How do you master reset a 4 s, How do you master reset a 4 s

How dou master reset a 4 gs

Hold down the sleep and home buttons, ignore the red Off slider, wait for the Apple logo, let the buttons go.

Similar Messages

  • When using the measure tool the imputed scale resets to 1to1 as soon as you perform another action. How do you get the scale to lock?

    When using the measure tool the imputed scale resets to 1to1 as soon as you perform another action. How do you get the scale to lock?

    Hi there - I think I am having problems associated withg Cause 9 in that in google mail I have another pop email address associated so that I can send using this email address, but then I have both addresses setup seperately in BIS. When I receive a mail from GMAIL I receive a duplicate with "received by: unknown" in the header. I had gmail setup so that it would send using by pop email address as default.
    In your answer the settings for the two filters you recommend creating are broken links and I canot actually see them. What are they?
    Also What do you recommend setup wise with gmail and a pop account. Some people say it is better to get gmail to receive the pop mail account and run the whole account from there. Blackberry doesn't seem to like this setup very much. Should I completely dissociate the pop account and to try and clarify the distinction between the two? Or should I setup a second gmail account and have that poll my pop account and then have the blackberry feed off these two gmail accounts? The reason I am considering this option is gmail provides a lot of storage and online continuity and this would effectively persist my account.
    Your help would be much appreciated.. I have had blackberry woes now for over a month and I have spent hours with various support personel, tried deleteing and sending down new service books etc etc but had no luck yet.
    thanks,
    Nathan 

  • If you forget your cover lock passcode, how do you reset it?

    If you forget your cover lock passcode, how do you reset it?

    If you've forgotten the passcode to unlock the iPad then you will need to connect it to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode in order to be able to reset it : http://support.apple.com/kb/ht1808
    If you do it via a different computer then :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • HT201303 Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them?  Apparently its to much for the support team. Can't get an answer out of them...

    Do any of you apple geniuses out there know how to retrieve the answers to your security questions or at least reset them?  Apparently its to much for the support team. Can't get an answer out of them...

    Reset Security Questions
    Frequently asked questions about Apple ID
    Manage My Apple ID
    Or you can email iTunes Support at iTunes Store Support.
    If all else fails:
    Go to: Apple Express Lane;
    Under Product Categories choose iTunes;
    Then choose iTunes Store;
    Then choose Account Management;
    Press Continue;
    Now choose iTunes Store Security and answer the bullet questions, then click Continue;
    Sign in with your Apple ID and press Continue;
    Under Contact Options fill out the information and advise iTunes that you would like your security/challenge questions reset;
    Click Send.
    You should get a response within 24 hours by email.
    Presently there appears to be problems on Apple's end, so it may be quite some time before they respond.
    Another user posted the following:
    I got some help from an apple assistant on the phone.
    It is kind of round about way to get in
    Here is what he said to do and it is working for me...
    1) on the device that is asking you for the security questions go to "settings", > "store" > tap the Apple ID and choose view"Apple ID" and sign in.
    2) Tap on payment information and add a credit/debit card of your preference then select "done", in the upper right corner
    3) sign out and back into iTunes on the device by going to "settings"> "store" > tap the Apple ID and choose "sign-out" > Tap "sign -in" > "use existing Apple ID" and you should be asked to verify your security code for the credit /debit card and NOT the security questions.
    4) At this time you can remove the card by going back in to edit the payment info and selecting "none" as the card type then saving the changes by selecting "done". You should now be able to use your iTunes store credit without answering the security questions.
    It's working for me ...I just have to put in my 3 digit security pin from the credit card I am using.
    Good Luck friends!

  • HT5312 Ok So I did everything it told me but then when I went to the part where it asks you the security questions (Third picture) It didnt have send reset security info thingy! So how am I supposed to reset them now?

    Ok So I did everything it told me but then when I went to the part where it asks you the security questions (Third picture) It didnt have send reset security info thingy! So how am I supposed to reset them now?

    The email response is automated, and almost certainly is detected as "junk" or "spam". So, try again and check your spam folders for their reply.

  • How do you reset the security question answers if you don't remember the answers to the questions?

    How do you reset the security question answers if, you don't remember the answers to those questions?

    Read this about how to change the security questions: http://support.apple.com/kb/HT5312
    If you can't use these procedures contact Apple. See http://support.apple.com/kb/HT5699

  • How to erase and reset your Galaxy S6 (and why you'd want to)

    Samsung has included some additional features to this function just in case you're doing something other than handing your Galaxy S6 off to another user.
    How to erase and reset your Galaxy S6 (and why you'd want to) | Android Central

    Hi,
    I'm in the same boat. I have an older 13" black MacBook and bought a new 13" MacBook Pro. Your outline isnt' what I experience, yet it's similar to the Apple Article at
    http://support.apple.com/kb/HT1820
    They have the following steps:
    These steps assume you have a Mac OS X 10.2.3 or later CD:
    1. Insert the Mac OS X CD.
    2. Restart the computer.
    3. Immediately after the startup sound, press and hold the "C" key to start up from CD.
    4. When the Installer screen appears, do not click Continue. Instead, choose Installer > Open Disk Utilities.
    5. Select the hard drive to erase.
    6. Click the Erase tab.
    7. Select the volume format from the Volume Format pop-up menu.
    8. Click Options.
    9. Select the checkbox for "Zero all data".
    10. Click OK.
    11. Click Erase
    I'm not sure if I'm obtaining what I want; Zero erase then reinstall. I'm using my OS X Leopard Install Disk. I did steps 1 - 3. As I held the "C" key, I got a gray screen with the Apple logo and a spinning icon below. It did this for about 3 minutes (my "c" holding finger was getting sore )
    I never got a step 4. It went straight to "Choose a Language" I did: English
    I never got choices 5 to 11.
    I got the screen showing the drive and asking if I want to install. I continued.
    I then opened the "Options" tab. There I could erase existing OS install and then reinstall. There was never a choice for "Zero All Data."
    I'm currently letting it do it's thing and it's in stalling, about 26 mins to go, already been about 20 mins.
    Did I miss something, or is the "zero" option not the same for Leopard?
    Much thanks,

  • Hallo,my name is Adrian and i forgot my security questions,how do i find out the answers or how do i reset them? Thank You

    hallo,my name is Adrian and i forgot my security questions,how do i find out the answers or how do i reset them? Thank You

    Alternatives for Help Resetting Security Questions and Rescue Mail
         1. Apple ID- All about Apple ID security questions.
         2. Rescue email address and how to reset Apple ID security questions
         3. Apple ID- Contacting Apple for help with Apple ID account security.
         4. Fill out and submit this form. Select the topic, Account Security.
         5.  Call Apple Customer Service: Contacting Apple for support in your
              country and ask to speak to Account Security.
    How to Manage your Apple ID: Manage My Apple ID

  • How to attach an object back to its source in a master page?

    Hello,
    on a content page I can access objects from the assigned master page using the Ctrl+Shift+LeftClick combination. By doing so I detach many attributes of this object from the master page specifications. How to reset an object and attach it back to the source object of the master page?
    If you are a PowerPoint user, the option reapply slide layout may be familiar to you (this function resets all format overrides to the master settings). I am looking for a similar function in InDesign.

    I really looking for a way to change the position of the second and third text boxes relative to other items on the page.
    An overriden master page item will still respond to its master's position if its position on the page after overriding hasn't been changed. So, you can have the "directions" box on the master page, override it, add text, and as long as you don't move its x, y position in the process of adding text, it can be moved via the master page in the future. The key is not to move it in the editing process.
    Same goes for other attributes. If the fill color is red, you can change it to gray from its master later, as long as you don't change the page item's fill to pink in between.
    It's also possible to match a changed page item's attributes to its master via scripting.
    So for example if you had a 3" text box on the master and there was 100 pages with the text box, and in the editing process 50 had their width changed to varying widths and later you decided you needed a 4"width— a simple script could loop through all the pages and reset the changed widths to match the master's new 4" width.

  • Cap 6 - how to capture quiz score/route based on score & prob with Master slide?

    Hi --Using Cap 6 on a Windows PC. I have a module with weighted questions, and want to analyze the score when the user completes the questions. If they score 69% or below, they must view the entire module. If they score between 70% and79%, then they can just take the quiz questions again. If they score 80% of better, their score is recorded in the LMS and they are given credit for the module.
    I have two challenges:
    1) The course originally was going to be an acknolwedgment-only module, so I deleted buttons from the results slide (not the results master) but when I select Reset Mater Slide in the slide properties, the deleted buttons do not re-apply onto the slide. How do I get those buttons back?
    2) I created an Advanced Action called start_over. It's simple - and the "Else" statement is "continue". I set this up in Quiz Pref. Does this also get assiend as an Action on the slide properties? 
    Result is that the quiz just stops. The quiz results slide displays - but without any content. If you select play again from the skin, the next slide is displayed.
    I have searched forum, etc., but can't find a solution -- I need to re-create this scenario for several other modules too. Thanks in "Advance" for help!
    G

    About your second question, think you are using the wrong system variable. It is hard to read, but I think you use cpQuizInfoQuizPassPercent, which is the percentage required for passing. And you should have used cpInfoPercentage, which is the percentage acquired by the learner. Have a look at my blog post about system variables:
    http://blog.lilybiri.com/system-variables-in-captivate-6
    But I don't think you need such an action for Quiz Preferences? Because you have two possible actions there: Success action and Failure action? Why need an advanced acton for a simple Jump?
    As for the score slide: Quiz Preferences, Settings: click the button Quiz Result Messages under Show score slide and you'll be able to mark the fields you want to show.
    You can also create a custom score slide:
    http://blog.lilybiri.com/question-question-slides-in-captivate
    http://blog.lilybiri.com/intermediate-score-slides
    Lilybiri

  • How do I get a copy of Acrobat with my CS5 Master Collection???

    I activated my Adobe CS5 Master Collection (running on Snow Leopard) with a serial number purchased from CDW and everything went smoothly, but after a few days of using the core products I typically use I noticed Acrobat was not included in the installed software.
    Now, Adobe lists Acrobat PRO as an included product in the Master Collection and rightfully so since it contans just about every product they make.
    When I emailed Adobe about this but the only response I got was some  pre-formatted auto-response probably sent to me from the help desk in  India or something. The auto-response said absolutely nothing about how to obtain a copy for the Mac, and just had a link taking me to the Acrobat home page, which basically says there is no trial version of Acrobat for Mac available for download.
    I gave up on it since I do not use Acrobat very much but now I am in a situation where I do need to have Acrobat Pro to finish a job and I cannot figure out how to get a copy installed with the Master Collection.
    There was no disclaimer indicating that you would not be able to get a copy of Acrobat when I purchased the downloadable version vs. buying a boxed DVD set, so I am expecting there must be a way.
    Adobe's help has been pretty much useless when I emailed them, and I cannot find anyone with the same problem on Google or in the Adobe forums, so is there someone out there who can give me the answer or help me?
    If I have to purchase a seperate copy of Acrobat so be it, but since it is supposed to be included with the Master Suite that would be kind of stupid if I have to purchase a copy of Acrobat seperately.
    Thanks to anyone who can point me in the right direction!!!

    This is just getting beyond ridiculous...
    AND I can see from several forum threads I am not alone in this issue.
    Adobe, you absolutely SUCK for making it so difficult to install this software. I am normally a fan of Adobe products, but now that you guys have bought out all your competiton you are getting lazy and stupid.
    This is the most ridiculous crap I've ever seen when trying to install a product I PURCHASED!!!!!!!
    So, after over another week (I have been trying to find a way to install Acrobat with my purchased copy of the Master Suite for MONTHS)...  My IT guy finally gets me the installer DMG for Acrobat and now I cannot install it with my master collection because the serial numbers are not the same?
    I never got a god damn serial number for Acrobat Pro when purchasing the master collection.
    Asking Adobe for help is totally worthless and not even worth taking the time to do so because all they give you is some BS pre-recorded response that doesn't help you with JACK...
    It has been a long time since I've had a problem installing a piece of software I PURCHASED.
    BOOOOOOOOOOOOOOOOOOOOOOOO!!!!!!!!!!!!!
    YOU SERIOUSLY SUCK ADOBE ON THIS ONE!!!!!!!!!!!

  • How to fix imessage error on ios8.1.2 .. Already reset network still same issue please help

    How to fix imessage error on ios8.1.2 .. Already reset network still same issue please help

    Hi ashmanryan36,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are having trouble with iMessage. It looks like you have already done some troubleshooting. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
    You did not mention what the error was but since you are running 8.1.2 and update is available and my help. 
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    Cheers,
    Mario

  • How to create a simple idoc in practice? can you provide an example?

    how to create a simple idoc in practice? can you provide an example with full source code?

    Try with the follwoing steps
    Sending System(Outbound ALE Process)
    Tcode SALE „³ for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 ¡V Create Model View
    Tcode BD82 ¡V Generate partner Profiles & Create Ports
    Tcode BD64 ¡V Distribute the Model view
    This is Receiving system Settings
    Receiving System(Inbound ALE )
    Tcode SALE „³ for
    a) Define Logical System
    b) Assign Client to Logical System
    Tcode SM59-RFC Destination
    Tcode BD64 ¡V Check for Model view whether it has distributed or not
    Tcode BD82 -- Generate partner Profiles & Create Ports
    Tcode BD11 Getting Material Data
    Tcode WE05 ¡V Idoc List for inbound status codes
    Message Type MATMAS
    Tcode BD10 ¡V Send Material Data
    Tcode WE05 ¡V Idoc List for watching any Errors
    1)a Goto Tcode SALE
    Click on Sending & Receiving Systems-->Select Logical Systems
    Here Define Logical Systems---> Click on Execute Button
    go for new entries
    1) System Name : ERP000
    Description : Sending System
    2) System Name : ERP800
    Description : Receiving System
    press Enter & Save
    it will ask Request
    if you want new request create new Request orpress continue for transfering the objects
    B) goto Tcode SALE
    Select Assign Client to Logical Systems-->Execute
    000--> Double click on this
    Give the following Information
    Client : ERP 000
    City :
    Logical System
    Currency
    Client role
    Save this Data
    Step 2) For RFC Creation
    Goto Tcode SM59-->Select R/3 Connects
    Click on Create Button
    RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
    give the information for required fields
    RFC Destination : ERP800
    Connection type: 3
    Description
    Target Host : ERP000
    System No:000
    lan : EN
    Client : 800
    User : Login User Name
    Password:
    save this & Test it & RemortLogin
    3)
    Goto Tcode BD64 -- click on Change mode button
    click on create moduleview
    short text : xxxxxxxxxxxxxx
    Technical Neme : MODEL_ALV
    save this & Press ok
    select your just created modelview Name :'MODEL_ALV'.
    goto add message type
    Model Name : MODEL_ALV
    sender : ERP000
    Receiver : ERP800
    Message type :MATMAS
    save & Press Enter
    4) Goto Tcode BD82
    Give Model View : MODEL_ALV
    Partner system : ERP800
    execute this by press F8 Button
    it will gives you sending system port No :A000000015(Like)
    5) Goto Tcode BD64
    seelct the modelview
    goto >edit>modelview-->distribute
    press ok & Press enter
    6)goto Tcode : BD10 for Material sending
    Material : mat_001
    Message Type : MATMAS
    Logical System : ERP800
    and Execute
    7)goto Tcode : BD11 for Material Receiving
    Material : mat_001
    Message Type : MATMAS
    and Execute --> 1 request idoc created for message type Matmas
    press enter
    Thanks & regards
    Sreenivas
    Here Master Idoc set for Messge type MATMAS-->press Enter
    1 Communication Idoc generated for Message Type
    this is your IDOC
    Take a look at this guide.
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/ale/configuration.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapdevelopment.co.uk/training
    http://www.sappro.com/downloads/OneClientDistribution.pdf
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    Create The Extension Segment
    Transaction: WE31
    The first step in extending an IDoc is to create the new segments that will go into that IDoc. There are some rules that you need to follow when creating the segments:
    - The name of each segment type must start with ‘Z1’
    - For each field in the segment you need to define a field name and a
    data element.
    - The data element for the segment structure must be of data type ‘CHAR’.
    How to create new segments:
    Run the segment maintenance transaction WE31.
    Type your new segment name, and click on Create.
    Define the fields of your segment:
    Field name
    Data Element for the field (from the ABAP dictionary).
    Do not change the Export length!
    Save the segment
    Run Segment -->Check to check the segment for consistency.
    Release the segment for transport. Select Edit -->Set Release. Note that the “Release’ column now has a check mark.
    Create the Extension IDoc Type
    Transaction: WE30
    After you create the segments to be added to the extension type, you can create the extension type itself. Execute transaction WE30, enter the extension name, select Extension type, and click Create. You now have three options:
    Create new type: Does not refer to other extension types
    Create copy: Copies info from an extension type that already exists
    Create successor: Extends an extension type from a previous release
    of R/3. You can only have one version of an extension type for
    each release.
    Enter the Basic IDoc type that this extension type will extend.
    The screen now shows the structure of the IDoc type you used as
    a reference.
    Position the cursor on one of the segments and click Create. This will insert an extension segment as a child of the selected segment.
    NOTE: A segment cannot appear more than once in an IDoc type! You must control the use of duplicate segments with the segment attributes (the next screen).
    The segment attribute screen appears. Enter the information and save.
    Extension segments should not be mandatory (for future upgrades), and will need to have minimum and maximum number of instances defined. This answers the question, “for each instance of the parent segment, how many instances of the child segment may we have?”
    You can press the Segment Editor pushbutton to view or change the segment definition.
    Create the new Message Type
    You can only use an extension IDoc type by assigning it to a message type. You can create a new message type for this.
    First the message type itself needs to be created.
    Transaction: WE81
    Create a new entry and save. Use SAP established customer naming conventions (good form is to start with a Z and retain the rest of the related SAP message type, so, for example, MATMAS becomes ZMATMAS).
    After creating the message type, associate it with the corresponding Basic IDoc Type and Extension Type. This relationship is used when IDocs are sent to or received from a partner to determine what segments are valid and what the hierarchy for those segments is.
    Transaction: WE82
    Create a new entry and enter the Message type, Basic IDoc type, Extension type, and Release, and save your data. Note: the release assignment is not valid for prior SAP releases.
    One message type can be associated with many basic IDoc types; however, you need a one-to-one relationship for distribution via ALE.
    regards,
    srinivas
    *reward for useful answers*</b>

  • How to modify a wrong tax category in the G/L master

    Hi, SAP experts,
    1. User using T-code "FS00" to create an operating expense G/L account '6492009', but choose the wrong Tax category( '>'
    output tax)  on the tab 'Control Data'.  It still create a cost element anyway.
    2. Then user create/post billing with the entries Dr. AR Cr. 6492009 and a cost center value can be assigned correctly.
    3. Now user using T-code "F-02" to post an adjust FI document,but meet the error message 'Account 6492009 requires an 
    assignment to a CO object'. But because of  the wrong Tax category, nowhere we can input the cost center value.
    4. Even we try to modify wrong Tax category back, we meet the error message "Changing the tax code not possible,
      accoutn has a balance".
    Here are my two questions: 1. Why the accounting document posted from the Billing is correct and normal
    disregarding the wrong Tax category setup? It shouldn't be posted successfully.  2. How do we change the tax category
    in the G/L master from  ( '>' output tax)  to ( '+' Only output tax allowed)  under the balance is not zero, then we can
    use T-code  "F-02"  to post ? Or we have to recreate a new G/L account to replace the current G/L account "6492009"?

    1. Why the accounting document posted from the Billing is correct and normal
    disregarding the wrong Tax category setup? It shouldn't be posted successfully > First, check your OB40 set up if the output tax account is correctly set up there. The system will still be able to post since the correct tax account assignment is maintained.
    2. How do we change the tax category
    in the G/L master from ( '>' output tax) to ( '+' Only output tax allowed) under the balance is not zero, then we can
    use T-code "F-02" to post ? Or we have to recreate a new G/L account to replace the current G/L account "6492009"? > you need to create a dummy GL account to transfer the balances from this account to make it zero then change the tax category of 6492009.

  • HT5312 So I have a problem with iTunes not letting me download anything without first responding to some security questions which I don't remember setting up, how can fix it? Oh, and it won't let me reset the questions either!

    So I have a problem with iTunes not letting me download anything without first responding to some security questions which I don't remember setting up, how can fix it? Oh, and it won't let me reset the questions either!

    If you mean that you aren't getting the reset link, then from the page that you posted from :
    Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so. 
    You can contact iTunes Support in your country via this page : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

  • HT1212 I have a new computer and I forgot the passcode to my iPod and I want to reset the whole thing how can i do that with a new computer?

    Someone please help!!
    I had an old crap laptop that wasn't apple and I used that for the past 2 years to sync my iPod but I have got rid of that and now I have an iMac. I have forgotton the 4 number digit passcode to my ipod and I have tried about 25 different combinations and I still cant get it right, so I just came to the conclusion that I have to reset the whole thing. I couldn't do it on my old laptop because it would keep running out of memory and I cant get it to connect to my new pc.
    Can someone please guide me through on how to connect it up to something to reset it. Thanks

    Read the article you linked

Maybe you are looking for