How do you mix audio from completely discrete channels?

discreet so that I can have more flexibility for volumes etc when I mix it in premiere. How can I separate the two channels then pan them back to center?

In the project panel select your clip, right click and select 'Modify footage' (or something like that) This will then give you the option to change the sound from stereo to 2 channel mono. I'm not at my editor at the moment so the answer might seem a little vague, if you have any problems come back, and I or someone else, will give you more details.

Similar Messages

How can you rip audio from video

How can you rip audio from a video using Itunes 11.1? I am using a pc win 8

Possible in iMovie 08 with a lot of tinkering. Easy in iMovie 9 and iMovie 11 with drag and drop.
See [Aaron's blog post for how to do it in iMovie 08|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.html]

How do you keep videos from completely playing in a slideshow (like the photos)?

In iPhoto, you can make slideshows to show photos for only 5 or however long of a duration you'd like... but when a video shows up in the show, all the pictures (depending on if you choose certain themes) will stick around on the screen as the video plays (or if the video is the only element in the current slide, also the video will completely play).
My question is.. is there any way to have the videos play for the same duration you set for the photos? Like.. to have everything.. videos AND photos.. to only play for like 5 seconds etc.
I ask this because I want to show a really big album I have at a party with a slideshow, but because of all the video I take, when some videos are a bit longer (say like 2 to 3 mintues), it kinds disrupts the flow of the slideshow (as compared to just showing a short 5 second clip of the video like with the photos only being for 5 seconds as well.
Is this possible, or does anyone know a workaround solution? I'd really like the videos to be in the slideshow too, but just not the whole videos.
We are talking thousands of photos and maybe hundreds of videos, here. Nothing I'd want to edit individually. iPhoto seems perfect for this if it would just only play portions of my video library instead of the whole videos.

No. The videos will play for their entire length. Try trimming the video in iPhoto by playing it and use the gear icon to bring up the Trip feature:
You'll get this window where you can select the portion of the video to use:
When you're done you can "revert to original" like this:
That may give you what you need for the slideshow.
OT

How do you eliminate audio from AECS3 project?

Hello,
Every time I import an AECS3 project into PPCS3, the AE project has an audio track even though I don't have any audio in the AE project.
What do I need to setup in AECS3 to get rid of the audio track?
Thanks,
Simon

Nothing. This is by design - Each Premiere Project has a sound track by default, so it simply is assumed that the AE project is missing it and needs one added.
Mylenium

TS5459 How do you get vocals from an ext mike/amp to record onto an audio track?

How do you get vocals (from an ext mike/amp setup to record decently onto an audio track? I had no problems doing this with my 2008 IMAC & Logic Pro Studio 8, but can't seem to do it with my new IMAC & Logic X. Very frustrating.

    The Korg 1600 doesn't seem to have a USB connection. It does have S/P DIF "IN" & "OUT", (which I have never used) and a SCSI site. With my older system, I had the IMAC 1st jack go directly to the Peavey or sometimes to one of the 8 imputs on the KORG 1600......so whatever I had prepared on LOGIC &/or ITUNES would play out. The 2nd IMAC jack connected to the MASTER OUT jacks on the back of the KORG 1600. The KORG 1600 acted as an interface. Vocals via microphone, or guitar, or instruments from the Triton Synthesizer went into the 1600 & recorded onto the Logic project Also on the back of the KORG 1600 was   MONITOR "RT & LT" output jacks that are connected to my Peavy mixer that in turn plays out through speakers.
    The Logic Preferences/Audio is as follows:        Devices is highlighted
                                                                          Output device: ;Built-in output
                                                                          Input device: Built-in microphone
                                                                          I/O buffer size: 128
   Thank you for trying to help me with this and for your patience. . (I'm good with music & other things, but not with computers.)

How do you import audio books so they are like the ones you buy from itunes

how do you import audio books so they are like the ones you buy from itunes?

There are a number of tools for merging the files into one. Personally I don't bother, but you'll find links on my page which describes how to manage Audiobooks on iPods.
tt2

How do you mix music in 5.1 Surround sound

HI all!
I'm fairly new to surround sound but not a complete novice- I know about panning, and the basics of how to use DTS Master Audio Suite, and the standard rules of placing vocals in the front speakers, effects in the surround speakers, etc...
My question is: How do you mix the music in whatever appropriate software whether it's Soundtrack Pro, Logic Pro, DTS Master Audio Suite, etc, so that part of the music filters into the surround speakers?
Disney for example manage to make music surround even when it was originally mono. I'm sure it must be really simple and I'm missing it, but any thoughts anybody?

Yeah, with music you go to the composer and get the multitracks from the studio and remix it in surround. SFX, voices, instruments, everything is an individual item placed in the proper location of the soundfield. You can't take a stereo music track and video shot with the nat sound mic and expect to create a 5.1 mix.

How do you monitor audio?

I have a few questions about monitoring audio in my fcp/stp projects.
Currently, I have a g5 quad that has an optical toslink output, that I use to connect to the optical in on a good denon home theater receiver (avr 3801). This is how i output my mac's audio. I have two B&W bookshelf speakers as my monitor speakers.
Is this acceptable to use to monitor my sound for my editing projects? I am not doing much music work, mostly just voice track cleanup on my video projects.
How do you connect audio equipment in your setup to monitor audio?
I am thinking of buying an Alesis 12 track multimix firewire mixer, is this a better interface to use and do I route the signal from the multimix to the receiver to get to the speakers, or should I just get powered monitor speakers and connect them to the mixer?
Also, when editing audio, which is mostly dialogue, is there a volume setting I should keep my receiver at and just work the levels in stp to get the volume right? My receiver has a volume level from -60Db to 0 to 18Db. I am worried about setting my project audio to high or too low.

Giving advice such as saying <Your B & W speakers might be good enough for the job, their lineage is as a studio monitor for the BBC. If you paid over $500/pr, and they sound good, then they're probably good enough. You can use them with a mixer hooked-up to your Mac and outputted to the Denon like in your current set-up> is so cool, if that was the case would,nt you think for a quick minute they would be recomended by pro or advertise as nearfield monitor and not hi-fi.
<conveinient to buy active monitors.> that ain't the case active monitors are made for monitor audio interms of listening to frequency that would be imposible to hear on hi-fi speakers which is the opposite of hi-fi which is more colour-full and does'nt give the true sound, also because its self-power and easy to plug and play.
<The playback volume you use is relative. Most of the engineers I've worked with over the past 30 years prefer to listen back at higher volumes> most pro enginineer listen to mix at very low D.B so as to know exactly what there getting, and after crank them up to hear the over-all levels, any engineer that linsten at loud D.B. does that to show off in seeking attention fr. clients making them feel as if the mix or the song is all that, take it outside the studio and its a different story! <listen back at higher volumes than I'm comfortable with,> thats what i have just explain.
<As far as the levels within the track are concerned, that is all done in the software, again per your preferences, and with an eye on the meters.> it would be nice of you to explain what meter are you talking about, and if it was all so easy with eyes on the meter, dont you think every mixing engineer or anyone attempting to mix would all were glasses, meter in sofware aren't the same as the meters in a pro studio, nor is it the same in hardware, also not all meters are the same where as mixing is concern, they are special meters prefreable know as V.U. meters, check below and you'll all get a better understanding of what i have just out-line, before giving wrong advice of monitor audio.
http://johnvestman.com/meter_madness.htm
Fr.BlayZay.

How do I extract audio from a movie?

How do I extract audio from a movie I downloaded from iTunes and save it to my iTunes library to use as a ringtone?

Do you have Qt Pro...?
If not, you may be able to extract the audio with this free program:
http://www.squared5.com/

How do you save photos from import or Photo Stream to an album?

How do you save photos from import or photo stream to an album? I have a MacBook Air (which keeps telling me my start-up disk is full) and I am trying to organize photos so there aren't duplicates and triples. I have photos in events, last import, photos and albums....I feel like they are all taking up space. If I move a photo from photo stream to an album, then delete the photo from photo steam its deleted from the album. That doesn't make sense to me. There should be a way to clean up photo stream, and events, and last import by putting photos into albums. Even more bizarre; I imported photos from my 4S, and only a fraction of them transferred over.
I am completely lost. Any help would be appreciated.
Thank you!
sarah

and I am trying to organize photos so there aren't duplicates and triples. I have photos in events, last import, photos and albums....I feel like they are all taking up space.
Sarah,
Only the photos you are seeing in the events and the Photo Stream will take up space. iPhoto stores each photo only one. After you import it, it will be assigned to one event.
Then you can use it in many albums and projects. Using the photo this way will only reference the one single copy of the photo in the event. The albums don't store the photos and do not require additional space. If you delete a photo from an event, it will be removed from all albums that have been using the this photos.
What you are seing are not actually duplicate photos but different ways to access the same photos.
The "Last event" is the same event as the last one you imported. It is there for a quick access to your recently imported photos. Photos is a quick access to all photos in your library as an endless stream of photos. These are also no duplicates.
So if you want to save space and delete photos, do that by browsing your events. Deleting a photo from an event will delete the original image file and remove the photo from all albums, books, and other products. You have only duplicate photos, if you are seing the same photo twice in an event.
Even more bizarre; I imported photos from my 4S, and only a fraction of them transferred over.
That is a different problem, but it may be related to to fact that you need to free space.
If you get a warning, that the system needs space, don't do anything but update the backup of your mac and move files to an external disk to free space.
It is not save to keep working, when the system is running out of space.
How much free space do you have? Anything below 15GB free space is really critical.
-- Léonie

How do you import music from media player?

How do you import music from windowz media player into Itunes?

Perhaps this article can help.
Importing Windows Media Audio into iTunes
B-rock

How do I route audio from a YouTube video to AU Lab using SoundFlower so that I can capture the YouTube video's sound stream?

How do I route audio from a YouTube video to AU Lab using SoundFlower so that I can capture the YouTube video's sound stream?

Attach camera via USB or put card in card reader.
Go to FCP, and go to the Log and TRANSFER window.
If FCP recognizes the card, you will see your clips listed on the left.
You can view them, set Ins and Outs, and import just what you want.
Once you choose a section of video and import it, FCP converts (transcodes) from its original camera format to Apple ProRes422 - a more edit friendly video file.

How do I play audio from my headphone jack and internal speakers?

How do I play audio from my headphone jack and internal speakers at the same time ? I have a splitter for my audio jack so that when i connect up my second monitor I can have it so it also plays audio as well as anything else i have connected into the jack but how do i let the internal speakers emit sound at the same time?

Hello,
If you mean the internal speakers in your Mac, you can't play audio through them at the same time you have anything plugged into the headphone jack. When you plug something into the headphone jack, it disconnects the internal speakers.

How do you transfer apps from an iPad to iPad2

how do you transfer apps from iPad to iPad2

If you just want to install the apps then you can either sync them from your computer's iTunes or re-download them directly on the iPad 2 : http://support.apple.com/kb/HT2519
If you want to sync the apps and their content from the frist gen iPad then you can backup the iPad 1, and then restore the iPad 2 from that backup (a list of what is included in a backup is in this article http://support.apple.com/kb/HT4079 - it excludes music, videos, synced photos). As the backup doesn't contain the actual apps, just their settings and content, for the restore to work completely you'll need all the relevant apps in your computer's iTunes library - otherwise the restore won't be able to install the apps and therefore their content (if you don't have the apps on your computer then you can re-download them for free : http://support.apple.com/kb/HT2519)

How do you remove ebooks from your ipad. not just arcive them get rid of them totally?

How do you remove ebooks from your ipad? Not just arcive them but get rid of them completly?

That all depends on which eBook app you're using. If you archive a book using the Kindle app, it is removed from your iPad. It's still available in your Kindle account should you ever wish to access it again but it's not taking up space on your device.

How do you mix audio from completely discrete channels?

Similar Messages

Maybe you are looking for