How do you monitor when an executable freezes up?

Has anyone been able to programmatically monitor whether or not a labview executable program has frozen up?  I am able to monitor when it crashes and closes - but not when it just simply freezes up and stops working but stays open.
Thanks for your help!

Check this link out for creating debuggable *.exe's.
CLA, LabVIEW Versions 2010-2013

Similar Messages

  • How do you fix a Snowball iMac freezing up?

    How do you fix a Snowball iMac freezing up?
    When booting up I get the white screen with the spinning blue disk and it won't move past that.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • On IOS 7, how can you tell when your battery is charging for your phone?

    on IOS 7, how can you tell when your battery is charging for your phone?

    thanks everyone=you all helped.
    I wasn't used to not getting the 2 sided plug- now I know I am ok>
    **hugs**

  • I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money? Does it have a line in and how do you monitor sound? Will I need adaptors and a interface?

    Can anybody help?
    I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
    Does it have a line in and how do you monitor sound?
    Will I need adaptors and an interface?
    Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
    I see all the upgrades as additional memory or a faster process?
    Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
    The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
    I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
    I have £500 already and willing to add another 500 to 700 pounds, then software extra.

    Can anybody help?
    I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
    Does it have a line in and how do you monitor sound?
    Will I need adaptors and an interface?
    Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
    I see all the upgrades as additional memory or a faster process?
    Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
    The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
    I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
    I have £500 already and willing to add another 500 to 700 pounds, then software extra.

  • How do you know when your MacBook is infected?

    Hey All. Well my question is how do you know when your MacBook is infected with a virus? I came off windows and i have norton antivirus so i have something to tell me there. But on the Mac OS you rarely get viruses and i dont have a anitvirus program, so how do you know when you have one? And what does it do?
    Thanks!

    Since no ones got one that I know of it is hard to say. I figure that when the day comes that someone writes a Mac virus you will know real quick what happens. If your concerned you could use ClamXav. I use it if I download something for my wife's PC but have never found anything yet.

  • How do you modify the default Execute thread count in Weblogic Server 9.2?

    How do you modify the default Execute thread count in Weblogic Server 9.2?
    How can you tune the starting number of weblogic.ExecuteThread on server startup and/or set minimum number?
    Is there an option from the console?
    Please let me know.
    Thanks

    Self tuning will automatically manage the threads but however you can still control the min and max by adding the min and max values for each instance either directly adding in config.xml or through JVM settings
    1) Modifying the config.xml
    Just add the following line(s) to each server definition :
    <server>
    <name>AdminServer</name>
    <self-tuning-thread-pool-size-min>100</self-tuning-thread-pool-size-min>
    <self-tuning-thread-pool-size-max>200</self-tuning-thread-pool-size-max>
    </server>
    2) Adding some JVM parameters
    It's safer the following way :
    add the following option in your command line : -Dweblogic.threadpool.MinPoolSize=100
    Regards
    RR

  • How do you monitor backup progress

    How can you monitor the progress of a backup? I use timemachine and an external drive  to do my backups on my 09 Macbook pro. I want to be able to see the amount of files transferred and time remaining or any other pertinent info. Not just a spinning wheel.

    I don't know, I use bootable clones myself and it shows me the progress of the backup and updating of files.
    However I can point you to this guy who is the local TM guru
    All about Time Machine
    If you want to learn more about all sorts of backups to diversify your restore options (TM can fail to restore properly), including bootable clones etc. then read my UT here on the subject.
    Most commonly used backup methods explained
    I personally don't use TimeMachine, preferring the more advanced bootable clone options.

  • Please Help.  How can you monitor a directory using jndi connection to a ldap server?

    How can you monitor a directory using jndi connection to a ldap server? I
    want the ldap server to monitor the content change in a file system
    directory on another computer on the network. Can someone please help.
    Thanks
    Fred

    Hi,
    Why do you want to use LDAP for Hard disk monitoring..???
    U can do this by creating a MD5 checksum for all the files existing in some
    perticular
    directory and every hour or any configurable period u can recalculate the
    checksum
    to find out the change in the content.
    I guess all u need is to get the code for "updatedb" utility of Linux and
    instrument it for ur needs..
    Hope it helps...
    -aseem
    mr wrote:
    How can you monitor a directory using jndi connection to a ldap server? I
    want the ldap server to monitor the content change in a file system
    directory on another computer on the network. Can someone please help.
    Thanks
    Fred

  • How can you know when your Apple Pass word has expired?

    How do you know when your Apple password expires?

    They were wrong.  Apple Passwords don't expire. Unless you choose to change it, your Apple password can stay with you forever.

  • How do you know when the music is synced to an ipod classic? I don't see it showing it in the window.

    how do you know when the music is synced to the ipod?the lod version would show it syncing in the window at the top of the screen this version doesn't.

    If you have access to a Mac couldn't you receive your verification via iMessage and work to view you iCloud Account?

  • How do you know when you have the latest software updates

    how do you know when yo have the lastest software updates on your older IPOD?  I just purchased on home theater to replace one, Samsung, I was assured that the system would run my IPOD.  I've sync'd my IPOD to my computer a number of times before the purchase and since.  Samsung is telling me that I need to update my IPOD.  My ITunes keeps telling me there aren't any updates out there.

    Read the top of the page I gave you the link to. The
    latest update that you do not have only added more
    support for the Shuffle. If you are not having any
    problems leave as is. If you have problems then
    download the update. It will ask you for your user
    ID. Once you install the updater, your computer will
    reboot.
    This is what it says at the download site.. iPod Software 1.0
    * iPod with video
    Everything is working fine Barb with the ipod but I was under the assumption that if an update is available, I should download it...

  • How do you monitor audio?

    I have a few questions about monitoring audio in my fcp/stp projects.
    Currently, I have a g5 quad that has an optical toslink output, that I use to connect to the optical in on a good denon home theater receiver (avr 3801). This is how i output my mac's audio. I have two B&W bookshelf speakers as my monitor speakers.
    Is this acceptable to use to monitor my sound for my editing projects? I am not doing much music work, mostly just voice track cleanup on my video projects.
    How do you connect audio equipment in your setup to monitor audio?
    I am thinking of buying an Alesis 12 track multimix firewire mixer, is this a better interface to use and do I route the signal from the multimix to the receiver to get to the speakers, or should I just get powered monitor speakers and connect them to the mixer?
    Also, when editing audio, which is mostly dialogue, is there a volume setting I should keep my receiver at and just work the levels in stp to get the volume right? My receiver has a volume level from -60Db to 0 to 18Db. I am worried about setting my project audio to high or too low.

    Giving advice such as saying <Your B & W speakers might be good enough for the job, their lineage is as a studio monitor for the BBC. If you paid over $500/pr, and they sound good, then they're probably good enough. You can use them with a mixer hooked-up to your Mac and outputted to the Denon like in your current set-up> is so cool, if that was the case would,nt you think for a quick minute they would be recomended by pro or advertise as nearfield monitor and not hi-fi.
    <conveinient to buy active monitors.> that ain't the case active monitors are made for monitor audio interms of listening to frequency that would be imposible to hear on hi-fi speakers which is the opposite of hi-fi which is more colour-full and does'nt give the true sound, also because its self-power and easy to plug and play.
    <The playback volume you use is relative. Most of the engineers I've worked with over the past 30 years prefer to listen back at higher volumes> most pro enginineer listen to mix at very low D.B so as to know exactly what there getting, and after crank them up to hear the over-all levels, any engineer that linsten at loud D.B. does that to show off in seeking attention fr. clients making them feel as if the mix or the song is all that, take it outside the studio and its a different story! <listen back at higher volumes than I'm comfortable with,> thats what i have just explain.
    <As far as the levels within the track are concerned, that is all done in the software, again per your preferences, and with an eye on the meters.> it would be nice of you to explain what meter are you talking about, and if it was all so easy with eyes on the meter, dont you think every mixing engineer or anyone attempting to mix would all were glasses, meter in sofware aren't the same as the meters in a pro studio, nor is it the same in hardware, also not all meters are the same where as mixing is concern, they are special meters prefreable know as V.U. meters, check below and you'll all get a better understanding of what i have just out-line, before giving wrong advice of monitor audio.
    http://johnvestman.com/meter_madness.htm
    Fr.BlayZay.

  • How do you monitor your systems?

    I'd like to be able to monitor my Ironport systems to be able to see
    * SMTP up/down on each interface
    * active recipient queue size
    * CPU/RAM/Disk use (as a %)
    * number of connections in last 5 minutes
    * ...In fact some of the data from the system status and system overview screens in the GUI.
    But I don't want to manually log in to the GUI/CLI to manually check this.
    I was hoping the SNMP interface would expose these counters then I can easily bolt the Ironports into my existing monitor system, set some thresholds and get alerted when something might be wrong.
    Do you have automatic monitoring of the systems?
    How have you set it up?
    Right now all I have in place is checking via ping and that the SMTP port is open on the exposed interfaces. No monitoring of the system counters.

    Corey, are your company using Hypersoft for mail tracking and reporting for the complete mailflow from IronPort-Internal Mail system-users mailboxes? We are using HyperSoft Omni Analyser for internal mailtracking and reporting (our e-mail system is based on Lotus Domino).
    It would be great to have a solution that covers the complete mailflow. I have had a lot of phonecalls the last week with our salesrep from HyperSoft to find out what HyperSoft can offer. The salesrep seems to have a tight connection with HyperSoft development here in Europe and the IronPort add-on to their existing reporting sw is still under development and they need input for what functions and features we customers need. The MFC mail tracking is great, the reports are ok but IronPort has no soulution for monitoring system status.
    I told Hypersoft that it would be nice to have a one tool for mail tracking, reporting and system status monitoring. I have sent HyperSoft mail logs from our IronPort for mail tracking and reporting and the demo reports look promising. In order to get systems status HyperSoft could either use the status logs for historical reports or use the XML pages provided (like ironportip/xml/status) or both.
    Are there other interfaces IronPort provides in order to get system status, except for snmp? I look forward to feedback/ideas
    Thanks /Micke

  • How do you sort specific columns and freeze a header column?

    I'm creating a list of people attending a workshop and would like the first column to be the number of people attending. The first column is the number and that row sorts with the rest, so then my numbers go 1, 9, 5, etc instead of remaining 1-20. Is there a different way for me to determing the number? I put 1 in cell A 2 and then for A 3 I give it a formula A1 + 1 to create the number sequence. I've tried making it a header column and freezing the column, but it still changes.
    thanks,
    Nancy

    Nancy,
    You can search the discussions when you have a specific question, or you can just browse them from time to time to see what there is to be learned. Your question is a little like "How did you learn to be a good cook?" Most of the good home cooks never went to cooking school, but they have had lots of good coaching and lots of experience. Many of the helpers here have been using spreadsheets for so long that they don't remember when they learned a particular trick or method. And, we like to share, so keep the questions coming.
    I keep the Formula Browser in view, and I study the examples for the functions I think I might want to use.
    Regards,
    Jerry

  • What do you do when your iPad freezes up. The message "iCloud Backup appears and reads "This iPad hasn't been backed uo in 6 weeks. Backups happen when this iPad is plugged in, locked and connected to Wi-Fi." Each night I plug my iPad in to recharge.

    What do yoou do when your iPad freezes up. My iPad is plugged in each night and is connected to Wi-Fi. This morning the following message appears:
    iCloud Backup
    "This iPad hasn't been backed up in 6 weeks. Backups happen when this iPad is plugged in, locked, and connected to Wi-Fi."
    I press OK and it does not budge. I try to power off. The red arrow appears but it does not slide to power off. The iPad has simply frozen on the home page.
    Mike

    Try resetting it by holding the power and home buttons at the same time until you see the Apple logo, then releasing.  You won't lose any data by doing this.

Maybe you are looking for