How do you map a custom event trigger to a DHCP ?
In the Auto Smarports Config Guide, Cisco IOS Rel 15.0(1)SE, July 2011, it states Auto Smartports can detect devices based on DHCP options. There are predefined macros for devices detected through DHCP. I have a few questions: 1) What are these predefined macros? and 2) can I specify a user-defined event trigger from DHCP options? How do I do this?
Hi Flowserve1,
What hardware are you using to make your measurement? What driver are you working with? You will be able to make measurements with your counter on a digital signal. If you look at the device pinouts for your device in Measurement and Automation Explorer you will see the counter terminals.
Steve B
Similar Messages
-
I'm using LabView 6.1 on Win XP Pro. I'm trying to highlight points on a graph picked (by using a mouse click) by a user. The mouse click event returns x,y in pixels relative to the upper left corner. I know the upper left corner of my control. I also know the width and height of the plotting area within the control, but I don't know the position of the plotting area within the control. Without that piece of info, I can't do the mapping.
Hi,
You May Want to do this a bit Differently but achieve the same Goal i.e. the user Picks Points on a Graph and you highlight these points and Draw A graph or impart some other functionality.
Here is an idea -
1. Let the User Position the Cursor on the Point they want. To aid the user you can make the cursor legend visible which shows the X and Y Axis values for the cursor. To accuartely Position the User can use the the 4 Buttons that are a part of the Cursor Legend.
2. Put a Button next to the graph saying "Select this Point"
3. After Positioning the Cursor when the user Clicks this Button you use the "Cursor Position" Property of the graph to extract the value of the cursor.
4. Next you may want to add this Point to Cluster Array which displays
the Points on the Graph. If this Array is Empty and you add this one Element to the Graph then this Point will be Visible. The User may now reposition to another Point and Repeat the Process.
5. To aid the user you may want to Provide " Delete last Point" and "Clear All" Buttons. The Functionality is to Delete Last Element in array or Clear all Elements in the Array.
The Structure of this whole routine probably is Event Structure(to trap Button Clicks "Select", "Delete" etc) Inside a Case Structure (State Machine to Perform the Operations User Clicked) All Inside a While Loop.
This is a Short Description of how this Functionality can be Built. To Automatically Extract Cursor position from the Graph and then try to Map it to Coordiante Axis For a Point is More Involved and a Little Convoluted.
Why not keep it simple? IF anything is unclear, I will be glad to explain or post an example (Only if time permits!!)
Good Luck
Mache
Good Luck!
Mache -
How do you produce both Customs Export & Import documentation in an STO?
Hello All -
How do you produce both Customs Export & Import documentation in an STO scenario? For instance, if a company would like to create a STO in SAP to move materials from one plant to another and would like to produce both the Export & Import paperwork in GTS, what documents would be needed in R/3 to make this possible?
Would the following be needed, or is there some other way?
- STO
- Outbound Delivery & F8 Invoice to generate the Customs Shipment in GTS for the Export documentation
- Inbound Delivery to generate the Customs Declaration in GTS for the Import documentationThanks Sameer -
Yes, for the Import documentation, I think we will be declaring prior to Goods Receipt, so we will first use the Inbound delivery, and then the GR document later on once the materials have been received. (I believe you and I were talking about some of this in another thread actually.) Thank you for confirming this.
As for the Note, I have also seen this - but thought that this was to more or less give visibility to the sending plant up-front at STO of what export licenses might be needed. (According to the note, currently they would only be able to check if licenses were needed at the outbound delivery, and not on the PO)
Per the note: "Given a Stock Transport Purchase Order scenario: Plant A in Germany issues a STO PO against vendor plant US10 in the US. GTS looks at the PO in terms of importing from the US (departure country) coming into Plant A in Germany and performs compliance checks. Meanwhile, exporting plant US10 only has visibility at outbound delivery creation to see if am Export License is needed. Exporting plant US10 may want to know if they need a license to the country of destination, in this case Germany, at STO PO creation."
However with the proper country-level export/import activation of the legal regulations, I believe that you can still have the STO check export-related licenses even though it is mapped to GTS as IMPORD. I have done some testing on this and it appears to work (you just need to ensure that you are activating the relevant countries for export/import properly in the legal regulation, and you can have both export & import documents check the same legal regulation and deliver the correct license determination). I was just wondering if you had any experience with this that was contrary to what I have found, or if there is something you think I am missing..
Thanks -
how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon
To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.
-
How do you add an application event to the Applications Panel
How do you add an application event to the Applications Panel.
My previous post referred to .ashx files, and the problem seems that Firefox, by default, does not recognize a .ashx format being read by Adobe Acrobat.
Therefore there needs to be a way to add Applications and Events into the Applications Panel under Preferencesdomdp wrote:
...I have Theme L selected and I get 10 icons along the left side and bottom....
...I am thinking I may be limited to 10 icons....
Gotcha... But actually its limited to 9 icons in the L theme as the Profiles icon is always present. From that screen hit the Menu key to display the bigger list of icons. Arange them so the first 9 icons are the ones you want to see on the L theme. -
How do you add a custom label to dates in contacts.....
How do you add a custom label to dates in contacts- I have multiple birthdays in contact group and want to change label through customise to add additional birthday- unless another way to add second birthday to contacts and identify each one?????? or way to link contacts with same address phone number etc but id birthdays?????
You have some contacts with more than one birthday?
To add a custom label for a date, select Edit for an existing contact. Select Add Field. Select Date. Scroll up with the Info window above the date selection and select Other for the new date selection. Select Add Custom Label and then select this label for the new date field for the contact.
As far as linking dates with multiple contacts, the answer is no to that. -
Apple_ID_card_declined_for_this_country
How can you expect the customer to have a LOCAL/COUNTRY Based Credit Card every where we go???
Last week I was on holiday in HK,
and
from my Hotel I was able to use m VN Credit Card with my Apple ID and purchase online!
Why THIS WEEK, can't I use my HSBC Platinum Credit Card from Vietnam,
for my Singapore Apple ID account ,
while working here in Vietnam???Unfortunately, this is a problem that is driven by the DRM Dictatorship. Despite the proliferation of mobile devices and the fact that there are many of us who do a lot of international travel, content providers don't want you to have access to their products outside of your homeland. The Balkanized mentality of the DRM Dictatorship is way out of touch with the modern world.
At least Apple, to its credit, allows you to use your accounts outside of your homeland as long as you have the proper credentials for them. Most other services use the more Draconian geolocation filtering which does require you to be physically present in your homeland. For the most part, you are not allowed to leave home if you want access to your favorite entertainment! -
How could you map the Records of OM- PA
Hello Experts,
How could you map the Records of OM->PA ,if the designation of person changes from manager to supervisor from certain date.and how can we see the changed records??
Solution :we can see the changes in the addition action infotype 302,personel hiring action(0000) delimit the record whenerver we changes the designation,and in the orgassingment infotype overview ,action infotype over view we can see the changes and PLOGI-ORGA IS the integration switch and position is the key for map the recoed from OM ->PA
Post your comments if the solution is correct???
Regards
ChandraThanks a Lot!!!!
Regards
Chandra -
Simple question - How do you make an onchange event occur in a select list
Simple question - How do you make an onchange event occur in a select list to fire a process?
Thanks1) Using ApEx Selec list on Submit Item.
You will create a PL/SQL Process after Submit. -> Conditional Type Request = Expression1. -> Expression1 is the name of your Select List. Process Source - > Procedure you like. For example depending of your select List value you will add rows in different tables.
2) Javascript This example will change a System parameter value when changed
<select id="P3_SUBSYSTEM" onchange="location.href='f?p=101:3:2164422329953284::NO::P3_SUBSYSTEM:'+this.options[selectedIndex].value;" size="1" name="p_t21"> -
How do you map networks on an iMac
How do you map network connectios on an iMac Intel based unit?
in finder my nas and other computers how up under shares then I add shortcuts to the dirs I want access to
and place them where I want them == they are map'd -
How do you remove duplicate note events 1 or to ticks apart ?
How do you remove duplicate note events 1 or to ticks apart ?
my keyboard was putting out doubled note events durring a session.
But the note events are between 1 and 3 cliks apart.
in other words 1 might be at 1 3 151 and the other duplicate at 1 3 153
So remove duplicate events does not work.
I dont want to have to quatize all events either.
thanks
CC
Logic XThe only other option I can think of that may help you is the select highest/lowest notes.
This will select the top or bottom notes for any notes that are overlapping.
the key command is :
**** up ( highest ) or shift down ( lowest )
It may work on some blocks of notes, but it's a bit hit and miss.
Other than that it's a manual editing job I'm afraid -
How to create schedule job and event trigger in XI to start a ABAP program?
Dear All:
Here are what i need to do:
1.To run a ABAP program to start an XI scenario per hour.
2.To run a ABAP program to start an XI scenario per day at 6 PM.
3.To run a ABAP program used event trigger to make sure that XI scenario has finished the process and after that wait for 10 min later and run again.
only i know is used sm36 & sm37 to set up a schedule job.
but what i don't know is how to do it step by step.
especially point 3.
are there any step by step example can show me how?
it better be simple and details...
thanks you all
Regards
Jack LeeHi,
If you want to trigger the event manually from within SAP, use transaction
SM64
in SAP this is done by scheduling a job
once a new customer is entered
your scheduled report sends customer master data
you can schedule your report (TCODE - BD12 I think) to one day or every 5 minutes... it depend on your needs and the system performence
Regards,
Surya -
How do you carry out an event if a job finishes with a return code 4?
Hi
A job which would complete successfully in SAP via the SM36 scheduler completes with an 'Error' in Redwood CPS because there are errors within the spool and it ends with a return code 4.
We don't want this to error in Redwood CPS, so we have set the return code mapping to Completed with entries of 0 and 4.
I.e. whether or not there is an error in the spool, the job will complete successfully in Redwood CPS.
However, we want to be alerted if there are errors in the spool.
How do we do this? The manual says "A job can raise one or more events when the job gets a specific job status or return code" - where is this set? I can see on the 'Event' tab of a job definition you can raise an Event when the job enters a specific status, but I only want to raise an event (or carry out a step / send an email etc) if I get a return code 4 (none of the job statuses are relevant) - how can I do this?
Thanks
RossHi Anton
Thanks for that. However, it's a bit more complicated...
I have a job chain with 2 steps. Any one of the two steps can have an error in the spool which by default in Redwood CPS result in the job ending in status Error. I don't want this, as the second step should still run if the first step ran okay with with errors in the spool (but shouldn't run at all if the 1st step fails completely). I.e. setting 'on Error goto step 2' or having no dependancy at all is not what we want.
Therefore, I set the return code mapping on Completed to return codes 0 and 4. I.e. if step 1 has an error in the spool (return code 4) it still ends as 'Completed' and step 2 runs.
Our problem is that we want to be alerted if there is a return code 4 (error in the spool). I tried as you suggested by entering on the 'Raise Event' tab of the job chain to raise an event on status 'Error' with a return code of 4. But no event was raised. I think this is because the return code mapping is setting the status to 'Completed' (on return code 0 or 4) BEFORE the software checks the status; i.e. the status is actually 'Completed' (rc=4) and not 'Error' (rc=4) so an event is not raised.
Ideally I want to set the Event to be raised on status 'Completed' with a return code 4 - but when I select 'Completed' the 'Error Code' box is greyed out.
I.e. can't set this - I can only set on a generic 'Completed' and I don't want to raise a message if the status is Completed but the return code is 0....
Any ideas??
Ross -
How can I map the shutdown event?
Hi,
I need to map the shutdown event (when the app is finished due to turn off or restart the machine).
My code ...
ShutdownHook shutdownHook = new ShutdownHook(this);
Runtime.getRuntime().addShutdownHook(shutdownHook);
... works well !!
But if I use the Java Web Start to deploy, the shutdown event is not trigged.
Any idea to solve this problem?
Thanks,
RufinoThe top 5 events have the flowing event in my db,how can i eliminate it?1) once you have eliminated the top event;
2)you'll have a new top event that needs to be eliminated
3) go to #1
How do you know when to stop the infinite loop?
Handle: user7244870
Status Level: Newbie (5)
Registered: Sep 28, 2010
Total Posts: 85
Total Questions: 31 (18 unresolved)
so many questions & so few answers.
Edited by: sb92075 on May 15, 2011 5:52 PM -
Custom Event Trigger from MDM Item Detail Iview
Hello,
We are using EP 7.0 EHP 1, MDM 7.1 SP04.
EP & MDM trusted connection is activated.
We want to trigger UWL iview once record is saved from MDM Item Detail
Iview.
Following steps are performed but still no results were observed.
--> Open Item Detail Iview
--> Click on Custom Details
Enter Following Details:
Custom Event Name: UWL
Event Type: EPCF POST SAVE EVENT
Target (URL or Event Name): http:/<portalURL>:<port>/UWL/
Namespace: urn:com.sap.netweaver.bc.uwl.ui.UWL
Parameter Format: Standard
Quick Link name to uwl iview is stored in project folder is given as
"UWL" and hence target url is http:/<portalURL>:<port>/UWL/
Could you pl guide us on what settings are missed??
Supporting Link used:
http://help.sap.com/saphelp_mdm550/helpdata/en/45/c89e544c52570be10000000
a114a6b/frameset.htm
Regards,
PuravPlease check out below link. It might be of some use.
[http://help.sap.com/saphelp_mdm550/helpdata/en/45/c87d0243e56f75e10000000a1553f6/frameset.htm]
(Go to Configuring Data Exchange)
Regards,
Abhijeet
Maybe you are looking for
-
Photoshop says I'm not signed in to Creative Cloud, but I am.
Keep trying to sync Photoshop settings and get the message that Photoshop can't access Creative Cloud. In Photoshop Preferences, under "Sync Settings" it says "not signed in" but in the help menu it says I am signed in and gives me to option to sign
-
When I try to activate my prepaid CC card I get: "This card was purchased in a country that does not match your Adobe ID." I bought it in the USA for use here in the UK...how can I activate it? It is a student edition. Thanks
-
IT Depreciation area '15' values are not coming
Hi, We have configured the AA component and the transactions are working fine includes Acquisitions, Depreciation etc. we have created the group assets to take the IT Gross block and enabled the '15' Depreciation area for them and created the derived
-
I have a GUI which aims to save client's details (Name, Address and Phone No) for an estate agency. There are two types of client: Buyers and Sellers and am trying to get the clients details saved into the appropriate class depending on which client
-
I can't permanently close documents in Preview.
Hi! I'm having some troubles with Preview on Mac OSX Lion. I usually open a lot of PDFs and Pictures and naturally opened with Preview... But with the addition of Resume the pictures do show up again BUT its not that you just close the document and i