How do you map accountId?

Hi there,
I am having problems mapping fields in my resource to IDM. I have a csv file and I want a custom email field to be used as the accountId. I have indicated this mapping in the wizard screen setting up the resource. However when I try to extract from resource to create IDM accounts it gives an error saying there is no accountId. I was under the impression that this is what you could use the mapping screen for. Its ok if I add a field in the CSV titled accountId, but sureley this is defeating the object when it comes to this functionality of mapping.
Can someone advise where I might be going wrong?

Hi there, I have done as you advised and just mapped the accountId with my email field in my CSV, but still an error. I am using the flatfile active sync adaptor to load my CSV. Its similar to the load from file option in the accounts view, but it allows you to set it up as a resource, so you can run an active sync or reconsiliation schedule on it. I have tried the load from file and same error. It seems to still be expecting to find a field called accountId.

Similar Messages

How could you map the Records of OM- PA

Hello Experts,
How could you map the Records of OM->PA ,if the designation of person changes from manager to supervisor from certain date.and how can we see the changed records??
Solution :we can see the changes in the addition action infotype 302,personel hiring action(0000) delimit the record whenerver we changes the designation,and in the orgassingment infotype overview ,action infotype over view we can see the changes and PLOGI-ORGA IS the integration switch and position is the key for map the recoed from OM ->PA
Post your comments if the solution is correct???
Regards
Chandra

Thanks a Lot!!!!
Regards
Chandra

How do you map networks on an iMac

How do you map network connectios on an iMac Intel based unit?

in finder my nas and other computers how up under shares then I add shortcuts to the dirs I want access to
and place them where I want them == they are map'd

How do you map a PFI to a clock to measure frequency?

I am running LabVIEW 8.2 and I am trying to measure the frequency of a voltage on a PFI pin. I have heard that I can map that pin to a counter input to measure the voltage but i cannot figure out how to do it. Are there any VI's already set up to do this? How can I map the PFI to a counter?

Hi Flowserve1,
What hardware are you using to make your measurement? What driver are you working with? You will be able to make measurements with your counter on a digital signal. If you look at the device pinouts for your device in Measurement and Automation Explorer you will see the counter terminals.
Steve B

How do you map a mouse events coordinates to the coordinates of a chart or graph?

I'm using LabView 6.1 on Win XP Pro. I'm trying to highlight points on a graph picked (by using a mouse click) by a user. The mouse click event returns x,y in pixels relative to the upper left corner. I know the upper left corner of my control. I also know the width and height of the plotting area within the control, but I don't know the position of the plotting area within the control. Without that piece of info, I can't do the mapping.

Hi,
You May Want to do this a bit Differently but achieve the same Goal i.e. the user Picks Points on a Graph and you highlight these points and Draw A graph or impart some other functionality.
Here is an idea -
1. Let the User Position the Cursor on the Point they want. To aid the user you can make the cursor legend visible which shows the X and Y Axis values for the cursor. To accuartely Position the User can use the the 4 Buttons that are a part of the Cursor Legend.
2. Put a Button next to the graph saying "Select this Point"
3. After Positioning the Cursor when the user Clicks this Button you use the "Cursor Position" Property of the graph to extract the value of the cursor.
4. Next you may want to add this Point to Cluster Array which displays
the Points on the Graph. If this Array is Empty and you add this one Element to the Graph then this Point will be Visible. The User may now reposition to another Point and Repeat the Process.
5. To aid the user you may want to Provide " Delete last Point" and "Clear All" Buttons. The Functionality is to Delete Last Element in array or Clear all Elements in the Array.
The Structure of this whole routine probably is Event Structure(to trap Button Clicks "Select", "Delete" etc) Inside a Case Structure (State Machine to Perform the Operations User Clicked) All Inside a While Loop.
This is a Short Description of how this Functionality can be Built. To Automatically Extract Cursor position from the Graph and then try to Map it to Coordiante Axis For a Point is More Involved and a Little Convoluted.
Why not keep it simple? IF anything is unclear, I will be glad to explain or post an example (Only if time permits!!)
Good Luck
Mache
Good Luck!
Mache

How do you map a custom event trigger to a DHCP ?

In the Auto Smarports Config Guide, Cisco IOS Rel 15.0(1)SE, July 2011, it states Auto Smartports can detect devices based on DHCP options. There are predefined macros for devices detected through DHCP. I have a few questions: 1) What are these predefined macros? and 2) can I specify a user-defined event trigger from DHCP options? How do I do this?

Hi Flowserve1,
What hardware are you using to make your measurement? What driver are you working with? You will be able to make measurements with your counter on a digital signal. If you look at the device pinouts for your device in Measurement and Automation Explorer you will see the counter terminals.
Steve B

How do you add a waypoint to your itinerary in maps?

How do you add a waypoint to your itinerary in maps?

How do you add a waypoint to your itinerary in maps?

How do you create new maps in Mail on iPad?

How do you create new maps in Mail on iPad?
In the iPad-manual they mention you can put messages in other mailboxes or maps (to free up the Inbox).
But they don't mention how to create such maps.
In the app itself I can't find a way to do it.
thanks for all replies
Kamiel

Maybe you are confused by the fact I used the word 'maps' instead of 'folders' (my natural Ianguage is Dutch).
For your question about the manual: on page 59 in the 'iPad 2 user guide' under 'organizing Email' they say you can move messages to a different mailbox or folder.

How do you change the distance units in the new Maps application on Mavericks from KM to miles?

How do you change the distance units in the new Maps application on Mavericks from KM to miles?

The scale in Maps follows your regional settings in System Preferences > Language & Region > Region.
Selecting United States, for example, will use English units (feet and statute miles).
There may be other methods I'm unaware of.

How do you unpin a drop pin in maps?

How do you unpin a drop pin in maps?

Tap on the pin, then tap on the blue i in the banner. One of the options in there is "Remove Pin".

HT204407 How do you add pictures of friends in the map on Find My Friends app?

How do you add pictures of friends in the map on Find My Friends app?

Nope. I have pictures in contacts but no picture in the app. What else must I do?

Score Question: how do you shift a beat post mapping?

Suppose you have already beat mapped a piece of audio (playing in midi track and 'analysing' as per the Beat Map feature) and logic's metronome now corresponds to your map ( with all the little funny weird tempo changes and fractions in the tempo window)..
Problem: there is a subtle ralentando you missed when playing in the tempo map - this now makes a phrase late .. ie a few notes play later in the score than where your ear tells you they are relative to the audio. But the rest of the score is fine.
Question: is it possible to correct the tempo map by shifting a few beats forward or back in the Tempo List without ruining all the other bars? Or is there some other way of making the correction? ( I will try this and report back ... but in the mean time I wondered if any of the Discussion Forum experts had other suggestions).
Adam

Experimenting so far.. you can shift the beats around within a bar by fiddling with the minutest fractions of the SMPTE values in the Tempo Editor but this gobbles parts of the territory of the other beats within the bar eg
The bar looks like this to begin:
!! 1 + 2 + 3 + 4 + !! [ where !! represents a bar line]
Shifting the SMPTE you can do this:
!! 1+ 23 4+ !!
But what is needed is this:
!! 1 + 2 + 3 + 4 + !!
ie how can you expand one bar GLOBALLY pushing all the bars that follow it along without messing up all the relative values?
Although by now I could have re-mapped the whole song, I just wonder if there is in the interest of human scientific progress a solution for future quick adjustment.
... actually just thought of something on the hoof: if I had not deleted the original midi template ( which I have), I could have gone back, expanded the ralentando bar as above, and shifted all the beats that followed in the Moatrix (.. err' I mean Matrix iS' book is getting to me

How do you load google maps as they are not preloaded

how do you load google maps as they are not preloaded and it would take long time by moving around on the maps

You can't. The built in Maps app does not store data locally on your phone. It requires a data connection to display location info.

Maps.app how do you find restaurants around dropped pin

How do you go about getting ios7 maps.app to find restaurants, gas stations, etc around a pin you've dropped? Seems like it should be straight forward but Im having no luck.
Thanks in advance.

I wish there was this feature but you can request it https://www.apple.com/feedback/iphone.html
You can try Yelp app to look for restaurants etc.

How do you add a business to Apple Maps outside the US?

I'm interested in adding businesses in my city because it's lacking a lot compared to google maps. I don't live in the US.
How do you do it?

I think adding and correcting Maps is done through the "Report a Problem" functionality irrespective of where you are - you can access this using Maps on your iPhone or your Mac, for instance. This article has quite a lot more information about what is happening and how to report corrections and updates:
http://appleinsider.com/articles/14/06/30/apple-updating-its-maps-with-user-corr ections-every-day-at-3-am-eastern

How do you map accountId?

Similar Messages

Maybe you are looking for