How do you petition to use older applications?

I'm very disappointed that Apple didn't warn that Appleworks and Microsoft Word would no longer be supported in Lion. I've done the download, now wondering how to open these files. I'm a teacher and most of my school documents are Appleworks Draw. Anyone find a solution?

As I said before, you'll need to get a drawing app. If you only occassionally need it and don't want to spend a lot of money go for Sketchbook Express in the Mac App Store. If you do a lot of drawing buy Sketchbook Pro instead ($59.99).
There are other drawing apps available perhaps others will come here and make recommendations.

Similar Messages

How do you create a stand alone application using DAQmx when your application SCXI hardware isn't on the computer I am using to create the application?

How do you create a stand alone application using DAQmx when your application SCXI hardware isn't on the computer I am using to create the application? The DAQmx assitant won't allow me to create a task with hardware that isn't in my system.

You will need to have at least the DAQ device in your computer to add the chassis. When you add the chassis, don't auto detect the modules. You will have to add the terminal blocks and tell MAX which SCXI module will be connected to the DAQ device. Just make sure you don't test the chassis, when its not there.
I hope this helps.
Joshua

I am facing 'How do you want to use this disc' whenever I read/open any lightscribe discs having data.

Hi,
When I insert a lightscribe DVD/CD into a lightscribe optical drive, then when I click to open the DVD, I faced this error 'How do you want to use this disc', although the DVD was full of data. When opening these
lightscribe DVD/CD via NON lightscribe optical drive, I noticed that the DVD/CD opened well without any problems at all.
Also, how can the System show to me 'How do you want to use this disc' , in particular when a DVD is non rewritable(DVD-R) and also contains data)?
Bear in mind, not all DVDs/CDs were not detected. However, only full lightscribe discs' (having data)
However, even blank lightscribe discs were detected without problems. When insert a lightscribe disc having data, then I faced that error. However, when inserting blank lightscribe discs I found that the disc were opened. Also,
non lightscribe discs were opened well.
When checking the device manager, I didn't see any issue with DVD/CD drive. If there were a problem unrecongnising, then I would have seen 'a remarkable mark' in front of it.
Note: I have faced this problem after trying formating a rewritable CD inserted onto the drive. Althouthg the format failed, all data on the disc was deleted. Anyway, after that, then inserting full-lightscribe discs are unregonised
Do you think the problem wth my optical drive. IF so, I would be saying why it wasn't happened with all other non lightscribe discs. If my lightscrib discs were corrupted, then why would they have opened well on another laptop.
I have done:
Press the Windows logo key+R to open the Run dialog box.
Type devmgmt.msc in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then clickUninstall.
When you are prompted to confirm that you want to remove the device, click OK.
Restart the computer.
But the same prolbem is existing.
yes there is a virtual CloneDrive program installed on my PC, however, there is no any CD mounted into it. Even if a CD was mounted into Virtual Clondrive, there would be no problem at all, because the virtual CloneDrive is used to only
mount ISO disc images into it, and not physical discs.
Any I have do what you have said, when inserting a light-scribe disc having data, then I open it, I found this
NOTE: in the above screen shot there is a lightscribe DVD having data inserted. However, in the screen shot below, there a ightsrbe DVD not having data inserted. In the first screen shot, the disc is not reconginsed by Windows, however, in
the second is recognised.
Even when I have inserted a lightscribe disc not having data(empty), it opened well regardless of what virutal CloneDrive is enabled or disabled.
But when cliced on my problem didn't solve,
A man should convert his anger and sadness into strength to continue living in this life.

Hi,
The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
Notebook PC support
The number of my computer is : LM610EA#A2N.
Could anyone please at this splendid forum take some of their precious time
out to really reply my questions and solve my problems?
FIRST OF ALL:
My HP Pavilion Laptop is about 3 years old.
My
sister's Dell Inspiron laptop is 3 years old.
My HP lapotp is well-cared, as opposed to my sister's Inspiron Dell laptop,
which is always thrown in dust without caring at all. Also, its battery is
always inserted even when it is fully charged while the laptop is plugged in to
the main power supply.
However, my laptop is either used on only battery, or on plugin. Also, it is
kept from the dust.
But, I really found that the battery of the Dell laptop
still lasts about three and half hours, and there is no problem cooling fan is
not oproperly preporly.
I only remember one thing differently done on my laptop battery which is I
charged it fully, then I stored it without using it for about four months, then
when I reused it, I found it got worse over time. I.e. first time of using it
after storing,I found it empty, then I charged it again fully, however, then it
lasted about 2 hours, then 1 and half hours, next an hour, now it is only
lasting about 20 minutes without performance. If there is high performance, then
the computer shuts down suddenly.
My problem is follows:::
First: Whenever I inserted any Containing Data OR Data
CD/DVD-R LightScribe discs, I found that HP optical driver was
unable to read them. When clicking on the optical disc drive
'duble-click', then I find that disc opens as this way(NOT: With a CD/DVD player
is grayed out)
Blank Or Used CD, DVD±R,RW lightscirbe is unable to be
read:(clicking on it let it Open like a USB FlashDrive or With a CD,DVD player:
NOTE: with CD/DVD Player is grayed out)
Used CD/DVD±R/RW Non-LightScribe disc opens normal:
Blank CD,DVD±R,RW Non-LightScribe opens normal(Opens like a USB FlashDrive or
With a CD,DVD)::
My HP CD/DVD DVD±R/RW specis are::
Optical Drives
hp CDDVDW TS-L633R
Media Type DVD Writer
Name hp
CDDVDW TS-L633R
Availability Running/Full Power
Capabilities Random
Access, Supports Writing, Supports Removable Media
Read capabilities CD-R,
CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
DL, DVD+R DL
Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-R DL, DVD+R DL
Config Manager Error Code Device is working
properly
Config Manager User Config FALSE
Drive E:
Media Loaded
FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target Id
1
Status OK
Trying to solve the problem,
I have done these steps in order::
I tried checking with dignostic ulitiy:
I have tried Advanced View , this is the file of output data
diagnostic utility
LightScribe System Software Settings:
SOFTWARE\LightScribe\MessageDir
C:\Program Files (x86)\Common
Files\LightScribe\
SOFTWARE\LightScribe\LSPrintDialog C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintDialog.exe
SOFTWARE\LightScribe\LSPrintingDialog
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintingDialog.exe
SOFTWARE\LightScribe\LsPrintLauncher
C:\Program Files (x86)\Common
Files\LightScribe\LSPrintLauncher.dll
SOFTWARE\LightScribe\ResourceDir
C:\Program Files (x86)\Common
Files\LightScribe\res
SOFTWARE\LightScribe\LSPrintAPI C:\Program Files
(x86)\Common
Files\LightScribe\LSPrintAPI.dll
SOFTWARE\LightScribe\Update\UpdateShellCommand
http://www.lightscribe.com/go/downloads/windows
SOFTWARE\LightScribe\Update\PreviousVersion
1.18.20.1
SOFTWARE\LightScribe\Update\CurrentVersion
1.18.27.10
SOFTWARE\LightScribe\Update\TrailingVersion
SYSTEM\CurrentControlSet\Services\LightScribeService\Type
16
SYSTEM\CurrentControlSet\Services\LightScribeService\Start
2
SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl
0
SYSTEM\CurrentControlSet\Services\LightScribeService\
SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName
LightScribeService Direct Disc Labeling
Service
SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName
LocalSystem
SYSTEM\CurrentControlSet\Services\LightScribeService\Description
Used by the LightScribe software components to support 3rd party disc labeling
applications using the LightScribe COM Application Programming Interface
(LSCAPI). This service needs to run for LightScribe direct disc labeling to
work.
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported
7
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0
IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance
2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1
SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Winlogon\allocatecdroms
0
SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
SOFTWARE\INTEL\Intel
Application Accelerator Not detected
Drives and Media:
Drive 0 : hp CDDVDW TS-L633R 0300 219 (E, Media
Imaging Parameter : 114
I tried running the below command line to fix potential disk issue 'Chkdsk
/r /f'
I cleaned the drive, discs, and so on.
I have uninstalled the all third-party data recording software.
I have uninstalled the Cyber DVD suite, lightscribe system software which
came pre-installed with my HP pavilion Notebook.
I have recovered my system from the Factory Recovery discs.
I have tried opening all those LightScibe discs not opening on my HP optical
drive, on a Dell optical drive, and all of them were opened well, although Dell
optical drive did not have a lightscribe feature at all., nor third party disc
recording software
However, the problem is still with opening the discs LIGHT-SCRIBE
Thus, my questions are:
How to determine if the drive is corrupted and needs to be replaced with
another one.
I think there something needed to be done on the BIOS Of my HP
laptop[[[A similar problems happened on my Desktop computer's optical
drive which is as follows:::(ALL discs are opened as empty by Optical Drive of
My Desktop Computer) ---while my optical drive of my desktop was connected to
the primary slave IDE, and the HDD was connected to the
primary master IDE, the optical drive and hard disk are functioning
well. However, I remember that while burning an image with Nero essential V: 5,
something went wrong, and then the Optical Drive of My Desktop Computer
(HL-DT-ST DVD-RAM GH22NP20) became NOT recognised/Installed on
BIOS, although it was still shown on the device manager as a
recognised device. Also, it was listed on my computer, however, when entering a
disc(blank or with data) into the drive, I found it was not recognised, and it
opened empty(no files at it), although it contains data. Thus, I decided to boot
to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was
still shown as installed on BIOS. However, the optical drive was not. Th I tried
clicking on it on BIOS and then clicking on 'enter' to try to let the device be
re-recognized. However, that made no difference. I had to take part my computer
,and then reconnected the optical drive onto the secondary slave
IDE , and let HDD connected to the same primary master IDE.
Then, I found that the problem solved and all discs became being read
normally. Aslo, optical drive became installed on BIOS]]]
What is meant with with double Layer Support.
How much does it cost?
A man should convert his anger and sadness into strength to continue living in this life.

Re: How do you create and use "common" type classes?

Hi,
You have 2 potential solutions in your case :
1- Sub-class TextNullable class of Framework and add your methods in the
sub-class.
This is the way Domain class work. Only Nullable classes are sub-classable.
This is usefull for Data Dictionary.
The code will be located in any partition that uses or references the supplier
plan.
2- Put your add on code on a specific class and instanciate it in your user
classes (client or server).
You could also use interface for a better conception if needed. The code will
also be in any partition that uses or references the supplier plan where your
add on class is located.
If you don't want that code to be on each partition, you could use libraries :
configure as library the utility plan where is your add-on class.
You can find an example of the second case (using a QuickSort class,
GenericArray add-on) with the "QuickSort & List" sample on my personal site
http://perso.club-internet.fr/dnguyen/
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
Robinson, Richard a écrit:
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Hi Richard,
Your question about "utility classes" brings up a number of issues, all of
which are important to long-term success with Forte.
There is no such thing as a static method (method that is associated with a
class but without an implicit object reference - this/self/me "pointer") in
TOOL, nor is there such thing as a global method (method not associated
with a class at all). This is in contrast to C++, which has both, and
Java, which has static methods, but not global classes. Frequently, Forte
developers will write code like this:
result, num : double;
// get initial value for num....
tmpDoubleData : DoubleData = new;
tmpDoubleData.DoubleValue = num;
result = tmpDoubleData.Sqrt().DoubleValue;
tmpDoubleData = NIL; // send a hint to the garbage collector
in places where a C++ programmer would write:
double result, num;
// get initial value for num....
result = Math::Sqrt(num);
or a Java programmer would write:
double result, num;
// get initial value for num....
result = Math.sqrt(num);
The result of this is that you end up allocating an extra object now and
then. In practice, this is not a big deal memory-wise. If you have a
server that is getting a lot of hits, or if you are doing some intense
processing, then you could pre-allocate and reuse the data object. Note
that optimization has its own issues, so you should start by allocating
only when you need the object.
If you are looking for a StringUtil class, then you will want to use an
instance of TextData or TextNullable. If you are looking to add methods,
you could subclass from TextNullable, and add methods. Note that you will
still have to instantiate an object and call methods on that object.
The next issue you raise is where the object resides. As long as you do
not have an anchored object, you will always have a copy of an object on a
partition. If you do not pass the object in a call to another partition,
the object never leaves. If you pass the object to another partition, then
the other partition will have its own copy of the object. This means that
the client and the server will have their own copies, which is the effect
you are looking for.
Some developers new to Forte will try to get around the lack of global
methods in TOOL by creating a user-visible service object and then calling
methods on it. If you have a general utility, like string handling, this
is a bad idea, since a service object can reside only on a single
partition.
Summary:
* You may find everything you want in TextData.
* Unless you anchor the object, the instance will reside where you
intuitively expect it.
* To patch over the lack of static methods in TOOL, simply allocate an
instance when required.
Feel free to email me if you have more questions on this.
At the bottom of each message that goes through the mailing list server,
the address for the list archive is printed:
http://pinehurst.sageit.com/listarchive/.
Good Luck,
CSB
-----Original Message-----
From: Robinson, Richard
Sent: Tuesday, March 02, 1999 5:44 PM
To: '[email protected]'
Subject: How do you create and use "common" type classes?
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance

How come you can not use more than 126GB of a 1.5TB diskdrive with LabVIEW Real Time?

How come you can not use more than 126GB of a 1.5TB diskdrive with LabVIEW Real Time?
This is only 8.3% of the available disk drive space!
http://digital.ni.com/public.nsf/allkb/E7E2F5657B6026358625750B007201A6?OpenDocument
National Instrument's solution is either reformat you drive to less than 126GB or replace the drive with one less than that size.
Please NI, tell me you are going to fix your LabVIEW Real Time soon, and that we won't have to wait for LabVIEW RT 9.2.1 in 2011 for this one to be fixed.
http://upload.wikimedia.org/wikipedia/commons/9/90/Hard_drive_capacity_over_time.svg
Drives as large as 126GB or more have been around since about mid 2002. That's about 7 Years now and LabVIEW Real Time STILL can't use drives larger that 126GB! Please NI. Do something.
We deserve fixes to the old versions of LabVIEW RT. How about updates to LabVIEW RT. Such as 7.0.2, 7.1.2, 7.6.2, 8.0.2, 8.2.2, 8.6.2.
We don't need new features or versions of LabVIEW RT such as 9.0 until we have some of bugs fixed in the existing versions.
Kevin.
Message Edited by kmcdevitt on 05-29-2009 03:39 PM
Solved!
Go to Solution.

Coq rouge wrote:
NI is not making the Real Time OS in house. I do not remember which firm that is making it. Anyway you are allowed to use a hard drive that has been partitioned. And 126GB is some space is it not? I remember Bill Gates declared one time that 640Kb ram should be more than enough for any PC application also in the future
Coq Rouge (formerly t06afre),
The RealTime OS is an NI Product that is purchased from NI.
NI may or may not outsource design, developement, or manufacturing of the products that it sells under its own Company name.
For this reason I would be concerned if I were a PXI Embedded Controller designer/developer in the United States.
Yes, 126GB is some space. I see that there are now 2TB drives available. 126GB would be 6.3% of a new 2TB drive. Should we all be happy with being able to use 6.3% of the available drive space. Moore's Law seams to be alive and well. Drives larger than 126GB have been readily available for 5 or 6 Years. This should not be a surprise to NI. Why don't they do something about it.
Thanks for the trivia on Bill Gates. I must have missed that one since I don't try to keep up with Microsoft. I believe that he is a wonderful person and he and his family are doing wonders for the world in their "retirement". The world needs more like him.
What I do remember is Steve Jobs telling us that we would never need more that 128MB and that we would never to need to do anymore software development because everything was already in the "ToolBox".
McKevin.

I tried to set up a remote desktop between my macmini and my work computer. I hit cancel and now the Remote Desktop will not close. I cannot shut down my computer either. How do you close a non-responsive application. I have tried everything!

I tried to set up a remote desktop connection between my MacMini and my work computer. It was not working so I hit cancel, but then the big black screen of death came up and will not go a way. I cannot close my computer nor quit the remote desktop connection. How do you close a non-responsive application? By the way, I am new to Mac and it is not as simple as hitting the Control, Alt, Delete. Please help.

virginiafromphoenix wrote:
.......How do you close a non-responsive application?.......
Try ( alt + cmd + esc ). Gives you a menu of running applications, and a chance to "Force Quit".

How do you whiten teeth using iPhoto tools?

How do you whiten teeth using iPhoto tools?

You need more powerful editing software for that - iPhoto is good but basic
PhotoShop Elements is a good value - Gimp is open source and free - there are many others
LN

How do you download InDesign using the Adobe Download Manager?

How do you download InDesign using the Adobe Download Manager?

With the Adobe Download Assistant installed you should be able to initiate the download at http://www.adobe.com/cfusion/tdrc/index.cfm?product=indesign. If this is not working for you then please try an alternate web browser.

Tried my k3772-z modem to connect macbook air to internet and got the message: you can't use this application with this version of mac os x. Is there a setting that needs to be changed?

Tried my k3772-z modem to connect macbook air to internet and got the message: you can't use this application with this version of mac os x. Is there a setting that needs to be changed?

I can't help you with a direct answer. For third-party devices you should contact the vendor (Vodafone).
If you have an iPhone (or an Android phone with hot-spot capability) you can use that to connect to the Internet without paying for a separate cellular service.

How do you change an used ipad to a new user with a new itunes account?

How do you cange a used ipad to a new user with a new itunes account?

plug your ipad to your computer, open your itunes, click on the ipad icon, at the first page there is an option to "restore" ipad to its factory settings, click it. Don't remove USB connection, wait until it finishes wiping the data and it should place a new window that asks you to register the ipad.
There you go, your iPad is sync with your itunes account under your name, its best to also use "Find my iPad" just in case it gets lost, you can track it from your computer. Very handy tool and its free!
But if you want the data that is in the iPad, back up it first and sync the content to your library before restoring it to its factory settings
Have a great day and enjoy your iPad

How do you create beans using NetBeans 5.5?

I am referring to http://java.sun.com/docs/books/tutorial/javabeans/nb/index.html and I'm sorry but I can't follow any of this!
I have NetBeans IDE 5.5 and I am trying to learn how to write beans using NetBeans, and the lessons involve things I can't find or understand, for example:
re: http://java.sun.com/docs/books/tutorial/javabeans/writingbean/index.html
<blockquote>
Load the JAR file. Use the NetBeans IDE GUI Builder to load the jar file as follows:
1. Start NetBeans.
2. From the File menu select "New Project" to create a new application for your bean. You can use "Open Project" to add your bean to an existing application.
3. Create a new application using the New Project Wizard.
4. Select a newly created project in the List of Projects, expand the Source Packages node, and select the Default Package element.
5. Click the right mouse button and select New|JFrameForm from the pop-up menu.
6. Select the newly created Form node in the Project Tree. A blank form opens in the GUI Builder view of an Editor tab.
7. Open the Palette Manager for Swing/AWT components by selecting Palette Manager in the Tools menu.
8. In the Palette Manager window select the beans components in the Palette tree and press the "Add from JAR" button.
9. Specify a location for your SimpleBean JAR file and follow the Add from JAR Wizard instructions.
10. Select the Palette and Properties options from the Windows menu.
11. Expand the beans group in the Palette window. The SimpleBean object appears. Drag the SimpleBean object to the GUI Builder panel.
</blockquote>
Sorry, you lost me literally after "Start NetBeans", the rest is Hungarian. I can't find "New Project Wizard"; I can't find "List of Projects", I can't find anything they are talking about nor do I know if any of this is relevant toward my learning how to write beans.
Re: http://java.sun.com/docs/books/tutorial/javabeans/properties/properties.html
"Inspecting Properties" seems impossible to do because the Inspector Window only shows a closed folder and nothing else ever. I can't figure out this part of the tutorial either.
Can someone please explain this 3rd-grade-level to me: How to create a bean using NetBeans?
Thanx
Phil

Phil,
Before you embark on another very frustrating advanture using NetBeans, please go t hrough the NetBeans tutorial. The "New Project Wizard" is just select from the menu options -- "New Project". The "Hungarian" as you put it will not get better until you spend some time learning NetBeans. Learning something new, like beans, is frustrating enough, but to try to do it and use a tool that is not familiar may be beyond many individuals frustration level.
Les

How do you restrict access to custom applications?

When I create portlets, there is usually an associated "admin" functionality that needs to be created for each custom application. An example is a shopping cart that we just created, we needed admins to be able to go in and upload photos.
The way that I do this is I create a new portlet "Shopping Cart Admin" and restrict access to it that way. However, because I usually add everything in the /remoteserver/shoppingcart/. folder to the gateway space (its too painful to add one by one), this means that I can't put admin.aspx in that folder. So I usually end up creating a NEW folder /remoteserver/shoppingcartadmin/ for the admin portlet.
Long story short, its a lot of work. I know that I could try to use activity rights, but those seem very global. How do you control edit access to your custom portlets?

Well, there are a few different ways to go about it. You could add a preferences page with the admin functionality, and then an admin would just have to click the little pencil in the portlet titlebar. No admin/edit access, no little pencil.
I have often set the visibility of an ASPX control directly from activity rights, in OnPageLoad, if it isn't postback time. The activity rights should be inherited by the user, through the user's group. Best practise is to create empty groups called Roles, add activity rights to the Roles, and then have the actual groups (that contain users) inherit from one or more Roles.
You already knew that part, I added it for the others. My personal definition of a portlet is 'polymorphous instance of a web service'.
So:
Role: Store Manager (has Edit Shopping Cart activity right)
^
Group: Store Managers (has Store Manager parent group)
User: Vladimir (inherits Edit Shopping Cart activity right)

How can you type without using capitals at the beginning of a sentence?

How can you type something without using a capital letter at the beginning of a sentence. It always automatically outs a capital letter and I don't want one because it could be a case sensitive password?

Tap the Shift key to turn off caps

How to increment GL Period using Oracle Application concurrent program scheduler

Hi All,
In R12, I came to know that we can increment GL Period also using Oracle Application Concurrent Program scheduler.
We have a requirement to schedule 'Account Analysis Report' for different legal entities. We would need to increment GL Periof for each department.
In 11i, we can not increment GL Period.
Is there a way, to increment GL Period to schedule 'Account Analysis Report'
Please advise.
Appreciate your time and help.
Oracle Application Version: R12.1.2
thanks in advance,
Ganesh

Hi,
could you please help me?
thanks.

How do you register a used Ipad 4

How do you re-register a used Ipad 4

Welcome to the user to User Technical Support Forum provided by Apple.
Clearly state your Issue and the Troubleshooting Steps you have tried to Resolve it.

How do you petition to use older applications?

Similar Messages

Maybe you are looking for