How do you mute using the nokia headset for N97

When using the nokia provided headset with the N97, how can you mute the call. I see there is a slider button on the side of the control unit, but I have tried using this to no avail. to mute i have continued ot use the phone controls, which almost negates the point of using a headset in the first place.
thanks
Solved!
Go to Solution.

I do not know how to mute it using the headset, but AFAIK the slider button on the headset was to keypad lock the headset control piece.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Similar Messages

  • How do you turn off the special characters for letters?

    How do you turn off the special characters for letters? Where you hold down the key and it comes up with variations of the letter. For example ï í î ò œ å ß ł û
    It is very annoying when I try to play any online games. Thanks for the help

    Thank you so much It worked Thank you

  • I have a new time capsule how do you turn up the transmitting power for wifi

    I have a new time capsule how do you turn up the transmitting power?

    Transmit Power is set by default at 100%, the maximum allowed by law. 
    There are no settings to allow higher output.

  • HT4759 Is it true that when setting up devices with the find my phone app you must use the same account for ICloud ? If so how do I delete a current account to make it read as the other ICloud accounts?

    I'm setting up my devices with the find my phone app. I have accomplished setting up 2 devices. The third I can't setup because I can't change the iCloud account.
    My understanding from reading that the iCloud accounts must use the same name on all devices. How do I change that account in my phone settings?

    You don't have to use the same iCloud account in order to track all your devices.  You just have to sign into the iCloud account being used on the device you are trying to track in order to track it.  When you sign in on icloud.com and open Find My iPhone, you will see all the devices with Find My iPhone enabled that are using the account you signed in with.  To track a device using a different account, simply sign out, then sign back in using the ID the new device is using.
    The Find My iPhone app works the same way.  It will display devices based on the iCloud account you sign in with on the app.  To track a device using a different account, sign out, then sign back in with the iCloud ID that the new device is using.

  • How to keep iPad and iPod apps sync separate if you are using the same PC for backups

    Syncing the iPad and iPod using the same PC syncs the apps between the devices. How an Thisbe avoided I don't want to use the same apps in all my devices.

    No problem.  The computer's iTunes keeps track by serial number.  The human keeps track by a unique name for each one.  In my case, the iPad is cleverly named "George's iPad" while the iPod is equally cleverly named "George's iPod."

  • Vista - how do you make iTunes the default player for audio files?

    Having started using iTunes on a new Vista PC, I've found that it defaults back to Windows Media as the default audio file player every time the machine is rebooted.
    But worse than that, I cannot find any option to make iTunes the default player for MP3 files - under the Vista settings, the ONLY option offered is Windows Media: there is not even a box to tick for iTunes.
    Have others found this? Is there any way around this?
    (I thought that Microsoft was legally precluded from making these kind of enforced settings now???)

    Although I now seem to have successfully made iTunes the default player for audio files, iTunes has started putting up this message:
    "The iTunes Music Library file cannot be saved. You do not have enough access privileges for this operation."
    A quick scan of the forum shows this problem has come up quite a few times, but I'm far from clear if there is a definitive answer/solution. I am the administrator for the computer. It sounds worrying that the Library file is not being saved - should I be worried?

  • How do you globally change the default program for opening photo files?

    I want to adjust my system so that when I double click a photo file, Preview does not automatically launch.  I work in Photoshop all the time and would prefer that it be the default program for pictures.  I have already changed the "when you insert a picture CD" command in CD's & DVD's in System preferences but this does not have any effect on when I double click on a picture file to open it; Preview always launches and opens the picture there.  That automatic opening behavior is fine but I need it to happen in Photoshop.

    Assuming your pictures are all .jpg files: select any .jpg by clicking once on it in the Finder, then press Command+I to Get Info about it. In the Open With: section of the Get Info window, change the preferred application from Preview to Photoshop, then click the Change All button.
    Now any .jpg file that you double-click will open in Photoshop.

  • How do you determine in the voice listing for the bill if the call is incoming or outgoing

    I have selected the "Calls, Messages, Data" tab and clicked on voice, but the detail does not indicate if I made the call or received it.  I tried clicking on "View Additional Call Detail" but all it does it make the screen go gray and does nothing.
    I get to and from information on messaging but not calls.   Am I looking in the wrong place.

        Hi rsm711!
    You pose a great question, and I'm happy to help. I checked online, and I see that the origination and termination of calls are not listed on vzw.com but if you click on the "View and Save Printable Bill" link, after clicking the "View Current Bill" link from the homepage, you can see whether the calls were incoming or outgoing.
    Once the bill pulls up, you will be able to view all of the call details for each line. You can save the bill to your PC from there, as well as print the bill (or a portion of it).
    I hope this helps, have a great day!
    Christina B
    VZW Support
    Follow us on Twitter @VZWSupport

  • How do you set/find the directory path for /i/

    Searching the forum, I found one note that indicated this was set in MARVEL.CONF (since I'm running 2.0, presumably DADS.CONF). However, looking at the DADS file for my install, I don't see anything resembling a directory mapping. What would the syntax be for this?

    In a default installation, you are supposed to add the mapping to httpd.conf
    But it could be in any file Apache includes.
    Seach for a line like
    Alias /i/     "/opt/oracle/product/10.1.0/Apache/Apache/images/"

  • HT201320 how do you know what the server is for microsoft exchange

    I'm trying to set up another email account through my iphone. This email uses Microsoft Exchange. I put in the email, username, and password. It is now asking for a 'server'. I'm not sure what it is or where to find it. Please help!
    Thanks!

    Contact your IT dept.

  • How to copy and use the RAID files for ATI SB600 for a new build

    WinXP Home
    MSI K9A Platinum
    AMD Athlon X2-3600+
    2 x Seagate 250GB SATA2 3GB/s HHD
    2 x HIS X1950Pro in Crossfire
    2 x OCZ2A8002GK Crossfire certified modules
    Enermax Galaxy 850
    Hello, I plan on setting this new build up with SATA RAID 0. I tried to follow the ReadMe file in the RAID drivers download but think I am not fully understanding. The ReadMe says to copy all files to the media...it said floppy but I am going to use a flash drive. I did so but there were two folders, X64 and  X86. Do I open those two folders and copy all the contents or do I just copy the two folders directly to the drive?
    Thank you

    Quote from: lewislink on 05-July-07, 02:13:43
    Open the sub-folders and copy their contents, or copy the sub-folders, themselves?
    What about BIOS update? Will it be necessary to use a floppy or can a flash drive function?
    "What about BIOS update? Will it be necessary to use a floppy or can a flash drive function?"
    don't update the BIOS when everythink is working...
    "Open the sub-folders and copy their contents, or copy the sub-folders, themselves?"
    copy them as is.. directly with sub-folders included.

  • British Columbia BC users - how are you dealing with the PST Exemption for Youth Products?

    Hi BC Community,
    Reaching out to everyone and anyone to help with this.  Has anyone had any luck (in British Columbia) dealing with PST Exemption for Youth product? More specifically if a product has a full tax item (12%) and a Youth Exempt Item (5%) in the cart, at the same time.
    As you know, if you add to British Columbia Tax Codes (BC-12% and BC-5%) and you have product in your cart, like the above mentioned - the Destination State overrides any product level Tax Codes.
    Looking for some help with this one.
    Thanks,
    Aaron

    Hi BC Community,
    Reaching out to everyone and anyone to help with this.  Has anyone had any luck (in British Columbia) dealing with PST Exemption for Youth product? More specifically if a product has a full tax item (12%) and a Youth Exempt Item (5%) in the cart, at the same time.
    As you know, if you add to British Columbia Tax Codes (BC-12% and BC-5%) and you have product in your cart, like the above mentioned - the Destination State overrides any product level Tax Codes.
    Looking for some help with this one.
    Thanks,
    Aaron

  • How do you effectively use if,for, type loops in TestStand. Do you have to use the goto command or is there a way of writing actual c type code (perhaps using the statement step in teststand) with the variables allready declared.

    Thank you
    Arik

    I assume your loop is more than just one step. You should use the 'Loop Options' for a single step.
    For looping on a group of steps, you can place them all in a sub sequence and then set the 'Loop Options' for the 'SequenceCall' step to set up your looping conditions. Pass values to and from the sub-sequence by Parameters.
    You can keep the loop inline with the rest of your sequence by using 'Goto' or using 'Goto destination' in the Post Actions tab of the condition step.
    Using a sub sequence will keep it easier to read and maintain.

  • How to install and use the CP2102 USART to USB Converter?

    First off, I did a quick search and found that some people had had success in that the cp210x driver was already installed on their machines. I did a modprobe and it returned nothing (not an error).
    I searched around on the net a bit and found a very useful USART to USB converter bridge (http://www.nexuscyber.com/cp2102-usb-to … Mgod5UQAdQ). The CP2102 is a programmable device with many settings insofar as the data framing is concerned. As such, a driver for the device must be used to interface and modify these parameters.
    On the Silabs website I found this driver (http://www.silabs.com/products/mcu/page … ivers.aspx) for linux (kernel > 3.x.x). The problem is that this driver is just a single C program with zero documentation. An include make file is about as useful considering it has a single line in it that fails (for me) at run-time.
    obj-m = cp210x.o
    KVERSION = $(shell uname -r)
    all:
    make -C /lib/modules/$(KVERSION)/build M=$(PWD) modules
    clean:
    make -C /lib/modules/$(KVERSION)/build M=$(PWD) clean
    The driver source can be found here (http://pastie.org/private/kulx2zqdyvkafoxekwjq)
    Where my make error is
    make -C /lib/modules/3.14.4-1-ARCH/build M= modules
    make[1]: Entering directory '/usr/lib/modules/3.14.4-1-ARCH/build'
    HOSTCC scripts/basic/fixdep
    HOSTCC scripts/kconfig/conf.o
    HOSTCC scripts/kconfig/zconf.tab.o
    In file included from scripts/kconfig/zconf.tab.c:2537:0:
    scripts/kconfig/menu.c: In function 'get_symbol_str':
    scripts/kconfig/menu.c:587:18: warning: 'jump' may be used uninitialized in this function [-Wmaybe-uninitialized]
    jump->offset = strlen(r->s);
    ^
    scripts/kconfig/menu.c:548:19: note: 'jump' was declared here
    struct jump_key *jump;
    ^
    HOSTLD scripts/kconfig/conf
    scripts/kconfig/conf --silentoldconfig Kconfig
    scripts/Makefile.build:44: /usr/lib/modules/3.14.4-1-ARCH/build/arch/x86/syscalls/Makefile: No such file or directory
    make[2]: *** No rule to make target '/usr/lib/modules/3.14.4-1-ARCH/build/arch/x86/syscalls/Makefile'. Stop.
    /usr/lib/modules/3.14.4-1-ARCH/build/arch/x86/Makefile:185: recipe for target 'archheaders' failed
    make[1]: *** [archheaders] Error 2
    make[1]: Leaving directory '/usr/lib/modules/3.14.4-1-ARCH/build'
    Makefile:4: recipe for target 'all' failed
    make: *** [all] Error 2
    If I do not sudo make I just get this:
    .probe = usb_serial_probe,
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:165:16: error: 'usb_serial_disconnect' undeclared here (not in a function)
    .disconnect = usb_serial_disconnect,
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_get_config':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:321:3: error: implicit declaration of function 'dbg' [-Werror=implicit-function-declaration]
    dbg("%s - Unable to send config request, "
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_open':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:430:36: error: 'struct usb_serial_port' has no member named 'number'
    dbg("%s - port %d", __func__, port->number);
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_close':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:451:36: error: 'struct usb_serial_port' has no member named 'number'
    dbg("%s - port %d", __func__, port->number);
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_get_termios':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:534:17: error: invalid type argument of '->' (have 'struct ktermios')
    &tty->termios->c_cflag, &baud);
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_get_termios_port':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:556:36: error: 'struct usb_serial_port' has no member named 'number'
    dbg("%s - port %d", __func__, port->number);
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_change_speed':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:706:21: error: invalid type argument of '->' (have 'struct ktermios')
    baud = tty->termios->c_ospeed;
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_set_termios':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:735:36: error: 'struct usb_serial_port' has no member named 'number'
    dbg("%s - port %d", __func__, port->number);
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:740:22: error: invalid type argument of '->' (have 'struct ktermios')
    cflag = tty->termios->c_cflag;
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_tiocmset_port':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:871:36: error: 'struct usb_serial_port' has no member named 'number'
    dbg("%s - port %d", __func__, port->number);
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_tiocmget':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:910:36: error: 'struct usb_serial_port' has no member named 'number'
    dbg("%s - port %d", __func__, port->number);
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_break_ctl':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:932:36: error: 'struct usb_serial_port' has no member named 'number'
    dbg("%s - port %d", __func__, port->number);
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c: In function 'cp210x_init':
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:989:2: error: implicit declaration of function 'usb_serial_register' [-Werror=implicit-function-declaration]
    retval = usb_serial_register(&cp210x_device);
    ^
    /home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.c:996:3: error: implicit declaration of function 'usb_serial_deregister' [-Werror=implicit-function-declaration]
    usb_serial_deregister(&cp210x_device);
    ^
    cc1: some warnings being treated as errors
    scripts/Makefile.build:314: recipe for target '/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.o' failed
    make[2]: *** [/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source/cp210x.o] Error 1
    Makefile:1274: recipe for target '_module_/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source' failed
    make[1]: *** [_module_/home/branden/Desktop/Linux_3.x.x_VCP_Driver_Source] Error 2
    make[1]: Leaving directory '/usr/lib/modules/3.14.4-1-ARCH/build'
    Makefile:4: recipe for target 'all' failed
    make: *** [all] Error 2
    There is no documentation aside from:
    make ( your cp210x driver )
    cp cp210x.ko to /lib/modules/<kernel-version>/kernel/drivers/usb/serial
    insmod /lib/modules/<kernel-version/kernel/drivers/usb/serial/usbserial.ko
    insmod cp210x.ko
    Can anyone provide some guidance on the steps to install this driver (or at least where to look) and why there is such a lack of documentation? Are there assumptions here that I am not aware of? How is anyone suppose to use this? If you look in the source there are structures being used as arguments to functions that are never defined as far as I can tell. Perhaps they are part of the header files included at the top, but I could not find some of those on my machine either.
    Has anyone had success using this device?

    ewaller wrote:<hopeful>Do you have an oscilloscope? </hopeful>
    First, I think you have a mismatched Baud.  Check your settings in GtkTerm.  It could also be the uController.  I know you said you have it set for 9600 Baud, but are you sure?  The divisor settings are dependent on your clock frequency.  Are you sure you are using the correct divisors for the frequency of your crystal?  And are you using a crystal, ceramic oscillator, or external oscillator for your time base?
    I did not think the internal RC oscillators were that bad off, so I was using the internal 8MHz (DIV8 = 0 fuse bit). Taking your advice I just refused the AVR and set it to use a 20MHz clock (external crystal oscillator) to no avail. The setting in GTKterm is certainly 9600 baud.Referencing the datasheet for the Atmega328P we have:
    Which gives a a UBRR register value of 129 corresponding to normal speed (U2Xn = 0). This is all computed for me at compile-time via this formula:
    20,000,000/(16*9600) - 1 = 129.2 ~ 129 truncated.
    That the two devices can communicate tells me they both might be using the same wrong Baud.
    I was also suspicious of this .. I do not have a trivial way to test this though. Perhaps some workaround using timers is about the best I can do; no oscilloscope here. Doing a quick high-level test I did find something rather interesting though. Both devices are set to run at 9600 baud. One device is operating at 8MHz (internal oscillator) and the other is using an external 20MHz crystal. I am getting UART communication between the devices, but certainly not the characters I'm sending..
    The other problem is that I think you have "Local Echo" turned on in GtkTerm.  This places the system in "Half Duplex" mode in which data are not expected to be echoed from the Atmel.  That you are getting two characters when the pins are shorted tells me you get the local echo and the loopback.  Then the loopback is missing, you still get the local echo.   Also, make sure you have parity turned off.
    GTKterm does not actually show you what you are typing into the terminal. That is, when you type a character then nothing is displayed to the screen. Presumably this character is sent out as you type it. I was under the impression that local echo would just echo what I type to the screen as well as send it out. Thank you for the clarification.
    Last edited by sherrellbc (2014-05-28 03:16:48)

  • HT204053 I have multiple devices used by family members, how do you make sure the kids don't see Moms messages from Dad and visa versa?

    I have multiple devices used by family members, how do you make sure the kids don't see Moms messages from Dad and visa versa?

    Hi Roger:
    Thanks for the reply.  I think I figured out the problem.  Apple has confused (at least in my mind) the different IDs that people can have.  In the iCloud settings, they use the term Apple ID and not iCloud ID.  I guess there really is no such thing as an iCloud ID.  There are Apple IDs with various attributes.  This is not clearly explained or easy to see (how could I look up to see if my Apple ID is associated with iTunes for example?).
    I created, what I thought were iCloud IDs for each family member, but we all use my Apple ID for iTunes.
    One other question - why does the syncing of Notes using iCloud require an @me.com email account.  That makes no sense to me.
    Thanks for your help!
    AO

Maybe you are looking for