How do you perform a clean installation of Tiger?

Can someone explain the process of installing a clean copy of Tiger on a Mac that already has Tiger on it (after backing up of course). I know how to do this on windows, but have never formatted and reinstalled the OS on a Mac before. Any help would be appreciated.
Thanks!

From Disk Utility, go to Restore Tab. From there you select the source and target and it will do a volume copy. Make sure it boots and works.
You can use FireWire or 2nd internal drive for your backup.
Having a bootable backup is one of the most essential things you can do to eliminate and avoid problems.
There are a couple good books I got my brother, we've both used computers for 40 yrs but he never used a Mac before.
Switching to Mac, Tiger Ed.
Mac OS X Missing Manual
http://www.apple.com/macosx/resources/

Similar Messages

  • HT1338 how do you perform a clean install for imac

    How to perform a clean install for imac, because I cannot upgrade to version 10.6?

    Here are the technical requirements for Snow Leopard:
    http://support.apple.com/kb/sp575
    If your iMac meets the requirements, then you will have to purchase the Snow Leopard disk from apple:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    To reinstall your OS, insert the original OS disk that came with your iMac and start up the iMac holding the C key.  Start the installation process and when you see the menu bar, select 'Utilities'. From the drop down menu, select Disk Utility.  Erase the HDD and the continue the installation.
    Note that this will erase all data on the HDD so have it backed up before you start.
    Ciao.

  • How do I perform a clean install of Lion Server?

    There seem to be many sites documenting how to pull out the ESD image and burn a bootable copy of Lion.
    What I'd like to know is how do I perform a clean installation of Lion Server?
    Is it possible to just install Lion and then open the App Store and install from Purchase without being charged again?

    Okay....so Apple does have a guide related to Mass deployment which includes a rough way to do a clean OS X Server clean install. You need to use a NetBoot Lion Server as a boot, but it works.
    http://support.apple.com/kb/HT4746
    Use these steps to create a NetRestore image of an un-configured Lion Server:
    Install OS X Lion, and then Lion Server. This server will be used to create the NetRestore image.
    On the server, install the app named "Install Mac OS X Lion" from the Mac App Store (a network connection is required for this process).
    Install the Server Admin Tools from http://support.apple.com/downloads/ on the server.
    Open the "Install Mac OS X Lion" application, and install to an empty volume. This volume can be a spare partition or external hard drive. Be sure to click the Customize button and to select the Lion Server software.
    Once installation is complete, the server will restart from the newly installed volume.  Instead of completing the setup assistant, press Command-Q to quit the assistant.
    Select the option to shut the server down.
    Restart the server and hold the Option key.
    When the Startup Manager appears, select the volume which you've already configured Lion Server on.
    Open System Image Utility and create a NetRestore image from the newly installed (and still un-configured) volume. If you'd prefer to image the volume after it has already been configured, you can proceed with the setup assistant before booting back to the original installation created in step 1.

  • How to make Windows 7 Clean Installation with the Rapid Boot extreme feature on ThinkPad T420s

    How to make Windows 7 Clean Installation with the Rapid Boot extreme feature on ThinkPad T420s

    @Bennycui,
    Clean install here
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-77353
    Then install RapidBoot
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-77013
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • How do you perform a full system restore for the hp officejet 6500

    Basically, after having this printer for 1 year, the wireless printing started to not work correctly. After buying a laptop and trying to configure the printer with it, the printer started to have problems with wireless printing. So how do you perform a FULL factory reset? I already tried hitting #9 while the printer was turning on but it only seemed to partially reset the system. It did not turn it back to the day i bought the printer.

    OK, so it turns out it was the 'only show synced content' tick box.
    Wow, how embarrassed do I feel now? I never even paid any attention to that tick box all these years.
    Interestingly, over the last couple of days I had my ATV at v1.1 again, and happily deleted all my content (except for 1 album which I deliberately left on). A few days went past, and I checked daily - and there was only ever the 1 album.
    I then upgraded to ATV v3.0.1 again today and that's when my problems came back - all my content magically reappeared on the Apple TV (or so I thought).
    I'm thinking maybe that the 'only show synced content' is a recent 3.0 feature? And if so, maybe that's why I never noticed it before and that's why it was confusing me? Or maybe it's been there all these years (in which case I'll carry on being embarrassed).
    Anyway, a huge thanks to everyone who responded.
    Brad

  • How do you do a  Clean install lion

    How do you do a clean install of lion? My iMac is 8 yr old and has gotten sluggish. At one point it was suggested that I might want to do a clean install but no one ever told me how to do that since we don't have a disk!

    Assuming you already have Lion installed, boot into Recovery Mode (Command-R). From there you can reinstall Lion. Note, however, that a clean install means you first erase the drive you want to do the clean install on, and unless you have a complete backup of everything that's currently on it, you'll lose it all; the clean install will leave you with a fresh operating system but nothing else. To get it all back, make that external clone, then when the clean install is finished on the internal, Setup Assitant will run and you can point it at the external clone to get all your stuff back.

  • How do I do a Clean install of Tiger and Classic?

    My G4 came with Jaguar. OS 9 was part of the complete installation, that you could install or choose not to install. My computer has been having a lot of issues lately and I think that a clean install would be a good idea, especially, since I used an upgrade to install Panther and then installed Tiger on top of Panther. I want to install classic and Tiger. How do I do this properly? Thanks

    I plan to back up my personal files and any
    downloaded software I have.
    Amazing that. You've told us that numerous times, but
    you've failed to provide us with information on
    HOW you're going to do this. That is, please
    explain WHAT you're using for the backup and
    WHERE you're planning on using to store the
    backup.
    All Power Macs come with the capability of burning CD's today. Mine can also burn DVD's, so backing up MY files is NOT a problem. I just can't clone my whole drive. Now, I'm not sure how this is pertinent in answering my question about how to properly do a clean install of Tiger and be able to install Classic. My son however, just told me he thinks that all I need to do is to clean-install Tiger. Then, insert the installation CD with classic on it that came with my computer. Find the invisible file, which is a disk image and drag the contents of the disk image to my computer. If anyone can tell me if this is correct, I would appreciate it.

  • How do I perform a clean install of ios8 on my iPhone 5

    I would like to perform a clean install, meaning not putting ios8 on top of ios7.
    Is there an advantage to doing this? When I installed Mavericks on my MBP I had the Genius Bar do it and it was like a new Mac,
    So, my thoughts are that a clean install, starting as if it were a new phone would be the same.
    Is this true?
    How would I do that after backing up through the latest iTunes.
    Would I need to set up pop mail accounts from scratch or would that come back in the restore backups
    As you can see, I am unsure as to the best way to make my iPhone 5 run trouble free with ios8
    Advice and instructions are welcome
    jojoguitar

    Okay....so Apple does have a guide related to Mass deployment which includes a rough way to do a clean OS X Server clean install. You need to use a NetBoot Lion Server as a boot, but it works.
    http://support.apple.com/kb/HT4746
    Use these steps to create a NetRestore image of an un-configured Lion Server:
    Install OS X Lion, and then Lion Server. This server will be used to create the NetRestore image.
    On the server, install the app named "Install Mac OS X Lion" from the Mac App Store (a network connection is required for this process).
    Install the Server Admin Tools from http://support.apple.com/downloads/ on the server.
    Open the "Install Mac OS X Lion" application, and install to an empty volume. This volume can be a spare partition or external hard drive. Be sure to click the Customize button and to select the Lion Server software.
    Once installation is complete, the server will restart from the newly installed volume.  Instead of completing the setup assistant, press Command-Q to quit the assistant.
    Select the option to shut the server down.
    Restart the server and hold the Option key.
    When the Startup Manager appears, select the volume which you've already configured Lion Server on.
    Open System Image Utility and create a NetRestore image from the newly installed (and still un-configured) volume. If you'd prefer to image the volume after it has already been configured, you can proceed with the setup assistant before booting back to the original installation created in step 1.

  • So how does one perform a clean install on U310?

    Hello,
    I'm currently annoyed with software that comes pre-installed on the notebook, and would like to perform a clean install of Windows 7. I've got a bootable USB stick prepared, but don't know what to do next. Also, I'd like to install the system on the SSD drive, not on HDD, and don't want to lose warranty.
    Could someone who already did this make a step-by-step guide, or at least provide some hints? Thanks!

    Hi
    Welcome To Lenovo Community
    First of all Please create a set of recovery media using OKR .
    For installing a fresh OS on SSD you can refer below links
    http://www.overclock.net/t/1156654/seans-windows-7-install-optimization-guide-for-ssds-hdds
    http://www.sevenforums.com/installation-setup/206250-ssd-w-hdd-windows-7-setup-help.html
    Hope This Helps
    Cheers!!!
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with Kudos!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!  This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How can I perform a clean erase and reinstall on my iBook G4?

    Hi everyone,
    I have misplaced a help article that I successfully used to perform a clean erase and reinstall on my iBook G4.
    I've been trying to get the erase and reinstall started by inserting the software restore cd (disk 1 of 8) that came with my computer, but the cd doesn't give the option to erase and restore.
    When I try holding down "c" after restarting (right before I hear the dong sound), it just boots like it normally does and I still don't get the option to erase and install.
    Can someone help?
    Thanks so much,
    Allison

    I don't know fiberoptix. The above poster mentioning 8 disks would be talking about Panther, whereas in your case I am not sure what the second tiger DVD has on it.
    I suggest you post a new topic in the Tiger forum here:
    http://discussions.apple.com/forum.jspa?forumID=752
    as you will get a better response if it is a new topic, and the Tiger forum has a big audience and your question will get more attention.
    Good luck.
    roam

  • How do you perform clean install on mac?

    I just purchased a MBP with Snow Leopard OS and I'm completely mac noob. I want to know how to perform clean install (erase and install) on a mac. Not that I want to do it now. Just want to learn the proper procedures earlier coz this is very beneficial in the future. thanks

    FYI
    I know that you know that there are two kind of installs for Leo: upgrade and erase and install. In principle, there would be little difference between the two. Many here say that upgrading, versus erasing and installing, is the superior procedure. Others feel differently. I say just do what you prefer. My bet is that percentage-wise those getting good installs from an erase and install, particularly if all apps are reinstalled, rather than migrated, is higher than for upgrade--but probably not appreciably higher.
    The processes leading to the final outcome should lead to a good outcome in either case. But, things can go wrong either way. I am not going to try to elaborate much on the specific ways that things could go wrong either way. But, for the most part, they would have to do with the way migration works and the migration technique used (if used), in the case of erase and install, and the existence of problems in the system existing prior to installation in the case of an upgrade.

  • My friend have new Macbook Air with OSX Mavericks and I have Macbook Pro with OSX Mountain Lion, Can I create a bootable maverick in pendrive from macbook air and perform a clean installation/update on my macbook pro with osx mountain lion?

    I have late 2012 edition Macbook Pro, I have a internet connection with does not run smoothly It gets disconnected and reconnects Thus I failed everytime when I update my OSX Mountain Lion to Mavericks in App Store. My friend just bought 2013 end Macbook Air whicch have OSX Mavericks pre installed.
    I was hoping if I can create a OS X version in pendrive from his laptop and use that to install and thuss also update OS on my Mountain Lion.
    Kindly explain me in detail how to perform this.
    I have already taken back up of all files and I am ready to total clean my laptop.
    And I want to update to Maverick so I can thus further update to upcoming OS X Yosemite.

    The Mavericks on the Air is probably machine specific since it came pre-installed, so it wouldn't work on your computer. See if your friend will let you access the App Store, where you can sign in using your Apple ID and download the installer. You can use this free program to copy the installer and update your computer.
    Bootable USB Flash Drive – Diskmaker X

  • How can I do a clean installation of Mavericks 10.9.1 on Late 2013 Retina Macbook Pro

    Hi I need some help -
    I bought a late 2013 15' Retina Macbook Pro and it was shipped with 10.9.0 build number 13A3017.
    Now 10.9.1 is out, and I wanted to download the full installation image and burn it to thumb drive and do a full clean re-installation.
    But I just found Mac App Store doesn't allow me to download the full 5.29GB installation image from https://itunes.apple.com/us/app/os-x...ks/id675248567, and my current 10.9.0 can only be _upgraded_ to 10.9.1 with the 395MB incremental update package from http://support.apple.com/kb/DL1712, this upgrade package is described as "It includes all updates from OS X Mavericks 10.9.1 plus system specific enhancements to improve the stability and compatibility of your Mac."
    So maybe the full 5.29GB 10.9.1 which is available on Mac App Store is not compatible with the 2013 15' Late Retina Macbook Pro?
    I just downloaded the upgrade package from Mac App Store and now I'm running 10.9.1 build number 13B3116 fine.
    So my questions here: I really would like to do a clean full re-installation of 10.9.1. Where can I get the full installation image which is compatible with 2013 15' Late Retina Macbook Pro?

    There is a way to get yourself a fully functional install file for a Late 2013 model.
    1. Format a USB stick
    2. Reboot the Mac, and hold down CMD-R to get into recovery mode
    3. Start a new installation and choose the USB stick as a target. You should be able to choose your normal hard drive as a target, too, because as long as the installer package is downloaded, no data should be erased, but when you decide to use a USB stick, you're on the safe side.
    4. The Mac will be downloading the install package. This takes a while, the time remaining shown is not correct. If you need to have an idea how long it will take you, choose the log from the help menu during download, it will show you how many chunks are already downloaded (it was 504 chunks total for me).
    5. When the download is ready, the Mac reboots automatically, pull the USB stick when it does. If you're not before your computer when this happens, don't worry, when you come back, you will be in the setup program. Just switch your machine off by pressing the power switch for more than 10 seconds, and then pull the stick.
    6. On the stick you will find the "OS X Install ESD.dmg". Copy that file to your Mac (it's the only file you'll need from the stick. After that, you can reformat the stick and use it for the next step).
    7. You can use this file to finally create a bootable USB stick if you follow the instructions that you can find anywhere on the net or in this forum.

  • How To Profile Performance Before & After Installation Of A Solution

    Hi.
    We have third party and custom solutions that we want to install into our SharePoint 2010 Farm.
    We want to find out if there are any performance bottlenecks after the installation so we would like to profile our SharePoint 2010 Farm performance and SQL Server 2008 R2 performance before and after.
    How could we achieve this profile for our Farm overall and both SharePoint 2010 and SQL Server 2008 R2?

    Profiling comes in many flavors...
    - Load Capacity => load test... there are some (slightly outdated) load test templates that you can use to slam your SP environment and determine its load capacity
    - Average usage => performance monitors... use the built in performance monitors, or some dedicated systems (like MS System Center) include application-specific capabilities (System Center has Management Packs)
    - Solution Profiling => performance profilers... a bit harder, since it requires isolating the custom components and comparing data... use the SP dev tools, SQL profiles, logs, etc.
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • How can i performe a clean wipe of my system and reinstall osxlion ?

    Hii i have a macbook pro which i bought in late 2011. I was wondering how i should do a comeplete wipe of all my memory and reinstall lion. I have tried the recovery process but it just reintalls the os and leaves the rest of the data behind.

    Install or Reinstall Lion from Scratch
    If possible backup your files to an external drive or second internal drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
    Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Install button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

Maybe you are looking for