to GB's preferences and see if the auto-normalize function is checked - if yes, it will automatically adjust the master volume so the maximum level of your output file is 0 dB. If you uncheck it, you can crank up your volume more, but your audio might clip in some places.
The other thing is loudness – audio files with the same peak level have a very different perceivable loudness. That is a question of mastering, i.e. applying compressors and limiters to make the sound more "dense". But that's a whole different story.

Similar Messages

HT3529 How do you change the settings so when you search your iPad it doesn't show the iMessages?

How do you change the settings so when you search your iPad it doesn't show the iMessages?

You could adjust the mailnews.tcptimeout preference, as explained in the 2nd point in [http://kb.mozillazine.org/Can_not_send_large_attachments this article]. Also, make sure there's no security program scanning outgoing mail attachments.

How do you silence the opening chord when you turn on the iMac?

How do you silence the opening chord when you turn on the iMac?

Welcome to Apple Support Communities
I do not recommend you to disable the startup sound. It indicates hardware problems when your computer is not working correctly, so it is important to leave it turned on. What you can do is to reduce the volume in OS X.
Anyway, if you want to disable the startup sound, the easiest way is to turn off the volume in OS X.

How do I change the volume for a single midi instrument in GarageBand 10? Every time I move the volume, it moves back!

How do I change the volume for a single midi instrument in GarageBand 10? Every time I move the volume, it moves back!

Every time I move the volume, it moves back!
Check, if you have a volume automation set on the software instrument track.
If the track volume automation curve is enabled, the volume slider for the track will move with the automation curve.
Click the automation curves disclosure triangle in the track header and disable the volume automation.

How do I change the image title when it is uploaded from iphoto to iweb. At the moment the image title is /shapeimage_1.png and I would like to put in something more relevant than just shapeimage?

How do I change the image title when it is uploaded from iphoto to iweb. At the moment the image title is /shapeimage_2.png and I would like to put in something more relevant than just shapeimage_2?

When you drag images from iPhoto to iWeb, iWeb retains the original filename.
When you use a mask, iWeb creates a png file with the shapeimage name.
So do not use a mask and crop your images before dropping them on the iWeb canvas.
When you use an irregularly shaped mask, then png files are created. They have to be png because of the transparency of the shape.
You can use a 3rd party application to create the png images yourself, and give them a proper name.
Or use the published png files, rename them and drop them back onto the iWeb canvas, while first removing the previous images.

How can I control the image size when I export form iphoto, the choice is too limited, I need to send a photo under 3 MB but if I choose high quaulity it is only 1.1 and i need to keep the best quaulity I can. Thanks for help.

How can I control the image size when I export form iphoto, the choice is too limited, I need to send a photo under 3 MB but if I choose high quaulity it is only 1.1 and i need to keep the best quaulity I can. Thanks for help.

Any image can only be as large as the Original. With a program like Photoshop you can UpRes an image and get it to a bigger size, larger files size as well, but the actual quality of the image will be degraded, depending on the UpRes system and the original quality of the image.
iPhoto is not the program to be doing that in and I don't think it even has that option.
So I suspect the image you are trying to send isn't much bigger than what you are getting. You can also try Exporting it from iPhoto to yopur desktop and see what size you end up with. If it is still that 209KB +/- file size then that is the size of the original image.

How can i make the sound louder than it already is?

How can i make this laptop louder than it already is? Is the sound quality of this mode typically this low?

Hi,
Are you talking about a home theater which is connected to you laptop or the laptop istelf ? If the laptop itself then what is it ? To help us answer question quicker, please read this:
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to cell register the date/time when you put a value in another cell

Hello guys!
How do I get a cell (eg A2) tell the date and time when I put a value in another cell (eg A1) in Numbers?
For example, I want to register a cell to read my electricity meter.
I write in cell A1: 45809. When placing this value in A1, I want to appear (on A2) the date and time when I did that record automatically. Is it possible?
I hope you understood the question!
Thank you in advance to those who try to help.

There is not automatic time stamping of on entry of a time. One suggestion I've seen has a cell that has the current date and time. Everytime you cahnge any cell that cell will update. You can then copy that cell and paste the value into your date/time cell adjacent to the meter reading:
Create a new, plain table:
Now in cell A1 enter the formula "=now()" short hand for this is:
A1=now()
now resize the table so it is a table that is 1 cell by 1 cell by selecting any cell, then dragging the table size control in the bottom right corrner towards cell A1:
It should look like this when you have completed this task:
Now create another new, plain table and enter "Date" for cell A1, and "Meter Reading" for B1:
Now you can enter a meter reading (I entered "45671"). Now select the CELL that has current date and time from the first table at the very top, and copy:
Now select the cell in the date column where you want to put the current date and paste values by using the menu item "Edit > Paste Value":

How do I make the Volumes folder visible so it will back up using Time Machine?

Hi
How do I unhide the Volumes folder for backing up using Time Machine?

OK I have to say this even though you probably realize it, having anything but mount points in the Volumes folder, especially regular files that are critical to you is really a bad bad idea.
You should do everything in your power to correct this asap.
In the meantime as to Time Machine, your profile says you are running 10.6.8 is that correct? TM has changed some since then.
Basically if you are not excluding system files from the backup the Volumes folder should be in the backup. If the regular files are in there is an other issue.
You can check by opening a Terminal window cd to your TM backup drive then into the .backup folder. Pick a backup and see if the Volumes folder is there and if the files are in it.
But again having anythgin in there is going to be a problem.
good luck

How do I make the stage transparent when published?

Hi. I'm new to flash and want to work towards making 2D animations.
I want to take a simple published animation and put it into SONY VEGAS. However, I only want the character (I've created a symbol for it) and not the big white stage. My goal is to get the animated character on top of all my sony vegas layers, but the stage is blocking all the other layers. Is there some kind of setting that can make the stage transparent when publishing as a SWF?

hi
you need to add some markup to your html:
add <param name="wmode" value="transparent"> to your <object> tag and add wmode="transparent" to the <embed> tag
the feature isn't supported by all browsers and it may cause your swf to slow down a bit if there's a lot going on visually.

How can i make the volume controller on a pavillion dv4 work after a clean windows install?

Hello!
Recently I performed a clean windows 7 install from a windows install disk I previously owned, the problem is that this disk didn't intalled the drivers and programs specific for this computer. What I want to know is which driver or program I need to install to make the volume controller on my computer to work again? The problem is that the volume bar that previously appeared on the screen and the "bing" sound indicating the volume level doesn't appear or sound now.
All other things seem to work fine, this is the only problem so far.
Thanks!

Hi,
Try downloading and installing the latest HP OSD Utility on the following link.
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55152.exe
After the installation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How can I make the background inactive when I show a popup in Windows phone 8.1..?

I have created a popup in Windows phone 8.1. But the user can click buttons in the background. Can I disable this feature of popup...ie. I want the background to be unresponsive when popup is shown.
How to achieve this....?

There are a couple ways to do this:
If you set popup.IsLightDismissed = true, when the user taps the background, the background will be unresponsive when the user taps the background. HOWEVER, tapping the background will cause the popup to disappear immediately.
When you open your popup, you can set Window.Current.Content.IsHitTestVisible = false, that should make the background untappable. However, you'll need to set .IsHitTestVisible back to true once the popup is closed, otherwise your app will be unresponsive
until the user closes and restarts it. You can subscribe to the popup.Closed event to tell when the popup is closed.
Ryken Productions

How can I make the data persistent when using plist ?

I have a UITableView table1. And when I touch any cell in the table a new UIViewController appears and it have two UITextField's name and description. After entering the data in both the text fields I used the save button to save them. In save method I wrote the code for the data to be stored in plist.
-(void)save:(id)sender
indexOfDataArray = temp;
NSString *string1 = [[NSString alloc]init];
NSString *string2 = [[NSString alloc]init];
string1 = nameField.text;
string2 = descriptionField.text;
NSDictionary *myDict = [[NSDictionary alloc] initWithObjectsAndKeys:string2, string1, nil];
[myArray addObject:myDict];
NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES);
NSString *documentsDirectory = [paths objectAtIndex:0];
NSString *path = [documentsDirectory stringByAppendingPathComponent:@"VideoData.plist"];
[myArray writeToFile:path atomically:YES];
UIAlertView *alertMesage = [[UIAlertView alloc] initWithTitle: @"Save Alert" message:@"The data entered is saved" delegate:nil cancelButtonTitle:@"cancel" otherButtonTitles:nil] ;
[alertMesage show];
[alertMesage release];
[myArray retain];
But the problem is every time I restart my application the data in the plist is deleted. How can I retain the data in the plist name I specified ?

I think yes, I am specifying only one file name to store in the path. I understood my where I am wrong.
If I added data in plist for two items(item1 and item2). And again I need to add next two items(item3 and item4) . How can I make item3 and item 4 do not replace item1 and item2 ?
Thank You.

How can I make the links work when the site is published.

I am a new iWeb user and have built the website www.realmoroccotours.com and am having a few problems that I hope someone can help me with.
First - in Iweb everything works fine but when it is published the links in the top and bottom menu do not work. If I clic on the link before the page is fully loaded it odes work. My host gave me the following information but I have no idea what it means or how to fix it. I have rebuilt the whole site but still the same thing happens.
+> One of your javascript files that you have installed in the header of the main+
+> page is blocking the screen with transparent image preventing links from+
+> clicking. Please remove conflicting javascript and reload that page again.+
Secondly, the site loads very slowly - although not all the time. Any suggestions on how to make it faster loading would be appreciated.

All it means is that the image is blocking the navigation menu/overlapping - all you need to do is move it out of the way and the menu should work. Do a view all in iWeb and you can then see what is overlapping and what you need to move.
You could also build your own nav menu if you like so that your site will be found more easily - javascript, which the iWeb menu is, is not always found that easily. You don't need to re-build the whole site - just the nav menu.
If you want to speed up your site, then you could try using Web Crusher or iWeb Maestro to speed it up - you need to do this post publishing though, so publish to a local folder and then run it through either of these to get rid of the bloated code that iWeb creates and then upload your site.

How can I make the volume buttons on my iPod Touch control ALL sounds - not just alerts and system sounds?

I would like to TOTALLY silence my iPod. I turn the volume all the way down using the buttons on the side, but this just silences alerts and system sound effects. Then I start a game, and the game sounds still play. Of course I can turn the volume down after the game starts, but by then I'm already busted :-)
I don't know if it's related, but...
I can plug in my headphones and then turn the game volume all the way down. But when I remove the headphones, the volume goes back up again.

First
Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions
Then edit your account to add a valid email address
How do I change my Apple ID Name or personal information?
You can change your Apple ID Name at My Apple ID. Click on Manage your Apple ID and sign in with your Apple ID name and password. Click Edit and enter the new information, then click Save Changes. Changes take effect immediately. You can also use My Apple ID to change your personal information, such as your mailing address or email address. See Changing the name you use for your Apple ID if you'd like more information.

How do you make the volume louder when you export music from garageband?

Similar Messages

Maybe you are looking for