How do you manually edit stereo pan keyframe values?

I would like to manually edit stereo pan keyframe values instead of dragging them with the mouse. Is there a way to do this?

SuiteSpot wrote:
Pretty sure this has been mentioned before but with this new look forum there is a good chance it won't be missed now
Hehe! Very good... and yes it has, on more than one occasion.
On the subject of keyframes, there's at least one other modification that some might find useful - and that would be a means to control the 'aggressiveness' of the spline created without having to move a load of points. iZotope do it with a slider in RX in their NR and there, it's quite useful sometimes. Personally none of this bothers me too much, because I very rarely use the automation at all these days - it screws with the background noise on live recordings!

Similar Messages

I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone?

I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone? (the check marks are not bolded, does this mean they are not in my library but only on my phone?)

You uncheck the music in your iTunes library on your computer and along with sync only checked songs and videos selected under the Summary selection for your iPhone sync preferences with iTunes, only checked songs in your iTunes library will be transferred to your iPhone or remain on your iPhone and the unchecked songs in your iTunes library that are currently on your iPhone will be removed when syncing.
Or make use of iTunes playlists and choose selected playlists, albums, artists under the Music selection for your iPhone sync preferences with iTunes and select the playlists below that you want transferred to your iPhone.

How do you save a stereo file of your 8- track mix, to obtain more tracks. ( jayco62)

How do you save a stereo file of your GarageBand mix, to increase the # of tracks you can record?

In the Bounce Window, choose "Split" instead of "interleaved" from the File Type menu to bounce your mix as separate mono files
Regarding the gain correction, use Automation
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

How do you manually manage podcasts with the new iTunes?

Like the subject line says: How do you manually manage podcasts with the new iTunes?
With the previous version of iTunes, when I plugged in my iPod, I could select the iPod, select podcasts, and manually delete episodes. With the new iTunes, I can't select individual episodes when looking at my iPod through iTunes. Is my only option to Sync? If so, why is that my only option?
This question probably has a simple answer, and I'm just not seeing it.

Rock,
I think I figured out a way to do what you want to do - which is the same way that I use Itunes with my Ipod. (My Itunes libary was destroyed last year so I can no longer auto synch my Ipod as I would lose thousands of songs).
Funnily enough, I discovered this new way of manually moving podcasts while trying to figure out what cpragman was trying to say (I never could - he must be smarter than me, as I couldn't get his method to work).
1. Open up your Itunes in your regular Library view. Choose Pocasts from the left hand side (either in the sidebar if you have that enabled, or from the little "radio" icon if you don't.)
2. Mouse to the podcast you want to place on your Ipod.
3. Right-click it. A long menu will pop up.
4. Move to the "Add to Playlist" option. As you hover, all your playlists will be visible. But at the very top will be the name of your Ipod itself (whatever you named it originally). Choose THAT name, and voila! That podcast will now copy to your Ipod and be easily available when you disconnect.
A nice feature of this method is that you can shift-click several podcasts at once and do the same thing, and all your selected podcasts will copy over (if you're like me and update your Ipod only every few weeks).
Hope this helps - let me know if it works for you!

How do you manually lower the resolution on a hp photosmart 209a-m printer

I want to print with black ink only and lower the resolution. How can you manually lower the resolution settings? Black ink only is no issue but I cannot lower the resolution to below the 600 that it's set for. Wasting ink! Planning on getting a non- hp printer due to ink costs.

Hi,
From applications, using DRAFT printing or FAST printing will definitely reduce the resolution.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

In iPhoto, how do you manually move the order of a photo within an album?

In iPhoto, how do you manually move the order of a photo within an album?

Within an Album? Drag and drop.
You can't do this in an Event.
Regards
TD

How do i reverse the stereo pan in Final Cut Pro X

how do i reverse the stereo pan in Final Cut Pro X

For anyone that wants to know: Final Cut Pro X: Configure audio channels

How do you manually sort photos in Photo Stream?

How do you manually sort photos in Photo Stream?

This worked for me.
I created a new photo stream for the pics I intended to share. For this project is was pictures of my parents new apartement. I needed them to be in a certain order, not in the order I took the pictures. I shared this photostream with my parents Apple ID.
Created a photo album of the images I wanted to share in a specific order in iPhotos on my Mac.
Put the pictures in the new desired order in the photo album.
Selected all the pics in the album and did a batch change of the date. I put them in 1 minute incriments.
Then selected all the images in that album and shared to the to the desired photo stream.
Seems to have worked like a charm.

How can you create a swish pan in Final Cut X?

How can you create a swish pan in Final Cut X?

Andy's - http://andymees.wordpress.com/swish-transitions/
How's that for service?
Cheers!

How do you make editable entries in an Interactive Report?

I have seen a feature in other Apex applications that I can't reproduce. There is an interactive report in which each row has an Edit icon (pen and pad) and clicking on it leads to a form page which displays the info, so you can edit it.
I haven't been able to build an IR that will show this icon. How can I do this?
Steve "the n00b" in Raleigh NC

Steve,
This link should show you the way.. Edit Link on Interactive Report
Also, could you change your profile name to smeothing more human? We know you are steve, maybe you could change it to the signature you use on your messages?
Thank you,
Tony Miller
Webster, TX

How do you manually assign an IP address?

I am adding a fifth computer to my LAN -- an Apple laptop. For some reason the router is not automatically assigning it an IP address.
How do you figure out what address to automatically assign?
(all the other computers have the same number but a different extension as the last number, following the last period).
This is an iBook Apple laptop. Is there a special secret to getting Apples to "talk" to Linksys wireless routers (or vice versa)? My router is a WRT54G.

is your router wrt54g v5, if it is, you should upgrade its firmware to 1.01.1 to resolve the problem. If not, try going to system preferences >> network >> tcp/ip. On ipv4, select manually and enter the following: ip address: 192.168.1.50, subnet mask: 255.255.255.0, router:192.168.1.1 and dns server: 192.168.1.1. hope this helps

How do you batch edit still photos with panning/zooming effect in FCP X?

Hi,
I was making a slideshow with a lot of photos. I had to manually add two keyframes in each photo (one in the beginning and one at the end), and then manually adjusted the scale/position for each photo so they pan/zoom during the slideshow.
Is it possible to accomplish the samething with multiple photos in a batch? It would sure save a lot of time. Thanks.
Regards,
Nelson

Build the effect that you want on one photo.
Right click that photo on the Timeline and choose Copy.
Select the other photos that you want to have the same effect.
Right click one of them and choose Paste Attributes.
In the Attributes dialog, place a check mark next to those you want. In the case of the effect described in your post, that would be Motion Attributes. If you had also included Filter effects such as color correction, you would check those too.

HT1535 How do you manually add music to a device's playlist in iTunes 11??? YOU CAN'T!!!

I don't know what Apple was thinking with iTunes 11, this is the worst iTunes EVER. Year after year, Apple continues to ruin what used to be a great app.
In iTunes 11, your devices no longer appear on the left along side your playlists. There's now a spot in the top right corner that says the number of devices. If you click on that button you can see the devices that are connected, the ammount of free space and an eject icon but that's it. If you click on the device, you can set it up but I cannot seem to find a way to simply drag and drop a song from my music library to my iPod or more importantly to a specific playlist on my iPod. A very common thing... HOW DO I DRAG AND DROP SONGS INTO AN IPOD PLAYLIST IN ITUNES 11???
If there is no answer, how do I downgrade my iTunes to 10 or 9???

It's is Sooooooooo RETARTED!!! WHY CAN'T I MANUALLY ADD PLAYLISTS TO MY IPHONE??? AFTER I PURCHASE MUSIC IN ITUNES I THEN USUALLY CREATE A PLAYLIST (In Itunes 10.7) BECAUSE I FORGET THE ARTISTS!! AFTER I CREATE MY PLAYLIST I WOULD MANUALLY DRAG THAT PLAYLIST TO MY EXISTING IPHONE ICON AND VOILA! NOW I CAN'T EVEN DO THAT!! I HAVE TO WRITE DOWN THE ARTSISTS NAMES AND ENTER THEM INTO THE SEARCH BAR AND ADD THE SONGS MANUALLY TO MY IPHONE ICON!!!! ITUNES 11 JUST PUTS ME IN A REALLY BAD MOOD! I'm soo mad and upset. First world problems yo...

How do you permanently disable Tool Pane from showing up every time you open a pdf document in Adobe Reader DC 2015?

Just like 9.9/10 people out here in the real world, I use Adobe Reader to read pdf files and never (ever) use the Tool Pane for anything.
How do I permanently disable it from showing up, instead of having to close it *each & every time* I open a pdf document? The majority of people don't want thins thing covering up the page they are trying to read.

Okay, seems I've stumbled upon an ugly workaround but it works for me. I'm using Windows 8.1. Go to the install directory, i.e." C:\Program Files (x86)\Adobe\Acrobat Reader DC\Reader\AcroApp\ENU". Create a new subfolder (I used "Disabled"). Move 3 files from the "ENU" folder into the new "Disabled" folder: AppCenter_R.aapp & Home.aapp & Viewer.aapp. Open a PDF and no more Tool Pane! I originally moved just the "Viewer" file but if you clicked on "Home" or "Tools" on the toolbar you couldn't go back to the "Document." Moving all 3 files takes care of that issue. Like a lot of people I don't and won't ever use any of the tools. I just want a reader. Let me know if this works for you.

C310a How Do You Manually Set an IP Address?

Hey all.
Just got a new HP Photosmart Premium C310a and I'm trying to set it up on my home network (Verizon FIOS, Apple nodes, Alesus Access Points, hard set IP's). Alas, it only comes with WiFi.
So, I've done the following:
* Added the printers MAC address to the Access Point I'm going to connect to.
* Installed all the various Macintosh drivers/software.
* Run the WiFi set up.
At this point, according to the HP Netowrk Configuration Page, i'm all happy and connected, but according to everything else, I'm not connected. Since I do NOT run DHCP, I'm guessing that the printers 'auto' configuration is looking for IP info. So, I go to the printers front panel and navigate to Tools - Network - IP Settings. Alas, no matter what I do, it always stays on Automatic and doesn't take the IP info I enter.
How the heck to I turn off Auto IP Settings and Manually enter my IP info??
Any help would be appreciated!
thanks in advance
cp root
This question was solved.
View Solution.

You may have to enable DHCP temporarily to get the printer on the network. Then:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address). If you do not know this, enter the current IP address.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Leave the gateway and DNS blank. Click 'Apply'
Now, shut down the router and printer, start the router, wait, then start the printer.
Now you can disable DHCP and be on your way!
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do you manually edit stereo pan keyframe values?

Similar Messages

Maybe you are looking for